HW does not support Half-duplex mode in multi-queue
scenario. Fix it by not advertising the Half-Duplex
mode if multi-queue enabled.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ethernet controller to work.
Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
dwmac-socfpga.

Also, remove the redundant check for the reset controller pointer. The
reset driver already checks for the pointer and returns 0 if the pointer
is NULL.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE
are friends"), sungem owners reported the infamous "eth0: hw csum failure"
message.

CHECKSUM_COMPLETE has in fact never worked for this driver, but this
was masked by the fact that upper stacks had to strip the FCS, and
therefore skb->ip_summed was set back to CHECKSUM_NONE before
my recent change.

Driver configures a number of bytes to skip when the chip computes
the checksum, and for some reason only half of the Ethernet header
was skipped.

Then a second problem is that we should strip the FCS by default,
unless the driver is updated to eventually support NETIF_F_RXFCS in
the future.

Finally, a driver should check if NETIF_F_RXCSUM feature is enabled
or not, so that the admin can turn off rx checksum if wanted.

Many thanks to Andreas Schwab and Mathieu Malaterre for their
help in debugging this issue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is
enabled, add it to .gitignore to avoid committing it.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpfilter Makefile assumes that the system locale is en_US, and the
parsing of objdump output fails.
Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns
only 2 processes instead of 7.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code does:

 if (hrtimer_active(&t))
    hrtimer_cancel(&t);

However, hrtimer_cancel() checks if the timer is active, so the
test above is pointless.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

in the following script

 # tc actions add action ife encode allow prio pass index 42
 # tc actions replace action ife encode allow tcindex drop index 42

the action control should remain equal to 'pass', if the kernel failed
to replace the TC action. Pospone the assignment of the action control,
to ensure it is not overwritten in the error path of tcf_ife_init().

Fixes: ef6980b6 ("introduce IFE action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a recursive lock warning [1] can be observed with the following script,

 # $TC actions add action ife encode allow prio pass index 42
 IFE type 0xED3E
 # $TC actions replace action ife encode allow tcindex pass index 42

in case the kernel was unable to run the last command (e.g. because of
the impossibility to load 'act_meta_skbtcindex'). For a similar reason,
the kernel can leak idr in the error path of tcf_ife_init(), because
tcf_idr_release() is not called after successful idr reservation:

 # $TC actions add action ife encode allow tcindex index 47
 IFE type 0xED3E
 RTNETLINK answers: No such file or directory
 We have an error talking to the kernel
 # $TC actions add action ife encode allow tcindex index 47
 IFE type 0xED3E
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47
 IFE type 0xFEFE
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel

Since tcfa_lock is already taken when the action is being edited, a call
to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock
again. On the other hand, tcf_idr_release() needs to be called in the
error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation.
Fix both problems in tcf_ife_init().
Since the cleanup() routine can now be called when ife->params is NULL,
also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu).

 [1]
 ============================================
 WARNING: possible recursive locking detected
 4.17.0-rc4.kasan+ #417 Tainted: G            E
 --------------------------------------------
 tc/3932 is trying to acquire lock:
 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife]

 but task is already holding lock:
 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&(&p->tcfa_lock)->rlock);
   lock(&(&p->tcfa_lock)->rlock);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 2 locks held by tc/3932:
  #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife]
  #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]

 stack backtrace:
 CPU: 3 PID: 3932 Comm: tc Tainted: G            E     4.17.0-rc4.kasan+ #417
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Call Trace:
  dump_stack+0x9a/0xeb
  __lock_acquire+0xf43/0x34a0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? __mutex_lock+0x62f/0x1240
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  ? lock_acquire+0x10b/0x330
  lock_acquire+0x10b/0x330
  ? tcf_ife_cleanup+0x19/0x80 [act_ife]
  _raw_spin_lock_bh+0x38/0x70
  ? tcf_ife_cleanup+0x19/0x80 [act_ife]
  tcf_ife_cleanup+0x19/0x80 [act_ife]
  __tcf_idr_release+0xff/0x350
  tcf_ife_init+0xdde/0x13c0 [act_ife]
  ? ife_exit_net+0x290/0x290 [act_ife]
  ? __lock_is_held+0xb4/0x140
  tcf_action_init_1+0x67b/0xad0
  ? tcf_action_dump_old+0xa0/0xa0
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? memset+0x1f/0x40
  tcf_action_init+0x30f/0x590
  ? tcf_action_init_1+0xad0/0xad0
  ? memset+0x1f/0x40
  tc_ctl_action+0x48e/0x5e0
  ? mutex_lock_io_nested+0x1160/0x1160
  ? tca_action_gd+0x990/0x990
  ? sched_clock+0x5/0x10
  ? find_held_lock+0x39/0x1d0
  rtnetlink_rcv_msg+0x4da/0x990
  ? validate_linkmsg+0x680/0x680
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  netlink_rcv_skb+0x127/0x350
  ? validate_linkmsg+0x680/0x680
  ? netlink_ack+0x970/0x970
  ? __kmalloc_node_track_caller+0x304/0x3a0
  netlink_unicast+0x40f/0x5d0
  ? netlink_attachskb+0x580/0x580
  ? _copy_from_iter_full+0x187/0x760
  ? import_iovec+0x90/0x390
  netlink_sendmsg+0x67f/0xb50
  ? netlink_unicast+0x5d0/0x5d0
  ? copy_msghdr_from_user+0x206/0x340
  ? netlink_unicast+0x5d0/0x5d0
  sock_sendmsg+0xb3/0xf0
  ___sys_sendmsg+0x60a/0x8b0
  ? copy_msghdr_from_user+0x340/0x340
  ? lock_downgrade+0x5e0/0x5e0
  ? tty_write_lock+0x18/0x50
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  ? lock_downgrade+0x5e0/0x5e0
  ? lock_acquire+0x10b/0x330
  ? __audit_syscall_entry+0x316/0x690
  ? current_kernel_time64+0x6b/0xd0
  ? __fget_light+0x55/0x1f0
  ? __sys_sendmsg+0xd2/0x170
  __sys_sendmsg+0xd2/0x170
  ? __ia32_sys_shutdown+0x70/0x70
  ? syscall_trace_enter+0x57a/0xd60
  ? rcu_read_lock_sched_held+0xdc/0x110
  ? __bpf_trace_sys_enter+0x10/0x10
  ? do_syscall_64+0x22/0x480
  do_syscall_64+0xa5/0x480
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 RIP: 0033:0x7fd646988ba0
 RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0
 RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003
 RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100

Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding")
Fixes: ef6980b6 ("introduce IFE action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac:
Deduplicate bus_find_device() by name matching") and adds a comment
which should stop anyone from reintroducing the same "fix" in the future.

We can't use bus_find_device_by_name() here because the device name is
not guaranteed to be 'davinci_mdio'. On some systems it can be
'davinci_mdio.0' so we need to use strncmp() against the first part of
the string to correctly match it.

Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

if dev_get_valid_name failed, propagate its return code

and remove the setting err to ENODEV, it will be set to
0 again before dev_change_net_namespace exits.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In failure path, we overwrite err to what vnic_rq_disable() returns. In
case it returns 0, enic_open() returns success in case of error.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Fixes: e8588e26 ("enic: enable rq before updating rq descriptors")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups
need to fail if dev_match is not true. Currently, a packet to a given port
can match a socket bound to device when it should not. In the VRF case,
this causes the lookup to hit a VRF socket and not a global socket
resulting in a response trying to go through the VRF when it should not.

Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups")
Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups")
Reported-by: Lou Berger <lberger@labn.net>
Diagnosed-by: Renato Westphal <renato@opensourcerouting.org>
Tested-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

getnstimeofday64() is deprecated and getting replaced throughout
the kernel with ktime_get_*() based helpers for a more consistent
interface.

The two functions do the exact same thing, so this is just
a cosmetic change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported use after free that is caused by fib6_info being
freed without a proper RCU grace period.

CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 __read_once_size include/linux/compiler.h:188 [inline]
 find_rr_leaf net/ipv6/route.c:705 [inline]
 rt6_select net/ipv6/route.c:761 [inline]
 fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823
 ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856
 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082
 fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122
 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110
 ip6_route_output include/net/ip6_route.h:82 [inline]
 icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline]
 icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535
 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244
 dst_link_failure include/net/dst.h:427 [inline]
 ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695
 neigh_invalidate+0x246/0x550 net/core/neighbour.c:892
 neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:404
 exiting_irq arch/x86/include/asm/apic.h:527 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
 </IRQ>
RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482
Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48
RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0
RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000
R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0
R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00
 strlen include/linux/string.h:267 [inline]
 getname_kernel+0x24/0x370 fs/namei.c:218
 open_exec+0x17/0x70 fs/exec.c:882
 load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780
 search_binary_handler+0x17d/0x570 fs/exec.c:1653
 exec_binprm fs/exec.c:1695 [inline]
 __do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819
 do_execveat_common fs/exec.c:1866 [inline]
 do_execve fs/exec.c:1883 [inline]
 __do_sys_execve fs/exec.c:1964 [inline]
 __se_sys_execve fs/exec.c:1959 [inline]
 __x64_sys_execve+0x8f/0xc0 fs/exec.c:1959
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f1576a46207
Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02
RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207
RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670
RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10
R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005

Allocated by task 12188:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
 kmalloc include/linux/slab.h:513 [inline]
 kzalloc include/linux/slab.h:706 [inline]
 fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152
 ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013
 ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154
 ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660
 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
 sock_ioctl+0x30d/0x680 net/socket.c:1097
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 1402:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kfree+0xd9/0x260 mm/slab.c:3813
 fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207
 fib6_info_release include/net/ip6_fib.h:286 [inline]
 __ip6_del_rt_siblings net/ipv6/route.c:3235 [inline]
 ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316
 ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663
 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
 sock_ioctl+0x30d/0x680 net/socket.c:1097
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801b5df2580
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 8 bytes inside of
 256-byte region [ffff8801b5df2580, ffff8801b5df2680)
The buggy address belongs to the page:
page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0
raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
> ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                      ^
 ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb

Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@gmail.com>
Reported-by: syzbot+9e6d75e3edef427ee888@syzkaller.appspotmail.com
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sync both unicast and multicast lists instead of unicast twice.

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the fixes on team and bonding, this restores the ability
to set an ipvlan device's mtu to anything higher than 1500.

Fixes: 91572088 ("net: use core MTU range checking in core net infra")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The array bpq_eth_addr is only used to get the size of an
address, whereas the bcast_addr is used to set the broadcast
address. This leads to a warning when using clang:
drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not
      needed and will not be emitted [-Wunneeded-internal-declaration]
static char bpq_eth_addr[6];
            ^

Remove both variables and use the common eth_broadcast_addr
to set the broadcast address.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without
initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops
can be called when interface is down.

Move enic_rfs_flw_tbl_init to enic_probe.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
dump_stack+0x85/0xc0
register_lock_class+0x550/0x560
? __handle_mm_fault+0xa8b/0x1100
__lock_acquire+0x81/0x670
lock_acquire+0xb9/0x1e0
?  enic_get_rxnfc+0x139/0x2b0 [enic]
_raw_spin_lock_bh+0x38/0x80
? enic_get_rxnfc+0x139/0x2b0 [enic]
enic_get_rxnfc+0x139/0x2b0 [enic]
ethtool_get_rxnfc+0x8d/0x1c0
dev_ethtool+0x16c8/0x2400
? __mutex_lock+0x64d/0xa00
? dev_load+0x6a/0x150
dev_ioctl+0x253/0x4b0
sock_do_ioctl+0x9a/0x130
sock_ioctl+0x1af/0x350
do_vfs_ioctl+0x8e/0x670
? syscall_trace_enter+0x1e2/0x380
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5a/0x170
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joel Stanley says:

====================
Slience NCSI logging

v2:
  Fix indent issue and commit message based on Joe's feedback
  Add Sam's acks

Here are three changes to silence unnecessary warnings in the ncsi code.

The final patch adds Sam as the maintainer for NCSI.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sam has been handing the maintenance of NCSI for a number release cycles
now.
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to
netdev_dbg.

As Joe explains:

> netdev_dbg is not included in object code unless
> DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set.
> And then, it is not emitted into the log unless
> DEBUG is set or this specific netdev_dbg is enabled
> via the dynamic debug control file.

Which is what we're after in this case.
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This does not provide useful information. As the ncsi maintainer said:

 > either we get a channel or broadcom has gone out to lunch
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

In normal operation we see this series of messages as the host drives
the network device:

 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up

This makes all of these messages netdev_dbg. They are still useful to
debug eg. misbehaving network device firmware, but we do not need them
filling up the kernel logs in normal operation.
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start))
is clearly wrong since I40E_SKB_PAD already points to the offset where
the original xdp->data was sitting since xdp->data_hard_start is defined
as xdp->data - i40e_rx_offset(rx_ring) where latter offsets to I40E_SKB_PAD
when build skb is used.

However, also before cc5b114d ("bpf, i40e: add meta data support")
this seems broken since bpf_xdp_adjust_head() helper could have been used
to alter headroom and enlarge / shrink the frame and with that the assumption
that the xdp->data remains unchanged does not hold and would push a bogus
packet to upper stack.

ixgbe got this right in 92470808 ("ixgbe: add XDP support for pass and
drop actions"). In any case, fix it by removing the I40E_SKB_PAD from both
skb_reserve() and truesize calculation.

Fixes: cc5b114d ("bpf, i40e: add meta data support")
Fixes: 0c8493d9 ("i40e: add XDP support for pass and drop actions")
Reported-by: Keith Busch <keith.busch@linux.intel.com>
Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Tested-by: Keith Busch <keith.busch@linux.intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Fix series.

The patch series fixes few issues in the qed/qede drivers.
Please consider applying this series to "net".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not advertise DCBX_LLD_MANAGED capability i.e., do not allow
external agent to manage the dcbx/lldp negotiation. MFW acts as lldp agent
for qed* devices, and no other lldp agent is allowed to coexist with mfw.

Also updated a debug print, to not to display the redundant info.

Fixes: a1d8d8a5 ("qed: Add dcbnl support.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid calling a SIMD fastpath handler if it is NULL. The check is needed
to handle an unlikely scenario where unsolicited interrupt is destined to
a PF in INTa mode.

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Memory for packet buffers need to be freed in the error paths as there is
no consumer (e.g., upper layer) for such packets and that memory will never
get freed.
The issue was uncovered when port was attacked with flood of isatap
packets, these are multicast packets hence were directed at all the PFs.
For foce PF, this meant they were routed to the ll2 module which in turn
drops such packets.

Fixes: 0a7fb11c ("qed: Add Light L2 support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When blackhole is used on top of classful qdisc like hfsc it breaks
qlen and backlog counters because packets are disappear without notice.

In HFSC non-zero qlen while all classes are inactive triggers warning:
WARNING: ... at net/sched/sch_hfsc.c:1393 hfsc_dequeue+0xba4/0xe90 [sch_hfsc]
and schedules watchdog work endlessly.

This patch return __NET_XMIT_BYPASS in addition to NET_XMIT_SUCCESS,
this flag tells upper layer: this packet is gone and isn't queued.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

This breaks the build as this header is not meant to be used in this
way.

./include/linux/unaligned/access_ok.h:8:28: error: redefinition of ‘get_unaligned_le16’
 static __always_inline u16 get_unaligned_le16(const void *p)
                            ^~~~~~~~~~~~~~~~~~
In file included from drivers/bluetooth/hci_nokia.c:32:
./include/linux/unaligned/le_struct.h:7:19: note: previous definition of ‘get_unaligned_le16’ was here
 static inline u16 get_unaligned_le16(const void *p)

Use asm/unaligned.h instead.
Signed-off-by: David S. Miller <davem@davemloft.net>

ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on
which they are to be sent. But it doesn't take ownership of those
packets from the sock (if any) which originally owned them. They should
remain owned by their actual sender until they've left the box.

There's a hack in pskb_expand_head() to avoid adjusting skb->truesize
for certain skbs, precisely to avoid messing up sk_wmem_alloc
accounting. Ideally that hack would cover the ATM use case too, but it
doesn't — skbs which aren't owned by any sock, for example PPP control
frames, still get their truesize adjusted when the low-level ATM driver
adds headroom.

This has always been an issue, it seems. The truesize of a packet
increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't
for normal traffic, only for control frames. So I think we just got away
with it, and we probably needed to send 2GiB of LCP echo frames before
the misaccounting would ever have caused a problem and caused
atm_may_send() to start refusing packets.

Commit 14afee4b ("net: convert sock.sk_wmem_alloc from atomic_t to
refcount_t") did exactly what it was intended to do, and turned this
mostly-theoretical problem into a real one, causing PPPoATM to fail
immediately as sk_wmem_alloc underflows and atm_may_send() *immediately*
starts refusing to allow new packets.

The least intrusive solution to this problem is to stash the value of
skb->truesize that was accounted to the VCC, in a new member of the
ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that
value instead of the then-current value of skb->truesize.

Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-06-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a panic in devmap handling in generic XDP where return type
   of __devmap_lookup_elem() got changed recently but generic XDP
   code missed the related update, from Toshiaki.

2) Fix a freeze when BPF progs are loaded that include BPF to BPF
   calls when JIT is enabled where we would later bail out via error
   path w/o dropping kallsyms, and another one to silence syzkaller
   splats from locking prog read-only, from Daniel.

3) Fix a bug in test_offloads.py BPF selftest which must not assume
   that the underlying system have no BPF progs loaded prior to test,
   and one in bpftool to fix accuracy of program load time, from Jakub.

4) Fix a bug in bpftool's probe for availability of the bpf(2)
   BPF_TASK_FD_QUERY subcommand, from Yonghong.

5) Fix a regression in AF_XDP's XDP_SKB receive path where queue
   id check got erroneously removed, from Björn.

6) Fix missing state cleanup in BPF's xfrm tunnel test, from William.

7) Check tunnel type more accurately in BPF's tunnel collect metadata
   kselftest, from Jian.

8) Fix missing Kconfig fragments for BPF kselftests, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull AFS updates from Al Viro:
 "Assorted AFS stuff - ended up in vfs.git since most of that consists
  of David's AFS-related followups to Christoph's procfs series"

* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs: Optimise callback breaking by not repeating volume lookup
  afs: Display manually added cells in dynamic root mount
  afs: Enable IPv6 DNS lookups
  afs: Show all of a server's addresses in /proc/fs/afs/servers
  afs: Handle CONFIG_PROC_FS=n
  proc: Make inline name size calculation automatic
  afs: Implement network namespacing
  afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
  afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
  proc: Add a way to make network proc files writable
  afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
  afs: Rearrange fs/afs/proc.c to move the show routines up
  afs: Rearrange fs/afs/proc.c by moving fops and open functions down
  afs: Move /proc management functions to the end of the file

Pull compat updates from Al Viro:
 "Some biarch patches - getting rid of assorted (mis)uses of
  compat_alloc_user_space().

  Not much in that area this cycle..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: simplify compat ioctl handling
  signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
  vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart

Pull aio fixes from Al Viro:
 "Assorted AIO followups and fixes"

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  eventpoll: switch to ->poll_mask
  aio: only return events requested in poll_mask() for IOCB_CMD_POLL
  eventfd: only return events requested in poll_mask()
  aio: mark __aio_sigset::sigmask const

Pull networking fixes from David Miller:

 1) Various netfilter fixlets from Pablo and the netfilter team.

 2) Fix regression in IPVS caused by lack of PMTU exceptions on local
    routes in ipv6, from Julian Anastasov.

 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.

 4) Don't crash on poll in TLS, from Daniel Borkmann.

 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
    including Avahi mDNS. From Bart Van Assche.

 6) Missing of_node_put in qcom/emac driver, from Yue Haibing.

 7) We lack checking of the TCP checking in one special case during SYN
    receive, from Frank van der Linden.

 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.

 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.

10) Must grab HW caps before doing quirk checks in stmmac driver, from
    Jose Abreu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: stmmac: Run HWIF Quirks after getting HW caps
  neighbour: skip NTF_EXT_LEARNED entries during forced gc
  net: cxgb3: add error handling for sysfs_create_group
  tls: fix waitall behavior in tls_sw_recvmsg
  tls: fix use-after-free in tls_push_record
  l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
  l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
  mlxsw: spectrum_switchdev: Fix port_vlan refcounting
  mlxsw: spectrum_router: Align with new route replace logic
  mlxsw: spectrum_router: Allow appending to dev-only routes
  ipv6: Only emit append events for appended routes
  stmmac: added support for 802.1ad vlan stripping
  cfg80211: fix rcu in cfg80211_unregister_wdev
  mac80211: Move up init of TXQs
  mac80211_hwsim: fix module init error paths
  cfg80211: initialize sinfo in cfg80211_get_station
  nl80211: fix some kernel doc tag mistakes
  hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
  rds: avoid unenecessary cong_update in loop transport
  l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
  ...

Pull module updates from Jessica Yu:
 "Minor code cleanup and also allow sig_enforce param to be shown in
  sysfs with CONFIG_MODULE_SIG_FORCE"

* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Allow to always show the status of modsign
  module: Do not access sig_enforce directly

Pull uml updates from Richard Weinberger:
 "Minor updates for UML:

   - fixes for our new vector network driver by Anton

   - initcall cleanup by Alexander

   - We have a new mailinglist, sourceforge.net sucks"

* 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix raw interface options
  um: Fix initialization of vector queues
  um: remove uml initcalls
  um: Update mailing list address

Commit 67f29e07 ("bpf: devmap introduce dev_map_enqueue") changed
the return value type of __devmap_lookup_elem() from struct net_device *
to struct bpf_dtab_netdev * but forgot to modify generic XDP code
accordingly.

Thus generic XDP incorrectly used struct bpf_dtab_netdev where struct
net_device is expected, then skb->dev was set to invalid value.

v2:
- Fix compiler warning without CONFIG_BPF_SYSCALL.

Fixes: 67f29e07 ("bpf: devmap introduce dev_map_enqueue")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Merge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some small RISC-V updates I'd like to target for 4.18.

  They are all fairly small this time. Here's a short summary, there's
  more info in the commits/merges:

   - a fix to __clear_user to respect the passed arguments.

   - enough support for the perf subsystem to work with RISC-V's ISA
     defined performance counters.

   - support for sparse and cleanups suggested by it.

   - support for R_RISCV_32 (a relocation, not the 32-bit ISA).

   - some MAINTAINERS cleanups.

   - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
     always present.

  I've given these a simple build+boot test"

* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
  RISC-V: Handle R_RISCV_32 in modules
  riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
  riscv: add riscv-specific predefines to CHECKFLAGS
  riscv: split the declaration of __copy_user
  riscv: no __user for probe_kernel_address()
  riscv: use NULL instead of a plain 0
  perf: riscv: Add Document for Future Porting Guide
  perf: riscv: preliminary RISC-V support
  MAINTAINERS: Update Albert's email, he's back at Berkeley
  MAINTAINERS: Add myself as a maintainer for SiFive's drivers
  riscv: Fix the bug in memory access fixup code