- 16 Jul, 2007 38 commits
-
-
Dan Aloni authored
Signed-off-by:
Dan Aloni <da-x@monatomic.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Mundt authored
This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by:
Christoph Lameter <clameter@sgi.com> Acked-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Jason Baron authored
In the new madvise_need_mmap_write() call we can avoid an extra case statement and function call as follows. Signed-off-by:
Jason Baron <jbaron@redhat.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Adrian Bunk authored
start_cpu_timer() should be __cpuinit (which also matches what it's callers are). __devinit didn't cause problems, it simply wasted a few bytes of memory for the common CONFIG_HOTPLUG_CPU=n case. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Paul Mundt authored
Currently zone_spanned_pages_in_node() and zone_absent_pages_in_node() are non-static for ARCH_POPULATES_NODE_MAP and static otherwise. However, only the non-static versions are __meminit annotated, despite only being called from __meminit functions in either case. zone_init_free_lists() is currently non-static and not __meminit annotated either, despite only being called once in the entire tree by init_currently_empty_zone(), which too is __meminit. So make it static and properly annotated. Signed-off-by:
-
Jan Beulich authored
This symbol got orphaned quite a while ago. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Jan Beulich authored
Kill pte_rdprotect(), pte_exprotect(), pte_mkread(), pte_mkexec(), pte_read(), pte_exec(), and pte_user() except where arch-specific code is making use of them. Signed-off-by:
-
Jan Beulich authored
.. which modpost started warning about. Signed-off-by:
-
Paul Mundt authored
Enabling debugging fails to build due to the nodemask variable in do_mbind() having changed names, and then oopses on boot due to the assumption that the nodemask can be dereferenced -- which doesn't work out so well when the policy is changed to MPOL_DEFAULT with a NULL nodemask by numa_default_policy(). This fixes it up, and switches from PDprintk() to pr_debug() while we're at it. Signed-off-by:
-
Ethan Solomita authored
get_user_pages() can try to allocate a nearly unlimited amount of memory on behalf of a user process, even if that process has been OOM killed. The OOM kill occurs upon return to user space via a SIGKILL, but get_user_pages() will try allocate all its memory before returning. Change get_user_pages() to check for TIF_MEMDIE, and if set then return immediately. Signed-off-by:
Ethan Solomita <solo@google.com> Signed-off-by:
-
Paul Mundt authored
This converts the default system init memory policy to use a dynamically created node map instead of defaulting to all online nodes. Nodes of a certain size (>= 16MB) are judged to be suitable for interleave, and are added to the map. If all nodes are smaller in size, the largest one is automatically selected. Without this, tiny nodes find themselves out of memory before we even make it to userspace. Systems with large nodes will notice no change. Only the system init policy is effected by this change, the regular MPOL_DEFAULT policy is still switched to later on in the boot process as normal. Signed-off-by:
-
Christoph Lameter authored
Add a new configuration variable CONFIG_SLUB_DEBUG_ON If set then the kernel will be booted by default with slab debugging switched on. Similar to CONFIG_SLAB_DEBUG. By default slab debugging is available but must be enabled by specifying "slub_debug" as a kernel parameter. Also add support to switch off slab debugging for a kernel that was built with CONFIG_SLUB_DEBUG_ON. This works by specifying slub_debug=- as a kernel parameter. Dave Jones wanted this feature. http://marc.info/?l=linux-kernel&m=118072189913045&w=2 [akpm@linux-foundation.org: clean up switch statement] Signed-off-by:
-
Andrew Morton authored
invalidate_mapping_pages() can sometimes take a long time (millions of pages to free). Long enough for the softlockup detector to trigger. We used to have a cond_resched() in there but I took it out because the drop_caches code calls invalidate_mapping_pages() under inode_lock. The patch adds a nasty flag and puts the cond_resched() back. Signed-off-by:
-
Nick Piggin authored
Add a bugcheck for Andrea's pagefault vs invalidate race. This is triggerable for both linear and nonlinear pages with a userspace test harness (using direct IO and truncate, respectively). Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Joe Jin authored
That static `nid' index needs locking. Without it we can end up calling alloc_pages_node() with an illegal node ID and the kernel crashes. Acked-by:
gurudas pai <gurudas.pai@oracle.com> Cc: <stable@kernel.org> Signed-off-by:
-
Anderson Briglia authored
Fix the shrink_list name on some files under mm/ directory. Signed-off-by:
Anderson Briglia <anderson.briglia@indt.org.br> Signed-off-by:
-
Nick Piggin authored
Remove the core slob allocator's minimum alignment restrictions, and instead introduce the alignment restrictions at the slab API layer. This lets us heed the ARCH_KMALLOC/SLAB_MINALIGN directives, and also use __alignof__ (unsigned long) for the default alignment (which should allow relaxed alignment architectures to take better advantage of SLOB's small minimum alignment). Signed-off-by:
-
Nick Piggin authored
Remove the bigblock lists in favour of using compound pages and going directly to the page allocator. Allocation size is stored in page->private, which also makes ksize more accurate than it previously was. Saves ~.5K of code, and 12-24 bytes overhead per >= PAGE_SIZE allocation. Signed-off-by:
-
Nick Piggin authored
Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by:
-
Robert P. J. Day authored
Given that there is no remaining usage of the deprecated kmem_cache_t typedef anywhere in the tree, remove that typedef. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
-
Eric Dumazet authored
alloc_large_system_hash() is called at boot time to allocate space for several large hash tables. Lately, TCP hash table was changed and its bucketsize is not a power-of-two anymore. On most setups, alloc_large_system_hash() allocates one big page (order > 0) with __get_free_pages(GFP_ATOMIC, order). This single high_order page has a power-of-two size, bigger than the needed size. We can free all pages that wont be used by the hash table. On a 1GB i386 machine, this patch saves 128 KB of LOWMEM memory. TCP established hash table entries: 32768 (order: 6, 393216 bytes) Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Pavel Emelianov authored
This entry prints a header in .start callback. This is OK, but the more elegant solution would be to move this into the .show callback and use seq_list_start_head() in .start one. I have left it as is in order to make the patch just switch to new API and noting more. [adobriyan@sw.ru: Wrong pointer was used as kmem_cache pointer] Signed-off-by:
Pavel Emelianov <xemul@openvz.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
-
Rolf Eike Beer authored
Replace a hand coded version of DIV_ROUND_UP(). Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Nishanth Aravamudan authored
nid is initialized to numa_node_id() but will either be overwritten in the loop or not used in the conditional. So remove the initialization. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Make zonelist creation policy selectable from sysctl/boot option v6. This patch makes NUMA's zonelist (of pgdat) order selectable. Available order are Default(automatic)/ Node-based / Zone-based. [Default Order] The kernel selects Node-based or Zone-based order automatically. [Node-based Order] This policy treats the locality of memory as the most important parameter. Zonelist order is created by each zone's locality. This means lower zones (ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion. IOW. ZONE_DMA will be in the middle of zonelist. current 2.6.21 kernel uses this. Pros. * A user can expect local memory as much as possible. Cons. * lower zone will be exhansted before higher zone. This may cause OOM_KILL. Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL because of ZONE_DMA exhaution and you need the best locality. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. [Zone-based order] This policy treats the zone type as the most important parameter. Zonelist order is created by zone-type order. This means lower zone never be used bofere higher zone exhaustion. IOW. ZONE_DMA will be always at the tail of zonelist. Pros. * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted. Cons. * memory locality may not be best. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. bootoption "numa_zonelist_order=" and proc/sysctl is supporetd. command: %echo N > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Node-based order. command: %echo Z > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Zone-based order. Thanks to Lee Schermerhorn, he gives me much help and codes. [Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order] [akpm@linux-foundation.org: build fix] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com> Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by:
-
Yinghai Lu authored
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Eric W. Biderman authored
Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by:
Eric W. Biderman <ebiderman@xmisson.com> Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Yinghai Lu authored
for earlyprintk=ttyS0,9600 console=tty0 console=ttyS0,9600n8 the handover will happen from earlyser0 to tty0. but what we want is to hand over to ttyS0. Later with serial-convert-early_uart-to-earlycon-for-8250.patch, console=tty0 console=uart8250,io,0x3f8,9600n8 will handover to ttyS0 instead of tty0. Signed-off-by:
-
Yinghai Lu authored
Change name to buf according to the usage as name + index Signed-off-by:
-
Yinghai Lu authored
Some RS-232 devices require DTR to be asserted before they can be used. DTR is normally asserted in uart_startup() when the port is opened. But we don't actually open serial console ports, so assert DTR when the port is added. BTW: earlyprintk and early_uart are hard coded to set DTR/RTS. rmk says The only issue I can think of is the possibility for an attached modem to auto-answer or maybe even auto-dial before the system is ready for it to do so. Might have an undesirable cost implication for some running with such a setup. Apart from that, I can't think of any other side effect of this specific patch. Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Kristian Hoegsberg authored
Remove all ids from the given idr tree. idr_destroy() only frees up unused, cached idp_layers, but this function will remove all id mappings and leave all idp_layers unused. A typical clean-up sequence for objects stored in an idr tree, will use idr_for_each() to free all objects, if necessay, then idr_remove_all() to remove all ids, and idr_destroy() to free up the cached idr_layers. Signed-off-by:
Kristian Hoegsberg <krh@redhat.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Kristian Hoegsberg authored
This patch adds an iterator function for the idr data structure. Compared to just iterating through the idr with an integer and idr_find, this iterator is (almost, but not quite) linear in the number of elements, as opposed to the number of integers in the range covered by the idr. This makes a difference for sparse idrs, but more importantly, it's a nicer way to iterate through the elements. The drm subsystem is moving to idr for tracking contexts and drawables, and with this change, we can use the idr exclusively for tracking these resources. [akpm@linux-foundation.org: fix comment] Signed-off-by:
-
Andy Whitcroft authored
This version brings a number of new checks, fixes for flase positives, plus a clarification of the output to better guide use. Of note: - checks for documentation for new __setup calls - clearer reporting where braces and parenthesis are involved - reports for closing brace and semi-colon spacing - reports on unwanted externs This patch includes an update to the documentation on checkpatch.pl itself to clarify when it should be used and to indicate that it is not intended as the final arbitor of style. Full changelog: Andy Whitcroft (19): Version: 0.07 ensure we do not apply control brace checks to preprocesor directives add {u,s}{8,16,32,64} to the type matcher accept lack of spacing after the semicolons in for (;;) report new externs in .c files fix up typedef exclusion for function prototypes else trailing statements check need to account for \ at end of line add enums to the type matcher add missing check descriptions suppress double reporting of ** spacing report on do{ spacing issues include an example of the brace/parenthesis in output check for spacing after closing braces prevent double reports on pointer spacing issues handle blank continuation lines on macros classify all reports error, warning, or check revamp hanging { checks and apply in context no spaces after the last ; in a for is ok check __setup has a corresponding addition to documentation David Woodhouse (1): limit character set used in patches and descriptions to UTF-8 Signed-off-by:Andy Whitcroft <apw@shadowen.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Nitin Gupta authored
This is a correction for a macro which gives worst case compressed data size by LZO1X. This patch was provided by the LZO author (Markus Oberhumer). Signed-off-by:
Nitin Gupta <nitingupta910@gmail.com> Cc: "Markus F.X.J. Oberhumer" <markus@oberhumer.com> Cc: "Richard Purdie" <rpurdie@openedhand.com> Signed-off-by:
-
Nelson, Shannon authored
Add entries to MAINTAINERS for I/OAT and DMAENGINE Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Cc: Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Jan Kara authored
We have to check that also the second checkpoint list is non-empty before dropping the transaction. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by:
-
Jan Kara authored
We have to check that also the second checkpoint list is non-empty before dropping the transaction. Signed-off-by:
-
Andrew Morton authored
Recent breakage.. net/sunrpc/auth_gss/auth_gss.c:1002: warning: implicit declaration of function 'lock_kernel' net/sunrpc/auth_gss/auth_gss.c:1004: warning: implicit declaration of function 'unlock_kernel' Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
- 15 Jul, 2007 2 commits
-
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: git-battery vs git-acpi Power supply class and drivers: remove non obligatory return statements pda_power: clean up irq, timer MAINTAINERS: Add maintainers for power supply subsystem and drivers Fixed up trivial conflict in drivers/w1/slaves/w1_ds2760.c manually
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits) [SCSI] ibmvscsi: convert to use the data buffer accessors [SCSI] dc395x: convert to use the data buffer accessors [SCSI] ncr53c8xx: convert to use the data buffer accessors [SCSI] sym53c8xx: convert to use the data buffer accessors [SCSI] ppa: coding police and printk levels [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c [SCSI] remove the dead CYBERSTORMIII_SCSI option [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA [SCSI] Clean up scsi_add_lun a bit [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs [SCSI] sni_53c710: Cleanup [SCSI] qla4xxx: Fix underrun/overrun conditions [SCSI] megaraid_mbox: use mutex instead of semaphore [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation. [SCSI] qla2xxx: update version to 8.02.00-k1. [SCSI] qla2xxx: add support for NPIV [SCSI] stex: use resid for xfer len information [SCSI] Add Brownie 1200U3P to blacklist [SCSI] scsi.c: convert to use the data buffer accessors ...
-
