- 01 Jun, 2015 14 commits
-
-
Bart Van Assche authored
Instead of starting a thread from transport_clear_lun_ref() that waits for LUN shutdown, wait in that function for LUN shutdown to finish. Additionally, change the return type of transport_clear_lun_ref() from int to void. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Christoph Hellwig authored
Consolidate the implementation of the backend attributes in a single file and single function per attribute show/store function instead of splitting it into multiple functions in multiple files. Also use the proper strto* helpers for exposed data types, add macros to implement the store methods for the most common data types and share the show methods between the two different attribute implementations. (Fix bogus store_pi_prot_format flag=0 return value - nab) Signed-off-by:
-
Christoph Hellwig authored
Provide a common sets of dev_attrib attributes for all devices using the generic SPC/SBC parsers, and a second one with the minimal required read-only attributes for passthrough devices. The later is only used by pscsi for now, but will be wired up for the full-passthrough TCMU use case as well. Signed-off-by:
-
Christoph Hellwig authored
Rewrite the backend driver registration based on what we did to the fabric drivers: introduce a read-only struct target_bakckend_ops that the driver registers, which is then instanciate as a struct target_backend by the core. This allows the ops vector to be smaller and allows us to mark it const. At the same time the registration function can set up the configfs attributes, avoiding the need to add additional boilerplate code for that to the drivers. Signed-off-by:
-
Nicholas Bellinger authored
Now that se_portal_group->tpg_lun_hlist is a RCU protected hlist, go ahead and drop the left-over lun->lun_status usage. Reported-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Nicholas Bellinger authored
This patch changes core_tpg_add_node_to_devs() to avoid unnecessarly resetting every se_dev_entry in se_node_acl->tpg_lun_hlist when the operation is driven by an explicit configfs se_lun->lun_group creation via core_dev_add_lun() to only update a single se_lun. Otherwise for the second core_tpg_check_initiator_node_acl() case, go ahead and continue to scan the full set of currently active se_lun in se_portal_group->tpg_lun_hlist. Reviewed-by:
-
Nicholas Bellinger authored
Reviewed-by:
-
Nicholas Bellinger authored
This patch converts core_tpg_deregister() to perform a list splice for any remaining dynamically generated se_node_acls attached to se_tpg, before calling kfree(nacl) to free memory. Reviewed-by:
-
Nicholas Bellinger authored
This patch converts se_tpg->acl_node_lock to struct mutex, so that ->acl_node_acl walkers in core_clear_lun_from_tpg() can block when calling core_disable_device_list_for_node(). It also updates core_dev_add_lun() to hold ->acl_node_mutex when calling core_tpg_add_node_to_devs() to build ->lun_entry_hlist for dynamically generated se_node_acl. Reviewed-by:
-
Nicholas Bellinger authored
This patch converts the fixed size se_portal_group->tpg_lun_list[] to use modern RCU with hlist_head in order to support an arbitary number of se_lun ports per target endpoint. It includes dropping core_tpg_alloc_lun() from core_dev_add_lun(), and calling it directly from target_fabric_make_lun() to allocate a new se_lun. And add a new target_fabric_port_release() configfs item callback to invoke kfree_rcu() to release memory during se_lun->lun_group shutdown. Also now that se_node_acl->lun_entry_hlist is using RCU, convert existing tpg_lun_lock to struct mutex so core_tpg_add_node_to_devs() can perform RCU updater logic without releasing ->tpg_lun_mutex. Also, drop core_tpg_clear_object_luns() and it's single consumer in iscsi-target, which is duplicating TPG LUN shutdown logic and is current code results in a NOP. Finally, sbp-target and xen-scsiback fabric driver conversions are included, which are required due to the non-standard way they use ->tpg_lun_hlist. Reviewed-by:
-
Christoph Hellwig authored
Clean up the mess of registered variables, and pass the isid mismatch flag explicitly instead of overloading the registration type. Signed-off-by:
-
Nicholas Bellinger authored
This patch changes __core_scsi3_do_alloc_registration() code to drop pr_reg->pr_reg_tg_pt_lun pointer usage in favor of a new pr_reg RPTI + existing pr_reg->pr_aptpl_target_lun used by APTPL metadata logic. It also includes changes to REGISTER, REGISTER_AND_MOVE and APTPL feature bit codepaths to use rcu_dereference_check() with the expected non-zero se_dev_entry->pr_kref reference held. Reviewed-by:
-
Nicholas Bellinger authored
This patch converts the core_scsi3_pr_seq_non_holder() check for non reservation holding registrations to use an atomic bitop in ->deve_flags to determine if a registration is currently active. It also includes associated a set_bit() in __core_scsi3_add_registration() and clear_bit() in __core_scsi3_free_registration(), if se_dev_entry still exists, and has not already been released via se_dev_entry shutdown path in core_disable_device_list_for_node(). Also, clear_bit in core_disable_device_list_for_node as well to ensure the read-critical path in core_scsi3_pr_seq_non_holder() picks up the new state, preceeding the final kfree_rcu() call. Reported-by:
-
Nicholas Bellinger authored
This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by:
-
- 31 May, 2015 26 commits
-
-
Christophe Vu-Brugier authored
Signed-off-by:
Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by:
-
Christophe Vu-Brugier authored
Signed-off-by:
-
Christoph Hellwig authored
The only instance of ->put_session is in qla2xxx, and was added by commit aaf68b ("tcm_qla2xxx: Convert to TFO->put_session() usage") with the following description: This patch converts tcm_qla2xxx code to use an internal kref_put() for se_session->sess_kref in order to ensure that qla_hw_data->hardware_lock can be held while calling qlt_unreg_sess() for the final put. But these day we're already holding the hardware lock over qlt_unreg_sess in the ->close_session callback, so we're fine without this method. (Re-add missing tcm_qla2xxx_release_session + drop put_session usage - nab) Signed-off-by:Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
It's only embedded into struct target_fabric_configfs these days, so we might as well remove this layer of abstraction. Signed-off-by:
-
Christoph Hellwig authored
Remove all fields that are either unused or can be replaced by trivially following pointers. Signed-off-by:
-
Christoph Hellwig authored
Now that we don't need to set up ->tf_subsys we don't need to copy around the ops vector anymore. Signed-off-by:
-
Bart Van Assche authored
Detected these variables by building with W=1. Signed-off-by:
-
Bart Van Assche authored
Detected these variables by building with W=1. Signed-off-by:
-
Bart Van Assche authored
Simplify target core and target drivers by storing the task tag a.k.a. command identifier inside struct se_cmd. For several transports (e.g. SRP) tags are 64 bits wide. Hence add support for 64-bit tags. (Fix core_tmr_abort_task conversion spec warnings - nab) (Fix up usb-gadget to use 16-bit tags - HCH + bart) Signed-off-by:
-
Christoph Hellwig authored
Now that struct se_portal_group contains a protocol identifier field we can take all the code to format an parse protocol identifiers in CDBs into common code instead of leaving this to low-level drivers. Signed-off-by:
-
Christoph Hellwig authored
Now that we store the protocol identifier in the tpg structure we don't need this method. Signed-off-by:
-
Christoph Hellwig authored
Remove the unneeded fabric_ptr argument, and change the type argument to pass in a SPC protocol identifier. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Akinobu Mita authored
sbc_dif_generate() and sbc_dif_verify() currently assume that each SG element for data transfer memory doesn't straddle the block size boundary. However, when using SG_IO ioctl, we can choose the data transfer memory which doesn't satisfy that alignment requirement. In order to handle such cases correctly, this change inverts the outer loop to iterate data transfer memory and the inner loop to iterate protection information and enables to calculate CRC for a block which straddles multiple SG elements. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: target-devel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Akinobu Mita authored
This introduces crc_t10dif_update() which enables to calculate CRC for a block which straddles multiple SG elements by calling multiple times. This also converts crc_t10dif() to use crc_t10dif_update() as they are almost same. (remove extra function call in crc_t10dif() and crc_t10dif_update - Tim + Herbert) Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: target-devel@vger.kernel.org Signed-off-by:
-
Akinobu Mita authored
Even if the device backend is initialized with protection info is enabled, some requests don't have the protection info attached for WRITE SAME command issued by block device helpers, WRITE command with WRPROTECT=0 by SG_IO ioctl, etc. So when TCM loopback fabric module is used, se_cmd->t_prot_sg is NULL for these requests and performing WRITE_INSERT of PI using software emulation by sbc_dif_generate() causes kernel crash. To fix this, introduce SCF_PASSTHROUGH_PROT_SG_TO_MEM_NOALLOC for se_cmd_flags, which is used to determine that se_cmd->t_prot_sg needs to be allocated or use pre-allocated protection information by scsi mid-layer. Signed-off-by:
-
Akinobu Mita authored
In sbc_dif_copy_prot(), the addresses passed to kunmap_atomic() are inconsistent with the addresses which are mapped by kmap_atomic(). That could be problematic if an SG element has its length larger than PAGE_SIZE as kunmap_atomic() will attempt to unmap different page. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Split out two common helpers to share code for allocating and initializing node ACLs. Signed-off-by:
-
Christoph Hellwig authored
By always allocating and adding, respectively removing and freeing the se_node_acl structure in core code we can remove tons of repeated code in the init_nodeacl and drop_nodeacl routines. Additionally this now respects the get_default_queue_depth method in this code path as well. Signed-off-by:
-
Christoph Hellwig authored
All fabric drivers except for iSCSI always return 1, so implement that as default behavior. Signed-off-by:
-
Christoph Hellwig authored
Except for the embedded struct se_node_acl none of the fields were ever used. Signed-off-by:
-
Christoph Hellwig authored
Except for the embedded struct se_node_acl none of the fields were ever used. Signed-off-by:
-
