- 23 Jan, 2020 3 commits
-
-
Nikolay Borisov authored
Add basic infrastructure to create and link dummy btrfs_devices. This will be used in the pending btrfs_rmap_block test which deals with the block groups. Calling btrfs_alloc_dummy_device will link the newly created device to the passed fs_info and the test framework will free them once the test is finished. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nikolay Borisov authored
It's used only during initial block group reading to map physical address of super block to a list of logical ones. Make it private to block-group.c, add proper kernel doc and ensure it's exported only for tests. Signed-off-by:
-
David Sterba authored
There's a report where objtool detects unreachable instructions, eg.: fs/btrfs/ctree.o: warning: objtool: btrfs_search_slot()+0x2d4: unreachable instruction This seems to be a false positive due to compiler version. The cause is in the ASSERT macro implementation that does the conditional check as IS_DEFINED(CONFIG_BTRFS_ASSERT) and not an #ifdef. To avoid that, use the ifdefs directly. There are still 2 reports that aren't fixed: fs/btrfs/extent_io.o: warning: objtool: __set_extent_bit()+0x71f: unreachable instruction fs/btrfs/relocation.o: warning: objtool: find_data_references()+0x4e0: unreachable instruction Co-developed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 20 Jan, 2020 37 commits
-
-
Anand Jain authored
We had a report indicating that some read errors aren't reported by the device stats in the userland. It is important to have the errors reported in the device stat as user land scripts might depend on it to take the reasonable corrective actions. But to debug these issue we need to be really sure that request to reset the device stat did not come from the userland itself. So log an info message when device error reset happens. For example: BTRFS info (device sdc): device stats zeroed by btrfs(9223) Reported-by: philip@philip-seeger.de Link: https://www.spinics.net/lists/linux-btrfs/msg96528.htmlReviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Josef Bacik authored
We noticed that we were having regular CG OOM kills in cases where there was still enough dirty pages to avoid OOM'ing. It turned out there's this corner case in btrfs's handling of range_cyclic where files that were being redirtied were not getting fully written out because of how we do range_cyclic writeback. We unconditionally were setting scanned = 1; the first time we found any pages in the inode. This isn't actually what we want, we want it to be set if we've scanned the entire file. For range_cyclic we could be starting in the middle or towards the end of the file, so we could write one page and then not write any of the other dirty pages in the file because we set scanned = 1. Fix this by not setting scanned = 1 if we find pages. The rules for setting scanned should be 1) !range_cyclic. In this case we have a specified range to write out. 2) range_cyclic && index == 0. In this case we've started at the beginning and there is no need to loop around a second time. 3) range_cyclic && we started at index > 0 and we've reached the end of the file without satisfying our nr_to_write. This patch fixes both of our writepages implementations to make sure these rules hold true. This fixed our over zealous CG OOMs in production. Fixes: d1310b2e ("Btrfs: Split the extent_map code into two parts") Signed-off-by:
-
David Sterba authored
Dan's smatch tool reports fs/btrfs/file-item.c:295 btrfs_lookup_bio_sums() warn: should this be 'count == -1' which points to the while (count--) loop. With count == 0 the check itself could decrement it to -1. There's a WARN_ON a few lines below that has never been seen in practice though. It turns out that the value of page_bytes_left matches the count (by sectorsize multiples). The loop never reaches the state where count would go to -1, because page_bytes_left == 0 is found first and this breaks out. For clarity, use only plain check on count (and only for positive value), decrement safely inside the loop. Any other discrepancy after the whole bio list processing should be reported by the exising WARN_ON_ONCE as well. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
David Sterba authored
This is a leftover from recently removed bio scheduling framework. Fixes: ba8a9d07 ("Btrfs: delete the entire async bio submission framework") Reviewed-by:
-
Johannes Thumshirn authored
btrfs_get_alloc_profile() is a simple wrapper over get_alloc_profile(). The only difference is btrfs_get_alloc_profile() is visible to other functions in btrfs while get_alloc_profile() is static and thus only visible to functions in block-group.c. Let's just fold get_alloc_profile() into btrfs_get_alloc_profile() to get rid of the unnecessary second function. Reviewed-by:
Johannes Thumshirn <jth@kernel.org> Reviewed-by:
-
Dennis Zhou authored
From Dave's testing described below, it's possible to drive a file system to have bogus values of discardable_extents and _bytes. As btrfs_discard_calc_delay() is the only user of discardable_extents, we can correct here for any negative discardable_extents/discardable_bytes. The problem is not reliably reproducible. The workload that created it was based on linux git tree, switching between release tags, then everytihng deleted followed by a full rebalance. At this state the values of discardable_bytes was 16K and discardable_extents was -1, expected values 0 and 0. Repeating the workload again did not correct the bogus values so the offset seems to be stable once it happens. Reported-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Dennis Zhou authored
Most callers of free_bitmap() only call it if bitmap_info->bytes is 0. However, there are certain cases where we may free the free space cache via __btrfs_remove_free_space_cache(). This exposes a path where free_bitmap() is called regardless. This may result in a bad accounting situation for discardable_bytes and discardable_extents. So, remove the stats and call btrfs_discard_update_discardable(). Signed-off-by:
-
Dennis Zhou authored
It's less than ideal for small extents to eat into our extent budget, so force extents <= 32KB into the bitmaps save for the first handful. Reviewed-by:
-
Dennis Zhou authored
Currently, there is no way for the free space cache to recover from being serviced by purely bitmaps because the extent threshold is set to 0 in recalculate_thresholds() when we surpass the metadata allowance. This adds a recovery mechanism by keeping large extents out of the bitmaps and increases the metadata upper bound to 64KB. The recovery mechanism bypasses this upper bound, thus making it a soft upper bound. But, with the bypass being 1MB or greater, it shouldn't add unbounded overhead. Reviewed-by:
-
Dennis Zhou authored
Give a brief overview for how async discard is implemented. Reviewed-by:
-
Dennis Zhou authored
Keep track of how much we are discarding and how often we are reusing with async discard. The discard_*_bytes values don't need any special protection because the work item provides the single threaded access. Reviewed-by:
-
Dennis Zhou authored
As mentioned earlier, discarding data can be done either by issuing an explicit discard or implicitly by reusing the LBA. Metadata block_groups see much more frequent reuse due to well it being metadata. So instead of explicitly discarding metadata block_groups, just leave them be and let the latter implicit discarding be done for them. For mixed block_groups, block_groups which contain both metadata and data, we let them be as higher fragmentation is expected. Reviewed-by:
-
Dennis Zhou authored
Non-block group destruction discarding currently only had a single list with no minimum discard length. This can lead to caravaning more meaningful discards behind a heavily fragmented block group. This adds support for multiple lists with minimum discard lengths to prevent the caravan effect. We promote block groups back up when we exceed the BTRFS_ASYNC_DISCARD_MAX_FILTER size, currently we support only 2 lists with filters of 1MB and 32KB respectively. Reviewed-by:
-
Dennis Zhou authored
Expose max_discard_size as a tunable via sysfs and switch the current fixed maximum to the default value. Signed-off-by:
-
Dennis Zhou authored
Throttle the maximum size of a discard so that we can provide an upper bound for the rate of async discard. While the block layer is able to split discards into the appropriate sized discards, we want to be able to account more accurately the rate at which we are consuming NCQ slots as well as limit the upper bound of work for a discard. Reviewed-by:
-
Dennis Zhou authored
Provide the ability to rate limit based on kbps in addition to iops as additional guides for the target discard rate. The delay used ends up being max(kbps_delay, iops_delay). Signed-off-by:
-
Dennis Zhou authored
An earlier patch keeps track of discardable_extents. These are undiscarded extents managed by the free space cache. Here, we will use this to dynamically calculate the discard delay interval. There are 3 rate to consider. The first is the target convergence rate, the rate to discard all discardable_extents over the BTRFS_DISCARD_TARGET_MSEC time frame. This is clamped by the lower limit, the iops limit or BTRFS_DISCARD_MIN_DELAY (1ms), and the upper limit, BTRFS_DISCARD_MAX_DELAY (1s). We reevaluate this delay every transaction commit. Reviewed-by:
-
Dennis Zhou authored
Keep track of this metric so that we can understand how ahead or behind we are in discarding rate. This uses the same accounting method as discardable_extents, deltas between previous/current values and propagating them up. Signed-off-by:
-
Dennis Zhou authored
The number of discardable extents will serve as the rate limiting metric for how often we should discard. This keeps track of discardable extents in the free space caches by maintaining deltas and propagating them to the global count. The deltas are calculated from 2 values stored in PREV and CURR entries, then propagated up to the global discard ctl. The current counter value becomes the previous counter value after update. Signed-off-by:
-
Dennis Zhou authored
Setup base sysfs directory for discard stats + tunables. Reviewed-by:
-
Dennis Zhou authored
Btrfs only allowed attributes to be exposed in debug/. Let's let other groups be created by making debug its own kobject. This also makes the per-fs debug options separate from the global features mount attributes. This seems to be needed as sysfs_create_files() requires const struct attribute * while sysfs_create_group() can take struct attribute *. This seems nicer as per file system, you'll probably use to_fs_info(). Reviewed-by:
-
Dennis Zhou authored
We probably should call sysfs_remove_group() on debug/. Reviewed-by:
-
Dennis Zhou authored
The prior two patches added discarding via a background workqueue. This just piggybacked off of the fstrim code to trim the whole block at once. Well inevitably this is worse performance wise and will aggressively overtrim. But it was nice to plumb the other infrastructure to keep the patches easier to review. This adds the real goal of this series which is discarding slowly (ie. a slow long running fstrim). The discarding is split into two phases, extents and then bitmaps. The reason for this is two fold. First, the bitmap regions overlap the extent regions. Second, discarding the extents first will let the newly trimmed bitmaps have the highest chance of coalescing when being readded to the free space cache. Reviewed-by:
-
Dennis Zhou authored
block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by:
-
Dennis Zhou authored
When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: -
Dennis Zhou authored
There is a cap in btrfs in the amount of free extents that a block group can have. When it surpasses that threshold, future extents are placed into bitmaps. Instead of keeping track of if a certain bit is trimmed or not in a second bitmap, keep track of the relative state of the bitmap. With async discard, trimming bitmaps becomes a more frequent operation. As a trade off with simplicity, we keep track of if discarding a bitmap is in progress. If we fully scan a bitmap and trim as necessary, the bitmap is marked clean. This has some caveats as the min block size may skip over regions deemed too small. But this should be a reasonable trade off rather than keeping a second bitmap and making allocation paths more complex. The downside is we may overtrim, but ideally the min block size should prevent us from doing that too often and getting stuck trimming pathological cases. BTRFS_TRIM_STATE_TRIMMING is added to indicate a bitmap is in the process of being trimmed. If additional free space is added to that bitmap, the bit is cleared. A bitmap will be marked BTRFS_TRIM_STATE_TRIMMED if the trimming code was able to reach the end of it and the former is still set. Reviewed-by:
-
Dennis Zhou authored
Async discard will use the free space cache as backing knowledge for which extents to discard. This patch plumbs knowledge about which extents need to be discarded into the free space cache from unpin_extent_range(). An untrimmed extent can merge with everything as this is a new region. Absorbing trimmed extents is a tradeoff to for greater coalescing which makes life better for find_free_extent(). Additionally, it seems the size of a trim isn't as problematic as the trim io itself. When reading in the free space cache from disk, if sync is set, mark all extents as trimmed. The current code ensures at transaction commit that all free space is trimmed when sync is set, so this reflects that. Signed-off-by:
-
Dennis Zhou authored
This series introduces async discard which will use the flag DISCARD_ASYNC, so rename the original flag to DISCARD_SYNC as it is synchronously done in transaction commit. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Dennis Zhou authored
Bitmaps are fairly popular for their space efficiency, but we don't have generic iterators available. Make percpu's bitmap region iterators available to everyone. Reviewed-by:
-
Qu Wenruo authored
[PROBLEM] There is a user report in the mail list, showing the following corrupted tree blocks: item 62 key (486836 DIR_ITEM 2543451757) itemoff 6273 itemsize 74 location key (4065004 INODE_ITEM 1073741824) type FILE transid 21397 data_len 0 name_len 44 name: FILENAME Note that location key, its offset should be 0 for all INODE_ITEMS. This caused failed lookup of the inode. [CAUSE] That offending value, 1073741824, is 0x40000000. So this looks like a memory bit flip. [FIX] This patch will enhance tree-checker to check location key of DIR_INDEX/DIR_ITEM/XATTR_ITEM. There are several different combinations needs to check: - item_key.type == DIR_INDEX/DIR_ITEM * location_key.type == BTRFS_INODE_ITEM_KEY This location_key should follow the check in inode_item check. * location_key.type == BTRFS_ROOT_ITEM_KEY Despite the existing check, DIR_INDEX/DIR_ITEM can only points to subvolume trees. * All other keys are not allowed. - item_key.type == XATTR_ITEM location_key should be all 0. Reported-by:Mike Gilbert <floppymaster@gmail.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
ROOT_ITEM key check itself is not as simple as single line check, and will be reused for both ROOT_ITEM and DIR_ITEM/DIR_INDEX location key check, so refactor such check into check_root_key(). Also since we are here, fix a comment error about ROOT_ITEM offset, which is transid of snapshot creation, not some "older kernel behavior". Reviewed-by:
-
Qu Wenruo authored
Inode key check is not as easy as several lines, and it will be called in more than one location (INODE_ITEM check and DIR_ITEM/DIR_INDEX/XATTR_ITEM location key check). So here refactor such check into check_inode_key(). And add extra checks for XATTR_ITEM. Reviewed-by:
-
Qu Wenruo authored
The @fs_info parameter can be extracted from extent_buffer structure, and there are already some wrappers getting rid of the @fs_info parameter. Reviewed-by:
-
Qu Wenruo authored
Inspired by btrfs-progs github issue #208, where chunk item in chunk tree has invalid num_stripes (0). Although that can already be caught by current btrfs_check_chunk_valid(), that function doesn't really check item size as it needs to handle chunk item in super block sys_chunk_array(). This patch will add two extra checks for chunk items in chunk tree: - Basic chunk item size If the item is smaller than btrfs_chunk (which already contains one stripe), exit right now as reading num_stripes may even go beyond eb boundary. - Item size check against num_stripes If item size doesn't match with calculated chunk size, then either the item size or the num_stripes is corrupted. Error out anyway. Reviewed-by:
-
zhengbin authored
Fixes coccicheck warning: fs/btrfs/print-tree.c:320:3-4: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
Omar Sandoval authored
This hasn't been used since it was first introduced in commit b4bd745d ("btrfs: Introduce find_free_extent_ctl structure for later rework"). Passing that to btrfs_add_reserved_bytes in find_free_extent is not strictly necessary and using the local ram_bytes instead seems cleaner. Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Omar Sandoval authored
Commit 7087a9d8 ("btrfs: Remove extent_io_ops::writepage_end_io_hook") left this logic in a confusing state. Simplify it. Reviewed-by:
-
