Convert the UniPhier thermal monitor binding to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the UniPhier USB3-PHY controller for SS/HS to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the UniPhier USB2-PHY conroller to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the UniPhier PCIe-PHY controller to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Renesas OS Timer (OSTM) Device Tree binding documentation to
json-schema.

Document missing properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Renesas Watchdog Timer (WDT) Controller Device Tree binding
documentation to json-schema.

Add missing "renesas,r8a77980-wdt" compatible value.
Document missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Renesas General-Purpose Input/Output Ports (GPIO) Device
Tree binding documentation to json-schema.

Drop the deprecated "renesas,gpio-rcar" compatible value.
Document missing properties.
Drop the first example, as it doesn't add much value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the ingenic,uart.txt to a new ingenic,uart.yaml file.

A few things were changed in the process:
- the dmas and dma-names properties are now required.
- the ingenic,jz4770-uart and ingenic,jz4775-uart compatible strings now
  require the ingenic,jz4760-uart string to be used as fallback, since
  the hardware is compatible.
- the ingenic,jz4725b-uart compatible string was added, with a fallback
  to ingenic,jz4740-uart.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i2c-jz4780.txt file to ingenic,i2c.yaml.

Two things were changed in the process:
- the clock-frequency property can now only be set to the two values
  that can be set by the hardware;
- the dmas and dma-names properties are now required.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[robh: add ref to i2c-controller.yaml]
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the ingenic,intc.txt doc file to ingenic,intc.yaml.

Some compatible strings now require a fallback, as the controller
generally works the same across the SoCs families.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the ingenic,cgu.txt doc file to ingenic,cgu.yaml.

The binding documentation has been updated as well. The node can have a
child node that corresponds to the USB PHY, which happens to be present
in the middle of the CGU registers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

This arch_timer property was added in commit c950ca8c
("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
but I omitted the device tree binding documentation. Now
`make dtbs_check` prints the following warning for all A64 boards:

timer: 'allwinner,erratum-unknown1' does not match any of the regexes: 'pinctrl-[0-9]+'

Resolve this by documenting the erratum property.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Rob Herring <robh@kernel.org>

A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: gpu@ff400000:
'#cooling-cells', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'#cooling-cells' and 'power-domains'
for Rockchip px30 gpu nodes,
so add them to 'arm,mali-bifrost.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-bifrost.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Sort the items in the compatible string list in increasing number of SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

arch/arm/boot/dts/uniphier-ref-daughter.dtsi has

  compatible = "microchip,24lc128", "atmel,24c128";

and 'make ARCH=arm dtbs_check' warns this:

  eeprom@50: compatible: ['microchip,24lc128', 'atmel,24c128'] is not valid under any of the given schemas (Possible causes of the failure)

Microchip 24LC128 is the device used on this board, and I see it in
https://www.microchip.com/wwwproducts/en/24LC128Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX7ULP watchdog binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX watchdog binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the MXS OCOTP binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX IIM binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX OCOTP binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX GPIO binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX8MM thermal binding to DT schema format using json-schema
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Renesas VMSA-Compatible IOMMU bindings documentation
to json-schema.

Note that original documentation doesn't mention renesas,ipmmu-vmsa
for R-Mobile APE6. But, R-Mobile APE6 is similar to the R-Car
Gen2. So, renesas,ipmmu-r8a73a4 belongs the renesas,ipmmu-vmsa
section.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document and section titles;
- Mark literal blocks as such;
- Add it to bindings/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document and section titles;
- Mark literal blocks as such;
- Add it to bindings/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

This file only requires a properly-formatted title to be
recognized as a ReST file.

As there will be more files under bindings/ that will be
included at the documentation body, add a new index.rst
file there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document and section titles;
- Adjust numerated list markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document title;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The devicetree.org doesn't host the Device_Tree_Usage page
anymore. So, fix the link to point to a new address.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

- Add a SPDX header;
- Adjust document title;
- Use footnoote markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

There are some device tree documentation under
Documentation/devicetree. Add a top index file for it and
add the already-existing ReST file on it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The overlay implementation details in the compiled (DTB) file are
now properly implemented by the dtc compiler and should no longer
be hard coded in the source file.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

The Calxeda system registers are a collection of MMIO register
controlling several more general aspects of the SoC.
Beside for some power management tasks this node is also somewhat
abused as the container for the clock nodes.

Add a binding in DT schema format using json-schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the generic IPMI controller bindings to DT schema format
using json-schema.

The device_type property is deprecated for most node per the DT spec,
but at least the Linux driver matches on it, so I keep it in.

The Linux driver parses for some additional and optional properties,
but there are no in-tree users. Let's allow extra properties to cover
any other users.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Calxeda DDR memory controller binding to DT schema format
using json-schema.
Although this technically covers the whole DRAM controller, the
intention to use it only for error reporting and mapping fault addresses
to DRAM chips.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the L2-ECC controller binding to DT schema format using
json-schema.
This is indented to be just used for error reporting.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Calxeda ComboPHY binding to DT schema format using
json-schema.
There is no driver in the Linux kernel matching the compatible
string, but the nodes are parsed by the SATA driver, which links to them
using its port-phys property.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>