- 09 Jan, 2011 26 commits
-
-
Chris Ball authored
Signed-off-by: Chris Ball <cjb@laptop.org> Tested-by: Chris Ball <cjb@laptop.org> Acked-by: Olof Johansson <olof@lixom.net>
-
Chris Ball authored
Signed-off-by: Chris Ball <cjb@laptop.org>
-
Andy Ross authored
Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Takashi Iwai authored
With the bus-width test patch, mmc_set_bus_width*() isn't called properly when the driver doesn't set MMC_CAP_BUS_WIDTH and no DDR mode. This patch fixes the regression by moving the call up before the cap test. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Will Newton authored
This adds the mmc host driver for the Synopsys DesignWare mmc host controller, found in a number of embedded SoC designs. Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Olof Johansson authored
SDHCI driver for Tegra. This driver plugs in as a new variant of sdhci-pltfm, using the platform data structure passed in to specify the GPIOs to use for card detect, write protect and card power enablement. Original driver (of which only the header file is left): Signed-off-by: Yvonne Yip <y@palm.com> The rest, which has been rewritten by now: Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Olof Johansson authored
Some controllers misparse segment length 0 as being 0, not 65536. Add a quirk to deal with it. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Linus Walleij authored
Since we make sure the clock is enabled in the mmc_host_clk_exit() function we should expect a reference counter of 1, not 0. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Jeongbae Seo authored
This patch supports controllers with no internal clock divider in SDHCI, such as the s5pc210 board. The external clock divider can be used to make a proper clock because SDHCI doesn't support internal clock divider by itself. If external clock divider type is selected, some functions related to clock control will be overrided by other functions. The current clock control index is added to let you know which clock bus is used for SDHCI when overriding functions. Checking functions are added into sdhci_s3c_consider_clock, because the clock divider step is different from that of host controller. Signed-off-by: Jeongbae Seo <jeongbae.seo@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Jeongbae Seo authored
This patch adds support for additional host capabilities like SD/MMC high speed, SDHCI bus width, etc. Signed-off-by: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Aries Lee authored
Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Michal Miroslaw authored
In case of failure, mmc_attach_sdio() will power off the SD bus. Power it up and reinitialize before trying SD memory detection. Reported-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Ohad Ben-Cohen authored
Upon system resume, SDIO core must reinitialize cards that were powered off during suspend. If the card had its power kept during suspend (and thus it is 'powered-resumed'), SDIO core performs only a limited reinitializing, mainly needed to make sure that the card wasn't removed/replaced. If a __nonremovable__ card is powered-resumed, we can safely skip the reinitializing phase. Note: 9b966aae (mmc: sdio: fully reconfigure oldcard on resume) removed the bus width reconfiguration since mmc_sdio_init_card already does it. It is brought back now in case mmc_sdio_init_card is skipped. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Ohad Ben-Cohen authored
Initial SDIO runtime PM implementation took a conservative approach of powering up cards (and fully reinitializing them) on system suspend, just before the suspend handlers of the relevant drivers were executed. To avoid redundant power and reinitialization cycles, this patch removes this behavior: if a card is already powered off when system suspend kicks in, it is left at that state. If a card is active when a system sleep starts, everything is straightforward and works exactly like before. But if the card was already suspended before the sleep began, then when the MMC core powers it back up on resume, its run-time PM status has to be updated to reflect the actual post-system sleep status. The technique to do that is borrowed from the I2C runtime PM implementation (for more info see Documentation/power/runtime_pm.txt). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Ohad Ben-Cohen authored
mmc_rescan() checks whether registered cards are still present before skipping them, by calling the bus-specific ->detect() handler. With buses that support runtime PM, the card may be powered off at this point, so they need to be powered on and fully reinitialized before ->detect() executes. This whole process is redundant with nonremovable cards; in those cases, we can safely skip calling ->detect() and implicitly assume its success. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Takashi Iwai authored
JMicron 388 SD/MMC combo controller supports the 1.8V low-voltage for SD, but MMC doesn't work with the low-voltage, resulting in an error at probing. This patch adds the support for multiple voltage mask per device type, so that SD works with 1.8V while MMC forces 3.3V. Here new ocr_avail_* fields for each device are introduced, so that the actual OCR mask is switched dynamically. Also, the restriction of low-voltage in core/sd.c is removed when the bit is allowed explicitly via ocr_avail_sd mask. This patch was rewritten from scratch based on Aries' original code. Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Philip Rakity authored
More information should be shown when sdhci_dumpregs is called. Knowing the command is useful for debugging, and Capability 1 is useful for SD v3. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Linus Walleij authored
This patch modifies the MMC core code to optionally call the set_ios() operation on the driver with the clock frequency set to 0 (gate) after a grace period of at least 8 MCLK cycles, then restore it (ungate) before any new request. This gives the driver the option to shut down the MCI clock to the MMC/SD card when the clock frequency is 0, i.e. the core has stated that the MCI clock does not need to be generated. It is inspired by existing clock gating code found in the OMAP and Atmel drivers and brings this up to the host abstraction. Gating is performed before and after any MMC request. This patchset implements this for the MMCI/PL180 MMC/SD host controller, but it should be simple to switch OMAP/Atmel over to using this instead. mmc_set_{gated,ungated}() add variable protection to the state holders for the clock gating code. This is particularly important when ordinary .set_ios() calls would race with the .set_ios() call resulting from a delayed gate operation. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Chris Ball <cjb@laptop.org> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Jennifer Li authored
This patch disables the broken ADMA on selected O2Micro devices. Signed-off-by: Jennifer Li <Jennifer.li@o2micro.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Axel Lin authored
Remove release_resource() after release_mem_region(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Alberto Panizzo authored
This also fixes the build problem introduced by my previous patch due to unhandled API changes introduced by commit: 99fc5131 (mmc: Move regulator handling closer to core) Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Alberto Panizzo authored
This implementation is based on the pxamci.c driver and it will be used to support the mx31_3ds machine. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Mike Rapoport authored
Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Saeed Bishara <saeed@marvell.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Mike Rapoport authored
Implement an sdhci-pltfm driver for the controller found in the Marvell Dove SoC. Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Saeed Bishara <saeed@marvell.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
- 08 Jan, 2011 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplusLinus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus: hfsplus: %L-to-%ll, macro correction, and remove unneeded braces hfsplus: spaces/indentation clean-up hfsplus: C99 comments clean-up hfsplus: over 80 character lines clean-up hfsplus: fix an artifact in ioctl flag checking hfsplus: flush disk caches in sync and fsync hfsplus: optimize fsync hfsplus: split up inode flags hfsplus: write up fsync for directories hfsplus: simplify fsync hfsplus: avoid useless work in hfsplus_sync_fs hfsplus: make sure sync writes out all metadata hfsplus: use raw bio access for partition tables hfsplus: use raw bio access for the volume headers hfsplus: always use hfsplus_sync_fs to write the volume header hfsplus: silence a few debug printks hfsplus: fix option parsing during remount Fix up conflicts due to VFS changes in fs/hfsplus/{hfsplus_fs.h,unicode.c}
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits) spi/omap: Fix DMA API usage in OMAP MCSPI driver spi/imx: correct the test on platform_get_irq() return value spi/topcliff: Typo fix threhold to threshold spi/dw_spi Typo change diable to disable. spi/fsl_espi: change the read behaviour of the SPIRF spi/mpc52xx-psc-spi: move probe/remove to proper sections spi/dw_spi: add DMA support spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs spi/dw_spi: Fix too short timeout in spi polling loop spi/pl022: convert running variable spi/pl022: convert busy flag to a bool spi/pl022: pass the returned sglen to the DMA engine spi/pl022: map the buffers on the DMA engine spi/topcliff_pch: Fix data transfer issue spi/imx: remove autodetection spi/pxa2xx: pass of_node to spi device and set a parent device spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add CE4100 support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
-
- 07 Jan, 2011 10 commits
-
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Constify function scope static struct sched_param usage sched: Fix strncmp operation sched: Move sched_autogroup_exit() to free_signal_struct() sched: Fix struct autogroup memory leak sched: Mark autogroup_init() __init sched: Consolidate the name of root_task_group and init_task_group
-
Linus Torvalds authored
Merge branch 'x86-apic-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: apic: Cleanup and simplify setup_local_APIC() x86: Further simplify mp_irq info handling x86: Unify 3 similar ways of saving mp_irqs info x86, ioapic: Avoid writing io_apic id if already correct x86, x2apic: Don't map lapic addr for preenabled x2apic systems x86, sfi: Use register_lapic_address() x86, apic: Use register_lapic_address() in init_apic_mapping() x86, apic: Remove early_init_lapic_mapping() x86, apic: Unify identical register_lapic_address() functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, MCE: Fix NB error formatting EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bit EDAC, MCE: Enable MCE decoding on F15h EDAC, MCE: Allow F15h bank 6 MCE injection EDAC, MCE: Shorten error report formatting EDAC, MCE: Overhaul error fields extraction macros EDAC, MCE: Add F15h FP MCE decoder EDAC, MCE: Add F15 EX MCE decoder EDAC, MCE: Add an F15h NB MCE decoder EDAC, MCE: No F15h LS MCE decoder EDAC, MCE: Add F15h CU MCE decoder EDAC, MCE: Add F15h IC MCE decoder EDAC, MCE: Add F15h DC MCE decoder EDAC, MCE: Select extended error code mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'edac-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Disable DRAM ECC injection on K8 EDAC: Fixup scrubrate manipulation amd64_edac: Remove two-stage initialization amd64_edac: Check ECC capabilities initially amd64_edac: Carve out ECC-related hw settings amd64_edac: Remove PCI ECS enabling functions amd64_edac: Remove explicit Kconfig PCI dependency amd64_edac: Allocate driver instances dynamically amd64_edac: Rework printk macros amd64_edac: Rename CPU PCI devices amd64_edac: Concentrate per-family init even more amd64_edac: Cleanup the CPU PCI device reservation amd64_edac: Simplify CPU family detection amd64_edac: Add per-family init function amd64_edac: Use cached extended CPU model amd64_edac: Remove F11h support
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (65 commits) [S390] prevent unneccesary loops_per_jiffy recalculation [S390] cpuinfo: use get_online_cpus() instead of preempt_disable() [S390] smp: remove cpu hotplug messages [S390] mutex: enable spinning mutex on s390 [S390] mutex: Introduce arch_mutex_cpu_relax() [S390] cio: fix ccwgroup unregistration race condition [S390] perf: add DWARF register lookup for s390 [S390] cleanup ftrace backend functions [S390] ptrace cleanup [S390] smp/idle: call init_idle() before starting a new cpu [S390] smp: delay idle task creation [S390] dasd: Correct retry counter for terminated I/O. [S390] dasd: Add support for raw ECKD access. [S390] dasd: Prevent deadlock during suspend/resume. [S390] dasd: Improve handling of stolen DASD reservation [S390] dasd: do path verification for paths added at runtime [S390] dasd: add High Performance FICON multitrack support [S390] cio: reduce memory consumption of itcw structures [S390] nmi: enable machine checks early [S390] qeth: buffer count imbalance ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (67 commits) ARM: mach-shmobile: update for SMP changes. ARM: mach-shmobile: update for GIC changes. ARM: mach-shmobile: Fix up clkdev fallout for SH73A0. dma: shdma: don't register the global die notifier multiple times ARM: mach-shmobile: Rely on run-time IRQ handlers ARM: mach-shmobile: Run-time IRQ handler for GIC ARM: mach-shmobile: Run-time IRQ handler for INTCA ARM: mach-shmobile: Enable CONFIG_MULTI_IRQ_HANDLER ARM: mach-shmobile: Use shared GIC entry macros ARM: mach-shmobile: mackerel: Add zboot support ARM: mach-shmobile: mackerel: Add HDMI sound support ARM: mach-shmobile: mackerel: add HDMI video support ARM: mach-shmobile: ap4evb: fixup clk_put timing of fsib_clk ARM: mach-shmobile: sh73a0: fix div4 table ARM: mach-shmobile: ap4/mackerel: modify wrong comment out of USB ARM: mach-shmobile: Mackerel VGA camera support mmc: sh_mmcif: make DMA support by the driver unconditional ARM: mach-shmobile: Add eMMC support through MMCIF on AG5EVM ARM: mach-shmobile: Use pullups for AG5EVM KEYSC pins ARM: mach-shmobile: sh73a0 GPIO pullup improvement ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits) Input: wacom_w8001 - support pen or touch only devices Input: wacom_w8001 - use __set_bit to set keybits Input: bu21013_ts - fix misuse of logical operation in place of bitop Input: i8042 - add Acer Aspire 5100 to the Dritek list Input: wacom - add support for digitizer in Lenovo W700 Input: psmouse - disable the synaptics extension on OLPC machines Input: psmouse - fix up Synaptics comment Input: synaptics - ignore bogus mt packet Input: synaptics - add multi-finger and semi-mt support Input: synaptics - report clickpad property input: mt: Document interface updates Input: fix double equality sign in uevent Input: introduce device properties hid: egalax: Add support for Wetab (726b) Input: include MT library as source for kerneldoc MAINTAINERS: Update input-mt entry hid: egalax: Add support for Samsung NB30 netbook hid: egalax: Document the new devices in Kconfig hid: egalax: Add support for Wetab hid: egalax: Convert to MT slots ... Fixed up trivial conflict in drivers/input/keyboard/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits) serial: apbuart: Fixup apbuart_console_init() TTY: Add tty ioctl to figure device node of the system console. tty: add 'active' sysfs attribute to tty0 and console device drivers: serial: apbuart: Handle OF failures gracefully Serial: Avoid unbalanced IRQ wake disable during resume tty: fix typos/errors in tty_driver.h comments pch_uart : fix warnings for 64bit compile 8250: fix uninitialized FIFOs ip2: fix compiler warning on ip2main_pci_tbl specialix: fix compiler warning on specialix_pci_tbl rocket: fix compiler warning on rocket_pci_ids 8250: add a UPIO_DWAPB32 for 32 bit accesses 8250: use container_of() instead of casting serial: omap-serial: Add support for kernel debugger serial: fix pch_uart kconfig & build drivers: char: hvc: add arm JTAG DCC console support RS485 documentation: add 16C950 UART description serial: ifx6x60: fix memory leak serial: ifx6x60: free IRQ on error Serial: EG20T: add PCH_UART driver ... Fixed up conflicts in drivers/serial/apbuart.c with evil merge that makes the code look fairly sane (unlike either side).
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits) [SCSI] arcmsr: fix write to device check [SCSI] lpfc: lower stack use in lpfc_fc_frame_check [SCSI] eliminate an unnecessary local variable from scsi_remove_target() [SCSI] libiscsi: use bh locking instead of irq with session lock [SCSI] libiscsi: do not take host lock in queuecommand [SCSI] be2iscsi: fix null ptr when accessing task hdr [SCSI] be2iscsi: fix gfp use in alloc_pdu [SCSI] libiscsi: add more informative failure message during iscsi scsi eh [SCSI] gdth: Add missing call to gdth_ioctl_free [SCSI] bfa: remove unused defintions and misc cleanups [SCSI] bfa: remove inactive functions [SCSI] bfa: replace bfa_assert with WARN_ON [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list. [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout. [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure. [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts. [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs. [SCSI] qla2xxx: Remove redundant module parameter permission bits [SCSI] qla2xxx: Add sysfs node for displaying board temperature. [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code. ...
-