- 21 Sep, 2015 10 commits
-
-
Marek Marczykowski-Górecki authored
commit 30b03d05 upstream. While gntdev_release() is called the MMU notifier is still registered and can traverse priv->maps list even if no pages are mapped (which is the case -- gntdev_release() is called after all). But gntdev_release() will clear that list, so make sure that only one of those things happens at the same time. Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
David Vrabel authored
commit 1401c00e upstream. Unmapping may require sleeping and we unmap while holding priv->lock, so convert it to a mutex. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
Sasha Levin authored
commit 74e98eb0 upstream. There was no verification that an underlying transport exists when creating a connection, this would cause dereferencing a NULL ptr. It might happen on sockets that weren't properly bound before attempting to send a message, which will cause a NULL ptr deref: [135546.047719] kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN [135546.051270] Modules linked in: [135546.051781] CPU: 4 PID: 15650 Comm: trinity-c4 Not tainted 4.2.0-next-20150902-sasha-00041-gbaa1222-dirty #2527 [135546.053217] task: ffff8800835bc000 ti: ffff8800bc708000 task.ti: ffff8800bc708000 [135546.054291] RIP: __rds_conn_create (net/rds/connection.c:194) [135546.055666] RSP: 0018:ffff8800bc70fab0 EFLAGS: 00010202 [135546.056457] RAX: dffffc0000000000 RBX: 0000000000000f2c RCX: ffff8800835bc000 [135546.057494] RDX: 0000000000000007 RSI: ffff8800835bccd8 RDI: 0000000000000038 [135546.058530] RBP: ffff8800bc70fb18 R08: 0000000000000001 R09: 0000000000000000 [135546.059556] R10: ffffed014d7a3a23 R11: ffffed014d7a3a21 R12: 0000000000000000 [135546.060614] R13: 0000000000000001 R14: ffff8801ec3d0000 R15: 0000000000000000 [135546.061668] FS: 00007faad4ffb700(0000) GS:ffff880252000000(0000) knlGS:0000000000000000 [135546.062836] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [135546.063682] CR2: 000000000000846a CR3: 000000009d137000 CR4: 00000000000006a0 [135546.064723] Stack: [135546.065048] ffffffffafe2055c ffffffffafe23fc1 ffffed00493097bf ffff8801ec3d0008 [135546.066247] 0000000000000000 00000000000000d0 0000000000000000 ac194a24c0586342 [135546.067438] 1ffff100178e1f78 ffff880320581b00 ffff8800bc70fdd0 ffff880320581b00 [135546.068629] Call Trace: [135546.069028] ? __rds_conn_create (include/linux/rcupdate.h:856 net/rds/connection.c:134) [135546.069989] ? rds_message_copy_from_user (net/rds/message.c:298) [135546.071021] rds_conn_create_outgoing (net/rds/connection.c:278) [135546.071981] rds_sendmsg (net/rds/send.c:1058) [135546.072858] ? perf_trace_lock (include/trace/events/lock.h:38) [135546.073744] ? lockdep_init (kernel/locking/lockdep.c:3298) [135546.074577] ? rds_send_drop_to (net/rds/send.c:976) [135546.075508] ? __might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3795) [135546.076349] ? __might_fault (mm/memory.c:3795) [135546.077179] ? rds_send_drop_to (net/rds/send.c:976) [135546.078114] sock_sendmsg (net/socket.c:611 net/socket.c:620) [135546.078856] SYSC_sendto (net/socket.c:1657) [135546.079596] ? SYSC_connect (net/socket.c:1628) [135546.080510] ? trace_dump_stack (kernel/trace/trace.c:1926) [135546.081397] ? ring_buffer_unlock_commit (kernel/trace/ring_buffer.c:2479 kernel/trace/ring_buffer.c:2558 kernel/trace/ring_buffer.c:2674) [135546.082390] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749) [135546.083410] ? trace_event_raw_event_sys_enter (include/trace/events/syscalls.h:16) [135546.084481] ? do_audit_syscall_entry (include/trace/events/syscalls.h:16) [135546.085438] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749) [135546.085515] rds_ib_laddr_check(): addr 36.74.25.172 ret -99 node type -1 Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jason Wang authored
commit 48900cb6 upstream. virtio declares support for NETIF_F_FRAGLIST, but assumes that there are at most MAX_SKB_FRAGS + 2 fragments which isn't always true with a fraglist. A longer fraglist in the skb will make the call to skb_to_sgvec overflow the sg array, leading to memory corruption. Drop NETIF_F_FRAGLIST so we only get what we can handle. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Marcelo Leitner authored
commit 77751427 upstream. Currently we don't check if the new MTU is valid or not and this allows one to configure a smaller than minimum allowed by RFCs or even bigger than interface own MTU, which is a problem as it may lead to packet drops. If you have a daemon like NetworkManager running, this may be exploited by remote attackers by forging RA packets with an invalid MTU, possibly leading to a DoS. (NetworkManager currently only validates for values too small, but not for too big ones.) The fix is just to make sure the new value is valid. That is, between IPV6_MIN_MTU and interface's MTU. Note that similar check is already performed at ndisc_router_discovery(), for when kernel itself parses the RA. Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Alistair Popple authored
commit ad1ed2a9 upstream. If ipmi_powernv_recv(...) is called without a current message it prints a warning and returns. However it fails to release the message lock causing the system to dead lock during any subsequent IPMI operations. This error path should never normally be taken unless there are bugs elsewhere in the system. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
NeilBrown authored
commit ee5d004f upstream. The 'event_work' worker used by dm-raid may still be running when the array is stopped. This can result in an oops. So flush the workqueue on which it is run after detaching and before destroying the device. Reported-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.com> Fixes: 9d09e663 ("dm: raid456 basic support") [kamal: backport to 3.19-stable: context] Signed-off-by:
-
Juergen Gross authored
commit 4809146b upstream. Commit 37868fe1 ("x86/ldt: Make modify_ldt synchronous") introduced a new struct ldt_struct anchored at mm->context.ldt. Adapt the x86 fpu emulation code to use that new structure. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: billm@melbpc.org.au Link: http://lkml.kernel.org/r/1438883674-1240-1-git-send-email-jgross@suse.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Juergen Gross authored
commit 136d9d83 upstream. Commit 37868fe1 ("x86/ldt: Make modify_ldt synchronous") introduced a new struct ldt_struct anchored at mm->context.ldt. convert_ip_to_linear() was changed to reflect this, but indexing into the ldt has to be changed as the pointer is no longer void *. Signed-off-by:
-
Andy Lutomirski authored
commit 37868fe1 upstream. modify_ldt() has questionable locking and does not synchronize threads. Improve it: redesign the locking and synchronize all threads' LDTs using an IPI on all modifications. This will dramatically slow down modify_ldt in multithreaded programs, but there shouldn't be any multithreaded programs that care about modify_ldt's performance in the first place. This fixes some fallout from the CVE-2015-5157 fixes. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/4c6978476782160600471bd865b318db34c7b628.1438291540.git.luto@kernel.orgSigned-off-by:
-
- 08 Sep, 2015 1 commit
-
-
Kamal Mostafa authored
This reverts commit 3f99e272. Not suitable for 3.19-stable: 'struct dma_pl330_desc' has no member named 'bytes_requested' Signed-off-by:
-
- 02 Sep, 2015 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 28 Aug, 2015 28 commits
-
-
Julian Anastasov authored
commit 05f00505 upstream. I overlooked the svc->sched_data usage from schedulers when the services were converted to RCU in 3.10. Now the rare ipvsadm -E command can change the scheduler but due to the reverse order of ip_vs_bind_scheduler and ip_vs_unbind_scheduler we provide new sched_data to the old scheduler resulting in a crash. To fix it without changing the scheduler methods we have to use synchronize_rcu() only for the editing case. It means all svc->scheduler readers should expect a NULL value. To avoid breakage for the service listing and ipvsadm -R we can use the "none" name to indicate that scheduler is not assigned, a state when we drop new connections. Reported-by:
Alexander Vasiliev <a.vasylev@404-group.com> Fixes: ceec4c38 ("ipvs: convert services to rcu") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Lars Westerhoff authored
commit 158cd4af upstream. When binding a PF_PACKET socket, the use count of the bound interface is always increased with dev_hold in dev_get_by_{index,name}. However, when rebound with the same protocol and device as in the previous bind the use count of the interface was not decreased. Ultimately, this caused the deletion of the interface to fail with the following message: unregister_netdevice: waiting for dummy0 to become free. Usage count = 1 This patch moves the dev_put out of the conditional part that was only executed when either the protocol or device changed on a bind. Fixes: 902fefb8 ('packet: improve socket create/bind latency in some cases') Signed-off-by:
Lars Westerhoff <lars.westerhoff@newtec.eu> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Jack Morgenstein authored
commit 1c1bf349 upstream. The port-change event processing in procedure mlx4_eq_int() uses "slave" as the vf_oper array index. Since the value of "slave" is the PF function index, the result is that the PF link state is used for deciding to propagate the event for all the VFs. The VF link state should be used, so the VF function index should be used here. Fixes: 948e306d ('net/mlx4: Add VF link state support') Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Daniel Borkmann authored
commit 28e6b67f upstream. Since commit 55334a5d ("net_sched: act: refuse to remove bound action outside"), we end up with a wrong reference count for a tc action. Test case 1: FOO="1,6 0 0 4294967295," BAR="1,6 0 0 4294967294," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 \ action bpf bytecode "$FOO" tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 1 bind 1 tc actions replace action bpf bytecode "$BAR" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 1 ref 2 bind 1 tc actions replace action bpf bytecode "$FOO" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 3 bind 1 Test case 2: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 2 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 3 bind 1 What happens is that in tcf_hash_check(), we check tcf_common for a given index and increase tcfc_refcnt and conditionally tcfc_bindcnt when we've found an existing action. Now there are the following cases: 1) We do a late binding of an action. In that case, we leave the tcfc_refcnt/tcfc_bindcnt increased and are done with the ->init() handler. This is correctly handeled. 2) We replace the given action, or we try to add one without replacing and find out that the action at a specific index already exists (thus, we go out with error in that case). In case of 2), we have to undo the reference count increase from tcf_hash_check() in the tcf_hash_check() function. Currently, we fail to do so because of the 'tcfc_bindcnt > 0' check which bails out early with an -EPERM error. Now, while commit 55334a5d prevents 'tc actions del action ...' on an already classifier-bound action to drop the reference count (which could then become negative, wrap around etc), this restriction only accounts for invocations outside a specific action's ->init() handler. One possible solution would be to add a flag thus we possibly trigger the -EPERM ony in situations where it is indeed relevant. After the patch, above test cases have correct reference count again. Fixes: 55334a5d ("net_sched: act: refuse to remove bound action outside") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Jiri Pirko authored
commit 42288830 upstream. Fixes: a3138df9 ("[NIU]: Add Sun Neptune ethernet driver.") Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Dan Carpenter authored
commit 44008f08 upstream. Smatch complains that we have nested checks for "spdif_present". It turns out the current behavior isn't correct, we should remove the first check and keep the second. Fixes: 1077a024 ('ALSA: hda - Use generic parser for Cirrus codec driver') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Julian Anastasov authored
commit 4754957f upstream. Michael Vallaly reports about wrong source address used in rare cases for tunneled traffic. Looks like __ip_vs_get_out_rt in 3.10+ is providing uninitialized dest_dst->dst_saddr.ip because ip_vs_dest_dst_alloc uses kmalloc. While we retry after seeing EINVAL from routing for data that does not look like valid local address, it still succeeded when this memory was previously used from other dests and with different local addresses. As result, we can use valid local address that is not suitable for our real server. Fix it by providing 0.0.0.0 every time our cache is refreshed. By this way we will get preferred source address from routing. Reported-by:
Michael Vallaly <lvs@nolatency.com> Fixes: 026ace06 ("ipvs: optimize dst usage for real server") Signed-off-by:
-
Joe Stringer authored
commit 4b31814d upstream. When zones were originally introduced, the expectation functions were all extended to perform lookup using the zone. However, insertion was not modified to check the zone. This means that two expectations which are intended to apply for different connections that have the same tuple but exist in different zones cannot both be tracked. Fixes: 5d0aa2cc (netfilter: nf_conntrack: add support for "conntrack zones") Signed-off-by:
Joe Stringer <joestringer@nicira.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
WANG Cong authored
commit 5175f710 upstream. When we share an action within a filter, the bind refcnt should increase, therefore we should not call tcf_hash_release(). Fixes: 1a29321e ("net_sched: act: Dont increment refcnt on replace") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Julian Anastasov authored
commit 56184858 upstream. Fix crash in 3.5+ if FTP is used after switching sync_version to 0. Fixes: 749c42b6 ("ipvs: reduce sync rate with time thresholds") Signed-off-by:
-
Andy Shevchenko authored
commit 5c02a420 upstream. Since NULL is used as valid clock object on optional clocks we have to handle this case in avr32 implementation as well. Fixes: e1824dfe (net: macb: Adjust tx_clk when link speed changes) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Alex Gartrell authored
commit 71563f34 upstream. It is possible that we bind against a local socket in early_demux when we are actually going to want to forward it. In this case, the socket serves no purpose and only serves to confuse things (particularly functions which implicitly expect sk_fullsock to be true, like ip_local_out). Additionally, skb_set_owner_w is totally broken for non full-socks. Signed-off-by:
Alex Gartrell <agartrell@fb.com> Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Acked-by:
-
Nikolay Aleksandrov authored
commit 7ae90a4f upstream. Since mdb states were introduced when deleting an entry the state was left as it was set in the delete request from the user which leads to the following output when doing a monitor (for example): $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 temp ^^^ Note the "temp" state in the delete notification which is wrong since the entry was permanent, the state in a delete is always reported as "temp" regardless of the real state of the entry. After this patch: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent There's one important note to make here that the state is actually not matched when doing a delete, so one can delete a permanent entry by stating "temp" in the end of the command, I've chosen this fix in order not to break user-space tools which rely on this (incorrect) behaviour. So to give an example after this patch and using the wrong state: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 temp (monitor) dev br0 port eth3 grp 239.0.0.1 permanent Note the state of the entry that got deleted is correct in the notification. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by:
-
Trond Myklebust authored
commit 85a23cee upstream. If we've ensured that the size and the change attribute are both correct, then there is no point in marking those attributes as needing revalidation again. Only do so if we know the size is incorrect and was not updated. Fixes: f2467b6f ("NFS: Clear NFS_INO_REVAL_PAGECACHE when...") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 95dd8653 upstream. We have to put back the references to the master conntrack and the expectation that we just created, otherwise we'll leak them. Fixes: 0ef71ee1 ("netfilter: ctnetlink: refactor ctnetlink_create_expect") Reported-by:
Tim Wiess <Tim.Wiess@watchguard.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 963ad948 upstream. Since slave_changelink support was added there have been a few race conditions when using br_setport() since some of the port functions it uses require the bridge lock. It is very easy to trigger a lockup due to some internal spin_lock() usage without bh disabled, also it's possible to get the bridge into an inconsistent state. Signed-off-by:
-
Florian Westphal authored
commit d1fe1944 upstream. commit 65ba1f1e ("inet: frags: fix a race between inet_evict_bucket and inet_frag_kill") describes the bug, but the fix doesn't work reliably. Problem is that ->flags member can be set on other cpu without chainlock being held by that task, i.e. the RMW-Cycle can clear INET_FRAG_EVICTED bit after we put the element on the evictor private list. We can crash when walking the 'private' evictor list since an element can be deleted from list underneath the evictor. Join work with Nikolay Alexandrov. Fixes: b13d3cbf ("inet: frag: move eviction of queues to work queue") Reported-by:
Johan Schuijt <johan@transip.nl> Tested-by:
Frank Schreuder <fschreuder@transip.nl> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Alexander Drozdov authored
commit dbd46ab4 upstream. tpacket_fill_skb() can return a negative value (-errno) which is stored in tp_len variable. In that case the following condition will be (but shouldn't be) true: tp_len > dev->mtu + dev->hard_header_len as dev->mtu and dev->hard_header_len are both unsigned. That may lead to just returning an incorrect EMSGSIZE errno to the user. Fixes: 52f1454f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case") Signed-off-by:
Alexander Drozdov <al.drozdov@gmail.com> Acked-by:
-
Andy Lutomirski authored
commit aa1acff3 upstream. The update_va_mapping hypercall can fail if the VA isn't present in the guest's page tables. Under certain loads, this can result in an OOPS when the target address is in unpopulated vmap space. While we're at it, add comments to help explain what's going on. This isn't a great long-term fix. This code should probably be changed to use something like set_memory_ro. Signed-off-by:
-
Takashi Iwai authored
commit 649ccd08 upstream. MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this seems not working correctly, a fix for pin NID 0x15 is needed in addition. It's equivalent with the fixup for MacBook Air 1,1, so use this instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102131Reported-and-tested-by:
Jeffery Miller <jefferym@gmail.com> Signed-off-by:
-
Tony Battersby authored
commit 0c958ecc upstream. Fix a memory leak with scsi-mq triggered by commands with large data transfer length. __sg_alloc_table() sets both table->nents and table->orig_nents to the same value. When the scatterlist is DMA-mapped, table->nents is overwritten with the (possibly smaller) size of the DMA-mapped scatterlist, while table->orig_nents retains the original size of the allocated scatterlist. scsi_free_sgtable() should therefore check orig_nents instead of nents, and all code that initializes sdb->table without calling __sg_alloc_table() should set both nents and orig_nents. Fixes: d285203c ("scsi: add support for a blk-mq based I/O path.") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Brian King authored
commit 3f1c0581 upstream. Fixes another signed / unsigned array indexing bug in the ipr driver. Currently, when hrrq_index wraps, it becomes a negative number. We do the modulo, but still have a negative number, so we end up indexing backwards in the array. Given where the hrrq array is located in memory, we probably won't actually reference memory we don't own, but nonetheless ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as struct ipr_hrr_queue data, so bad things could certainly happen. Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new adapters. Let's take an example: Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4: The atomic_add_return will then return -1. We mod this with 3 and get -2, add one and get -1 for an array index. On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter initialization and error interrupts so that we can optimize the other queues for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the I/O requests across those HRRQs. With the default module parameter settings, this bug won't hit, only when someone sets the ipr.number_of_msix parameter to a value larger than 3 is when bad things start to happen. Tested-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Brian King authored
commit bb7c5433 upstream. When ipr's internal driver trace was changed to an atomic, a signed/unsigned bug slipped in which results in us indexing backwards in our memory buffer writing on memory that does not belong to us. This patch fixes this by removing the modulo and instead just mask off the low bits. Tested-by:
-
Brian King authored
commit 36b8e180 upstream. Make sure we have the host lock held when calling scsi_report_bus_reset. Fixes a crash seen as the __devices list in the scsi host was changing as we were iterating through it. Reviewed-by:
-
Ricardo Neri authored
commit 9115c758 upstream. Even though it is documented how to specifiy efi parameters, it is possible to cause a kernel panic due to a dereference of a NULL pointer when parsing such parameters if "efi" alone is given: PANIC: early exception 0e rip 10:ffffffff812fb361 error 0 cr2 0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc1+ #450 [ 0.000000] ffffffff81fe20a9 ffffffff81e03d50 ffffffff8184bb0f 00000000000003f8 [ 0.000000] 0000000000000000 ffffffff81e03e08 ffffffff81f371a1 64656c62616e6520 [ 0.000000] 0000000000000069 000000000000005f 0000000000000000 0000000000000000 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8184bb0f>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff81f371a1>] early_idt_handler_common+0x81/0xae [ 0.000000] [<ffffffff812fb361>] ? parse_option_str+0x11/0x90 [ 0.000000] [<ffffffff81f4dd69>] arch_parse_efi_cmdline+0x15/0x42 [ 0.000000] [<ffffffff81f376e1>] do_early_param+0x50/0x8a [ 0.000000] [<ffffffff8106b1b3>] parse_args+0x1e3/0x400 [ 0.000000] [<ffffffff81f37a43>] parse_early_options+0x24/0x28 [ 0.000000] [<ffffffff81f37691>] ? loglevel+0x31/0x31 [ 0.000000] [<ffffffff81f37a78>] parse_early_param+0x31/0x3d [ 0.000000] [<ffffffff81f3ae98>] setup_arch+0x2de/0xc08 [ 0.000000] [<ffffffff8109629a>] ? vprintk_default+0x1a/0x20 [ 0.000000] [<ffffffff81f37b20>] start_kernel+0x90/0x423 [ 0.000000] [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef [ 0.000000] RIP 0xffffffff81ba2efc This panic is not reproducible with "efi=" as this will result in a non-NULL zero-length string. Thus, verify that the pointer to the parameter string is not NULL. This is consistent with other parameter-parsing functions which check for NULL pointers. Signed-off-by:
Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Dmitry Skorodumov authored
commit 7cc03e48 upstream. The efi_info structure stores low 32 bits of memory map in efi_memmap and high 32 bits in efi_memmap_hi. While constructing pointer in the setup_e820(), need to take into account all 64 bit of the pointer. It is because on 64bit machine the function efi_get_memory_map() may return full 64bit pointer and before the patch that pointer was truncated. The issue is triggered on Parallles virtual machine and fixed with this patch. Signed-off-by:
Dmitry Skorodumov <sdmitry@parallels.com> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Chris Wilson authored
commit 5eb3e5a5 upstream. The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle. Note that this is a new attempt for the previously merged one, reverted in commit d82c0ba6 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 14 12:29:27 2015 +0200 Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations" This is cc: stable since we need it to fix up troubles with wc cpu mmaps that userspace recently started to use widely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Add note about previous (failed attempt).] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Alex Deucher authored
commit 0a90a0cf upstream. Fixes a broken hsync start value uncovered by: abc0b144 (drm: Perform basic sanity checks on probed modes) The driver handled the bad hsync start elsewhere, but the above commit prevented it from getting added. bug: https://bugs.freedesktop.org/show_bug.cgi?id=91401Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
