- 30 Jul, 2013 5 commits
-
-
Sylwester Nawrocki authored
By integrating the v4l2-async API internals a bit more with the core overall the v4l2-async code becomes a bit simpler and easier to follow. Acked-and-tested-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sylwester Nawrocki authored
This is a purely cosmetic change. Since the 'subdev' member points to an array of subdevs make it more explicit by renaming to the plural form. Acked-and-tested-by:
-
Sylwester Nawrocki authored
Add support for matching by device_node pointer. This allows the notifier user to simply pass a list of device_node pointers corresponding to sub-devices. Signed-off-by:
-
Sylwester Nawrocki authored
enum v4l2_async_bus_type also selects a method subdevs are matched in the notification handlers, rename it to v4l2_async_match_type so V4L2_ASYNC_MATCH_OF entry can be further added for matching by device tree node pointer. Acked-and-tested-by:
-
Sylwester Nawrocki authored
These match_* functions are internal callbacks and are always invoked only after checking asd->bus_type. So drop redundant checks in match_i2c() and match_platform() functions. Acked-and-tested-by:
-
- 29 Jul, 2013 4 commits
-
-
Maxim Levitsky authored
This way to only way to get debug info is to use dynamic debug, but I left debugging prints to debug hardware issues, and so I want this to be enabled by module param. Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Maxim Levitsky authored
It doesn't hurt and on my notebook despite clearing the wake flag the remote still wakes up the system. This way it doesn't. Signed-off-by:
-
Maxim Levitsky authored
While we can delay IRQ intialization, we need the interrupt number right away because unusually hardware have programable interrupt number, and thus we give it the number that was allocated by BIOS Signed-off-by:
-
Dan Carpenter authored
We have reorganized the error handling into a simpler and more canonical format. Additionally we removed extra empty lines, switched to devm_kzalloc(), and substitute 'minor' by 'ret' in the igorplugusb_remote_probe() function. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
-
- 26 Jul, 2013 31 commits
-
-
Alban Browaeys authored
Set fmt.pix.priv to zero in vidioc_try_fmt_vid_cap. Catched by v4l2-compliance. Signed-off-by:
Alban Browaeys <prahal@yahoo.com> [hans.verkuil@cisco.com: dropping unnecessary change to g_fmt_vid_cap] Signed-off-by:
-
Ondrej Zary authored
Current stereo detection code is wrong - it reads TUNED bit instead of STEREO bit. Fix that and implement signal strength detection too. Also remove useless s_stereo functionn. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Aztech radio card is based on LM7001 chip which is (software) compatible with LM7000. So remove the LM7000-specific code from the driver and use generic code. Also found that the card does not have A0..A2 ISA pins connected, which means that the region size is 8 bytes. Signed-off-by:
-
Ondrej Zary authored
Kodicom 4400R and Geovision GV-800 code in bttv driver abuses mbox_we (int) in struct bttv as char *. Remove this hack and add a proper sw_status array to struct bttv instead. This is a a preparation to remove mbox_we. Signed-off-by:
-
Ondrej Zary authored
Move HW initialization to separate function to allow using the code without the v4l parts. This is needed for use in the bttv driver. Signed-off-by:
-
Ezequiel Garcia authored
This commit adds an early check to vidioc_s_std() to detect if the new and current standards are equal, and exit with success in that case. This is needed to prevent userspace applications that might attempt to re-set the same standard from failing if that's done when streaming has started. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
Ezequiel Garcia authored
Remove the check as there's no reason to prevent the input from being set when the device is streaming. This allows surveillance applications (such as motion, zoneminder, etc.) to configure the input while streaming. Reported-by:
Sergey 'Jin' Bostandzhyan <jin@mediatomb.cc> Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Vladimir Barinov authored
ML86V7667 always transmits top field first for both PAL and NTSC -- that makes application incorrectly treat interlaced fields when relying on the standard. Hence we must set V4L2_FIELD_INTERLACED_TB format explicitly. [Sergei: added a comment.] Reported-by:
Katsuya MATSUBARA <matsu@igel.co.jp> Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by:
-
Lubomir Rintel authored
Alongside already existing Composite input. Signed-off-by:
-
Alexey Khoroshilov authored
check_firmware() makes sure firmware is in a device. It returns zero on success and error code otherwise. Also it sets down_firmware flag to 1 if downloading occurs. The only caller poseidon_probe() checks down_firmware flag and returns 0 without any initialization if it is set. That looks very strange, so the patch removes down_firmware argument of check_firmware() and returns error code if check_firmware() fails in poseidon_probe(). Not tested on real hardware. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Alexey Khoroshilov authored
All poseidon init functions properly return error codes, but they are ignored by poseidon_probe(). The patch implements handling of error cases. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean Signed-off-by:
Libo Chen <libo.chen@huawei.com> Acked-by:
-
Libin Yang authored
This patch switchs to resource managed allocation and request in mmp-driver. It can remove free resource operations. Signed-off-by:
Albert Wang <twang13@marvell.com> Signed-off-by:
Libin Yang <lbyang@marvell.com> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Libin Yang authored
This patch adds the SOFx/EOFx pair check for marvell-ccic. When switching format, the last EOF may not arrive when stop streamning. And the EOF will be detected in the next start streaming. Must ensure clear the left over frame flags before every really start streaming. Signed-off-by:
-
Libin Yang authored
This patch adds some planar formats support for marvell-ccic. Signed-off-by:
-
Libin Yang authored
This patch refines mcam_set_contig_buffer() in mcam core. It can remove redundant code line and enhance readability. Signed-off-by:
-
Libin Yang authored
This patch adds the reset ccic phy operation when stop streaming. Stop streaming without reset ccic phy, the next start streaming may be unstable. Also need add CCIC2 definition when PXA688/PXA2128 support dual ccics. Signed-off-by:
-
Libin Yang authored
This patch adds the clock tree support for marvell-ccic. Signed-off-by:
-
Libin Yang authored
This patch adds the MIPI support for marvell-ccic. Board driver should determine whether using MIPI or not. Signed-off-by:
-
Lad, Prabhakar authored
add OF support for the adv7343 driver. Signed-off-by:
-
Lad, Prabhakar authored
This patch makes the platform data members as array wherever possible, so as this makes easier while collecting the data in DT case and read the entire array at once. This patch also makes appropriate changes to board-da850-evm.c Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. Signed-off-by:
-
Lad, Prabhakar authored
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. Signed-off-by:
-
Lad, Prabhakar authored
Both synchronous and asynchronous tvp514x subdevice probing is supported by this patch. This patch also fixes the error path by calling media_entity_cleanup() on failure in probe when CONFIG_MEDIA_CONTROLLER is enabled. Signed-off-by:
-
Lad, Prabhakar authored
Both synchronous and asynchronous tvp7002 subdevice probing is supported by this patch. Signed-off-by:
-
Lad, Prabhakar authored
Both synchronous and asynchronous adv7343 subdevice probing is supported by this patch. Signed-off-by:
-
