- 26 Mar, 2017 7 commits
-
-
Peter Zijlstra authored
commit e552a838 upstream. Dmitry reported syzcaller tripped a use-after-free in perf_release(). After much puzzlement Oleg spotted the below scenario: Task1 Task2 fork() perf_event_init_task() /* ... */ goto bad_fork_$foo; /* ... */ perf_event_free_task() mutex_lock(ctx->lock) perf_free_event(B) perf_event_release_kernel(A) mutex_lock(A->child_mutex) list_for_each_entry(child, ...) { /* child == B */ ctx = B->ctx; get_ctx(ctx); mutex_unlock(A->child_mutex); mutex_lock(A->child_mutex) list_del_init(B->child_list) mutex_unlock(A->child_mutex) /* ... */ mutex_unlock(ctx->lock); put_ctx() /* >0 */ free_task(); mutex_lock(ctx->lock); mutex_lock(A->child_mutex); /* ... */ mutex_unlock(A->child_mutex); mutex_unlock(ctx->lock) put_ctx() /* 0 */ ctx->task && !TOMBSTONE put_task_struct() /* UAF */ This patch closes the hole by making perf_event_free_task() destroy the task <-> ctx relation such that perf_event_release_kernel() will no longer observe the now dead task. Spotted-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: fweisbec@gmail.com Cc: oleg@redhat.com Fixes: c6e5b732 ("perf: Synchronously clean up child events") Link: http://lkml.kernel.org/r/20170314155949.GE32474@worktop Link: http://lkml.kernel.org/r/20170316125823.140295131@infradead.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 73580dac upstream. On those parisc machines which don't provide a software power off function, the system currently kills the init process at the end of a shutdown and unexpectedly restarts insteads of halting. Fix it by adding a loop which will not return. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Mikulas Patocka authored
commit 5f655322 upstream. The parisc kernel doesn't work with CONFIG_MODVERSIONS since the commit 71810db2. It can't load modules with the error: "module unix: Unknown relocation: 41". The commit changes __kcrctab from 64-bit valus to 32-bit values. The assembler generates R_PARISC_SECREL32 secrel relocation for them and the module loader doesn't support this relocation. This patch adds the R_PARISC_SECREL32 relocation to the module loader. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
John David Anglin authored
commit 316ec062 upstream. The previously submitted patch did not resolve the random segmentation faults observed on the phantom buildd system. There are still unresolved problems with the Debian 4.8 and 4.9 kernels on C8000. The attached patch removes the flush of the offset map pages and does a whole data cache flush for large ranges. No other arch flushes the offset map in these routines as far as I can tell. I have not observed any random segmentation faults on rp3440 in two weeks of testing with 4.10.0 and 4.10.1. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Quinn Tran authored
commit 8b666809 upstream. When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Quinn Tran authored
commit ae940f2c upstream. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Linus Torvalds authored
commit 474c9015 upstream. gcc-7 has an "optimization" pass that completely screws up, and generates the code expansion for the (impossible) case of calling ilog2() with a zero constant, even when the code gcc compiles does not actually have a zero constant. And we try to generate a compile-time error for anybody doing ilog2() on a constant where that doesn't make sense (be it zero or negative). So now gcc7 will fail the build due to our sanity checking, because it created that constant-zero case that didn't actually exist in the source code. There's a whole long discussion on the kernel mailing about how to work around this gcc bug. The gcc people themselevs have discussed their "feature" in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785 but it's all water under the bridge, because while it looked at one point like it would be solved by the time gcc7 was released, that was not to be. So now we have to deal with this compiler braindamage. And the only simple approach seems to be to just delete the code that tries to warn about bad uses of ilog2(). So now "ilog2()" will just return 0 not just for the value 1, but for any non-positive value too. It's not like I can recall anybody having ever actually tried to use this function on any invalid value, but maybe the sanity check just meant that such code never made it out in public. Reported-by:
Laura Abbott <labbott@redhat.com> Cc: John Stultz <john.stultz@linaro.org>, Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
- 22 Mar, 2017 33 commits
-
-
Greg Kroah-Hartman authored
-
Krzysztof Kozlowski authored
commit 28b62b14 upstream. Running TCRYPT with LRW compiled causes spinlock recursion: testing speed of async lrw(aes) (lrw(ecb-aes-s5p)) encryption tcrypt: test 0 (256 bit key, 16 byte blocks): 19007 operations in 1 seconds (304112 bytes) tcrypt: test 1 (256 bit key, 64 byte blocks): 15753 operations in 1 seconds (1008192 bytes) tcrypt: test 2 (256 bit key, 256 byte blocks): 14293 operations in 1 seconds (3659008 bytes) tcrypt: test 3 (256 bit key, 1024 byte blocks): 11906 operations in 1 seconds (12191744 bytes) tcrypt: test 4 (256 bit key, 8192 byte blocks): BUG: spinlock recursion on CPU#1, irq/84-10830000/89 lock: 0xeea99a68, .magic: dead4ead, .owner: irq/84-10830000/89, .owner_cpu: 1 CPU: 1 PID: 89 Comm: irq/84-10830000 Not tainted 4.11.0-rc1-00001-g897ca6d0800d #559 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c010e1ec>] (unwind_backtrace) from [<c010ae1c>] (show_stack+0x10/0x14) [<c010ae1c>] (show_stack) from [<c03449c0>] (dump_stack+0x78/0x8c) [<c03449c0>] (dump_stack) from [<c015de68>] (do_raw_spin_lock+0x11c/0x120) [<c015de68>] (do_raw_spin_lock) from [<c0720110>] (_raw_spin_lock_irqsave+0x20/0x28) [<c0720110>] (_raw_spin_lock_irqsave) from [<c0572ca0>] (s5p_aes_crypt+0x2c/0xb4) [<c0572ca0>] (s5p_aes_crypt) from [<bf1d8aa4>] (do_encrypt+0x78/0xb0 [lrw]) [<bf1d8aa4>] (do_encrypt [lrw]) from [<bf1d8b00>] (encrypt_done+0x24/0x54 [lrw]) [<bf1d8b00>] (encrypt_done [lrw]) from [<c05732a0>] (s5p_aes_complete+0x60/0xcc) [<c05732a0>] (s5p_aes_complete) from [<c0573440>] (s5p_aes_interrupt+0x134/0x1a0) [<c0573440>] (s5p_aes_interrupt) from [<c01667c4>] (irq_thread_fn+0x1c/0x54) [<c01667c4>] (irq_thread_fn) from [<c0166a98>] (irq_thread+0x12c/0x1e0) [<c0166a98>] (irq_thread) from [<c0136a28>] (kthread+0x108/0x138) [<c0136a28>] (kthread) from [<c0107778>] (ret_from_fork+0x14/0x3c) Interrupt handling routine was calling req->base.complete() under spinlock. In most cases this wasn't fatal but when combined with some of the cipher modes (like LRW) this caused recursion - starting the new encryption (s5p_aes_crypt()) while still holding the spinlock from previous round (s5p_aes_complete()). Beside that, the s5p_aes_interrupt() error handling path could execute two completions in case of error for RX and TX blocks. Rewrite the interrupt handling routine and the completion by: 1. Splitting the operations on scatterlist copies from s5p_aes_complete() into separate s5p_sg_done(). This still should be done under lock. The s5p_aes_complete() now only calls req->base.complete() and it has to be called outside of lock. 2. Moving the s5p_aes_complete() out of spinlock critical sections. In interrupt service routine s5p_aes_interrupts(), it appeared in few places, including error paths inside other functions called from ISR. This code was not so obvious to read so simplify it by putting the s5p_aes_complete() only within ISR level. Reported-by:
Nathan Royce <nroycea+kernel@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Daniel Axtens authored
commit aa2be9b3 upstream. Turning on crypto self-tests on a POWER8 shows: alg: hash: Test 1 failed for crc32c-vpmsum 00000000: ff ff ff ff Comparing the code with the Intel CRC32c implementation on which ours is based shows that we are doing an init with 0, not ~0 as CRC32c requires. This probably wasn't caught because btrfs does its own weird open-coded initialisation. Initialise our internal context to ~0 on init. This makes the self-tests pass, and btrfs continues to work. Fixes: 6dd7a82c ("crypto: powerpc - Add POWER8 optimised crc32c") Cc: Anton Blanchard <anton@samba.org> Signed-off-by:
Daniel Axtens <dja@axtens.net> Acked-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Niklas Cassel authored
commit 17fcbd59 upstream. We hang if SIGKILL has been sent, but the task is stuck in down_read() (after do_exit()), even though no task is doing down_write() on the rwsem in question: INFO: task libupnp:21868 blocked for more than 120 seconds. libupnp D 0 21868 1 0x08100008 ... Call Trace: __schedule() schedule() __down_read() do_exit() do_group_exit() __wake_up_parent() This bug has already been fixed for CONFIG_RWSEM_XCHGADD_ALGORITHM=y in the following commit: 04cafed7 ("locking/rwsem: Fix down_write_killable()") ... however, this bug also exists for CONFIG_RWSEM_GENERIC_SPINLOCK=y. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Peter Zijlstra authored
commit 9bbb25af upstream. Thomas spotted that fixup_pi_state_owner() can return errors and we fail to unlock the rt_mutex in that case. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170304093558.867401760@infradead.orgSigned-off-by:
-
Peter Zijlstra authored
commit c236c8e9 upstream. While working on the futex code, I stumbled over this potential use-after-free scenario. Dmitry triggered it later with syzkaller. pi_mutex is a pointer into pi_state, which we drop the reference on in unqueue_me_pi(). So any access to that pointer after that is bad. Since other sites already do rt_mutex_unlock() with hb->lock held, see for example futex_lock_pi(), simply move the unlock before unqueue_me_pi(). Reported-by:
-
Andy Lutomirski authored
commit 5dc855d4 upstream. If one thread mmaps a perf event while another thread in the same mm is in some context where active_mm != mm (which can happen in the scheduler, for example), refresh_pce() would write the wrong value to CR4.PCE. This broke some PAPI tests. Reported-and-tested-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 7911d3f7 ("perf/x86: Only allow rdpmc if a perf_event is mapped") Link: http://lkml.kernel.org/r/0c5b38a76ea50e405f9abe07a13dfaef87c173a1.1489694270.git.luto@kernel.orgSigned-off-by:
-
Jiri Olsa authored
commit 49ec8f5b upstream. The rdtgroup_kn_unlock waits for the last user to release and put its node. But it's calling kernfs_put on the node which calls the rdtgroup_kn_unlock, which might not be the group's directory node, but another group's file node. This race could be easily reproduced by running 2 instances of following script: mount -t resctrl resctrl /sys/fs/resctrl/ pushd /sys/fs/resctrl/ mkdir krava echo "krava" > krava/schemata rmdir krava popd umount /sys/fs/resctrl It triggers the slub debug error message with following command line config: slub_debug=,kernfs_node_cache. Call kernfs_put on the group's node to fix it. Fixes: 60cf5e10 ("x86/intel_rdt: Add mkdir to resctrl file system") Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/1489501253-20248-1-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Andrey Ryabinin authored
commit be3606ff upstream. The kernel doesn't boot with both PROFILE_ANNOTATED_BRANCHES=y and KASAN=y options selected. With branch profiling enabled we end up calling ftrace_likely_update() before kasan_early_init(). ftrace_likely_update() is built with KASAN instrumentation, so calling it before kasan has been initialized leads to crash. Use DISABLE_BRANCH_PROFILING define to make sure that we don't call ftrace_likely_update() from early code before kasan_early_init(). Fixes: ef7f0d6a ("x86_64: add KASan support") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Alexander Potapenko <glider@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: lkp@01.org Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/20170313163337.1704-1-aryabinin@virtuozzo.comSigned-off-by:
-
Peter Zijlstra authored
commit 44fee88c upstream. Subhransu reported that convert_art_to_tsc() isn't working for him. The ART to TSC relation is only set up for systems which use the refined TSC calibration. Systems with known TSC frequency (available via CPUID 15) are not using the refined calibration and therefor the ART to TSC relation is never established. Add the setup to the known frequency init path which skips ART calibration. The init code needs to be duplicated as for systems which use refined calibration the ART setup must be delayed until calibration has been done. The problem has been there since the ART support was introdduced, but only detected now because Subhransu tested the first time on hardware which has TSC frequency enumerated via CPUID 15. Note for stable: The conditional has changed from TSC_RELIABLE to TSC_KNOWN_FREQUENCY. [ tglx: Rewrote changelog and identified the proper 'Fixes' commit ] Fixes: f9677e0f ("x86/tsc: Always Running Timer (ART) correlated clocksource") Reported-by:
"Prusty, Subhransu S" <subhransu.s.prusty@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 87a6b297 upstream. Pavel Machek reported the following warning on x86-32: WARNING: kernel stack frame pointer at f50cdf98 in swapper/2:0 has bad value (null) The warning is caused by the unwinder not realizing that it reached the end of the stack, due to an unusual prologue which gcc sometimes generates for aligned stacks. The prologue is based on a gcc feature called the Dynamic Realign Argument Pointer (DRAP). It's almost always enabled for aligned stacks when -maccumulate-outgoing-args isn't set. This issue is similar to the one fixed by the following commit: 8023e0e2 ("x86/unwind: Adjust last frame check for aligned function stacks") ... but that fix was specific to x86-64. Make the fix more generic to cover x86-32 as well, and also ensure that the return address referred to by the frame pointer is a copy of the original return address. Fixes: acb4608a ("x86/unwind: Create stack frames for saved syscall registers") Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lkml.kernel.org/r/50d4924db716c264b14f1633037385ec80bf89d2.1489465609.git.jpoimboe@redhat.comSigned-off-by:
-
Imre Deak authored
commit 4b84b4a5 upstream. During system resume time initialization the HPD level on LSPCON ports can stay low for an extended amount of time, leading to failed AUX transfers and LSPCON initialization. Fix this by waiting for HPD to get asserted. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99178 Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-3-git-send-email-imre.deak@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> (corrected stable tag) Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Imre Deak authored
commit 2a57d9cc upstream. For LSPCON resume time initialization we need to sample the corresponding pin's HPD level, but this is only available when HPD detection is enabled. Currently we enable detection only when enabling HPD interrupts which is too late, so bring the enabling of detection earlier. This is needed by the next patch. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Imre Deak authored
commit 908764f6 upstream. For LSPCON initialization during system resume we need AUX functionality, but we call the corresponding encoder reset hook with all interrupts disabled. Without interrupts we'll do a poll-wait for AUX transfer completions, which adds a significant delay if the transfers timeout/need to be retried for some reason. Fix this by enabling interrupts before calling the reset hooks. Note that while this will enable AUX interrupts it will keep HPD interrupts disabled, in a similar way to the init time output setup code. This issue existed since LSPCON support was added. v2: - Rebased on drm-tip. Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480448429-27739-1-git-send-email-imre.deak@intel.com (rebased onto v4.10.4 due to missing s/dev/dev_priv/ upstream change) (corrected stable tag) Signed-off-by:
-
Shanker Donthineni authored
commit 90922a2d upstream. On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 68925176 upstream. When invalidating guest TLBs, special care must be taken to actually shoot the guest TLBs and not the host ones if we're running on a VHE system. This is controlled by the HCR_EL2.TGE bit, which we forget to clear before invalidating TLBs. Address the issue by introducing two wrappers (__tlb_switch_to_guest and __tlb_switch_to_host) that take care of both the VTTBR_EL2 and HCR_EL2.TGE switching. Reported-by:
Tomasz Nowicki <tnowicki@caviumnetworks.com> Tested-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 72ef9c41 ] This patch fixes a memory leak, which happens if the connection request is not fulfilled between parsing the DCCP options and handling the SYN (because e.g. the backlog is full), because we forgot to free the list of ack vectors. Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit b20e2d54 ] aszlig observed failing ssh tunnels (-w) during initialization since commit cc9da6cc ("ipv6: addrconf: use stable address generator for ARPHRD_NONE"). We already had reports that the mentioned commit breaks Juniper VPN connections. I can't clearly say that the Juniper VPN client has the same problem, but it is worth a try to hint to this patch. Because of the early generation of link local addresses, the kernel now can start asking for routers on the local subnet much earlier than usual. Those router solicitation packets arrive inside the ssh channels and should be transmitted to the tun fd before the configuration scripts might have upped the interface and made it ready for transmission. ssh polls on the interface and receives back a POLL_OUT. It tries to send the earily router solicitation packet to the tun interface. Unfortunately it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh doesn't retry again and considers the tun interface broken forever. Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131 Fixes: cc9da6cc ("ipv6: addrconf: use stable address generator for ARPHRD_NONE") Cc: Bjørn Mork <bjorn@mork.no> Reported-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by:
Jonas Lippuner <jonas@lippuner.ca> Cc: Jonas Lippuner <jonas@lippuner.ca> Reported-by:
aszlig <aszlig@redmoonstudios.org> Cc: aszlig <aszlig@redmoonstudios.org> Signed-off-by:
-
Jon Maxwell authored
[ Upstream commit 45caeaa5 ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)
↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb33206 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by:Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
-
Andrey Vagin authored
[ Upstream commit 91864f58 ] The previous idea was to check whether a net namespace is in net_exit_list or not. It doesn't work, because net->exit_list is used in __register_pernet_operations and __unregister_pernet_operations where all namespaces are added to a temporary list to make cleanup in a error case, so list_empty(&net->exit_list) always returns false. Reported-by:
Mantas Mikulėnas <grawity@gmail.com> Fixes: 002d8a1a ("net: skip genenerating uevents for network namespaces that are exiting") Signed-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit a13b2082 ] Andreas reports kernel oops during rmmod of the br_netfilter module. Hannes debugged the oops down to a NULL rt6info->rt6i_indev. Problem is that br_netfilter has the nasty concept of adding a fake rtable to skb->dst; this happens in a br_netfilter prerouting hook. A second hook (in bridge LOCAL_IN) is supposed to remove these again before the skb is handed up the stack. However, on module unload hooks get unregistered which means an skb could traverse the prerouting hook that attaches the fake_rtable, while the 'fake rtable remove' hook gets removed from the hooklist immediately after. Fixes: 34666d46 ("netfilter: bridge: move br_netfilter out of the core") Reported-by:
Andreas Karis <akaris@redhat.com> Debugged-by:
Florian Westphal <fw@strlen.de> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 79e49503 ] ip6_fragment, in case skb has a fraglist, checks if the skb is cloned. If it is, it will move to the 'slow path' and allocates new skbs for each fragment. However, right before entering the slowpath loop, it updates the nexthdr value of the last ipv6 extension header to NEXTHDR_FRAGMENT, to account for the fragment header that will be inserted in the new ipv6-fragment skbs. In case original skb is cloned this munges nexthdr value of another skb. Avoid this by doing the nexthdr update for each of the new fragment skbs separately. This was observed with tcpdump on a bridge device where netfilter ipv6 reassembly is active: tcpdump shows malformed fragment headers as the l4 header (icmpv6, tcp, etc). is decoded as a fragment header. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
-
Sabrina Dubroca authored
[ Upstream commit 67e19400 ] Commit 27596472 ("ipv6: fix ECMP route replacement") introduced a loop that removes all siblings of an ECMP route that is being replaced. However, this loop doesn't stop when it has replaced siblings, and keeps removing other routes with a higher metric. We also end up triggering the WARN_ON after the loop, because after this nsiblings < 0. Instead, stop the loop when we have taken care of all routes with the same metric as the route being replaced. Reproducer: =========== #!/bin/sh ip netns add ns1 ip netns add ns2 ip -net ns1 link set lo up for x in 0 1 2 ; do ip link add veth$x netns ns2 type veth peer name eth$x netns ns1 ip -net ns1 link set eth$x up ip -net ns2 link set veth$x up done ip -net ns1 -6 r a 2000::/64 nexthop via fe80::0 dev eth0 \ nexthop via fe80::1 dev eth1 nexthop via fe80::2 dev eth2 ip -net ns1 -6 r a 2000::/64 via fe80::42 dev eth0 metric 256 ip -net ns1 -6 r a 2000::/64 via fe80::43 dev eth0 metric 2048 echo "before replace, 3 routes" ip -net ns1 -6 r | grep -v '^fe80\|^ff00' echo ip -net ns1 -6 r c 2000::/64 nexthop via fe80::4 dev eth0 \ nexthop via fe80::5 dev eth1 nexthop via fe80::6 dev eth2 echo "after replace, only 2 routes, metric 2048 is gone" ip -net ns1 -6 r | grep -v '^fe80\|^ff00' Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
David Ahern authored
[ Upstream commit 79099aab ] Multipath routes can be rendered usesless when a device in one of the paths is deleted. For example: $ ip -f mpls ro ls 100 nexthop as to 200 via inet 172.16.2.2 dev virt12 nexthop as to 300 via inet 172.16.3.2 dev br0 101 nexthop as to 201 via inet6 2000:2::2 dev virt12 nexthop as to 301 via inet6 2000:3::2 dev br0 $ ip li del br0 When br0 is deleted the other hop is not considered in mpls_select_multipath because of the alive check -- rt_nhn_alive is 0. rt_nhn_alive is decremented once in mpls_ifdown when the device is taken down (NETDEV_DOWN) and again when it is deleted (NETDEV_UNREGISTER). For a 2 hop route, deleting one device drops the alive count to 0. Since devices are taken down before unregistering, the decrement on NETDEV_UNREGISTER is redundant. Fixes: c89359a4 ("mpls: support for dead routes") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit e37791ec ] When the mpls_router module is unloaded, mpls routes are deleted but notifications are not sent to userspace leaving userspace caches out of sync. Add the call to mpls_notify_route in mpls_net_exit as routes are freed. Fixes: 0189197f ("mpls: Basic routing support") Signed-off-by:
-
Etienne Noss authored
[ Upstream commit 52491c76 ] tcf_connmark_init does not check in its configuration if TCA_CONNMARK_PARMS is set, resulting in a null pointer dereference when trying to access it. [501099.043007] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [501099.043039] IP: [<ffffffffc10c60fb>] tcf_connmark_init+0x8b/0x180 [act_connmark] ... [501099.044334] Call Trace: [501099.044345] [<ffffffffa47270e8>] ? tcf_action_init_1+0x198/0x1b0 [501099.044363] [<ffffffffa47271b0>] ? tcf_action_init+0xb0/0x120 [501099.044380] [<ffffffffa47250a4>] ? tcf_exts_validate+0xc4/0x110 [501099.044398] [<ffffffffc0f5fa97>] ? u32_set_parms+0xa7/0x270 [cls_u32] [501099.044417] [<ffffffffc0f60bf0>] ? u32_change+0x680/0x87b [cls_u32] [501099.044436] [<ffffffffa4725d1d>] ? tc_ctl_tfilter+0x4dd/0x8a0 [501099.044454] [<ffffffffa44a23a1>] ? security_capable+0x41/0x60 [501099.044471] [<ffffffffa470ca01>] ? rtnetlink_rcv_msg+0xe1/0x220 [501099.044490] [<ffffffffa470c920>] ? rtnl_newlink+0x870/0x870 [501099.044507] [<ffffffffa472cc61>] ? netlink_rcv_skb+0xa1/0xc0 [501099.044524] [<ffffffffa47073f4>] ? rtnetlink_rcv+0x24/0x30 [501099.044541] [<ffffffffa472c634>] ? netlink_unicast+0x184/0x230 [501099.044558] [<ffffffffa472c9d8>] ? netlink_sendmsg+0x2f8/0x3b0 [501099.044576] [<ffffffffa46d8880>] ? sock_sendmsg+0x30/0x40 [501099.044592] [<ffffffffa46d8e03>] ? SYSC_sendto+0xd3/0x150 [501099.044608] [<ffffffffa425fda1>] ? __do_page_fault+0x2d1/0x510 [501099.044626] [<ffffffffa47fbd7b>] ? system_call_fast_compare_end+0xc/0x9b Fixes: 22a5dc0e ("net: sched: Introduce connmark action") Signed-off-by:
Étienne Noss <etienne.noss@wifirst.fr> Signed-off-by:
Victorien Molle <victorien.molle@wifirst.fr> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Lendacky, Thomas authored
[ Upstream commit d7aba644 ] Depending on the hardware, the amd-xgbe driver may use disable_irq_nosync() and enable_irq() when an interrupt is received to process Rx packets. If the napi_complete_done() return value isn't checked an unbalanced enable for the IRQ could result, generating a warning stack trace. Update the driver to only enable interrupts if napi_complete_done() returns true. Reported-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit 745cb7f8 ] Replace MAX_ADDR_LEN with its numeric value to fix the following linux/packet_diag.h userspace compilation error: /usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function) __u8 pdmc_addr[MAX_ADDR_LEN]; This is not the first case in the UAPI where the numeric value of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h already does the same: $ grep MAX_ADDR_LEN include/uapi/linux/if_link.h __u8 mac[32]; /* MAX_ADDR_LEN */ There are no UAPI headers besides these two that use MAX_ADDR_LEN. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 294acf1c ] The gso code of several tunnels type (gre and udp tunnels) takes for granted that the skb->inner_protocol is properly initialized and drops the packet elsewhere. On the forwarding path no one is initializing such field, so gro encapsulated packets are dropped on forward. Since commit 38720352 ("gre: Use inner_proto to obtain inner header protocol"), this can be reproduced when the encapsulated packets use gre as the tunneling protocol. The issue happens also with vxlan and geneve tunnels since commit 8bce6d7d ("udp: Generalize skb_udp_segment"), if the forwarding host's ingress nic has h/w offload for such tunnel and a vxlan/geneve device is configured on top of it, regardless of the configured peer address and vni. To address the issue, this change initialize the inner_protocol field for encapsulated packets in both ipv4 and ipv6 gro complete callbacks. Fixes: 38720352 ("gre: Use inner_proto to obtain inner header protocol") Fixes: 8bce6d7d ("udp: Generalize skb_udp_segment") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit f7887d40 ] KASAN detected a use-after-free: [ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0 [ 269.467067] Read of size 4 by task ssh/1879 [ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249 [ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 269.467067] Call Trace: [ 269.467067] dump_stack+0x81/0xb6 [ 269.467067] kasan_object_err+0x21/0x78 [ 269.467067] kasan_report+0x2f7/0x450 [ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf] [ 269.467067] ? ip_output+0xa4/0xdb [ 269.467067] __asan_load4+0x6b/0x6d [ 269.467067] vrf_xmit+0x7f1/0x827 [vrf] ... Which corresponds to the skb access after xmit handling. Fix by saving skb->len and using the saved value to update stats. Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit 3331aa37 ] This restores the ability to set a team device's mtu to anything higher than 1500. Similar to the reported issue with bonding, the team driver calls ether_setup(), which sets an initial max_mtu of 1500, while the underlying hardware can handle something much larger. Just set it to ETH_MAX_MTU to support all possible values, and the limitations of the underlying devices will prevent setting anything too large. Fixes: 91572088 ("net: use core MTU range checking in core net infra") CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 62f8f4d9 ] Dmitry reported crashes in DCCP stack [1] Problem here is that when I got rid of listener spinlock, I missed the fact that DCCP stores a complex state in struct dccp_request_sock, while TCP does not. Since multiple cpus could access it at the same time, we need to add protection. [1] BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541 at addr ffff88003713be68 Read of size 8 by task syz-executor2/8457 CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x292/0x398 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:162 print_address_description mm/kasan/report.c:200 [inline] kasan_report_error mm/kasan/report.c:289 [inline] kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311 kasan_report mm/kasan/report.c:332 [inline] __asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332 dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 </IRQ> do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline] ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123 ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162 ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501 inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179 dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141 dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280 dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362 dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 SYSC_sendto+0x660/0x810 net/socket.c:1687 SyS_sendto+0x40/0x50 net/socket.c:1655 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x4458b9 RSP: 002b:00007f8ceb77bb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 00000000004458b9 RDX: 0000000000000023 RSI: 0000000020e60000 RDI: 0000000000000017 RBP: 00000000006e1b90 R08: 00000000200f9fe1 R09: 0000000000000020 R10: 0000000000008010 R11: 0000000000000282 R12: 00000000007080a8 R13: 0000000000000000 R14: 00007f8ceb77c9c0 R15: 00007f8ceb77c700 Object at ffff88003713be50, in cache kmalloc-64 size: 64 Allocated: PID = 8446 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738 kmalloc include/linux/slab.h:490 [inline] dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467 dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487 __feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741 dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949 dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012 dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423 dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217 dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377 dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632 sk_backlog_rcv include/net/sock.h:893 [inline] __sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479 dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 Freed: PID = 15 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 [inline] kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578 slab_free_hook mm/slub.c:1355 [inline] slab_free_freelist_hook mm/slub.c:1377 [inline] slab_free mm/slub.c:2954 [inline] kfree+0xe8/0x2b0 mm/slub.c:3874 dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418 dccp_feat_entry_destructor net/dccp/feat.c:416 [inline] dccp_feat_list_pop net/dccp/feat.c:541 [inline] dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 Memory state around the buggy address: ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb ^ Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
-
Alexey Khoroshilov authored
[ Upstream commit 6c4dc75c ] Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
