- 28 Sep, 2015 21 commits
-
-
Lars-Peter Clausen authored
commit c689a923 upstream. Add inverse unit conversion macro to convert from standard IIO units to units that might be used by some devices. Those are useful in combination with scale factors that are specified as IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will contain the maximum raw value the sensor will generate and the numerator the value it maps to in a specific unit. Sometimes datasheets specify those in different units than the standard IIO units (e.g. degree/s instead of rad/s) and so we need to do a unit conversion. From a mathematical point of view it does not make a difference whether we apply the unit conversion to the numerator or the inverse unit conversion to the denominator since (x / y) / z = x / (y * z). But as the denominator is typically a larger value and we are rounding both the numerator and denominator to integer values using the later method gives us a better precision (E.g. the relative error is smaller if we round 8000.3 to 8000 rather than rounding 8.3 to 8). This is where in inverse unit conversion macros will be used. Marked for stable as used by some upcoming fixes. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Lars-Peter Clausen authored
commit 81665372 upstream. Use the correct scale for the adis16448 gyroscope output. Signed-off-by:
-
Masahiro Yamada authored
commit 64526370 upstream. Currently, devres_get() passes devres_free() the pointer to devres, but devres_free() should be given with the pointer to resource data. Fixes: 9ac7849e ("devres: device resource management") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sudip Mukherjee authored
commit bab383de upstream. parport_find_base() will implicitly do parport_get_port() which increases the refcount. Then parport_register_device() will again increment the refcount. But while unloading the module we are only doing parport_unregister_device() decrementing the refcount only once. We add an parport_put_port() to neutralize the effect of parport_get_port(). Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Xiao Guangrong authored
commit 6f691251 upstream. We got the bug that qemu complained with "KVM: unknown exit, hardware reason 31" and KVM shown these info: [84245.284948] EPT: Misconfiguration. [84245.285056] EPT: GPA: 0xfeda848 [84245.285154] ept_misconfig_inspect_spte: spte 0x5eaef50107 level 4 [84245.285344] ept_misconfig_inspect_spte: spte 0x5f5fadc107 level 3 [84245.285532] ept_misconfig_inspect_spte: spte 0x5141d18107 level 2 [84245.285723] ept_misconfig_inspect_spte: spte 0x52e40dad77 level 1 This is because we got a mmio #PF and the handler see the mmio spte becomes normal (points to the ram page) However, this is valid after introducing fast mmio spte invalidation which increases the generation-number instead of zapping mmio sptes, a example is as follows: 1. QEMU drops mmio region by adding a new memslot 2. invalidate all mmio sptes 3. VCPU 0 VCPU 1 access the invalid mmio spte access the region originally was MMIO before set the spte to the normal ram map mmio #PF check the spte and see it becomes normal ram mapping !!! This patch fixes the bug just by dropping the check in mmio handler, it's good for backport. Full check will be introduced in later patches Reported-by:
Pavel Shirshov <ru.pchel@gmail.com> Tested-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Adam Lee authored
commit 89c043a6 upstream. Pericom PI7C9X795[1248] are Uno/Dual/Quad/Octal UART devices, this patch enables them, also defines PCI_VENDOR_ID_PERICOM here. Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
-
Peter Chen authored
commit 4bc58eb1 upstream. Fix the name of attribute Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Peter Chen authored
commit 8cd50626 upstream. Fix the name of attribute Signed-off-by:
-
Kishon Vijay Abraham I authored
commit b2fb5b1a upstream. DWC3 uses bounce buffer to handle non max packet aligned OUT transfers and the size of bounce buffer is 512 bytes. However if the host initiates OUT transfers of size more than 512 bytes (and non max packet aligned), the driver throws a WARN dump but still programs the TRB to receive more than 512 bytes. This will cause bounce buffer to overflow and corrupt the adjacent memory locations which can be fatal. Fix it by programming the TRB to receive a maximum of DWC3_EP0_BOUNCE_SIZE (512) bytes. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit e323d56e upstream. The TSADC gate clock was used in Exynos4x12 DTSI for exynos-adc driver. However TSADC is present only on Exynos4210 so on Trats2 board (with Exynos4412 SoC) the exynos-adc driver could not be probed: ERROR: could not get clock /adc@126C0000:adc(0) exynos-adc 126c0000.adc: failed getting clock, err = -2 exynos-adc: probe of 126c0000.adc failed with error -2 Instead on Exynos4x12 SoCs the main clock used by Analog to Digital Converter is located in different register and it is named in datasheet as PCLK_ADC. Regardless of the name the purpose of this PCLK_ADC clock is the same as purpose of TSADC from Exynos4210. The patch adds gate clock for Exynos4x12 using the proper register so backward compatibility is preserved. This fixes the probe of exynos-adc driver on Exynos4x12 boards and allows accessing sensors connected to it on Trats2 board (ntc,ncp15wb473 AP and battery thermistors). Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: c63c5743 ("ARM: dts: Add ADC's dt data to read raw data for exynos4x12") Reviewed-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by:
Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Ian Abbott authored
commit c04a1f17 upstream. `devpriv->ao_timer` is used while an asynchronous command is running on the AO subdevice. It also gets modified by the subdevice's `cmdtest` handler for checking new asynchronous commands, `usbduxsigma_ao_cmdtest()`, which is not correct as it's allowed to check new commands while an old command is still running. Fix it by moving the code which sets up `devpriv->ao_timer` into the subdevice's `cmd` handler, `usbduxsigma_ao_cmd()`. ** This backported patch also moves the code that sets up `devpriv->ao_sample_count` from `usbduxsigma_ao_cmdtest()` to `usbduxsigma_ao_cmd()` for the same reason as above. (This was not needed in the upstream commit.) ** Note that the removed code in `usbduxsigma_ao_cmdtest()` checked that `devpriv->ao_timer` did not end up less that 1, but that could not happen due because `cmd->scan_begin_arg` or `cmd->convert_arg` had already been range-checked. Also note that we tested the `high_speed` variable in the old code, but that is currently always 0 and means that we always use "scan" timing (`cmd->scan_begin_src == TRIG_TIMER` and `cmd->convert_src == TRIG_NOW`) and never "convert" (individual sample) timing (`cmd->scan_begin_src == TRIG_FOLLOW` and `cmd->convert_src == TRIG_TIMER`). The moved code tests `cmd->convert_src` instead to decide whether "scan" or "convert" timing is being used, although currently only "scan" timing is supported. Fixes: fb1ef622 ("staging: comedi: usbduxsigma: tidy up analog output command support") Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
commit 423b24c3 upstream. `devpriv->ai_timer` is used while an asynchronous command is running on the AI subdevice. It also gets modified by the subdevice's `cmdtest` handler for checking new asynchronous commands (`usbduxsigma_ai_cmdtest()`), which is not correct as it's allowed to check new commands while an old command is still running. Fix it by moving the code which sets up `devpriv->ai_timer` and `devpriv->ai_interval` into the subdevice's `cmd` handler, `usbduxsigma_ai_cmd()`. ** This backported patch also moves the code that sets up `devpriv->ai_sample_count` from `usbduxsigma_ai_cmdtest()` to `usbduxsigma_ai_cmd()` for the same reason as above. (This was not needed in the upstream commit.) ** Note that the removed code in `usbduxsigma_ai_cmdtest()` checked that `devpriv->ai_timer` did not end up less than than 1, but that could not happen because `cmd->scan_begin_arg` had already been checked to be at least the minimum required value (at least when `cmd->scan_begin_src == TRIG_TIMER`, which had also been checked to be the case). Fixes: b986be85 ("staging: comedi: usbduxsigma: tidy up analog input command support) Signed-off-by:
-
Mark Rustad authored
commit 7aa6ca4d upstream. Set the PCI_DEV_FLAGS_VPD_REF_F0 flag on all Intel Ethernet device functions other than function 0, so that on multi-function devices, we will always read VPD from function 0 instead of from the other functions. [bhelgaas: changelog] Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Mark Rustad authored
commit 932c435c upstream. Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through function 0 to provide VPD access on other functions. This is for hardware devices that provide copies of the same VPD capability registers in multiple functions. Because the kernel expects that each function has its own registers, both the locking and the state tracking are affected by VPD accesses to different functions. On such devices for example, if a VPD write is performed on function 0, *any* later attempt to read VPD from any other function of that device will hang. This has to do with how the kernel tracks the expected value of the F bit per function. Concurrent accesses to different functions of the same device can not only hang but also corrupt both read and write VPD data. When hangs occur, typically the error message: vpd r/w failed. This is likely a firmware bug on this device. will be seen. Never set this bit on function 0 or there will be an infinite recursion. Signed-off-by:
-
Bob Copeland authored
commit 3633ebeb upstream. We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Reported-by:
Alexis Green <agreen@cococorp.com> Tested-by:
Jesse Jones <jjones@cococorp.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Vignesh R authored
commit b9e23f32 upstream. Legacy IPs like PWMSS, present under l4per2_7xx_clkdm, cannot support smart-idle when its clock domain is in HW_AUTO on DRA7 SoCs. Hence, program clock domain to SW_WKUP. Signed-off-by:
Vignesh R <vigneshr@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Max Filippov authored
commit 4229fb12 upstream. Userspace return code may skip restoring THREADPTR register if there are no registers that need to be zeroed. This leads to spurious failures in libc NPTL tests. Always restore THREADPTR on return to userspace. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ellen Wang authored
commit 29e2d6d1 upstream. Change all occurrences of be16 to le16 in cp2112_xfer(), because SMBUS words are little endian, not big endian. Signed-off-by:
Ellen Wang <ellen@cumulusnetworks.com> Signed-off-by:
Jiri Kosina <jkosina@suse.com> Signed-off-by:
-
Ellen Wang authored
commit 6d00d153 upstream. When doing an I2C_SMBUS_BYTE write (one byte write, no address), the data to be written is in "command" not "data->byte". Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Reviewed-by:
Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by:
-
David Härdeman authored
commit a66b0c41 upstream. The input_dev is already gone when the rc device is being unregistered so checking for its presence only means that no remove uevent will be generated. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Sakari Ailus authored
commit 9d39f054 upstream. Commit 813f5c0a ("media: Change media device link_notify behaviour") modified the media controller link setup notification API and updated the OMAP3 ISP driver accordingly. As a side effect it introduced a bug by turning power on after setting the link instead of before. This results in sub-devices not being powered down in some cases when they should be. Fix it. Fixes: 813f5c0a [media] media: Change media device link_notify behaviour Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 11 Sep, 2015 3 commits
-
-
Jason Wang authored
commit 48900cb6 upstream. virtio declares support for NETIF_F_FRAGLIST, but assumes that there are at most MAX_SKB_FRAGS + 2 fragments which isn't always true with a fraglist. A longer fraglist in the skb will make the call to skb_to_sgvec overflow the sg array, leading to memory corruption. Drop NETIF_F_FRAGLIST so we only get what we can handle. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by:
-
Marcelo Leitner authored
commit 77751427 upstream. Currently we don't check if the new MTU is valid or not and this allows one to configure a smaller than minimum allowed by RFCs or even bigger than interface own MTU, which is a problem as it may lead to packet drops. If you have a daemon like NetworkManager running, this may be exploited by remote attackers by forging RA packets with an invalid MTU, possibly leading to a DoS. (NetworkManager currently only validates for values too small, but not for too big ones.) The fix is just to make sure the new value is valid. That is, between IPV6_MIN_MTU and interface's MTU. Note that similar check is already performed at ndisc_router_discovery(), for when kernel itself parses the RA. Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Luis Henriques authored
Signed-off-by:
-
- 03 Sep, 2015 16 commits
-
-
Amanieu d'Antras authored
commit 3c00cb5e upstream. This function can leak kernel stack data when the user siginfo_t has a positive si_code value. The top 16 bits of si_code descibe which fields in the siginfo_t union are active, but they are treated inconsistently between copy_siginfo_from_user32, copy_siginfo_to_user32 and copy_siginfo_to_user. copy_siginfo_from_user32 is called from rt_sigqueueinfo and rt_tgsigqueueinfo in which the user has full control overthe top 16 bits of si_code. This fixes the following information leaks: x86: 8 bytes leaked when sending a signal from a 32-bit process to itself. This leak grows to 16 bytes if the process uses x32. (si_code = __SI_CHLD) x86: 100 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = -1) sparc: 4 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = any) parsic and s390 have similar bugs, but they are not vulnerable because rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code to a different process. These bugs are also fixed for consistency. Signed-off-by:
Amanieu d'Antras <amanieu@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Amanieu d'Antras authored
commit 26135022 upstream. This function may copy the si_addr_lsb, si_lower and si_upper fields to user mode when they haven't been initialized, which can leak kernel stack data to user mode. Just checking the value of si_code is insufficient because the same si_code value is shared between multiple signals. This is solved by checking the value of si_signo in addition to si_code. Signed-off-by:
-
Amanieu d'Antras authored
commit 3ead7c52 upstream. This function may copy the si_addr_lsb field to user mode when it hasn't been initialized, which can leak kernel stack data to user mode. Just checking the value of si_code is insufficient because the same si_code value is shared between multiple signals. This is solved by checking the value of si_signo in addition to si_code. Signed-off-by:
-
Marek Marczykowski-Górecki authored
commit 30b03d05 upstream. While gntdev_release() is called the MMU notifier is still registered and can traverse priv->maps list even if no pages are mapped (which is the case -- gntdev_release() is called after all). But gntdev_release() will clear that list, so make sure that only one of those things happens at the same time. Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
David Vrabel authored
commit 1401c00e upstream. Unmapping may require sleeping and we unmap while holding priv->lock, so convert it to a mutex. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> [ luis: 3.16 prereq for: 30b03d05 xen/gntdevt: Fix race condition in gntdev_release() ] Signed-off-by:
-
Sebastian Ott authored
commit a313bdc5 upstream. Fix this error when compiling with CONFIG_SMP=n and CONFIG_DYNAMIC_DEBUG=y: drivers/s390/char/sclp_early.c: In function 'sclp_read_info_early': drivers/s390/char/sclp_early.c:87:19: error: 'EBUSY' undeclared (first use in this function) } while (rc == -EBUSY); ^ Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Stephen Powell <zlinuxman@wowway.com> Signed-off-by:
-
huaibin Wang authored
commit d4257295 upstream. When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
huaibin Wang <huaibin.wang@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
David Ahern authored
commit ba51b6be upstream. Hit the following splat testing VRF change for ipsec: [ 113.475692] =============================== [ 113.476194] [ INFO: suspicious RCU usage. ] [ 113.476667] 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED Not tainted [ 113.477545] ------------------------------- [ 113.478013] /work/monster-14/dsa/kernel.git/include/linux/rcupdate.h:568 Illegal context switch in RCU read-side critical section! [ 113.479288] [ 113.479288] other info that might help us debug this: [ 113.479288] [ 113.480207] [ 113.480207] rcu_scheduler_active = 1, debug_locks = 1 [ 113.480931] 2 locks held by setkey/6829: [ 113.481371] #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff814e9887>] pfkey_sendmsg+0xfb/0x213 [ 113.482509] #1: (rcu_read_lock){......}, at: [<ffffffff814e767f>] rcu_read_lock+0x0/0x6e [ 113.483509] [ 113.483509] stack backtrace: [ 113.484041] CPU: 0 PID: 6829 Comm: setkey Not tainted 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED [ 113.485422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 113.486845] 0000000000000001 ffff88001d4c7a98 ffffffff81518af2 ffffffff81086962 [ 113.487732] ffff88001d538480 ffff88001d4c7ac8 ffffffff8107ae75 ffffffff8180a154 [ 113.488628] 0000000000000b30 0000000000000000 00000000000000d0 ffff88001d4c7ad8 [ 113.489525] Call Trace: [ 113.489813] [<ffffffff81518af2>] dump_stack+0x4c/0x65 [ 113.490389] [<ffffffff81086962>] ? console_unlock+0x3d6/0x405 [ 113.491039] [<ffffffff8107ae75>] lockdep_rcu_suspicious+0xfa/0x103 [ 113.491735] [<ffffffff81064032>] rcu_preempt_sleep_check+0x45/0x47 [ 113.492442] [<ffffffff8106404d>] ___might_sleep+0x19/0x1c8 [ 113.493077] [<ffffffff81064268>] __might_sleep+0x6c/0x82 [ 113.493681] [<ffffffff81133190>] cache_alloc_debugcheck_before.isra.50+0x1d/0x24 [ 113.494508] [<ffffffff81134876>] kmem_cache_alloc+0x31/0x18f [ 113.495149] [<ffffffff814012b5>] skb_clone+0x64/0x80 [ 113.495712] [<ffffffff814e6f71>] pfkey_broadcast_one+0x3d/0xff [ 113.496380] [<ffffffff814e7b84>] pfkey_broadcast+0xb5/0x11e [ 113.497024] [<ffffffff814e82d1>] pfkey_register+0x191/0x1b1 [ 113.497653] [<ffffffff814e9770>] pfkey_process+0x162/0x17e [ 113.498274] [<ffffffff814e9895>] pfkey_sendmsg+0x109/0x213 In pfkey_sendmsg the net mutex is taken and then pfkey_broadcast takes the RCU lock. Since pfkey_broadcast takes the RCU lock the allocation argument is pointless since GFP_ATOMIC must be used between the rcu_read_{,un}lock. The one call outside of rcu can be done with GFP_KERNEL. Fixes: 7f6b9dbd ("af_key: locking change") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Peter Zijlstra authored
commit c7999c6f upstream. I ran the perf fuzzer, which triggered some WARN()s which are due to trying to stop/restart an event on the wrong CPU. Use the normal IPI pattern to ensure we run the code on the correct CPU. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: bad7192b ("perf: Fix PERF_EVENT_IOC_PERIOD to force-reset the period") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Marek Lindner authored
commit ef72706a upstream. The tt_local_entry deletion performed in batadv_tt_local_remove() was neither protecting against simultaneous deletes nor checking whether the element was still part of the list before calling hlist_del_rcu(). Replacing the hlist_del_rcu() call with batadv_hash_remove() provides adequate protection via hash spinlocks as well as an is-element-still-in-hash check to avoid 'blind' hash removal. Fixes: 068ee6e2 ("batman-adv: roaming handling mechanism redesign") Reported-by: alfonsname@web.de Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Marek Lindner authored
commit 354136bc upstream. batadv_softif_vlan_get() may return NULL which has to be verified by the caller. Fixes: 35df3b29 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Reported-by:
Ryan Thompson <ryan@eero.com> Signed-off-by:
-
Marc Zyngier authored
commit 126c69a0 upstream. When injecting a fault into a misbehaving 32bit guest, it seems rather idiotic to also inject a 64bit fault that is only going to corrupt the guest state. This leads to a situation where we perform an illegal exception return at EL2 causing the host to crash instead of killing the guest. Just fix the stupid bug that has been there from day 1. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Guillermo A. Amaral authored
commit 7a7184b0 upstream. The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by:
Guillermo A. Amaral <g@maral.me> Signed-off-by:
-
Takashi Iwai authored
commit 9003ebb1 upstream. The fix for deadlock in PM in commit [1ee23fe0: ALSA: usb-audio: Fix deadlocks at resuming] introduced a new check of in_pm flag. However, the brainless patch author evaluated it in a wrong way (logical AND instead of logical OR), thus usb_autopm_get_interface() is wrongly called at probing, leading to unbalance of runtime PM refcount. This patch fixes it by correcting the logic. Reported-by:
Hans Yang <hansy@nvidia.com> Fixes: 1ee23fe0 ('ALSA: usb-audio: Fix deadlocks at resuming') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alan Stern authored
commit 49718f0f upstream. The routines in scsi_rpm.c assume that if a runtime-PM callback is invoked for a SCSI device, it can only mean that the device's driver has asked the block layer to handle the runtime power management (by calling blk_pm_runtime_init(), which among other things sets q->dev). However, this assumption turns out to be wrong for things like the ses driver. Normally ses devices are not allowed to do runtime PM, but userspace can override this setting. If this happens, the kernel gets a NULL pointer dereference when blk_post_runtime_resume() tries to use the uninitialized q->dev pointer. This patch fixes the problem by calling the block layer's runtime-PM routines only if the device's driver really does have a runtime-PM callback routine. Since ses doesn't define any such callbacks, the crash won't occur. This fixes Bugzilla #101371. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Stanisław Pitucha <viraptor@gmail.com> Reported-by:
Ilan Cohen <ilanco@gmail.com> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Andy Lutomirski authored
commit 12e244f4 upstream. The previous fix confused a selector with a segment prefix. Fix it. Compile-tested only. Cc: Juergen Gross <jgross@suse.com> Reported-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
