- 02 Apr, 2006 40 commits
-
-
Jens Axboe authored
This lets userspace indicate whether more data will be coming in a subsequent splice call. Signed-off-by:Jens Axboe <axboe@suse.de>
-
Jens Axboe authored
Hopefully this will make Andrew a little more happy. Signed-off-by: -
Jens Axboe authored
By cleaning up the writeback logic (killing write_one_page() and the manual set_page_dirty()), we can get rid of ->stolen inside the pipe_buffer and just keep it local in pipe_to_file(). This also adds dirty page balancing logic and O_SYNC handling. Signed-off-by: -
Jens Axboe authored
Clear the entire range, and don't increment pidx or we keep filling the same position again and again. Thanks to KAMEZAWA Hiroyuki. Signed-off-by: -
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (49 commits) V4L/DVB (3667b): cpia2: fix function prototype V4L/DVB (3702): Make msp3400 routing defines more consistent V4L/DVB (3700): Remove obsolete commands from tvp5150.c V4L/DVB (3697): More msp3400 and bttv fixes V4L/DVB (3696): Previous change for cx2341X boards broke the remote support V4L/DVB (3693): Fix msp3400c and bttv stereo/mono/bilingual detection/handling V4L/DVB (3692): Keep experimental SLICED_VBI defines under an #if 0 V4L/DVB (3689): Kconfig: fix VP-3054 Secondary I2C Bus build configuration menu dependencies V4L/DVB (3673): Fix budget-av CAM reset V4L/DVB (3672): Fix memory leak in dvr open V4L/DVB (3671): New module parameter 'tv_standard' (dvb-ttpci driver) V4L/DVB (3670): Fix typo in comment V4L/DVB (3669): Configurable dma buffer size for saa7146-based budget dvb cards V4L/DVB (3653h): Move usb v4l docs into Documentation/video4linux V4L/DVB (3667a): Fix SAP + stereo mode at msp3400 V4L/DVB (3666): Remove trailing newlines V4L/DVB (3665): Add new NEC uPD64031A and uPD64083 i2c drivers V4L/DVB (3663): Fix msp3400c wait time and better audio mode fallbacks V4L/DVB (3662): Don't set msp3400c-non-existent register V4L/DVB (3661): Add wm8739 stereo audio ADC i2c driver ...
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: kbuild infrastructure IB/ipath: infiniband verbs support IB/ipath: misc infiniband code, part 2 IB/ipath: misc infiniband code, part 1 IB/ipath: infiniband RC protocol support IB/ipath: infiniband UC and UD protocol support IB/ipath: infiniband header files IB/ipath: layering interfaces used by higher-level driver code IB/ipath: support for userspace apps using core driver IB/ipath: sysfs and ipathfs support for core driver IB/ipath: misc driver support code IB/ipath: chip initialisation code, and diag support IB/ipath: support for PCI Express devices IB/ipath: support for HyperTransport devices IB/ipath: core driver header files IB/ipath: core device driver
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits) [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error) [PATCH] pcmcia: fix pcmcia_device_remove oops [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45 [PATCH] pcmcia: pseudo device handling update [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present [PATCH] pcmcia: use bitfield instead of p_state and state [PATCH] pcmcia: remove unused p_dev->state flags [PATCH] pcmcia: make pcmcia_release_{io,irq} static [PATCH] pcmcia: add return value to _config() functions [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device [PATCH] pcmcia: rename pcmcia_device.state [PATCH] pcmcia: remove unneeded Vcc pseudo setting [PATCH] pcmcia: remove export of pcmcia_release_configuration [PATCH] pcmcia: default suspend and resume handling [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq [PATCH] pcmcia: add pcmcia_disable_device [PATCH] serial_cs: add Merlin U630 IDs [PATCH] pcmcia: AT91RM9200 Compact Flash driver [PATCH] pcmcia: socket.functions starts with 1 ... -
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: add support for Braille devices Input: synaptics - limit rate to 40pps on Toshiba Protege M300 Input: gamecon - add SNES mouse support Input: make modalias code respect allowed buffer size Input: convert /proc handling to seq_file Input: limit attributes' output to PAGE_SIZE Input: gameport - fix memory leak Input: serio - fix memory leak Input: zaurus keyboard driver updates Input: i8042 - fix logic around pnp_register_driver() Input: ns558 - fix logic around pnp_register_driver() Input: pcspkr - separate device and driver registration Input: atkbd - allow disabling on X86_PC (if EMBEDDED) Input: atkbd - disable softrepeat for dumb keyboards Input: atkbd - fix complaints about 'releasing unknown key 0x7f' Input: HID - fix duplicate key mapping for Logitech UltraX remote Input: use kzalloc() throughout the code Input: fix input_free_device() implementation Input: initialize serio and gameport at subsystem level Input: uinput - semaphore to mutex conversion ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: iSeries needs slb_initialize to be called powerpc: hook up the splice syscall [PATCH] powerpc/cell: compile fixes [PATCH] powerpc: trivial spelling fixes in fault.c [PATCH] powerpc/pseries: EEH Cleanup [PATCH] powerpc/pseries: misc lparcfg fixes [PATCH] powerpc/pseries: fix device name printing, again. [PATCH] powerpc: Extends HCALL interface for InfiniBand usage [PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS [PATCH] powerpc/pseries: print message if EEH recovery fails [PATCH] powerpc/pseries: mutex lock to serialize EEH event processing powerpc: converted embedded platforms to use new define_machine support powerpc: merge machine_check_exception between ppc32 & ppc64
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Wire up sys_sync_file_range() into syscall tables. [SPARC]: Wire up sys_splice() into the syscall tables. [SPARC64]: Update defconfig. [SPARC64]: Align address in huge_pte_alloc(). [SPARC64]: Document the instruction checks we do in do_sparc64_fault(). [SPARC64]: Make tsb_sync() mm comparison more precise.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Fully fix the memory leaks in sys_accept(). [NETFILTER]: iptables 32bit compat layer [NETFILTER]: {ip,nf}_conntrack_netlink: fix expectation notifier unregistration [NETFILTER]: fix ifdef for connmark support in nf_conntrack_netlink [NETFILTER]: x_tables: unify IPv4/IPv6 multiport match [NETFILTER]: x_tables: unify IPv4/IPv6 esp match [NET]: Fix dentry leak in sys_accept(). [IPSEC]: Kill unused decap state structure [IPSEC]: Kill unused decap state argument [NET]: com90xx kmalloc fix [TG3]: Update driver version and reldate. [TG3]: Revert "Speed up SRAM access" -
Linus Torvalds authored
It doesn't make the splice itself necessarily nonblocking (because the actual file descriptors that are spliced from/to may block unless they have the O_NONBLOCK flag set), but it makes the splice pipe operations nonblocking. Signed-off-by:Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
(We'd only added the number, which meant that actually trying to use splice just went off into la-la-land) Signed-off-by: -
Randy Dunlap authored
Fix address space warning (from sparse): drivers/media/video/cpia2/cpia2_core.c:2355:6: error: symbol 'cpia2_read' redeclared with different type (originally declared at drivers/media/video/cpia2/cpia2.h:458) - incompatible argument 2 (different address spaces) Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Renamed various msp3400 routing defines to be more consistent and less confusing. Esp. the MSP_DSP_OUT defines were confusing since it is really a DSP input. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
- Remove old DECODER_ commands from tvp5150.c, replacing them with newer ones if appropriate. - Small VIDIOC_G_TUNER fixes in msp3400 and tuner. - Fix VIDIOC_S_TUNER support in em28xx. Signed-off-by:
-
Hans Verkuil authored
- remove obsolete VIDIOC_S_INPUT i2c call in bttv - translate VIDIOCSFREQ to VIDIOC_S_FREQUENCY in i2c call - improve muting during carrier scan in msp3400 - don't start scan unless really needed. - no longer reset chip for msp3400c/d. - remove v4l2 check in tuner-core (radio stops after using the TV) - add missing VIDIOC_INT_ strings in v4l2-common.c Signed-off-by:
-
Hans Verkuil authored
Partially revert previous change to fix IR support. Signed-off-by:
-
Hans Verkuil authored
- msp3400c did not detect the second carrier, thus being always mono. - properly mute the msp3400c while detecting the carrier. - fix checks on the presence of scart2/3 inputs and scart 2 output. - implement proper audio mode fallbacks for msp3400c/d, identical to the way msp3400g works. - MODE_STEREO no longer produces dual languages when set for a bilingual transmission, instead it falls back to LANG1. Use LANG1_LANG2 to hear both languages of a bilingual transmission. This is much more intuitive for the user and is in accordance with the preferred usage in the v4l2 specification. - bttv tried to implement v4l2 calls with v4l1 calls to the i2c devices, completely mangling the audmode/rxsubchans handling. v4l2 calls now do v4l2 calls to the i2c devices. - fixed broken i2c_vidiocschan in bttv. - add start/end lines to LOG_STATUS. Signed-off-by:
-
Hans Verkuil authored
The sliced VBI defines added in videodev2.h are removed since requires more discussion. Signed-off-by:
-
Michael Krufky authored
This patch fixes a dependency problem that affected the indentation order within the individual frontend selection support menus for cx88-dvb. - created a boolean dependency link for VIDEO_CX88_VP3054, so that it's tristate value will be the same as that of VIDEO_CX88_DVB. - VIDEO_CX88_VP3054 is automatically selected by VIDEO_CX88_DVB_ALL_FRONTENDS, but is otherwise selected by VIDEO_CX88_DVB_VP3054, offered as an option under VIDEO_CX88_DVB_MT352 Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Andrew de Quincey authored
Unfortunately on the budget-av board, the CAM reset line is tied to the frontend reset line, so resetting the CAM also zaps the frontend. This breaks the tda1004x at least, and causes it to fail to tune until the budget-av module is reloaded. This patch adds an exported function to dvb_frontend that allows a card to forcibly reinitialise a frontend. The budget-av now does this on CAM reset, which corrects this problem. since they do not tie the CAM reset line to the frontend reset line. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Trent Piepho authored
The dvr device could be opened multiple times simultaneously in O_RDONLY mode. Each open after the first would allocate a new dvr buffer (1880 KB) and leak the old buffer. The first close would de-allocate the dvr buffer and cause all other open dvrs to stop working. This patch allows only a single O_RDONLY open of the drv device, as per the API specification. Multiple O_WRONLY opens are still allowed and don't appear to cause any problems. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
C.Y.M authored
This attached patch was originally proposed by Anssi Hannula to the dvb-kernel user to choose the default broadcast mode when using the ttpci driver. NTSC users need to only add the following line to modprobe.d: options dvb-ttpci tv_standard=1 PAL users will not need to change anything, for this will be the default. Signed-off-by:
C.Y.M <syphir@syphir.sytes.net> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Adrian Bunk authored
This patch fixes a typo in a comment. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Ingo Schneider authored
- Issue a warning when more than 80% of the DMA buffer is being used (probably due to bad IRQ latency). Warnings are rate-limited. - Introduce a new parameter 'bufsize' (in KByte) which increases the default DMA buffer of 188 KByte up to 1410 KByte (Activy: 564 KByte). Signed-off-by:
Ingo Schneider <mail@ingo-schneider.de> Signed-off-by:
-
Michael Krufky authored
- Move documentation for usb v4l devices from Documentation/usb to Documentation/video4linux. - Removed trailing whitespace. - Update Kconfig help text links to reflect the new file locations. Signed-off-by:
-
Mauro Carvalho Chehab authored
It should be V4L2_TUNER_MODE_LANG1_LANG2. What the code does is check if we are NTSC and a SAP channel is available. If so, then the msp3400 should switch to standard 0x21 if the user wants to hear the SAP channel, which is for audio modes LANG2 (aka SAP) and LANG1_LANG2 (bilingual). In the msp3400 driver STEREO is abused for bilingual in PAL. Bilingual never worked with NTSC in the past and I decided that I'd better not use the bad PAL example. Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- Add support for the uPD64031A NEC Electronics Ghost Reduction i2c device - Add support for the uPD6408x NEC Electronics 3-Dimensional Y/C separation i2c device. Signed-off-by:
Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by:
Takeru Komoriya <komoriya@paken.org> Signed-off-by:
-
Hans Verkuil authored
- The wait time until the first time the audio mode was detected was 1+5=6 seconds instead of just 1 second (wrong statement order). msp3400c specific bug. - Implemented audio mode fallback for msp3400c/d just like the msp3400g does automatically. E.g. fallback to stereo if no second language exists, etc. Signed-off-by:
-
Hans Verkuil authored
The driver tried to set a register that is not present on msp3400c devices. Add the missing test. Signed-off-by:
-
Hans Verkuil authored
Add support for the Wolfson Microelectronics WM8739 stereo A/D converter from the ivtv driver. Many thanks to Takahiro Adachi for writing the original driver. Signed-off-by:
-
Trent Piepho authored
- Fixed PCI ID typo in VIDEO_CX88_ALSA help text Signed-off-by:
-
Trent Piepho authored
- Added firmware download comments to or51211 and or51132 Kconfig help text. Signed-off-by:
-
Patrick Boettcher authored
There seems to be a new version of the USB DVB-T stick from WideView with a new demod-revision inside and thus a new firwmare. This patch enables support for that. Thanks to Mikel Martin for early testing. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
