- 17 Feb, 2016 35 commits
-
-
Takashi Iwai authored
commit 462b3f16 upstream. Some architectures like PowerPC can handle the maximum struct size in an ioctl only up to 13 bits, and struct snd_compr_codec_caps used by SNDRV_COMPRESS_GET_CODEC_CAPS ioctl overflows this limit. This problem was revealed recently by a powerpc change, as it's now treated as a fatal build error. This patch is a stop-gap for that: for architectures with less than 14 bit ioctl struct size, get rid of the handling of the relevant ioctl. We should provide an alternative equivalent ioctl code later, but for now just paper over it. Luckily, the compress API hasn't been used on such architectures, so the impact must be effectively zero. Reviewed-by:
Mark Brown <broonie@kernel.org> Acked-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Konovalov authored
commit 07d86ca9 upstream. The 'umidi' object will be free'd on the error path by snd_usbmidi_free() when tearing down the rawmidi interface. So we shouldn't try to free it in snd_usbmidi_create() after having registered the rawmidi interface. Found by KASAN. Signed-off-by:
Andrey Konovalov <andreyknvl@gmail.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Guillaume Fougnies authored
commit 5a4ff9ec upstream. TEAC UD-501/UD-503/NT-503 fail to switch properly between different rate/format. Similar to 'Playback Design', this patch corrects the invalid clock source error for TEAC products and avoids complete freeze of the usb interface of 503 series. Signed-off-by:
Guillaume Fougnies <guillaume@eulerian.com> Signed-off-by:
-
Al Viro authored
commit 0ebf7f10 upstream. The thing got broken back in 2002 - sysvfs does *not* have inline symlinks; even short ones have bodies stored in the first block of file. sysv_symlink() handles that correctly; unfortunately, attempting to look an existing symlink up will end up confusing them for inline symlinks, and interpret the block number containing the body as the body itself. Nobody has noticed until now, which says something about the level of testing sysvfs gets ;-/ Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Tiffany Lin authored
commit d9a98588 upstream. In videobuf2 dma-contig memory type the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: 199d101e ("v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator") Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Andrzej Hajda authored
commit 655e9780 upstream. Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match compatible ioctls on ARM64 kernels without breaking AMD64 some fields should be aligned using compat_s64 type and in one case struct should be unpacked. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> [hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Helge Deller authored
commit e60fc5aa upstream. On a 64bit kernel build the compiler aligns the _sifields union in the struct siginfo_t on a 64bit address. The __ARCH_SI_PREAMBLE_SIZE define compensates for this alignment and thus fixes the wait testcase of the strace package. The symptoms of a wrong __ARCH_SI_PREAMBLE_SIZE value is that _sigchld.si_stime variable is missed to be copied and thus after a copy_siginfo() will have uninitialized values. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit 71a71fb5 upstream. On parisc syscalls which are interrupted by signals sometimes failed to restart and instead returned -ENOSYS which in the worst case lead to userspace crashes. A similiar problem existed on MIPS and was fixed by commit e967ef02 ("MIPS: Fix restart of indirect syscalls"). On parisc the current syscall restart code assumes that all syscall callers load the syscall number in the delay slot of the ble instruction. That's how it is e.g. done in the unistd.h header file: ble 0x100(%sr2, %r0) ldi #syscall_nr, %r20 Because of that assumption the current code never restored %r20 before returning to userspace. This assumption is at least not true for code which uses the glibc syscall() function, which instead uses this syntax: ble 0x100(%sr2, %r0) copy regX, %r20 where regX depend on how the compiler optimizes the code and register usage. This patch fixes this problem by adding code to analyze how the syscall number is loaded in the delay branch and - if needed - copy the syscall number to regX prior returning to userspace for the syscall restart. Signed-off-by:
-
Helge Deller authored
commit dcbf0d29 upstream. Drop the MADV_xxK_PAGES flags, which were never used and were from a proposed API which was never integrated into the generic Linux kernel code. Signed-off-by:
-
Andy Leiserson authored
commit 904dad47 upstream. "group" is the group where the backup will be placed, and is initialized to zero in the declaration. This meant that backups for meta_bg descriptors were erroneously written to the backup block group descriptors in groups 1 and (desc_per_block-1). Reproduction information: mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G truncate -s 24G /tmp/foo.img losetup /dev/loop0 /tmp/foo.img mount /dev/loop0 /mnt resize2fs /dev/loop0 umount /dev/loop0 dd if=/dev/zero of=/dev/loop0 bs=1024 count=2 e2fsck -fy /dev/loop0 losetup -d /dev/loop0 Signed-off-by:
Andy Leiserson <andy@leiserson.org> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit bc23f0c8 upstream. Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by:
Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b7941Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Qiu Peiyang authored
commit f36d1be2 upstream. When we do cat /sys/kernel/debug/tracing/printk_formats, we hit kernel panic at t_show. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 2957 Comm: sh Tainted: G W O 3.14.55-x86_64-01062-gd4acdc7 #2 RIP: 0010:[<ffffffff811375b2>] [<ffffffff811375b2>] t_show+0x22/0xe0 RSP: 0000:ffff88002b4ebe80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000004 RSI: ffffffff81fd26a6 RDI: ffff880032f9f7b1 RBP: ffff88002b4ebe98 R08: 0000000000001000 R09: 000000000000ffec R10: 0000000000000000 R11: 000000000000000f R12: ffff880004d9b6c0 R13: 7365725f6d706400 R14: ffff880004d9b6c0 R15: ffffffff82020570 FS: 0000000000000000(0000) GS:ffff88003aa00000(0063) knlGS:00000000f776bc40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000f6c02ff0 CR3: 000000002c2b3000 CR4: 00000000001007f0 Call Trace: [<ffffffff811dc076>] seq_read+0x2f6/0x3e0 [<ffffffff811b749b>] vfs_read+0x9b/0x160 [<ffffffff811b7f69>] SyS_read+0x49/0xb0 [<ffffffff81a3a4b9>] ia32_do_call+0x13/0x13 ---[ end trace 5bd9eb630614861e ]--- Kernel panic - not syncing: Fatal exception When the first time find_next calls find_next_mod_format, it should iterate the trace_bprintk_fmt_list to find the first print format of the module. However in current code, start_index is smaller than *pos at first, and code will not iterate the list. Latter container_of will get the wrong address with former v, which will cause mod_fmt be a meaningless object and so is the returned mod_fmt->fmt. This patch will fix it by correcting the start_index. After fixed, when the first time calls find_next_mod_format, start_index will be equal to *pos, and code will iterate the trace_bprintk_fmt_list to get the right module printk format, so is the returned mod_fmt->fmt. Link: http://lkml.kernel.org/r/5684B900.9000309@intel.com Fixes: 102c9323 "tracing: Add __tracepoint_string() to export string pointers" Signed-off-by:
Qiu Peiyang <peiyangx.qiu@intel.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Christoph Biedl authored
commit 3460baa6 upstream. Commit 36e097a8 ("PCI: Split out bridge window override of minimum allocation address") claimed to do no functional changes but unfortunately did: The "min" variable is altered. At least the AVM A1 PCMCIA adapter was no longer detected, breaking ISDN operation. Use a local copy of "min" to restore the previous behaviour. [bhelgaas: avoid gcc "?:" extension for portability and readability] Fixes: 36e097a8 ("PCI: Split out bridge window override of minimum allocation address") Signed-off-by:
Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Boris BREZILLON authored
commit e5bae867 upstream. If we fail to allocate a partition structure in the middle of the partition creation process, the already allocated partitions are never removed, which means they are still present in the partition list and their resources are never freed. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Hon Ching \(Vicky\) Lo authored
commit 60ecd86c upstream. At ibm vtpm initialzation, tpm_ibmvtpm_probe() registers its interrupt handler, ibmvtpm_interrupt, which calls ibmvtpm_crq_process to allocate memory for rtce buffer. The current code uses 'GFP_KERNEL' as the type of kernel memory allocation, which resulted a warning at kernel/lockdep.c. This patch uses 'GFP_ATOMIC' instead so that the allocation is high-priority and does not sleep. Signed-off-by:
Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Uri Mashiach authored
commit e47301b0 upstream. Fix the below Oops when trying to modprobe wlcore_spi. The oops occurs because the wl1271_power_{off,on}() function doesn't check the power() function pointer. [ 23.401447] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 23.409954] pgd = c0004000 [ 23.412922] [00000000] *pgd=00000000 [ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM [ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211 musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23 c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon [ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted 4.2.0-00002-g951efee-dirty #233 [ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree) [ 23.468123] Workqueue: events request_firmware_work_func [ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000 [ 23.479341] PC is at 0x0 [ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore] [ 23.488074] pc : [<00000000>] lr : [<bf2581f0>] psr: 60000013 [ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000 [ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00 [ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 : dce0d2e0 [ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : dc848810 [ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015 [ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218) [ 23.539760] Stack: (0xde4efe50 to 0xde4f0000) [...] [ 23.665030] [<bf2581f0>] (wl12xx_set_power_on [wlcore]) from [<bf25f7ac>] (wlcore_nvs_cb+0x118/0xa4c [wlcore]) [ 23.675604] [<bf25f7ac>] (wlcore_nvs_cb [wlcore]) from [<c04387ec>] (request_firmware_work_func+0x30/0x58) [ 23.685784] [<c04387ec>] (request_firmware_work_func) from [<c0058e2c>] (process_one_work+0x1b4/0x4b4) [ 23.695591] [<c0058e2c>] (process_one_work) from [<c0059168>] (worker_thread+0x3c/0x4a4) [ 23.704124] [<c0059168>] (worker_thread) from [<c005ee68>] (kthread+0xd4/0xf0) [ 23.711747] [<c005ee68>] (kthread) from [<c000f598>] (ret_from_fork+0x14/0x3c) [ 23.719357] Code: bad PC value [ 23.722760] ---[ end trace 981be8510db9b3a9 ]--- Prevent oops by validationg power() pointer value before calling the function. Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Uri Mashiach authored
commit 9b2761cb upstream. The maximum chunks used by the function is (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1). The original commands array had space for (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands. When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last command is stored outside the bounds of the commands array. Oops 5 (page fault) is generated during current wl1271 firmware load attempt: root@debian-armhf:~# ifconfig wlan0 up [ 294.312399] Unable to handle kernel paging request at virtual address 00203fc4 [ 294.320173] pgd = de528000 [ 294.323028] [00203fc4] *pgd=00000000 [ 294.326916] Internal error: Oops: 5 [#1] SMP ARM [ 294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys hwmon [ 294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted 4.2.0-00002-g3e9ad27-dirty #78 [ 294.360154] Hardware name: Generic AM33XX (Flattened Device Tree) [ 294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000 [ 294.372236] PC is at __spi_validate+0xa8/0x2ac [ 294.376902] LR is at __spi_sync+0x78/0x210 [ 294.381200] pc : [<c049c760>] lr : [<c049ebe0>] psr: 60000013 [ 294.381200] sp : de551998 ip : de5519d8 fp : 00200000 [ 294.393242] r10: de551c8c r9 : de5519d8 r8 : de3a9000 [ 294.398730] r7 : de3a9258 r6 : de3a9400 r5 : de551a48 r4 : 00203fbc [ 294.405577] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : de3a9000 [ 294.412420] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 294.419918] Control: 10c5387d Table: 9e528019 DAC: 00000015 [ 294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218) [ 294.432437] Stack: (0xde551998 to 0xde552000) ... [ 294.883613] [<c049c760>] (__spi_validate) from [<c049ebe0>] (__spi_sync+0x78/0x210) [ 294.891670] [<c049ebe0>] (__spi_sync) from [<bf036598>] (wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi]) [ 294.901661] [<bf036598>] (wl12xx_spi_raw_write [wlcore_spi]) from [<bf21c694>] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore]) [ 294.914038] [<bf21c694>] (wlcore_boot_upload_firmware [wlcore]) from [<bf24532c>] (wl12xx_boot+0xc10/0xfac [wl12xx]) [ 294.925161] [<bf24532c>] (wl12xx_boot [wl12xx]) from [<bf20d5cc>] (wl1271_op_add_interface+0x5b0/0x910 [wlcore]) [ 294.936364] [<bf20d5cc>] (wl1271_op_add_interface [wlcore]) from [<bf15c4ac>] (ieee80211_do_open+0x44c/0xf7c [mac80211]) [ 294.947963] [<bf15c4ac>] (ieee80211_do_open [mac80211]) from [<c0537978>] (__dev_open+0xa8/0x110) [ 294.957307] [<c0537978>] (__dev_open) from [<c0537bf8>] (__dev_change_flags+0x88/0x148) [ 294.965713] [<c0537bf8>] (__dev_change_flags) from [<c0537cd0>] (dev_change_flags+0x18/0x48) [ 294.974576] [<c0537cd0>] (dev_change_flags) from [<c05a55a0>] (devinet_ioctl+0x6b4/0x7d0) [ 294.983191] [<c05a55a0>] (devinet_ioctl) from [<c0517040>] (sock_ioctl+0x1e4/0x2bc) [ 294.991244] [<c0517040>] (sock_ioctl) from [<c017d378>] (do_vfs_ioctl+0x420/0x6b0) [ 294.999208] [<c017d378>] (do_vfs_ioctl) from [<c017d674>] (SyS_ioctl+0x6c/0x7c) [ 295.006880] [<c017d674>] (SyS_ioctl) from [<c000f4c0>] (ret_fast_syscall+0x0/0x54) [ 295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008) [ 295.021544] ---[ end trace 66ed188198f4e24e ]--- Signed-off-by:
-
Johan Hovold authored
commit 157f38f9 upstream. Fix parent-device reference leak due to SPI-core taking an unnecessary reference to the parent when allocating the master structure, a reference that was never released. Note that driver core takes its own reference to the parent when the master device is registered. Fixes: 49dce689 ("spi doesn't need class_device") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Vignesh R authored
commit bc27a539 upstream. Writing invalid command to QSPI_SPI_CMD_REG will terminate current transfer and de-assert the chip select. This has to be done before calling spi_finalize_current_message(). Because spi_finalize_current_message() will mark the end of current message transfer and schedule the next transfer. If the chipselect is not de-asserted before calling spi_finalize_current_message() then the next transfer will overlap with the previous transfer leading to data corruption. __spi_pump_message() can be called either from kthread worker context or directly from the calling process's context. It is possible that these two calls can race against each other. But race is serialized by checking whether master->cur_msg == NULL (pointer to msg being handled by transfer_one() at present). The master->cur_msg is set to NULL when spi_finalize_current_message() is called on that message, which means calling spi_finalize_current_message() allows __spi_sync() to pump next message in calling process context. Now if spi-ti-qspi calls spi_finalize_current_message() before we terminate transfer at hardware side, if __spi_pump_message() is called from process context then the successive transactions can overlap. Fix this by moving writing invalid command to QSPI_SPI_CMD_REG to before calling spi_finalize_current_message() call. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
David Mosberger-Tang authored
commit 06515f83 upstream. The DMA-slave configuration depends on the whether <= 8 or > 8 bits are transferred per word, so we need to call atmel_spi_dma_slave_config() with the correct value. Signed-off-by:
David Mosberger <davidm@egauge.net> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
commit 47796938 upstream. This reverts commit a1989b33. That commit introduced a regression at least for the case of the SG_IO ioctl() running without CAP_SYS_RAWIO capability (e.g., unprivileged users) when there are no active paths: the ioctl() fails with the ENOTTY errno immediately rather than blocking due to queue_if_no_path until a path becomes active, for example. That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices (qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]) from multipath devices; which leads to SCSI/filesystem errors in such a guest. More general scenarios can hit that regression too. The following demonstration employs a SG_IO ioctl() with a standard SCSI INQUIRY command for this objective (some output & user changes omitted for brevity and comments added for clarity). Reverting that commit restores normal operation (queueing) in failing scenarios; tested on linux-next (next-20151022). 1) Test-case is based on sg_simple0 [3] (just SG_IO; remove SG_GET_VERSION_NUM) $ cat sg_simple0.c ... see [3] ... $ sed '/SG_GET_VERSION_NUM/,/}/d' sg_simple0.c > sgio_inquiry.c $ gcc sgio_inquiry.c -o sgio_inquiry 2) The ioctl() works fine with active paths present. # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=active | |- 8:0:11:0 sdz 65:144 active undef running | `- 9:0:9:0 sdbf 67:144 active undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 active undef running `- 9:0:12:0 sdbo 68:32 active undef running $ ./sgio_inquiry /dev/mapper/85ag56 Some of the INQUIRY command's response: IBM 2145 0000 INQUIRY duration=0 millisecs, resid=0 3) The ioctl() fails with ENOTTY errno with _no_ active paths present, for unprivileged users (rather than blocking due to queue_if_no_path). # for path in $(multipath -l 85ag56 | grep -o 'sd[a-z]\+'); \ do multipathd -k"fail path $path"; done # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | |- 8:0:11:0 sdz 65:144 failed undef running | `- 9:0:9:0 sdbf 67:144 failed undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 failed undef running `- 9:0:12:0 sdbo 68:32 failed undef running $ ./sgio_inquiry /dev/mapper/85ag56 sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device 4) dmesg shows that scsi_verify_blk_ioctl() failed for SG_IO (0x2285); it returns -ENOIOCTLCMD, later replaced with -ENOTTY in vfs_ioctl(). $ dmesg <...> [] device-mapper: multipath: Failing path 65:144. [] device-mapper: multipath: Failing path 67:144. [] device-mapper: multipath: Failing path 65:224. [] device-mapper: multipath: Failing path 68:32. [] sgio_inquiry: sending ioctl 2285 to a partition! 5) The ioctl() only works if the SYS_CAP_RAWIO capability is present (then queueing happens -- in this example, queue_if_no_path is set); this is due to a conditional check in scsi_verify_blk_ioctl(). # capsh --drop=cap_sys_rawio -- -c './sgio_inquiry /dev/mapper/85ag56' sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device # ./sgio_inquiry /dev/mapper/85ag56 & [1] 72830 # cat /proc/72830/stack [<c00000171c0df700>] 0xc00000171c0df700 [<c000000000015934>] __switch_to+0x204/0x350 [<c000000000152d4c>] msleep+0x5c/0x80 [<c00000000077dfb0>] dm_blk_ioctl+0x70/0x170 [<c000000000487c40>] blkdev_ioctl+0x2b0/0x9b0 [<c0000000003128e4>] block_ioctl+0x64/0xd0 [<c0000000002dd3b0>] do_vfs_ioctl+0x490/0x780 [<c0000000002dd774>] SyS_ioctl+0xd4/0xf0 [<c000000000009358>] system_call+0x38/0xd0 6) This is the function call chain exercised in this analysis: SYSCALL_DEFINE3(ioctl, <...>) @ fs/ioctl.c -> do_vfs_ioctl() -> vfs_ioctl() ... error = filp->f_op->unlocked_ioctl(filp, cmd, arg); ... -> dm_blk_ioctl() @ drivers/md/dm.c -> multipath_ioctl() @ drivers/md/dm-mpath.c ... (bdev = NULL, due to no active paths) ... if (!bdev || <...>) { int err = scsi_verify_blk_ioctl(NULL, cmd); if (err) r = err; } ... -> scsi_verify_blk_ioctl() @ block/scsi_ioctl.c ... if (bd && bd == bd->bd_contains) // not taken (bd = NULL) return 0; ... if (capable(CAP_SYS_RAWIO)) // not taken (unprivileged user) return 0; ... printk_ratelimited(KERN_WARNING "%s: sending ioctl %x to a partition!\n" <...>); return -ENOIOCTLCMD; <- ... return r ? : <...> <- ... if (error == -ENOIOCTLCMD) error = -ENOTTY; out: return error; ... Links: [1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52 [2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device') [3] http://tldp.org/HOWTO/SCSI-Generic-HOWTO/pexample.html (Revision 1.2, 2002-05-03) Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Dmitry V. Levin authored
commit 2d33fa10 upstream. According to arch/sh/kernel/syscalls_64.S and common sense, __NR_fgetxattr has to be defined to 259, but it doesn't. Instead, it's defined to 269, which is of course used by another syscall, __NR_sched_setaffinity in this case. This bug was found by strace test suite. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
xuejiufei authored
commit c95a5180 upstream. When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by:
xuejiufei <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
xuejiufei authored
commit bef5502d upstream. We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by:
-
Junxiao Bi authored
commit 854ee2e9 upstream. Commit 8f1eb487 ("ocfs2: fix umask ignored issue") introduced an issue, SGID of sub dir was not inherited from its parents dir. It is because SGID is set into "inode->i_mode" in ocfs2_get_init_inode(), but is overwritten by "mode" which don't have SGID set later. Fixes: 8f1eb487 ("ocfs2: fix umask ignored issue") Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Acked-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by:
-
Richard Weinberger authored
commit 9d8a7652 upstream. sigsuspend() is nowhere used except in signal.c itself, so we can mark it static do not pollute the global namespace. But this patch is more than a boring cleanup patch, it fixes a real issue on UserModeLinux. UML has a special console driver to display ttys using xterm, or other terminal emulators, on the host side. Vegard reported that sometimes UML is unable to spawn a xterm and he's facing the following warning: WARNING: CPU: 0 PID: 908 at include/linux/thread_info.h:128 sigsuspend+0xab/0xc0() It turned out that this warning makes absolutely no sense as the UML xterm code calls sigsuspend() on the host side, at least it tries. But as the kernel itself offers a sigsuspend() symbol the linker choose this one instead of the glibc wrapper. Interestingly this code used to work since ever but always blocked signals on the wrong side. Some recent kernel change made the WARN_ON() trigger and uncovered the bug. It is a wonderful example of how much works by chance on computers. :-) Fixes: 68f3f16d ("new helper: sigsuspend()") Signed-off-by:
Richard Weinberger <richard@nod.at> Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Tested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
OGAWA Hirofumi authored
commit 928a4771 upstream. For the root directory, . and .. are faked (using dir_emit_dots()) and ctx->pos is reset from 2 to 0. A corrupted root directory could cause fat_get_entry() to fail, but ->iterate() (fat_readdir()) reports progress to the VFS (with ctx->pos rewound to 0), so any following calls to ->iterate() continue to return the same entries again and again. The result is that userspace will never see the end of the directory, causing e.g. 'ls' to hang in a getdents() loop. [hirofumi@mail.parknet.co.jp: cleanup and make sure to correct fake_offset] Reported-by:
Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Arnd Bergmann authored
commit 92792e48 upstream. Recent gcc versions warn about reading from a negative offset of an on-stack array: drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write': drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized] I don't see anything in sys_write() that prevents us from being called with a zero 'count' argument, so we should add an extra check in rproc_recovery_write() to prevent the access and avoid the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 2e37abb8 ("remoteproc: create a 'recovery' debugfs entry") Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Oleg Nesterov authored
commit 54708d28 upstream. The commit 96d0df79 ("proc: make proc_fd_permission() thread-friendly") fixed the access to /proc/self/fd from sub-threads, but introduced another problem: a sub-thread can't access /proc/<tid>/fd/ or /proc/thread-self/fd if generic_permission() fails. Change proc_fd_permission() to check same_thread_group(pid_task(), current). Fixes: 96d0df79 ("proc: make proc_fd_permission() thread-friendly") Reported-by:
"Jin, Yihua" <yihua.jin@intel.com> Signed-off-by:
-
Ioan-Adrian Ratiu authored
commit e470127e upstream. The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by:
Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
-
Seth Jennings authored
commit 26bbe7ef upstream. Commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems") and 982792c7 ("x86, mm: probe memory block size for generic x86 64bit") introduced large block sizes for x86. This made it possible to have multiple sections per memory block where previously, there was a only every one section per block. Since blocks consist of contiguous ranges of section, there can be holes in the blocks where sections are not present. If one attempts to offline such a block, a crash occurs since the code is not designed to deal with this. This patch is a quick fix to gaurd against the crash by not allowing blocks with non-present sections to be offlined. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=107781Signed-off-by:
Seth Jennings <sjennings@variantweb.net> Reported-by:
Andrew Banman <abanman@sgi.com> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Russ Anderson <rja@sgi.com> Signed-off-by:
-
Mike Snitzer authored
commit 30ce6e1c upstream. The block allocated at the start of btree_split_sibling() is never released if later insert_at() fails. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Herbert Xu authored
commit 4afa5f96 upstream. The hash_accept call fails to work on sockets that have not received any data. For some algorithm implementations it may cause crashes. This patch fixes this by ensuring that we only export and import on sockets that have received data. Reported-by:
Harsh Jain <harshjain.prof@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
libin authored
commit c84da8b9 upstream. In nop_mcount, shdr->sh_offset and welp->r_offset should handle endianness properly, otherwise it will trigger Segmentation fault if the recordmcount main and file.o have different endianness. Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.comSigned-off-by:
Li Bin <huawei.libin@huawei.com> Signed-off-by:
-
Greg Kroah-Hartman authored
In the backport of 1eaf35e4, the call to usb_disabled() was too late, after we had already done some allocation. Move that call to the top of the function instead, making the logic match what is intended and is in the original patch. Reported-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
- 29 Jan, 2016 5 commits
-
-
Greg Kroah-Hartman authored
-
Yang Shi authored
commit 92e788b7 upstream. As previously reported, some userspace applications depend on bogomips showed by /proc/cpuinfo. Although there is much less legacy impact on aarch64 than arm, it does break libvirt. This patch reverts commit 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo"), but with some tweak due to context change and without the pr_info(). Fixes: 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo") Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Guenter Roeck authored
commit c86576ea upstream. mn10300 builds fail with fs/stat.c: In function 'cp_old_stat': fs/stat.c:163:2: error: 'old_uid_t' undeclared ipc/util.c: In function 'ipc64_perm_to_ipc_perm': ipc/util.c:540:2: error: 'old_uid_t' undeclared Select CONFIG_HAVE_UID16 and remove local definition of CONFIG_UID16 to fix the problem. Fixes: fbc416ff ("arm64: fix building without CONFIG_UID16") Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Acked-by: David Howells <dhowells@redhat.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Andrew Morton authored
commit 04ea1e91 upstream. openrisc-allnoconfig: kernel/uid16.c: In function 'SYSC_setgroups16': kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc' kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n. Fixes: 2813893f ("kernel: conditionally support non-root users, groups and capabilities") Reported-by:
Fengguang Wu <fengguang.wu@gmail.com> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Richard Purdie authored
commit 79b568b9 upstream. hid_connect adds various strings to the buffer but they're all conditional. You can find circumstances where nothing would be written to it but the kernel will still print the supposedly empty buffer with printk. This leads to corruption on the console/in the logs. Ensure buf is initialized to an empty string. Signed-off-by:
Richard Purdie <richard.purdie@linuxfoundation.org> [dvhart: Initialize string to "" rather than assign buf[0] = NULL;] Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
