- 23 May, 2014 28 commits
-
-
Lad, Prabhakar authored
this patch adds support to release the buffer by calling vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED if start_streaming() call back fails. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Daeseok Youn authored
smatch says: drivers/media/usb/s2255/s2255drv.c:2246 s2255_probe() warn: possible memory leak of 'dev' Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Himangi Saraogi authored
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions.The label err_register is removed as it is no longer required. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Masanari Iida authored
Fix format string mismatch in bw-qcam.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ricardo Ribalda authored
vb2_get_vma() copy the content of the vma to a new structure but set some of its pointers to NULL. One of this pointer is used by follow_pte() called by follow_pfn() on io memory. This can lead to a NULL pointer derreference. The version of vma that has not been cleared must be used. [ 406.143320] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 406.143427] IP: [<ffffffff8115204c>] follow_pfn+0x2c/0x70 [ 406.143491] PGD 6c3f0067 PUD 6c3ef067 PMD 0 [ 406.143546] Oops: 0000 [#1] SMP [ 406.143587] Modules linked in: qtec_mem qt5023_video qtec_testgen qtec_xform videobuf2_core gpio_xilinx videobuf2_vmalloc videobuf2_dma_sg qtec_cmosis videobuf2_memops qtec_pcie qtec_white fglrx(PO) qt5023 spi_xilinx spi_bitbang [ 406.143852] CPU: 0 PID: 299 Comm: tracker Tainted: P O 3.13.0-qtec-standard #10 [ 406.143927] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 04/04/2013 [ 406.144000] task: ffff880085c82d60 ti: ffff880085abe000 task.ti: ffff880085abe000 [ 406.144067] RIP: 0010:[<ffffffff8115204c>] [<ffffffff8115204c>] follow_pfn+0x2c/0x70 [ 406.144145] RSP: 0018:ffff880085abf888 EFLAGS: 00010296 [ 406.144195] RAX: 0000000000000000 RBX: ffff880085abf8e0 RCX: ffff880085abf888 [ 406.144260] RDX: ffff880085abf890 RSI: 00007fc52e173000 RDI: ffff8800863cbe40 [ 406.144325] RBP: ffff880085abf8a8 R08: 0000000000000018 R09: ffff8800863cbf00 [ 406.144388] R10: ffff880086703b80 R11: 00000000000001e0 R12: 0000000000018000 [ 406.144452] R13: 0000000000000000 R14: ffffea0000000000 R15: ffff88015922fea0 [ 406.144517] FS: 00007fc536e7c740(0000) GS:ffff88015ec00000(0000) knlGS:0000000000000000 [ 406.144591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.144644] CR2: 0000000000000040 CR3: 0000000066c9d000 CR4: 00000000000007f0 [ 406.144708] Stack: [ 406.144731] 0000000000018000 00007fc52e18b000 0000000000000000 00007fc52e173000 [ 406.144813] ffff880085abf918 ffffffffa083b2fd ffff880085ab1ba8 0000000000000000 [ 406.144894] 0000000000000000 0000000100000000 ffff880085abf928 ffff880159a20800 [ 406.144976] Call Trace: [ 406.145011] [<ffffffffa083b2fd>] vb2_dma_sg_get_userptr+0x14d/0x310 [videobuf2_dma_sg] [ 406.145089] [<ffffffffa08507df>] __qbuf_userptr+0xbf/0x3e0 [videobuf2_core] [ 406.147229] [<ffffffffa0041454>] ? mc_heap_lock_memory+0x1f4/0x490 [fglrx] [ 406.149234] [<ffffffff813428f3>] ? cpumask_next_and+0x23/0x50 [ 406.151223] [<ffffffff810b2e38>] ? enqueue_task_fair+0x658/0xde0 [ 406.153199] [<ffffffff81061888>] ? native_smp_send_reschedule+0x48/0x60 [ 406.155184] [<ffffffff815836b9>] ? get_ctrl+0xa9/0xd0 [ 406.157161] [<ffffffff8116f4e4>] ? __kmalloc+0x1a4/0x1b0 [ 406.159135] [<ffffffffa0850b9c>] ? __vb2_queue_alloc+0x9c/0x4a0 [videobuf2_core] [ 406.161130] [<ffffffffa0852d08>] __buf_prepare+0x1a8/0x210 [videobuf2_core] [ 406.163171] [<ffffffffa0854c57>] __vb2_qbuf+0x27/0xcc [videobuf2_core] [ 406.165229] [<ffffffffa0851dfd>] vb2_queue_or_prepare_buf+0x1ed/0x270 [videobuf2_core] [ 406.167325] [<ffffffffa0854c30>] ? vb2_ioctl_querybuf+0x30/0x30 [videobuf2_core] [ 406.169419] [<ffffffffa0851e9c>] vb2_qbuf+0x1c/0x20 [videobuf2_core] [ 406.171508] [<ffffffffa0851ef8>] vb2_ioctl_qbuf+0x58/0x70 [videobuf2_core] [ 406.173604] [<ffffffff8157d3a8>] v4l_qbuf+0x48/0x60 [ 406.175681] [<ffffffff8157b29c>] __video_do_ioctl+0x2bc/0x340 [ 406.177779] [<ffffffff8116f43c>] ? __kmalloc+0xfc/0x1b0 [ 406.179883] [<ffffffff8157cd0e>] ? video_usercopy+0x7e/0x470 [ 406.181961] [<ffffffff8157ce81>] video_usercopy+0x1f1/0x470 [ 406.184021] [<ffffffff8157afe0>] ? v4l_printk_ioctl+0xb0/0xb0 [ 406.186085] [<ffffffff810ae1ed>] ? account_system_time+0x8d/0x190 [ 406.188149] [<ffffffff8157d115>] video_ioctl2+0x15/0x20 [ 406.190216] [<ffffffff815781b3>] v4l2_ioctl+0x123/0x160 [ 406.192251] [<ffffffff810ce415>] ? rcu_eqs_enter+0x65/0xa0 [ 406.194256] [<ffffffff81186b28>] do_vfs_ioctl+0x88/0x560 [ 406.196258] [<ffffffff810ae145>] ? account_user_time+0x95/0xb0 [ 406.198262] [<ffffffff810ae6a4>] ? vtime_account_user+0x44/0x70 [ 406.200215] [<ffffffff81187091>] SyS_ioctl+0x91/0xb0 [ 406.202107] [<ffffffff817be109>] tracesys+0xd0/0xd5 [ 406.203946] Code: 66 66 66 90 48 f7 47 50 00 44 00 00 b8 ea ff ff ff 74 52 55 48 89 e5 53 48 89 d3 48 8d 4d e0 48 8d 55 e8 48 83 ec 18 48 8b 47 40 <48> 8b 78 40 e8 8b fe ff ff 85 c0 75 27 48 8b 55 e8 48 b9 00 f0 [ 406.208011] RIP [<ffffffff8115204c>] follow_pfn+0x2c/0x70 [ 406.209908] RSP <ffff880085abf888> [ 406.211760] CR2: 0000000000000040 [ 406.213676] ---[ end trace 996d9f64e6739a04 ]--- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Pali Rohár authored
This patch fixes an off by one check in bcm2048_set_region(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Kirill Tkhai authored
Function del_timer() does not guarantee that timer was really deleted. If the timer handler is beeing executed at the moment, the function does nothing. So, we have a race between del_timer() and kfree(), and it's possible to use already freed memory in the handler. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jinqiang Zeng authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dan Carpenter authored
The else statement here is not aligned with the correct if statement. I think the code works as intended and it's just the indenting which is wrong. Also kernel style says we should use curly braces here so I have added those. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Bartlomiej Zolnierkiewicz authored
devm_ioremap_resource() returns a pointer to the remapped memory or an ERR_PTR() encoded error code on failure. Fix the checks inside csc_create() and sc_create() accordingly. Cc: Archit Taneja <archit@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Archit Taneja<archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
em28xx_compression_disable() is a single line function which is called only one time and this call also isn't needed. Register 0x26 is always configured as part of the scaler configuration, which in turn is always done when the resolution changes. And the initial resolution setting is applied at first device open. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
Just driver cleanup. No functional changes. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
No functional changes. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Allow the system to merge CPU wakeups by specifying different minimum and maximum usleep values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Instead of implementing usleep_range-based poll loops manually (and slightly differently), create a generic iss_poll_wait_timeout() macro and use it through the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The error was reported by checkpatch.pl. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Now that the VIDEO_OMAP4_DEBUG Kconfig option has been removed in favour of dynamic printk, the DEBUG macro isn't defined anymore. Don't check for it to guard IRQ debugging messages compilation, as they're already guarded by the ISS_ISR_DEBUG macro. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Paul Bolle authored
The option was supposed to control the definition of the DEBUG macro in the Makefile but has been left unused by mistake. Given that debugging should be enabled using dynamic printk, remote the Kconfig option. [Reworked the commit message] Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sakari Ailus authored
Prepare for supporting systems using the Device tree. Should the resources not be available at the time of driver probe(), the EPROBE_DEFER error code must be also returned from its probe function. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sakari Ailus authored
Do not use our special value, SMIAPP_NO_XSHUTDOWN. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sakari Ailus authored
Rename "VANA" regulator as "vana". Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sakari Ailus authored
The "best" value was unsigned however, leading to signed-to-unsigned comparison and wrong results. Possibly only on a newer GCC. Fix this by making the best value signed as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sakari Ailus authored
Some of the limits are used before the limits quirk is called. Move the call immediately after obtaining the limits. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sakari Ailus authored
This makes constructing quirks easier. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Olivier Langlois authored
timestamps in v4l2 buffers returned to userspace are updated in uvc_video_clock_update() which uses timestamps fetched from uvc_video_clock_decode() by calling unconditionally ktime_get_ts(). Hence setting the module clock param to realtime has no effect before this patch. This has been tested with ffmpeg: ffmpeg -y -f v4l2 -input_format yuyv422 -video_size 640x480 -framerate 30 -i /dev/video0 \ -f alsa -acodec pcm_s16le -ar 16000 -ac 1 -i default \ -c:v libx264 -preset ultrafast \ -c:a libfdk_aac \ out.mkv and inspecting the v4l2 input starting timestamp. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Olivier Langlois <olivier@trillion01.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Anton Leontiev authored
Set error bit for incomplete buffers when end of buffer is detected by FID toggling (for example when last transaction with EOF is lost). This prevents passing incomplete buffers to the userspace. Signed-off-by: Anton Leontiev <bunder@t-25.ru> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 22 May, 2014 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 3.15-rc6 * tag 'v3.15-rc6': (1314 commits) Linux 3.15-rc6 Btrfs: send, fix incorrect ref access when using extrefs Btrfs: fix EIO on reading file after ioctl clone works on it scripts/checksyscalls.sh: Make renameat optional asm-generic: Add renameat2 syscall ia64: add renameat2 syscall parisc: add renameat2 syscall m68k: add renameat2 syscall sysfs: make sure read buffer is zeroed ahci: imx: PLL clock needs 100us to settle down PCI: Wrong register used to check pending traffic target: fix memory leak on XCOPY random: fix BUG_ON caused by accounting simplification clk: tegra: Fix wrong value written to PLLE_AUX staging: rtl8723au: Do not reset wdev->iftype in netdev_close() ACPI / video: Revert native brightness quirk for ThinkPad T530 staging: rtl8723au: Use correct pipe type for USB interrupts crush: decode and initialize chooseleaf_vary_r libceph: fix corruption when using page_count 0 page in rbd arm64: fix pud_huge() for 2-level pagetables ...
-
- 21 May, 2014 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull two powerpc fixes from Ben Herrenschmidt: "Here are a couple of fixes for 3.15. One from Anton fixes a nasty regression I introduced when trying to fix a loss of irq_work whose consequences is that we can completely lose timer interrupts on a CPU... not pretty. The other one is a change to our PCIe reset hook to use a firmware call instead of direct config space accesses to trigger a fundamental reset on the root port. This is necessary so that the FW gets a chance to disable the link down error monitoring, which would otherwise trip and cause subsequent fatal EEH error" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: irq work racing with timer interrupt can result in timer interrupt hang powerpc/powernv: Reset root port in firmware
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull two btrfs fixes from Chris Mason: "This has two fixes that we've been testing for 3.16, but since both are safe and fix real bugs, it makes sense to send for 3.15 instead" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: send, fix incorrect ref access when using extrefs Btrfs: fix EIO on reading file after ioctl clone works on it
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull two ceph fixes from Sage Weil: "The first patch fixes a problem when we have a page count of 0 for sendpage which is triggered by zfs. The second fixes a bug in CRUSH that was resolved in the userland code a while back but fell through the cracks on the kernel side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: crush: decode and initialize chooseleaf_vary_r libceph: fix corruption when using page_count 0 page in rbd
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull xfs fixes from Dave Chinner: "Code inspection of the XFS error number sign translations found a bunch of issues, including returning incorrectly signed errors for some data integrity operations. These leak to userspace and result in applications not getting the errors correctly reported. Hence they need fixing sooner rather than later. A couple of the bugs are in data integrity operations, a couple more are in the new COLLAPSE_RANGE code. One of these came in through a recent ext4 merge and so I had to update the base tree to 3.15-rc5 before fixing the issues" * tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs: xfs: list_lru_init returns a negative error xfs: negate xfs_icsb_init_counters error value xfs: negate mount workqueue init error value xfs: fix wrong err sign on xfs_set_acl() xfs: fix wrong errno from xfs_initxattrs xfs: correct error sign on COLLAPSE_RANGE errors xfs: xfs_commit_metadata returns wrong errno xfs: fix incorrect error sign in xfs_file_aio_read xfs: xfs_dir_fsync() returns positive errno
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull renameat2 arch support from Miklos Szeredi: "I've collected architecture patches for the renameat2 syscall that maintainers acked and/or asked me to queue. This adds architecture support for the renameat2 syscall to m68k, parisc, ia64 and through asm-generic to arc, arm64, c6x, hexagon, metag, openrisc, score, tile, unicore32" * 'renameat2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: scripts/checksyscalls.sh: Make renameat optional asm-generic: Add renameat2 syscall ia64: add renameat2 syscall parisc: add renameat2 syscall m68k: add renameat2 syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "Three fixes for the AMD IOMMU driver: - fix a locking issue around get_user_pages() - fix two issues with device aliasing and exclusion range handling" * tag 'iommu-fixes-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: fix enabling exclusion range for an exact device iommu/amd: Take mmap_sem when calling get_user_pages iommu/amd: Fix interrupt remapping for aliased devices
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull iscsi_ibft fix from Konrad Rzeszutek Wilk: "Fix iBFT regression on Broadcom NICs introduced in 3.2" * tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: Fix finding Broadcom specific ibft sign
-
Linus Torvalds authored
Merge tag 'renesas-sh-drivers-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH driver fix from Simon Horman: "Compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI This resolves a regression introduced in v3.14 by commit bf98c1ea ("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY")" * tag 'renesas-sh-drivers-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Most of the changes are drivers fixes (rtl28xuu, fc2580, ov7670, davinci, gspca, s5p-fimc and s5c73m3). There is also a compat32 fix and one infoleak fixup at the media controller" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode [media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space [media] media-device: fix infoleak in ioctl media_enum_entities() [media] fc2580: fix tuning failure on 32-bit arch [media] Prefer gspca_sonixb over sn9c102 for all devices [media] media: davinci: vpfe: make sure all the buffers unmapped and released [media] staging: media: davinci: vpfe: make sure all the buffers are released [media] media: davinci: vpbe_display: fix releasing of active buffers [media] media: davinci: vpif_display: fix releasing of active buffers [media] media: davinci: vpif_capture: fix releasing of active buffers [media] s5p-fimc: Fix YUV422P depth [media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function [media] rtl28xxu: silence error log about disabled rtl2832_sdr module [media] rtl28xxu: do not hard depend on staging SDR module
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are five staging driver fixes for 3.15-rc6 that resolve some reported issues. They are for the imx and rtl8723au drivers" * tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723au: Do not reset wdev->iftype in netdev_close() staging: rtl8723au: Use correct pipe type for USB interrupts imx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus' imx-drm: imx-drm-core: skip components whose parent device is disabled imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id
-