Move the C functions and definitions related to the idle state handling
to arch/s390/include/asm/idle.h and arch/s390/kernel/idle.c. The function
s390_get_idle_time is renamed to arch_cpu_idle_time and vtime_stop_cpu to
enabled_wait.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Move the nohz_delay bit from the s390_idle data structure to the
per-cpu flags. Clear the nohz delay flag in __cpu_disable and
remove the cpu hotplug notifier that used to do this.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The sysfs attributes /sys/devices/system/cpu/cpu0/idle_count and
/sys/devices/system/cpu/cpu0/idle_time_us are reset to zero every
time a CPU is set online. The idle and iowait fields in /proc/stat
corresponding to idle_time_us are not reset. To make things
consistent do not reset the data for the sys attributes.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add support for Control Unit Initiated Reconfiguration (CUIR) to
Linux, a storage server interface to reconcile concurrent hardware
changes between storage and host.
Reviewed-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Error recovery requests may not be cleaned up correctly so that other
needed erp requests can not be build because of insufficient memory.
This would lead to an infinite loop trying to build erp requests.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Invalidate several pte entries at once if the ipte range facility
is available. Currently this works only for DEBUG_PAGE_ALLOC where
several up to 2 ^ MAX_ORDER may be invalidated at once.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix calculation to decide if a 4-level kernel page table is required.
Git commit c972cc60 "s390/vmalloc: have separate modules area"
added the separate module area which reduces the size of the vmalloc
area but fails to take it into account for the 3 vs 4 level page table
decision.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The call to topology_init is too late for the set_sched_topology call.
The initial scheduling domain structure has already been established
with default topology array. Use the smp_cpus_done() call to get the
s390 specific topology array registered early enough.

Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch moves common functions from kprobes.c to probes.c.
Thus its possible for uprobes to use them without enabling kprobes.
Signed-off-by: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Make use of the load-and-add, load-and-or and load-and-and instructions
to atomically update the read-write lock without a compare-and-swap loop.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Set the write-lock bit in the out-of-line rwlock code to indicate that
a writer is waiting. Additional readers will no be able to get the lock
until at least one writer got the lock. Additional writers have to wait
for the first writer to release the lock again.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If the vmemmap array gets filled with large pages we allocate those
pages with vmemmap_alloc_block(), which returns cleared pages.
Only for single 4k pages we call our own vmem_alloc_pages() which does
not return cleared pages. However we can also call vmemmap_alloc_block()
to allocate the 4k pages.
This way we can also make sure the vmemmap array is cleared after its
population.
Therefore we can remove the memset at the end of the function which
would clear the vmmemmap array a second time on machines which do
support EDAT1.

On very large configurations this can save us several seconds.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The architecture suggests to use address 0 as parameter for stfl,
to allow for future extensions. Using __LC_STFL_FAC_LIST (0x200)
shows which address is used, but might be not future proof.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add an owner field to the arch_rwlock_t to be able to pass the timeslice
of a virtual CPU with diagnose 0x9c to the lock owner in case the rwlock
is write-locked. The undirected yield in case the rwlock is acquired
writable but the lock is read-locked is removed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Remove tape_state from status register and report the drive's current
setting for block size instead as known from other tapes.
Density is not supported so nothing to report here.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This device driver allows accessing a HMC drive CD/DVD-ROM.
It can be used in a LPAR and z/VM environment.
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ralf Hoppe <rhoppe@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The event type masks can change asynchronously. These changes are reported
by SCLP to the OS by state-change events which are retrieved with the read
event data command. The SCLP driver has a request queue, there is a window
where the read event data request has not completed yet but the SCLP console
drivers are trying to queue output requests. As the masks are not updated
yet the requests are discarded.

The simplest fix is to queue the console requests independent of the
event type masks and rely on SCLP to return with an error code if a
specific event type is not available.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Extends the number of ap domains within the zcrypt device driver up to 256.
AP domains in the range 00..255 will be detected.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use a memory barrier + store sequence instead of a load + compare and swap
sequence to unlock a spinlock and an rw lock.
For the spinlock case this saves us two memory reads and a not needed cpu
serialization after the compare and swap instruction stored the new value.

The kernel size (performance_defconfig) gets reduced by ~14k.

Average execution time of a tight inlined spin_unlock loop drops from
5.8ns to 0.7ns on a zEC12 machine.

An artificial stress test case where several counters are protected with
a single spinlock and which are only incremented while holding the spinlock
shows ~30% improvement on a 4 cpu machine.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Reduce the number of executed instructions within the mcount block if
function tracing is enabled. We achieve that by using a non-standard
C function call ABI. Since the called function is also written in
assembler this is not a problem.
This also allows to replace the unconditional store at the beginning
of the mcount block with a larl instruction, which doesn't touch
memory.

In theory we could also patch the first instruction of the mcount block
to enable and disable function tracing. However this would break kprobes.
This could be fixed with implementing the "kprobes_on_ftrace" feature;
however keeping the odd jprobes working seems not to be possible without
a lot of code churn. Therefore keep the code easy and simply accept one
wasted 1-cycle "larl" instruction per function prologue.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Even if it has a __used annotation it is actually unused.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

We have too many combinations for function tracing. Lets simply stick to
the most advanced option, so we don't have to care of other combinations.

This means we always select DYNAMIC_FTRACE if FUNCTION_TRACER is selected.

In the s390 Makefile also remove CONFIG_FTRACE_SYSCALLS since that
functionality got moved to architecture independent code in the meantime.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This code is based on a patch from Vojtech Pavlik.
http://marc.info/?l=linux-s390&m=140438885114413&w=2

The actual implementation now differs significantly:
Instead of adding a second function "ftrace_regs_caller" which would be nearly
identical to the existing ftrace_caller function, the current ftrace_caller
function is now an alias to ftrace_regs_caller and always passes the needed
pt_regs structure and function_trace_op parameters unconditionally.

Besides that also use asm offsets to correctly allocate and access the new
struct pt_regs on the stack.

While at it we can make use of new instruction to get rid of some indirect
loads if compiled for new machines.

The passed struct pt_regs can be changed by the called function and it's new
contents will replace the current contents.

Note: to change the return address the embedded psw member of the pt_regs
structure must be changed. The psw member is right now incomplete, since
the mask part is missing. For all current use cases this should be sufficent.
Providing and restoring a sane mask would mean we need to add an epsw/lpswe
pair to the mcount code. Only these two instruction would cost us ~120 cycles
which currently seems not necessary.

Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

When the function graph tracer is disabled we can skip three additional
instructions. So let's just do this.

So if function tracing is enabled but function graph tracing is
runtime disabled, we get away with a single unconditional branch.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Currently the march flag gets only passed to C files, but not to
assembler files.
This means that we can't add new instructions like e.g. aghik to asm
files, since the assembler doesn't know of the new instructions if
the appropriate march flag isn't specified.

So also pass the march flag when compiling assembler files as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE optimization to
the 64-bit and 31-bit vdso.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If gettimeofday / clock_gettime are called multiple times in a row
the STCK instruction will stall until a difference in the result is
visible. This unnecessarily slows down the vdso calls, use stcke
instead of stck to get rid of the stall.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 supports kprobes since 2006 but is missing in the list of
architectures that support kprobes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull ext4 bugfix from Ted Ts'o.

[ Hmm.  It's possible we should make kfree() aware of error pointers,
  and use IS_ERR_OR_NULL rather than a NULL check.  But in the meantime
  this is obviously the right fix.  - Linus ]

* 'for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid trying to kfree an ERR_PTR pointer

Pull nfsd bugfixes from Bruce Fields:
 "A couple minor nfsd bugfixes"

* 'for-3.17' of git://linux-nfs.org/~bfields/linux:
  lockd: fix rpcbind crash on lockd startup failure
  nfsd4: fix rd_dircount enforcement

Nikita Yuschenko reported that booting a kernel with init=/bin/sh and
then nfs mounting without portmap or rpcbind running using a busybox
mount resulted in:

  # mount -t nfs 10.30.130.21:/opt /mnt
  svc: failed to register lockdv1 RPC service (errno 111).
  lockd_up: makesock failed, error=-111
  Unable to handle kernel paging request for data at address 0x00000030
  Faulting instruction address: 0xc055e65c
  Oops: Kernel access of bad area, sig: 11 [#1]
  MPC85xx CDS
  Modules linked in:
  CPU: 0 PID: 1338 Comm: mount Not tainted 3.10.44.cge #117
  task: cf29cea0 ti: cf35c000 task.ti: cf35c000
  NIP: c055e65c LR: c0566490 CTR: c055e648
  REGS: cf35dad0 TRAP: 0300   Not tainted  (3.10.44.cge)
  MSR: 00029000 <CE,EE,ME>  CR: 22442488  XER: 20000000
  DEAR: 00000030, ESR: 00000000

  GPR00: c05606f4 cf35db80 cf29cea0 cf0ded80 cf0dedb8 00000001 1dec3086
  00000000
  GPR08: 00000000 c07b1640 00000007 1dec3086 22442482 100b9758 00000000
  10090ae8
  GPR16: 00000000 000186a5 00000000 00000000 100c3018 bfa46edc 100b0000
  bfa46ef0
  GPR24: cf386ae0 c07834f0 00000000 c0565f88 00000001 cf0dedb8 00000000
  cf0ded80
  NIP [c055e65c] call_start+0x14/0x34
  LR [c0566490] __rpc_execute+0x70/0x250
  Call Trace:
  [cf35db80] [00000080] 0x80 (unreliable)
  [cf35dbb0] [c05606f4] rpc_run_task+0x9c/0xc4
  [cf35dbc0] [c0560840] rpc_call_sync+0x50/0xb8
  [cf35dbf0] [c056ee90] rpcb_register_call+0x54/0x84
  [cf35dc10] [c056f24c] rpcb_register+0xf8/0x10c
  [cf35dc70] [c0569e18] svc_unregister.isra.23+0x100/0x108
  [cf35dc90] [c0569e38] svc_rpcb_cleanup+0x18/0x30
  [cf35dca0] [c0198c5c] lockd_up+0x1dc/0x2e0
  [cf35dcd0] [c0195348] nlmclnt_init+0x2c/0xc8
  [cf35dcf0] [c015bb5c] nfs_start_lockd+0x98/0xec
  [cf35dd20] [c015ce6c] nfs_create_server+0x1e8/0x3f4
  [cf35dd90] [c0171590] nfs3_create_server+0x10/0x44
  [cf35dda0] [c016528c] nfs_try_mount+0x158/0x1e4
  [cf35de20] [c01670d0] nfs_fs_mount+0x434/0x8c8
  [cf35de70] [c00cd3bc] mount_fs+0x20/0xbc
  [cf35de90] [c00e4f88] vfs_kern_mount+0x50/0x104
  [cf35dec0] [c00e6e0c] do_mount+0x1d0/0x8e0
  [cf35df10] [c00e75ac] SyS_mount+0x90/0xd0
  [cf35df40] [c000ccf4] ret_from_syscall+0x0/0x3c

The addition of svc_shutdown_net() resulted in two calls to
svc_rpcb_cleanup(); the second is no longer necessary and crashes when
it calls rpcb_register_call with clnt=NULL.
Reported-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
Fixes: 679b033d "lockd: ensure we tear down any live sockets when socket creation fails during lockd_up"
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Commit 3b299709 "nfsd4: enforce rd_dircount" totally misunderstood
rd_dircount; it refers to total non-attribute bytes returned, not number
of directory entries returned.

Bring the code into agreement with RFC 3530 section 14.2.24.

Cc: stable@vger.kernel.org
Fixes: 3b299709 "nfsd4: enforce rd_dircount"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull s390 fixes from Martin Schwidefsky:
 "A bug fix for the vdso code, the loadparm for booting from SCSI is
  added and the access permissions for the dasd module parameters are
  corrected"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vdso: remove NULL pointer check from clock_gettime
  s390/ipl: Add missing SCSI loadparm attributes to /sys/firmware
  s390/dasd: Make module parameter visible in sysfs

Pull cgroup fixes from Tejun Heo:
 "This pull request includes Alban's patch to disallow '\n' in cgroup
  names.

  Two other patches from Li to fix a possible oops when cgroup
  destruction races against other file operations and one from Vivek to
  fix a unified hierarchy devel behavior"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: check cgroup liveliness before unbreaking kernfs
  cgroup: delay the clearing of cgrp->kn->priv
  cgroup: Display legacy cgroup files on default hierarchy
  cgroup: reject cgroup names with '\n'

Pull percpu fixes from Tejun Heo:
 "One patch to fix a failure path in the alloc path.  The bug is
  dangerous but probably not too likely to actually trigger in the wild
  given that there hasn't been any report yet.

  The other two are low impact fixes"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: free percpu allocation info for uniprocessor system
  percpu: perform tlb flush after pcpu_map_pages() failure
  percpu: fix pcpu_alloc_pages() failure path