- 21 Mar, 2018 16 commits
-
-
Hugues Fruchet authored
Fix unnecessary parentheses in if conditions. Detected by checkpatch.pl --strict. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hugues Fruchet authored
Do not stop/restart dma on overrun or errors. Dma will be restarted on current frame transfer completion. Frame transfer completion is ensured even if overrun or error occurs by DCMI continuous capture mode which restarts data transfer at next frame sync. Do no warn on overrun while in irq thread, this slows down system and lead to more overrun errors. Use a counter instead and log errors at stop streaming. Signed-off-by:
-
Hugues Fruchet authored
Fix lock scheme leading to spurious freeze. Signed-off-by:
-
Sakari Ailus authored
v4l2_find_nearest_format is not useful for drivers in finding the best matching format as it assumes a V4L2 specific struct. Drivers will use v4l2_find_nearest_size instead. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by:
-
Sakari Ailus authored
Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by:
-
Sakari Ailus authored
Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by:
-
Sakari Ailus authored
Add a function (as well as a helper macro) to obtain the best size in a list of device specific sizes. This helps writing drivers as well as aligns interface behaviour across drivers. The struct in which this information is contained in is typically specific to the driver, therefore the existing function v4l2_find_nearest_format() does not address the need. Signed-off-by:
-
Sean Young authored
This renames the protocol for the imon rc driver from other to imon, since it is now an known protocol. Although different name will show up in the sysfs protocol file, loading a keymap using existing ir-keytable versions still works. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
This makes it possible to use the various iMON remotes with any raw IR RC device. Signed-off-by:
-
Sean Young authored
If there is IR in the raw kfifo when ir_raw_event_unregister() is called, then kthread_stop() causes ir_raw_event_thread to be scheduled, decode some scancodes and re-arm timer_keyup. The timer_keyup then fires when the rc device is long gone. Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Young authored
These devices were supported by the lirc_imon.c driver which was removed from staging in commit f41003a2 ("[media] staging: lirc_imon: port remaining usb ids to imon and remove"). Signed-off-by:
-
Sean Young authored
Note that the stick on the remote is not supported yet. Signed-off-by:
-
Sean Young authored
This code was ported without the necessary hardware to test. There are multiple problems which are more easily solved by writing a separate driver. This reverts commit f41003a2. Signed-off-by:
-
Philipp Rossak authored
This patch updates documentation for Device-Tree bindings for sunxi IR controller and adds the new optional property for the base clock frequency. Signed-off-by:
Philipp Rossak <embed3d@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Philipp Rossak authored
This patch updates the sunxi-ir driver to set the base clock frequency from devicetree. This is necessary since there are different ir receivers on the market, that operate with different frequencies. So this value could be set if the attached ir receiver needs a different base clock frequency, than the default 8 MHz. Signed-off-by:
Andi Shyti <andi.shyti@samsung.com> Signed-off-by:
-
- 08 Mar, 2018 9 commits
-
-
Dan Carpenter authored
There is a double sizeof() typo here so we don't duplicate the struct properly. Fixes: be7fd3c3 ("media: em28xx: Hauppauge DualHD second tuner functionality") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com>
-
Daniel Scheller authored
Like in ddbridge, get rid of all duplicated I2C client handling constructs and rather make use of the newly added dvb_module_*() helpers. Makes things more clean and removes the (cosmetic) need for some variables. The check on a valid ptr on ci->en isn't really needed since the cxd2099 driver will set it at a time where it is going to return successfully from probing. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Daniel Scheller authored
Instead of keeping duplicated I2C client handling construct, make use of the newly introduced dvb_module_*() helpers. This not only keeps things way cleaner and removes the need for duplicated I2C client attach code, but even allows to get rid of some variables that won't help in making things look cleaner anymore. The check on a valid ptr on port->en isn't really needed since the cxd2099 driver will set it at a time where it is going to return successfully from probing. Signed-off-by:
-
Daniel Scheller authored
The CIMaX SP2 driver is a EN50221 CI controller I2C driver similar to the cxd2099 driver. Move it's Kconfig block into the newly introduced CI subsection. Cc: Olli Salonen <olli.salonen@iki.fi> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Daniel Scheller authored
The cxd2099 driver makes use of the Regmap I2C kernel API, thus add "select REGMAP_I2C" to it's Kconfig block. Also, make it default "m" if !MEDIA_SUBDRV_AUTOSELECT, just like every other dvb-frontend driver. And, while at it, remove the hyphens around the help tag. Cc: Jasmin Jessich <jasmin@anw.at> Signed-off-by:
-
Mauro Carvalho Chehab authored
If I2C is present and it is module, the DVB core should also be a module, otherwise build will now fail with: drivers/media/dvb-core/dvbdev.o: In function `dvb_module_probe': drivers/media/dvb-core/dvbdev.c:965: undefined reference to `i2c_new_device' drivers/media/dvb-core/dvbdev.c:972: undefined reference to `i2c_unregister_device' Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There's a comment there at s82168 that it is wrong. With firmware 4.0.11, sleep/resume works well without need of download it every time. But firmware 4.0.19 needs to be downloaded again after sleep. Signed-off-by: -
Mauro Carvalho Chehab authored
There are several undocumented v4l2-subdev functions that are part of kAPI. Document them. Acked-by:
-
Mauro Carvalho Chehab authored
X-Virus-Scanned: Debian amavisd-new at dev.s-opensource.com media: v4l2-subdev: get rid of __V4L2_SUBDEV_MK_GET_TRY() macro The __V4L2_SUBDEV_MK_GET_TRY() macro is used to define 3 functions that have the same arguments. The code of those functions is simple enough to just declare them, de-obfuscating the code. While here, replace BUG_ON() by WARN_ON() as there's no reason why to panic the Kernel if this fails. Acked-by:
-
- 07 Mar, 2018 15 commits
-
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/media/i2c/s5c73m3/s5c73m3-core.c:268 s5c73m3_check_status() error: uninitialized symbol 'status'. if s5c73m3_check_status() is called too late, time_is_after_jiffies(end) will return 0, causing the while to abort before reading status. The current code will do the wrong thing here, as it will still check if status != value. The right fix here is to change the logic to ensure that it will always read the status. Suggested-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb-frontends/cxd2880/cxd2880_top.c: In function ‘cxd2880_set_ber_per_period_t’: drivers/media/dvb-frontends/cxd2880/cxd2880_top.c:677:34: warning: variable ‘c’ set but not used [-Wunused-but-set-variable] struct dtv_frontend_properties *c; ^ drivers/media/dvb-frontends/cxd2880/cxd2880_top.c: In function ‘cxd2880_set_ber_per_period_t2’: drivers/media/dvb-frontends/cxd2880/cxd2880_top.c:790:34: warning: variable ‘c’ set but not used [-Wunused-but-set-variable] struct dtv_frontend_properties *c; ^ drivers/media/dvb-frontends/cxd2880/cxd2880_top.c: In function ‘cxd2880_get_frontend’: drivers/media/dvb-frontends/cxd2880/cxd2880_top.c:1799:23: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] struct cxd2880_priv *priv = NULL; ^~~~ Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/dvb-frontends/cxd2880/cxd2880_devio_spi.c:59 cxd2880_io_spi_read_reg() error: uninitialized symbol 'ret'. drivers/media/dvb-frontends/cxd2880/cxd2880_devio_spi.c:111 cxd2880_io_spi_write_reg() error: uninitialized symbol 'ret'. drivers/media/dvb-frontends/cxd2880/cxd2880_tnrdmd.c:2985 cxd2880_tnrdmd_set_cfg() error: uninitialized symbol 'ret'. Signed-off-by: -
Mauro Carvalho Chehab authored
It is not needed anymore to include the dvb-core directory, as all the public headers that used to be there was moved to include/media. Signed-off-by: -
Yasunari Takiguchi authored
This is the Makefile, Kconfig files of driver and MAINTAINERS file update about the driver for the Sony CXD2880 DVB-T2/T tuner + demodulator. Signed-off-by:
Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by:
Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by:
Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by:
Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by:
Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by:
Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Fix a trivial conflict, where the location of DVB headers got moved. Signed-off-by: -
Yasunari Takiguchi authored
Provide monitor functions (DVB-T2) for the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by:
-
Yasunari Takiguchi authored
Provide definitions, interfaces and functions needed for DVB-T2 of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by:
-
Yasunari Takiguchi authored
Provide monitor functions (DVB-T) for the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by:
-
Yasunari Takiguchi authored
Provide definitions, interfaces and functions needed for DVB-T of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by:
-
Yasunari Takiguchi authored
This provides the main dvb frontend operation functions for the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by:
-
Yasunari Takiguchi authored
These functions monitor the driver and watch for task completion. This is part of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by:
-
Yasunari Takiguchi authored
This part of the driver has the main routines to handle the tuner and demodulator functionality. The tnrdmd_mon.* files have monitor functions for the driver. This is part of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by:
-
Yasunari Takiguchi authored
Add functions for initializing, reading and writing to the SPI device for the Sony CXD2880 DVB-T2/T tuner + demodulator. Signed-off-by:
-
Yasunari Takiguchi authored
These are common files for the driver for the Sony CXD2880 DVB-T2/T tuner + demodulator. These contains helper functions for the driver. Signed-off-by:
-
