Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb targets out of arch code. This makes the support
     more uniform and enables building all dtbs on c6x, microblaze, and
     powerpc.

   - Various DT binding updates for Renesas r8a7744 SoC

   - Vendor prefixes for Facebook, OLPC

   - Restructuring of some ARM binding docs moving some peripheral
     bindings out of board/SoC binding files

   - New "secure-chosen" binding for secure world settings on ARM

   - Dual licensing of 2 DT IRQ binding headers"

* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  ARM: dt: relicense two DT binding IRQ headers
  power: supply: twl4030-charger: fix OF sibling-node lookup
  NFC: nfcmrvl_uart: fix OF child-node lookup
  net: stmmac: dwmac-sun8i: fix OF child-node lookup
  net: bcmgenet: fix OF child-node lookup
  drm/msm: fix OF child-node lookup
  drm/mediatek: fix OF sibling-node lookup
  of: Add missing exports of node name compare functions
  dt-bindings: Add OLPC vendor prefix
  dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
  dt-bindings: thermal: samsung: Add SPDX license identifier
  dt-bindings: clock: samsung: Add SPDX license identifiers
  dt-bindings: timer: ostm: Add R7S9210 support
  dt-bindings: phy: rcar-gen2: Add r8a7744 support
  dt-bindings: can: rcar_can: Add r8a7744 support
  dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
  dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  Documentation: dt: Add binding for /secure-chosen/stdout-path
  dt-bindings: arm: zte: Move sysctrl bindings to their own doc
  ...

Pull thermal SoC updates from Eduardo Valentin:
 "Several new things coming up. Specifics:

   - Rework of tsens and hisi thermal drivers

   - OF-thermal now allows sharing multiple cooling devices on maps

   - Added support for r8a7744 and R8A77970 on rcar thermal driver

   - Added support for r8a774a1 on rcar_gen3 thermal driver

   - New thermal driver stm32

   - Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada,
     qcom-spmi, rcar, da9062/61"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits)
  thermal: da9062/61: Prevent hardware access during system suspend
  thermal: rcar_thermal: Prevent doing work after unbind
  thermal: rcar_thermal: Prevent hardware access during system suspend
  thermal: rcar_gen3_thermal: add R8A77980 support
  dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings
  thermal: add stm32 thermal driver
  dt-bindings: stm32-thermal: add binding documentation
  thermal: rcar_thermal: add R8A77970 support
  dt-bindings: thermal: rcar-thermal: document R8A77970 bindings
  thermal: rcar_thermal: fix duplicate IRQ request
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  thermal/drivers/hisi: Add the dual clusters sensors for hi3660
  thermal/drivers/hisi: Add more sensors channel
  thermal/drivers/hisi: Remove pointless irq field
  thermal/drivers/hisi: Use platform_get_irq_byname
  thermal/drivers/hisi: Replace macro name with relevant sensor location
  thermal/drivers/hisi: Add multiple sensors support
  thermal/drivers/hisi: Prepare to support multiple sensors
  thermal/drivers/hisi: Factor out the probe functions
  thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer
  ...

Pull more dma-mapping updates from Christoph Hellwig:

 - various swiotlb cleanups

 - do not dip into the ѕwiotlb pool for dma coherent allocations

 - add support for not cache coherent DMA to swiotlb

 - switch ARM64 to use the generic swiotlb_dma_ops

* tag 'dma-mapping-4.20-1' of git://git.infradead.org/users/hch/dma-mapping:
  arm64: use the generic swiotlb_dma_ops
  swiotlb: add support for non-coherent DMA
  swiotlb: don't dip into swiotlb pool for coherent allocations
  swiotlb: refactor swiotlb_map_page
  swiotlb: use swiotlb_map_page in swiotlb_map_sg_attrs
  swiotlb: merge swiotlb_unmap_page and unmap_single
  swiotlb: remove the overflow buffer
  swiotlb: do not panic on mapping failures
  swiotlb: mark is_swiotlb_buffer static
  swiotlb: remove a pointless comment

Pull IOMMU updates from Joerg Roedel:

 - Debugfs support for the Intel VT-d driver.

   When enabled, it now also exposes some of its internal data
   structures to user-space for debugging purposes.

 - ARM-SMMU driver now uses the generic deferred flushing and fast-path
   iova allocation code.

   This is expected to be a major performance improvement, as this
   allocation path scales a lot better.

 - Support for r8a7744 in the Renesas iommu driver

 - Couple of minor fixes and improvements all over the place

* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
  iommu/arm-smmu-v3: Remove unnecessary wrapper function
  iommu/arm-smmu-v3: Add SPDX header
  iommu/amd: Add default branch in amd_iommu_capable()
  dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
  iommu/amd: Move iommu_init_pci() to .init section
  iommu/arm-smmu: Support non-strict mode
  iommu/io-pgtable-arm-v7s: Add support for non-strict mode
  iommu/arm-smmu-v3: Add support for non-strict mode
  iommu/io-pgtable-arm: Add support for non-strict mode
  iommu: Add "iommu.strict" command line option
  iommu/dma: Add support for non-strict mode
  iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
  iommu/arm-smmu-v3: Implement flush_iotlb_all hook
  iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
  iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
  iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
  iommu/arm-smmu-v3: Fix a couple of minor comment typos
  iommu: Fix a typo
  iommu: Remove .domain_{get,set}_windows
  iommu: Tidy up window attributes
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc patches for 4.20-rc1.

  Loads of things here, we have new code in all of these driver
  subsystems:
   - fpga
   - stm
   - extcon
   - nvmem
   - eeprom
   - hyper-v
   - gsmi
   - coresight
   - thunderbolt
   - vmw_balloon
   - goldfish
   - soundwire
  along with lots of fixes and minor changes to other small drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (245 commits)
  Documentation/security-bugs: Clarify treatment of embargoed information
  lib: Fix ia64 bootloader linkage
  MAINTAINERS: Clarify UIO vs UIOVEC maintainer
  docs/uio: fix a grammar nitpick
  docs: fpga: document programming fpgas using regions
  fpga: add devm_fpga_region_create
  fpga: bridge: add devm_fpga_bridge_create
  fpga: mgr: add devm_fpga_mgr_create
  hv_balloon: Replace spin_is_locked() with lockdep
  sgi-xp: Replace spin_is_locked() with lockdep
  eeprom: New ee1004 driver for DDR4 memory
  eeprom: at25: remove unneeded 'at25_remove'
  w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).
  misc: mic: scif: remove set but not used variables 'src_dma_addr, dst_dma_addr'
  misc: mic: fix a DMA pool free failure
  platform: goldfish: pipe: Add a blank line to separate varibles and code
  platform: goldfish: pipe: Remove redundant casting
  platform: goldfish: pipe: Call misc_deregister if init fails
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state
  ...

Merge tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is a small number of driver core patches for 4.20-rc1.

  Not much happened here this merge window, only a very tiny number of
  patches that do:

   - add BUS_ATTR_WO() for use by drivers

   - component error path fixes

   - kernfs range check fix

   - other tiny error path fixes and const changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  devres: provide devm_kstrdup_const()
  mm: move is_kernel_rodata() to asm-generic/sections.h
  devres: constify p in devm_kfree()
  driver core: add BUS_ATTR_WO() macro
  kernfs: Fix range checks in kernfs_get_target_path
  component: fix loop condition to call unbind() if bind() fails
  drivers/base/devtmpfs.c: don't pretend path is const in delete_path
  kernfs: update comment about kernfs_path() return value

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver patches for 4.20-rc1

  Lots of USB changes in here, primarily in these areas:

   - typec updates and new drivers

   - new PHY drivers

   - dwc2 driver updates and additions (this old core keeps getting
     added to new devices.)

   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.

   - USB gadget additions for new features

   - USB gadget configfs updates

   - chipidea driver updates

   - other USB gadget updates

   - USB serial driver updates

   - renesas driver updates

   - xhci driver updates

   - other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
  usb: phy: ab8500: silence some uninitialized variable warnings
  usb: xhci: tegra: Add genpd support
  usb: xhci: tegra: Power-off power-domains on removal
  usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
  usbip: tools: fix atoi() on non-null terminated string
  USB: misc: appledisplay: fix backlight update_status return code
  phy: phy-pxa-usb: add a new driver
  usb: host: add DT bindings for faraday fotg2
  usb: host: ohci-at91: fix request of irq for optional gpio
  usb/early: remove set but not used variable 'remain_length'
  usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
  usb: typec: tcpm: Report back negotiated PPS voltage and current
  USB: core: remove set but not used variable 'udev'
  usb: core: fix memory leak on port_dev_path allocation
  USB: net2280: Remove ->disconnect() callback from net2280_pullup()
  usb: dwc2: disable power_down on rockchip devices
  usb: gadget: udc: renesas_usb3: add support for r8a77990
  dt-bindings: usb: renesas_usb3: add bindings for r8a77990
  usb: gadget: udc: renesas_usb3: Add r8a774a1 support
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  ...

Pull rdma updates from Jason Gunthorpe:
 "This has been a smaller cycle with many of the commits being smallish
  code fixes and improvements across the drivers.

   - Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and
     rxe

   - Memory window support in hns

   - mlx5 user API 'flow mutate/steering' allows accessing the full
     packet mangling and matching machinery from user space

   - Support inter-working with verbs API calls in the 'devx' mlx5 user
     API, and provide options to use devx with less privilege

   - Modernize the use of syfs and the device interface to use attribute
     groups and cdev properly for uverbs, and clean up some of the core
     code's device list management

   - More progress on net namespaces for RDMA devices

   - Consolidate driver BAR mmapping support into core code helpers and
     rework how RDMA holds poitners to mm_struct for get_user_pages
     cases

   - First pass to use 'dev_name' instead of ib_device->name

   - Device renaming for RDMA devices"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits)
  IB/mlx5: Add support for extended atomic operations
  RDMA/core: Fix comment for hw stats init for port == 0
  RDMA/core: Refactor ib_register_device() function
  RDMA/core: Fix unwinding flow in case of error to register device
  ib_srp: Remove WARN_ON in srp_terminate_io()
  IB/mlx5: Allow scatter to CQE without global signaled WRs
  IB/mlx5: Verify that driver supports user flags
  IB/mlx5: Support scatter to CQE for DC transport type
  RDMA/drivers: Use core provided API for registering device attributes
  RDMA/core: Allow existing drivers to set one sysfs group per device
  IB/rxe: Remove unnecessary enum values
  RDMA/umad: Use kernel API to allocate umad indexes
  RDMA/uverbs: Use kernel API to allocate uverbs indexes
  RDMA/core: Increase total number of RDMA ports across all devices
  IB/mlx4: Add port and TID to MAD debug print
  IB/mlx4: Enable debug print of SMPs
  RDMA/core: Rename ports_parent to ports_kobj
  RDMA/core: Do not expose unsupported counters
  IB/mlx4: Refer to the device kobject instead of ports_parent
  RDMA/nldev: Allow IB device rename through RDMA netlink
  ...

Files in include/dt-bindings/ may be useful to any OS that uses DT, when
building the OS binary itself, not just when building DTB files. Since
some OSs are not GPL, they need non-GPL headers. This change relicenses
two of the useful files so that they can be used under the MIT license
when desired. I wrote these files and NVIDIA legal has approved this
change. Geert also ack'd the change; he fixed some spelling issues in the
comments.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull sparc fix from David Miller:
 "Build regression fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix VDSO build with older binutils.

Merge tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This patch set contains a lot (at least, for me) of improvements to
  the RISC-V kernel port:

   - The removal of some cacheinfo values that were bogus.

   - On systems with F but without D the kernel will not show the F
     extension to userspace, as it isn't actually supported.

   - Support for futexes.

   - Removal of some unused code.

   - Cleanup of some menuconfig entries.

   - Support for systems without a floating-point unit, and for building
     kernels that will never use the floating-point unit.

   - More fixes to the RV32I port, which regressed again. It's really
     time to get this into a regression test somewhere so I stop
     breaking it. Thanks to Zong for resurrecting it again!

   - Various fixes that resulted from a year old review of our original
     patch set that I finally got around to.

   - Various improvements to SMP support, largely based around having
     switched to logical hart numbering, as well as some interrupt
     improvements. This one is in the same patch set as above, thanks to
     Atish for sheparding everything though as my patch set was a bit of
     a mess.

  I'm pretty sure this is our largest patch set since the original
  kernel contribution, and it's certainly the one with the most
  contributors. While I don't have anything else I know I'm going to
  submit for the merge window, I would be somewhat surprised if I didn't
  screw anything up.

  Thanks for the help, everyone!"

* tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
  RISC-V: Cosmetic menuconfig changes
  riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
  RISC-V: remove the unused return_to_handler export
  RISC-V: Add futex support.
  RISC-V: Add FP register ptrace support for gdb.
  RISC-V: Mask out the F extension on systems without D
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Show IPI stats
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Use Linux logical CPU number instead of hartid
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Use mmgrab()
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  ...

Pull KVM updates from Radim Krčmář:
 "ARM:
   - Improved guest IPA space support (32 to 52 bits)

   - RAS event delivery for 32bit

   - PMU fixes

   - Guest entry hardening

   - Various cleanups

   - Port of dirty_log_test selftest

  PPC:
   - Nested HV KVM support for radix guests on POWER9. The performance
     is much better than with PR KVM. Migration and arbitrary level of
     nesting is supported.

   - Disable nested HV-KVM on early POWER9 chips that need a particular
     hardware bug workaround

   - One VM per core mode to prevent potential data leaks

   - PCI pass-through optimization

   - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base

  s390:
   - Initial version of AP crypto virtualization via vfio-mdev

   - Improvement for vfio-ap

   - Set the host program identifier

   - Optimize page table locking

  x86:
   - Enable nested virtualization by default

   - Implement Hyper-V IPI hypercalls

   - Improve #PF and #DB handling

   - Allow guests to use Enlightened VMCS

   - Add migration selftests for VMCS and Enlightened VMCS

   - Allow coalesced PIO accesses

   - Add an option to perform nested VMCS host state consistency check
     through hardware

   - Automatic tuning of lapic_timer_advance_ns

   - Many fixes, minor improvements, and cleanups"

* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
  Revert "kvm: x86: optimize dr6 restore"
  KVM: PPC: Optimize clearing TCEs for sparse tables
  x86/kvm/nVMX: tweak shadow fields
  selftests/kvm: add missing executables to .gitignore
  KVM: arm64: Safety check PSTATE when entering guest and handle IL
  KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
  arm/arm64: KVM: Enable 32 bits kvm vcpu events support
  arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
  KVM: arm64: Fix caching of host MDCR_EL2 value
  KVM: VMX: enable nested virtualization by default
  KVM/x86: Use 32bit xor to clear registers in svm.c
  kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
  kvm: vmx: Defer setting of DR6 until #DB delivery
  kvm: x86: Defer setting of CR2 until #PF delivery
  kvm: x86: Add payload operands to kvm_multiple_exception
  kvm: x86: Add exception payload fields to kvm_vcpu_events
  kvm: x86: Add has_payload and payload to kvm_queued_exception
  KVM: Documentation: Fix omission in struct kvm_vcpu_events
  KVM: selftests: add Enlightened VMCS test
  ...

Pull cgroup updates from Tejun Heo:
 "All trivial changes - simplification, typo fix and adding
  cond_resched() in a netclassid update loop"

* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup, netclassid: add a preemption point to write_classid
  rdmacg: fix a typo in rdmacg documentation
  cgroup: Simplify cgroup_ancestor

Pull printk updates from Petr Mladek:

 - Fix two more locations where printf formatting leaked pointers

 - Better log_buf_len parameter handling

 - Add prefix to messages from printk code

 - Do not miss messages on other consoles when the log is replayed on a
   new one

 - Reduce race between console registration and panic() when the log
   might get replayed on all consoles

 - Some cont buffer code clean up

 - Call console only when there is something to do (log vs cont buffer)

* tag 'printk-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Hash printed address for netdev bits fallback
  lib/vsprintf: Hash legacy clock addresses
  lib/vsprintf: Prepare for more general use of ptr_to_id()
  lib/vsprintf: Make ptr argument conts in ptr_to_id()
  printk: fix integer overflow in setup_log_buf()
  printk: do not preliminary split up cont buffer
  printk: lock/unlock console only for new logbuf entries
  printk: keep kernel cont support always enabled
  printk: Give error on attempt to set log buffer length to over 2G
  printk: Add KBUILD_MODNAME and remove a redundant print prefix
  printk: Correct wrong casting
  printk: Fix panic caused by passing log_buf_len to command line
  printk: CON_PRINTBUFFER console registration is a bit racy
  printk: Do not miss new messages when replaying the log

Pull crypto updates from Herbert Xu:
 "API:
   - Remove VLA usage
   - Add cryptostat user-space interface
   - Add notifier for new crypto algorithms

  Algorithms:
   - Add OFB mode
   - Remove speck

  Drivers:
   - Remove x86/sha*-mb as they are buggy
   - Remove pcbc(aes) from x86/aesni
   - Improve performance of arm/ghash-ce by up to 85%
   - Implement CTS-CBC in arm64/aes-blk, faster by up to 50%
   - Remove PMULL based arm64/crc32 driver
   - Use PMULL in arm64/crct10dif
   - Add aes-ctr support in s5p-sss
   - Add caam/qi2 driver

  Others:
   - Pick better transform if one becomes available in crc-t10dif"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: chelsio - Update ntx queue received from cxgb4
  crypto: ccree - avoid implicit enum conversion
  crypto: caam - add SPDX license identifier to all files
  crypto: caam/qi - simplify CGR allocation, freeing
  crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
  crypto: arm64/aes-blk - ensure XTS mask is always loaded
  crypto: testmgr - fix sizeof() on COMP_BUF_SIZE
  crypto: chtls - remove set but not used variable 'csk'
  crypto: axis - fix platform_no_drv_owner.cocci warnings
  crypto: x86/aes-ni - fix build error following fpu template removal
  crypto: arm64/aes - fix handling sub-block CTS-CBC inputs
  crypto: caam/qi2 - avoid double export
  crypto: mxs-dcp - Fix AES issues
  crypto: mxs-dcp - Fix SHA null hashes and output length
  crypto: mxs-dcp - Implement sha import/export
  crypto: aegis/generic - fix for big endian systems
  crypto: morus/generic - fix for big endian systems
  crypto: lrw - fix rebase error after out of bounds fix
  crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.
  crypto: cavium/nitrox - NITROX command queue changes.
  ...

Pull LoadPin updates from James Morris:
 "From Kees: This is a small reporting improvement and the param change
  needed for the ordering series (but since the loadpin change is
  desired and separable, I'm putting it here)"

* 'next-loadpin' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LoadPin: Rename boot param "enabled" to "enforce"
  LoadPin: Report friendly block device name

Pull smack updates from James Morris:
 "From Casey: three patches for Smack for 4.20. Two clean up warnings
  and one is a rarely encountered ptrace capability check"

* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Smack: Mark expected switch fall-through
  Smack: ptrace capability use fixes
  Smack: remove set but not used variable 'root_inode'

Pull TPM updates from James Morris:
 "From Jarkko: The only new feature is non-blocking operation for
  /dev/tpm0"

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: Restore functionality to xen vtpm driver.
  tpm: add support for nonblocking operation
  tpm: add ptr to the tpm_space struct to file_priv
  tpm: Make SECURITYFS a weak dependency
  tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated
  tpm: fix response size validation in tpm_get_random()

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity updates from James Morris:
 "From Mimi: This contains a couple of bug fixes, including one for a
  recent problem with calculating file hashes on overlayfs, and some
  code cleanup"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MAINTAINERS: add Jarkko as maintainer for trusted keys
  ima: open a new file instance if no read permissions
  ima: fix showing large 'violations' or 'runtime_measurements_count'
  security/integrity: remove unnecessary 'init_keyring' variable
  security/integrity: constify some read-only data
  vfs: require i_size <= SIZE_MAX in kernel_read_file()

Pull more ->lookup() cleanups from Al Viro:
 "Some ->lookup() instances are still overcomplicating the life
  for themselves, open-coding the stuff that would be handled by
  d_splice_alias() just fine.

  Simplify a couple of such cases caught this cycle and document
  d_splice_alias() intended use"

* 'work.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Document d_splice_alias() calling conventions for ->lookup() users.
  simplify btrfs_lookup()
  clean erofs_lookup()

Pull alpha syscall glue updates from Al Viro:
 "Two old patches making alpha syscall glue a bit less mysterious"

* 'work.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: unify the glue for sigreturn-like syscalls
  alpha: use alpha_ni_syscall only for syscall zero

Pull compat_ioctl fixes from Al Viro:
 "A bunch of compat_ioctl fixes, mostly in bluetooth.

  Hopefully, most of fs/compat_ioctl.c will get killed off over the next
  few cycles; between this, tty series already merged and Arnd's work
  this cycle ought to take a good chunk out of the damn thing..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  hidp: fix compat_ioctl
  hidp: constify hidp_connection_add()
  cmtp: fix compat_ioctl
  bnep: fix compat_ioctl
  compat_ioctl: trim the pointless includes

Pull irq updates from Thomas Gleixner:
 "The interrupt brigade came up with the following updates:

   - Driver for the Marvell System Error Interrupt machinery

   - Overhaul of the GIC-V3 ITS driver

   - Small updates and fixes all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  genirq: Fix race on spurious interrupt detection
  softirq: Fix typo in __do_softirq() comments
  genirq: Fix grammar s/an /a /
  irqchip/gic: Unify GIC priority definitions
  irqchip/gic-v3: Remove acknowledge loop
  dt-bindings/interrupt-controller: Add documentation for Marvell SEI controller
  dt-bindings/interrupt-controller: Update Marvell ICU bindings
  irqchip/irq-mvebu-icu: Add support for System Error Interrupts (SEI)
  arm64: marvell: Enable SEI driver
  irqchip/irq-mvebu-sei: Add new driver for Marvell SEI
  irqchip/irq-mvebu-icu: Support ICU subnodes
  irqchip/irq-mvebu-icu: Disociate ICU and NSR
  irqchip/irq-mvebu-icu: Clarify the reset operation of configured interrupts
  irqchip/irq-mvebu-icu: Fix wrong private data retrieval
  dt-bindings/interrupt-controller: Fix Marvell ICU length in the example
  genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
  dt-bindings: irqchip: renesas-irqc: Document r8a7744 support
  dt-bindings: irqchip: renesas-irqc: Document R-Car E3 support
  irqchip/pdc: Setup all edge interrupts as rising edge at GIC
  irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
  ...

Pull timekeeping updates from Thomas Gleixner:
 "The timers and timekeeping departement provides:

   - Another large y2038 update with further preparations for providing
     the y2038 safe timespecs closer to the syscalls.

   - An overhaul of the SHCMT clocksource driver

   - SPDX license identifier updates

   - Small cleanups and fixes all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  tick/sched : Remove redundant cpu_online() check
  clocksource/drivers/dw_apb: Add reset control
  clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
  clocksource/drivers: Unify the names to timer-* format
  clocksource/drivers/sh_cmt: Add R-Car gen3 support
  dt-bindings: timer: renesas: cmt: document R-Car gen3 support
  clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
  clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
  clocksource/drivers/sh_cmt: Fixup for 64-bit machines
  clocksource/drivers/sh_tmu: Convert to SPDX identifiers
  clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
  clocksource/drivers/sh_cmt: Convert to SPDX identifiers
  clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
  clocksource: Convert to using %pOFn instead of device_node.name
  tick/broadcast: Remove redundant check
  RISC-V: Request newstat syscalls
  y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
  y2038: socket: Change recvmmsg to use __kernel_timespec
  y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
  y2038: utimes: Rework #ifdef guards for compat syscalls
  ...

The workqueue used for monitoring the hardware may run while the device
is already suspended.  Fix this by using the freezable system workqueue
instead, cfr. commit 51e20d0e ("thermal: Prevent polling from
happening during system suspend").

Fixes: 608567aa ("thermal: da9062/61: Thermal junction temperature monitoring driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

When testing bind/unbind on r8a7791/koelsch:

    WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
    ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10

This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.

Fixes: e0a5172e ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

On r8a7791/koelsch, sometimes the following message is printed during
system suspend:

    rcar_thermal e61f0000.thermal: thermal sensor was broken

This happens if the workqueue runs while the device is already
suspended.  Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e ("thermal: Prevent polling from happening
during system suspend").

Fixes: e0a5172e ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add the R-Car V3H (R8A77980) SoC support to the R-Car gen3 thermal driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Document the R-Car V3H (R8A77980) SoC in the Renesas R-Car gen3 thermal
bindings.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add support for DTS thermal sensor that can be
found on some STM32 platforms.

This driver is based on OF and works in interrupt
mode.

It offers two temperature trip points:
passive and critical. The first is intended for
passive cooling notification while the second is
used for over-temperature reset.
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add thermal binding documentation for STM32 DTS sensor
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add the R-Car V3M (R8A77970) SoC support to the R-Car gen2 thermal driver.
The hardware is the same as in the R-Car D3 (R8A77995) plus the CIVM status
register (we don't use).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Document  the R-Car V3M (R8A77970) SoC in the Renesas R-Car gen2 thermal
bindings. The hardware is the same as  in the R-Car D3 (R8A77995) plus an
extra status register.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

The driver on R8A77995 requests the same IRQ twice since
platform_get_resource() is always called for the 1st IRQ resource.

Fixes: 1969d9dc ("thermal: rcar_thermal: add r8a77995 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Older versions of bintutils do not allow symbol math across different
segments on sparc:

====================
Assembler messages:
99: Error: operation combines symbols in different segments
====================

This is controlled by whether or not DIFF_EXPR_OK is defined in
gas/config/tc-*.h and for sparc this was not the case until mid-2017.

So we have to patch between %stick and %tick another way.

Do what powerpc does and emit two versions of the relevant functions,
one using %tick and one using %stick, and patch the symbols in the
dynamic symbol table.

Fixes: 2f6c9bf3 ("sparc: Improve VDSO instruction patching.")
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sound updates from Takashi Iwai:
 "There have been little changes in ALSA core stuff, but ASoC core still
  kept rolling for the continued restructuring. The rest are lots of
  small driver-specific changes and some minor API updates. Here are
  highlights:

  General:
  - Appropriate fall-through annotations everywhere
  - Some code cleanup in memalloc code, handling non-cacahed pages more
    commonly in the helper
  - Deployment of SNDRV_PCM_INFO_SYNC_APPLPTR flag consistently

  Drivers:
  - More HD-audio CA0132 codec improvement for supporting other Creative
    boards
  - Plumbing legacy HD-audio codecs as ASoC BE on Intel SST; this will
    give move support of existing HD-audio devices with DSP
  - A few device-specific HD-audio quirks as usual
  - New quirk for RME CC devices and correction for B&W PX for USB-audio
  - FireWire: code refactoring including devres usages

  ASoC Core:
  - Continued componentization works; it's almost done!
  - A bunch of new for_each_foo macros
  - Cleanups and fixes in DAPM code

  ASoC Drivers:
  - MCLK support for several different devices, including CS42L51, STM32
    SAI, and MAX98373
  - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
    MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
    TI PCM3060"

* tag 'sound-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
  ASoC: stm32: sai: fix master clock naming
  ASoC: stm32: add clock dependency for sai
  ALSA: hda/ca0132 - Actually fix microphone issue
  ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks
  ASoC: wm2000: Remove wm2000_read helper function
  ASoC: cs42l51: fix mclk support
  ASoC: wm_adsp: Log addresses as 8 digits in wm_adsp_buffer_populate
  ASoC: wm_adsp: Rename memory fields in wm_adsp_buffer
  ASoC: cs42l51: add mclk support
  ASoC: stm32: sai: set sai as mclk clock provider
  ASoC: dt-bindings: add mclk support to cs42l51
  ASoC: dt-bindings: add mclk provider support to stm32 sai
  ASoC: soc-core: fix trivial checkpatch issues
  ASoC: dapm: Add support for hw_free on CODEC to CODEC links
  ASoC: Intel: kbl_da7219_max98927: minor white space clean up
  ALSA: i2c/cs8427: Fix int to char conversion
  ALSA: doc: Brush up the old writing-an-alsa-driver
  ASoC: rsnd: tidyup SSICR::SWSP for TDM
  ASoC: rsnd: enable TDM settings for SSI parent
  ASoC: pcm3168a: add hw constraint for capture channel
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
  qla2xxx, lpfc, libsas, hisi_sas.

  In addition there's a set of mostly small updates to the target
  subsystem a set of conversions to the generic DMA API, which do have
  some potential for issues in the older drivers but we'll handle those
  as case by case fixes.

  A new myrs driver for the DAC960/mylex raid controllers to replace the
  block based DAC960 which is also being removed by Jens in this merge
  window.

  Plus the usual slew of trivial changes"

[ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even
  wonder. There's also a "myrb" driver, where the 'b' stands for
  'block'. Truly, somebody has got mad naming skillz. - Linus ]

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits)
  scsi: myrs: Fix the processor absent message in processor_show()
  scsi: myrs: Fix a logical vs bitwise bug
  scsi: hisi_sas: Fix NULL pointer dereference
  scsi: myrs: fix build failure on 32 bit
  scsi: fnic: replace gross legacy tag hack with blk-mq hack
  scsi: mesh: switch to generic DMA API
  scsi: ips: switch to generic DMA API
  scsi: smartpqi: fully convert to the generic DMA API
  scsi: vmw_pscsi: switch to generic DMA API
  scsi: snic: switch to generic DMA API
  scsi: qla4xxx: fully convert to the generic DMA API
  scsi: qla2xxx: fully convert to the generic DMA API
  scsi: qla1280: switch to generic DMA API
  scsi: qedi: fully convert to the generic DMA API
  scsi: qedf: fully convert to the generic DMA API
  scsi: pm8001: switch to generic DMA API
  scsi: nsp32: switch to generic DMA API
  scsi: mvsas: fully convert to the generic DMA API
  scsi: mvumi: switch to generic DMA API
  scsi: mpt3sas: switch to generic DMA API
  ...

Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...

Pull dmaengine updates from Vinod Koul:

 - Support for ColdFire mcf5441x edma controller

 - Support for link list mode in sprd dma

 - More users of managed dmaenginem_async_device_register API

 - Cyclic mode support in owl dma driver

 - DT updates for renesas drivers, dma-jz4780 updates and support for
   JZ4770, JZ4740 and JZ4725B controllers

 - Removal of deprecated dma_slave_config direction in dmaengine
   drivers, few more users will be removed in next cycle and eventually
   removed.

 - Minor updates to idma64, ioat, pxa, ppc drivers

* tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (66 commits)
  dmaengine: ppc4xx: fix off-by-one build failure
  dmaengine: owl: Fix warnings generated during build
  dmaengine: fsl-edma: remove dma_slave_config direction usage
  dmaengine: rcar-dmac: set scatter/gather max segment size
  dmaengine: mmp_tdma: remove dma_slave_config direction usage
  dmaengine: ep93xx_dma: remove dma_slave_config direction usage
  dmaengine: k3dma: remove dma_slave_config direction usage
  dmaengine: k3dma: dont use direction for memcpy
  dmaengine: imx-dma: remove dma_slave_config direction usage
  dmaengine: idma: remove dma_slave_config direction usage
  dmaengine: hsu: remove dma_slave_config direction usage
  dmaengine: dw: remove dma_slave_config direction usage
  dmaengine: jz4740: remove dma_slave_config direction usage
  dmaengine: coh901318: remove dma_slave_config direction usage
  dmaengine: bcm2835: remove dma_slave_config direction usage
  dmaengine: at_hdmac: remove dma_slave_config direction usage
  dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  dmaengine: ioat: fix prototype of ioat_enumerate_channels
  dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
  dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
  ...

Pull EDAC updates from Borislav Petkov:
 "The EDAC tree was busier than usual this cycle as the shortlog below
  shows.

  Also, this pull request is carrying an ACPI DSM driver which is used
  to ask the platform to supply the DIMM location of a reported hardware
  error and thus simplify all the EDAC logic when trying to map the
  error address to the respective DIMM.

  Core EDAC updates:

   - amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin)
     Hygon Dhyana support (Pu Wen)

   - sb_edac: New maintainer + fixes (Tony Luck) Error reporting
     improvements and fixes (Qiuxu Zhuo)

   - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM
     error accounting (Fan Wu)

   - altera_edac: Stratix10 support and refactoring (Thor Thayer)

  Out of tree addition:

   - acpi_adxl: Address Translation interface using an ACPI DSM (Tony
     Luck)

   - the usual amount of other misc fixes and cleanups all over"

* tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
  ACPI/ADXL: Add address translation interface using an ACPI DSM
  EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()
  EDAC, skx_edac: Fix logical channel intermediate decoding
  EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting
  EDAC, altera: Work around int-to-pointer-cast warnings
  EDAC, amd64: Add Hygon Dhyana support
  EDAC: Raise the maximum number of memory controllers
  arm64: dts: stratix10: Add peripheral EDAC nodes
  EDAC, altera: Add Stratix10 peripheral support
  EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine
  arm64: dts: stratix10: Add SDRAM node
  EDAC, altera: Combine Stratix10 and Arria10 probe functions
  arm64: dts: stratix10: Additions to EDAC System Manager
  EDAC, i7core: Remove set but not used variable pvt
  EDAC, ghes: Use CPER module handles to locate DIMMs
  EDAC: Correct DIMM capacity unit symbol
  EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions
  EDAC, sb_edac: Fix reporting for patrol scrubber errors
  EDAC, sb_edac: Return early on ADDRV bit and address type test
  MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c
  ...