EHL is a new platform using ishtp solution, add its device id
to support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Distance values reported by 2nd-gen Intuos tablets are on an inverted
scale (0 == far, 63 == near). We need to change them over to a normal
scale before reporting to userspace or else userspace drivers and
applications can get confused.

Ref: https://github.com/linuxwacom/input-wacom/issues/98
Fixes: eda01dab ("HID: wacom: Add four new Intuos devices")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The G700 suffers from the same issue than the G502:
when plugging it in, the driver tries to contact it but it fails.

This timeout is problematic as it introduce a delay in the boot,
and having only the mouse event node means that the hardware
macros keys can not be relayed to the userspace.

Link: https://github.com/libratbag/libratbag/issues/797
Fixes: 91cf9a98 ("HID: logitech-hidpp: make .probe usbhid capable")
Cc: stable@vger.kernel.org # v5.2
Reviewed-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This partially reverts commit 27fc32fd.

It turns out that the G502 has some issues with hid-logitech-hidpp:
when plugging it in, the driver tries to contact it but it fails.
So the driver bails out leaving only the mouse event node available.

This timeout is problematic as it introduce a delay in the boot,
and having only the mouse event node means that the hardware
macros keys can not be relayed to the userspace.

Filipe and I just gave a shot at the following devices:

G403 Wireless (0xC082)
G703 (0xC087)
G703 Hero (0xC090)
G903 (0xC086)
G903 Hero (0xC091)
G Pro (0xC088)

Reverting the devices we are not sure that works flawlessly.
Reviewed-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Merge commit 74acee30 ("Merge branches 'for-5.2/fixes', 'for-5.3/doc',
'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus")
inadvertently dropped this change from commit 912c6aa6
("HID: wacom: Add 2nd gen Intuos Pro Small support").
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - functional regression fix for some of the Logitech unifying devices,
   from Hans de Goede

 - race condition fix in hid-sony for bug severely affecting
   Valve/Android deployments, from Roderick Colenbrander

 - several fixes for issues found by syzbot/kasan, from Oliver Neukum
   and Hillf Danton

 - functional regression fix for Wacom Cintiq device, from Aaron
   Armstrong Skomra

 - a few other assorted device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: sony: Fix race condition between rumble and device remove.
  HID: hiddev: do cleanup in failure of opening a device
  HID: hiddev: avoid opening a disconnected device
  HID: input: fix a4tech horizontal wheel custom usage
  HID: Add quirk for HP X1200 PIXART OEM mouse
  HID: holtek: test for sanity of intfdata
  HID: wacom: fix bit shift for Cintiq Companion 2
  HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52
  HID: logitech-dj: Really fix return value of logi_dj_recv_query_hidpp_devices
  HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT
  HID: logitech-dj: add the Powerplay receiver
  HID: logitech-hidpp: add USB PID for a few more supported mice
  HID: logitech-dj: rename "gaming" receiver to "lightspeed"

Pull pti updates from Thomas Gleixner:
 "The performance deterioration departement is not proud at all to
  present yet another set of speculation fences to mitigate the next
  chapter in the 'what could possibly go wrong' story.

  The new vulnerability belongs to the Spectre class and affects GS
  based data accesses and has therefore been dubbed 'Grand Schemozzle'
  for secret communication purposes. It's officially listed as
  CVE-2019-1125.

  Conditional branches in the entry paths which contain a SWAPGS
  instruction (interrupts and exceptions) can be mis-speculated which
  results in speculative accesses with a wrong GS base.

  This can happen on entry from user mode through a mis-speculated
  branch which takes the entry from kernel mode path and therefore does
  not execute the SWAPGS instruction. The following speculative accesses
  are done with user GS base.

  On entry from kernel mode the mis-speculated branch executes the
  SWAPGS instruction in the entry from user mode path which has the same
  effect that the following GS based accesses are done with user GS
  base.

  If there is a disclosure gadget available in these code paths the
  mis-speculated data access can be leaked through the usual side
  channels.

  The entry from user mode issue affects all CPUs which have speculative
  execution. The entry from kernel mode issue affects only Intel CPUs
  which can speculate through SWAPGS. On CPUs from other vendors SWAPGS
  has semantics which prevent that.

  SMAP migitates both problems but only when the CPU is not affected by
  the Meltdown vulnerability.

  The mitigation is to issue LFENCE instructions in the entry from
  kernel mode path for all affected CPUs and on the affected Intel CPUs
  also in the entry from user mode path unless PTI is enabled because
  the CR3 write is serializing.

  The fences are as usual enabled conditionally and can be completely
  disabled on the kernel command line. The Spectre V1 documentation is
  updated accordingly.

  A big "Thank You!" goes to Josh for doing the heavy lifting for this
  round of hardware misfeature 'repair'. Of course also "Thank You!" to
  everybody else who contributed in one way or the other"

* 'x86/grand-schemozzle' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: Add swapgs description to the Spectre v1 documentation
  x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS
  x86/entry/64: Use JMP instead of JMPQ
  x86/speculation: Enable Spectre v1 swapgs mitigations
  x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations

Valve reported a kernel crash on Ubuntu 18.04 when disconnecting a DS4
gamepad while rumble is enabled. This issue is reproducible with a
frequency of 1 in 3 times in the game Borderlands 2 when using an
automatic weapon, which triggers many rumble operations.

We found the issue to be a race condition between sony_remove and the
final device destruction by the HID / input system. The problem was
that sony_remove didn't clean some of its work_item state in
"struct sony_sc". After sony_remove work, the corresponding evdev
node was around for sufficient time for applications to still queue
rumble work after "sony_remove".

On pre-4.19 kernels the race condition caused a kernel crash due to a
NULL-pointer dereference as "sc->output_report_dmabuf" got freed during
sony_remove. On newer kernels this crash doesn't happen due the buffer
now being allocated using devm_kzalloc. However we can still queue work,
while the driver is an undefined state.

This patch fixes the described problem, by guarding the work_item
"state_worker" with an initialized variable, which we are setting back
to 0 on cleanup.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Undo what we did for opening before releasing the memory slice.
Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

syzbot found the following crash on:

HEAD commit:    e96407b4 usb-fuzzer: main usb gadget fuzzer driver
git tree:       https://github.com/google/kasan.git usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000
kernel config:  https://syzkaller.appspot.com/x/.config?x=792eb47789f57810
dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e
compiler:       gcc (GCC) 9.0.0 20181231 (experimental)

==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50
kernel/locking/lockdep.c:3753
Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260

CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753
  lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412
  __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
  _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159
  hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  exit_task_work include/linux/task_work.h:22 [inline]
  do_exit+0x8ef/0x2c50 kernel/exit.c:878
  do_group_exit+0x125/0x340 kernel/exit.c:982
  get_signal+0x466/0x23d0 kernel/signal.c:2728
  do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815
  exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078
RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c
R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c

Allocated by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_kmalloc mm/kasan/common.c:487 [inline]
  __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
  kmalloc include/linux/slab.h:552 [inline]
  kzalloc include/linux/slab.h:748 [inline]
  hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
  slab_free_hook mm/slub.c:1423 [inline]
  slab_free_freelist_hook mm/slub.c:1470 [inline]
  slab_free mm/slub.c:3012 [inline]
  kfree+0xe4/0x2f0 mm/slub.c:3953
  hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff8881cf591900
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8881cf591900, ffff8881cf591b00)
The buggy address belongs to the page:
page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

In order to avoid opening a disconnected device, we need to check exist
again after acquiring the existance lock, and bail out if necessary.
Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull spi fixes from Mark Brown:
 "A bunch of small, device specific things here plus a DT bindings fix
  for the new validatable YAML binding format.

  The most notable thing is the fix for GPIO chip selects which fixes a
  corner case in updates of that code to modern APIs, unfortunately due
  to a historical mess the code around GPIO support is obscure, fragile
  and an ABI which makes and attempt to improve the situation painful"

* tag 'spi-fix-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: Add support for Intel Tiger Lake
  spi: bcm2835: Fix 3-wire mode if DMA is enabled
  spi: pxa2xx: Balance runtime PM enable/disable on error
  spi: gpio: Add SPI_MASTER_GPIO_SS flag
  spi: spi-fsl-qspi: change i.MX7D RX FIFO size
  spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg

Merge tag 'regulator-fix-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few small driver specific fixes here plus one core fix for a
  refcounting problem with DT which will have little practical impact
  unless overlays are used"

* tag 'regulator-fix-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: of: Add of_node_put() before return in function
  regulator: lp87565: Fix probe failure for "ti,lp87565"
  regulator: axp20x: fix DCDC5 and DCDC6 for AXP803
  regulator: axp20x: fix DCDCA and DCDCD for AXP806

Merge tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "A fix to the Kselftest framework to save and restore errno and a fix
  to livepatch to push and pop dynamic debug config"

* tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/livepatch: push and pop dynamic debug config
  kselftest: save-and-restore errno to allow for %m formatting

Some a4tech mice use the 'GenericDesktop.00b8' usage to inform whether
the previous wheel report was horizontal or vertical. Before
c01908a1 ("HID: input: add mapping for "Toggle Display" key") this
usage was being mapped to 'Relative.Misc'. After the patch it's simply
ignored (usage->type == 0 & usage->code == 0). Which ultimately makes
hid-a4tech ignore the WHEEL/HWHEEL selection event, as it has no
usage->type.

We shouldn't rely on a mapping for that usage as it's nonstandard and
doesn't really map to an input event. So we bypass the mapping and make
sure the custom event handling properly handles both reports.

Fixes: c01908a1 ("HID: input: add mapping for "Toggle Display" key")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.

Jonathan Teh (@jonathan-teh) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The ioctl handler uses the intfdata of a second interface,
which may not be present in a broken or malicious device, hence
the intfdata needs to be checked for NULL.

[jkosina@suse.cz: fix newly added spurious space]
Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The bit indicating BTN_6 on this device is overshifted
by 2 bits, resulting in the incorrect button being
reported.

Also fix copy-paste mistake in comments.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/71
Fixes: c7f0522a ("HID: wacom: Slim down wacom_intuos_pad processing")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Saitek X52 joystick has a pair of axes that are originally
(by the Windows driver) used as mouse pointer controls. The corresponding
usage->hid values are 0x50024 and 0x50026. Thus they are handled
as unknown axes and both get mapped to ABS_MISC. The quirk makes
the second axis to be mapped to ABS_MISC1 and thus made available
separately.

[jkosina@suse.cz: squashed two patches into one]
Signed-off-by: István Váradi <ivaradi@varadiistvan.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Commit dbcbabf7 ("HID: logitech-dj: fix return value of
logi_dj_recv_query_hidpp_devices") made logi_dj_recv_query_hidpp_devices
return the return value of hid_hw_raw_request instead of unconditionally
returning 0.

But hid_hw_raw_request returns the report-size on a successful request
(and a negative error-code on failure) where as the callers of
logi_dj_recv_query_hidpp_devices expect a 0 return on success.

This commit fixes things so that either the negative error gets returned
or 0 on success, fixing HID++ receivers such as the Logitech nano receivers
no longer working.

Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: dbcbabf7 ("HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices")
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull tpm fixes from Jarkko Sakkinen:
 "Two bug fixes that did not make into my first pull request"

* tag 'tpmdd-next-20190805' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: tpm_ibm_vtpm: Fix unallocated banks
  tpm: Fix null pointer dereference on chip register error path

Pull MTD fixes from Miquel Raynal:
 "NAND:

   - Fix Micron driver as some chips enable internal ECC correction
     during their discovery while they advertize they do not have any.

  Hyperbus:

   - Restrict the build to only ARM64 SoCs (and compile testing) which
     is what should have been done since the beginning.

   - Fix Kconfig issue by selection something instead of implying it"

* tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: hyperbus: Add hardware dependency to AM654 driver
  mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies
  mtd: rawnand: micron: handle on-die "ECC-off" devices correctly

The nr_allocated_banks and allocated banks are initialized as part of
tpm_chip_register. Currently, this is done as part of auto startup
function. However, some drivers, like the ibm vtpm driver, do not run
auto startup during initialization. This results in uninitialized memory
issue and causes a kernel panic during boot.

This patch moves the pcr allocation outside the auto startup function
into tpm_chip_register. This ensures that allocated banks are initialized
in any case.

Fixes: 879b5892 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Reported-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

If clk_enable is not defined and chip initialization
is canceled code hits null dereference.

Easily reproducible with vTPM init fail:
  swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy

BUG: kernel NULL pointer dereference, address: 00000000
...
Call Trace:
 tpm_chip_start+0x9d/0xa0 [tpm]
 tpm_chip_register+0x10/0x1a0 [tpm]
 vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy]
 process_one_work+0x214/0x5a0
 worker_thread+0x134/0x3e0
 ? process_one_work+0x5a0/0x5a0
 kthread+0xd4/0x100
 ? process_one_work+0x5a0/0x5a0
 ? kthread_park+0x90/0x90
 ret_from_fork+0x19/0x24

Fixes: 719b7d81 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.3:

   - Wire up the new clone3 syscall.

   - A fix for the PAPR SCM nvdimm driver, to fix a crash when firmware
     gives us a device that's attached to a non-online NUMA node.

   - A fix for a boot failure on 32-bit with KASAN enabled.

   - Three fixes for implicit fall through warnings, some of which are
     errors for us due to -Werror.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Kees Cook, Santosh
  Sivaraj, Stephen Rothwell"

* tag 'powerpc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kasan: fix early boot failure on PPC32
  drivers/macintosh/smu.c: Mark expected switch fall-through
  powerpc/spe: Mark expected switch fall-throughs
  powerpc/nvdimm: Pick nearby online node if the device node is not online
  powerpc/kvm: Fall through switch case explicitly
  powerpc: Wire up clone3 syscall

At the end of the v5.3 upstream kernel development cycle, Simon will be
stepping down from his role as Renesas SoC maintainer.  Starting with
the v5.4 development cycle, Geert is taking over this role.

Add Geert as a co-maintainer, and add his git repository and branch.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - detect missing missing "WITH Linux-syscall-note" for uapi headers

 - fix needless rebuild when using Clang

 - fix false-positive cc-option in Kconfig when using Clang

 - avoid including corrupted .*.cmd files in the modpost stage

 - fix warning of 'make vmlinux'

 - fix {m,n,x,g}config to not generate the broken .config on the second
   save operation.

 - some trivial Makefile fixes

* tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: Clear "written" flag to avoid data loss
  kbuild: Check for unknown options with cc-option usage in Kconfig and clang
  lib/raid6: fix unnecessary rebuild of vpermxor*.c
  kbuild: modpost: do not parse unnecessary rules for vmlinux modpost
  kbuild: modpost: remove unnecessary dependency for __modpost
  kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules
  kbuild: modpost: include .*.cmd files only when targets exist
  kbuild: initialize CLANG_FLAGS correctly in the top Makefile
  kbuild: detect missing "WITH Linux-syscall-note" for uapi headers

Pull SafeSetID maintainer update from Micah Morton:
 "Add entry in MAINTAINERS file for SafeSetID LSM"

* tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux:
  Add entry in MAINTAINERS file for SafeSetID LSM

Prior to this commit, starting nconfig, xconfig or gconfig, and saving
the .config file more than once caused data loss, where a .config file
that contained only comments would be written to disk starting from the
second save operation.

This bug manifests itself because the SYMBOL_WRITTEN flag is never
cleared after the first call to conf_write, and subsequent calls to
conf_write then skip all of the configuration symbols due to the
SYMBOL_WRITTEN flag being set.

This commit resolves this issue by clearing the SYMBOL_WRITTEN flag
from all symbols before conf_write returns.

Fixes: 8e2442a5 ("kconfig: fix missing choice values in auto.conf")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull Xtensa fix from Max Filippov:
 "Fix build for xtensa cores with coprocessors that was broken by
  entry/return abstraction patch"

* tag 'xtensa-20190803' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix build for cores with coprocessors

Pull i2c fixes from Wolfram Sang:
 "A set of driver fixes for the I2C subsystem"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: s3c2410: Mark expected switch fall-through
  i2c: at91: fix clk_offset for sama5d2
  i2c: at91: disable TXRDY interrupt after sending data
  i2c: iproc: Fix i2c master read more than 63 bytes
  eeprom: at24: make spd world-readable again

Add documentation to the Spectre document about the new swapgs variant of
Spectre v1.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull perf tooling fixes from Thomas Gleixner:
 "A set of updates for perf tools and documentation:

  perf header:
    - Prevent a division by zero
    - Deal with an uninitialized warning proper

  libbpf:
    - Fix the missiong __WORDSIZE definition for musl & al

  UAPI headers:
    - Synchronize kernel headers

  Documentation:
    - Fix the memory units for perf.data size"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  libbpf: fix missing __WORDSIZE definition
  perf tools: Fix perf.data documentation units for memory size
  perf header: Fix use of unitialized value warning
  perf header: Fix divide by zero error if f_header.attr_size==0
  tools headers UAPI: Sync if_link.h with the kernel
  tools headers UAPI: Sync sched.h with the kernel
  tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl
  tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC()
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Update tools's copy of mman.h headers
  tools headers UAPI: Update tools's copy of kvm.h headers
  tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open

Pull vdso timer fixes from Thomas Gleixner:
 "A series of commits to deal with the regression caused by the generic
  VDSO implementation.

  The usage of clock_gettime64() for 32bit compat fallback syscalls
  caused seccomp filters to kill innocent processes because they only
  allow clock_gettime().

  Handle the compat syscalls with clock_gettime() as before, which is
  not a functional problem for the VDSO as the legacy compat application
  interface is not y2038 safe anyway. It's just extra fallback code
  which needs to be implemented on every architecture.

  It's opt in for now so that it does not break the compile of already
  converted architectures in linux-next. Once these are fixed, the
  #ifdeffery goes away.

  So much for trying to be smart and reuse code..."

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64: compat: vdso: Use legacy syscalls as fallback
  x86/vdso/32: Use 32bit syscall fallback
  lib/vdso/32: Provide legacy syscall fallbacks
  lib/vdso: Move fallback invocation to the callers
  lib/vdso/32: Remove inconsistent NULL pointer checks

Pull irq fixes from Thomas Gleixner:
 "A small bunch of fixes from the irqchip department:

   - Fix a couple of UAF on error paths (RZA1, GICv3 ITS)

   - Fix iMX GPCv2 trigger setting

   - Add missing of_node_put() on error path in MBIGEN

   - Add another bunch of /* fall-through */ to silence warnings"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe()
  irqchip/irq-imx-gpcv2: Forward irq type to parent
  irqchip/irq-mbigen: Add of_node_put() before return
  irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail
  irqchip/gic-v3: Mark expected switch fall-through

Pull xfs fixes from Darrick Wong:

 - Avoid leaking kernel stack contents to userspace

 - Fix a potential null pointer dereference in the dabtree scrub code

* tag 'xfs-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Fix possible null-pointer dereferences in xchk_da_btree_block_check_sibling()
  xfs: fix stack contents leakage in the v1 inumber ioctls

Merge misc fixes from Andrew Morton:
 "17 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  drivers/acpi/scan.c: document why we don't need the device_hotplug_lock
  memremap: move from kernel/ to mm/
  lib/test_meminit.c: use GFP_ATOMIC in RCU critical section
  asm-generic: fix -Wtype-limits compiler warnings
  cgroup: kselftest: relax fs_spec checks
  mm/memory_hotplug.c: remove unneeded return for void function
  mm/migrate.c: initialize pud_entry in migrate_vma()
  coredump: split pipe command whitespace before expanding template
  page flags: prioritize kasan bits over last-cpuid
  ubsan: build ubsan.c more conservatively
  kasan: remove clang version check for KASAN_STACK
  mm: compaction: avoid 100% CPU usage during compaction when a task is killed
  mm: migrate: fix reference check race between __find_get_block() and migration
  mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker
  ocfs2: remove set but not used variable 'last_hash'
  Revert "kmemleak: allow to coexist with fault injection"
  kernel/signal.c: fix a kernel-doc markup

Pull RISC-V fixes from Paul Walmsley:
 "Three minor RISC-V-related changes for v5.3-rc3:

   - Add build ID to VDSO builds to avoid a double-free in perf when
     libelf isn't used

   - Align the RV64 defconfig to the output of "make savedefconfig" so
     subsequent defconfig patches don't get out of hand

   - Drop a superfluous DT property from the FU540 SoC DT data (since it
     must be already set in board data that includes it)"

* tag 'riscv/for-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig"
  riscv: dts: fu540-c000: drop "timebase-frequency"
  riscv: Fix perf record without libelf support

Let's document why the lock is not needed in acpi_scan_init(), right now
this is not really obvious.

[akpm@linux-foundation.org: fix tpyo]
Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memremap.c implements MM functionality for ZONE_DEVICE, so it really
should be in the mm/ directory, not the kernel/ one.

Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>