Merge tag 'v5.6-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Removal of the simple-panel compatible and some minor
additional cleanups.

* tag 'v5.6-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Kill off "simple-panel" compatibles
  ARM: dts: rockchip: rename dwmmc node names to mmc
  ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc

Link: https://lore.kernel.org/r/3473489.DgqFdXXe5V@philSigned-off-by: Olof Johansson <olof@lixom.net>

"simple-panel" is a Linux driver and has never been an accepted upstream
compatible string, so remove it.

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200117230851.25434-1-robh@kernel.orgSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process rockchip-dw-mshc.txt
has to be converted to yaml. In the new setup
rockchip-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node,
so change them all to 'mmc'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200115185244.18149-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

This pull request contains Broadcom ARM-based SoC changes for 5.6,
please pull the following:

- Nicolas unifies the CMA reserved region declaration between all
  BCM283x/BCM2711 chips in order for firmwares to easily adjust those
  based on the use case needs

- Nicolas adds the Broadcom STB PCIe Root Complex Device Tree node for
  the Raspberry Pi 4. The driver will go through the PCIe maintainers
  pull request for 5.6.

* tag 'arm-soc/for-5.6/devicetree-part2' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2711: Enable PCIe controller
  ARM: dts: bcm283x: Unify CMA configuration

Link: https://lore.kernel.org/r/20200117222705.25391-2-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.

"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names.  Therefore they should be written with lowercase letters starting
with capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).

Link: https://lore.kernel.org/r/20200117190305.5257-1-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for 5.6

- Add missing power domains for smmu for J721e
- Add I2C, ADC, OSPI and UFS nodes for J721e
- Add OSPI and MCU syscon nodes for am65x
- Add IRQ line for GPIO expander on am65x

* tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu
  arm64: dts: ti: k3-am65-mcu: add system control module node
  arm64: dts: k3-am654-base-board: Add IRQ line for GPIO expander
  arm64: dts: ti: k3-am65: Add OSPI DT node
  arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials

Link: https://lore.kernel.org/r/c5b74bfc-f2f0-1b72-4a3c-4c1d478a023a@ti.comSigned-off-by: Olof Johansson <olof@lixom.net>

Add power-domains entry for smmu, so that the it is accessible as long
as the driver is active. Without this device shutdown is throwing the
below warning:
"[   44.736348] arm-smmu-v3 36600000.smmu: failed to clear cr0"
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

The MCU System control module support is added to the device tree to allow
drivers to access to their System control module registers.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add IRQ line for IO expander present on wkup_i2c bus on  AM654 EVM
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

AM654 SoC has two Cadence OSPI controller instances under Flash
subsystem (FSS). Add DT nodes for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Enable I2Cs, ADCs, OSPIs and UFS peripherals present on J721e.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Merge tag 'omap-for-v5.6/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

More dts changes for omaps for v5.6 merge window

Add basic support for first generation Amazon omap3-echo. This got
applied rather late as we discussed how to deal with SoC variants
with some accelerators unaccessible, and eventually ended up setting
up few more SoC specific dtsi files. Eventually we'll need to also
detect the disabled accelerators on driver init, but more patching
is needed for that.

* tag 'omap-for-v5.6/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Add omap3-echo
  ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725

Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.com-4Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.6/sdma-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Fix omap sdma handling for missing auxdata for v5.6 merge window

Turns out I was overly optimistic about making platform data optional, and
we still need it to pass various quirk flags. If the platform data is missing
for whatever reason, we will currently try to access non-existing data later
on.

* tag 'omap-for-v5.6/sdma-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  dmaengine: ti: omap-dma: don't allow a null od->plat pointer to be dereferenced

Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Remove fixed clock and source common clock for UART controllers.

Link: https://lore.kernel.org/r/20200114040311.6599-3-manivannan.sadhasivam@linaro.orgSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add clock controller support for Bitmain BM1880 SoC.

Link: https://lore.kernel.org/r/20200114040311.6599-2-manivannan.sadhasivam@linaro.orgSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.6
- add DDR clock controller
- GPU OPP updates

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP
  ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP
  ARM: dts: meson8b: fix the clock controller compatible string
  ARM: dts: meson8b: add the DDR clock controller
  ARM: dts: meson8: add the DDR clock controller
  ARM: dts: meson: provide the XTAL clock using a fixed-clock
  dt-bindings: clock: meson8b: add the clock inputs
  dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding

Link: https://lore.kernel.org/r/7hwo9udi7m.fsf@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.6
- new boards: libretech-pc (S912 and S905D versions)
- new board: Videostrong KII Pro
- A1: add reset controller

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add audio fifo depths
  arm64: dts: meson: add libretech-pc boards support
  dt-bindings: arm: amlogic: add libretech-pc bindings
  arm64: dts: meson: gxl: add i2c C pins
  arm64: dts: meson-sm1: add video decoder compatible
  arm64: dts: meson-g12-common: add video decoder node
  arm64: dts: meson-gxbb: add support for Videostrong KII Pro
  dt-bindings: arm: amlogic: add Videostrong KII Pro bindings
  dt-bindings: Add vendor prefix for Videostrong
  arm64: dts: meson: a1: add pinctrl controller support
  arm64: dts: meson: add reset controller for Meson-A1 SoC

Link: https://lore.kernel.org/r/7hsgkidi3k.fsf@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dts-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM dts updates for v5.6

* Add SAW L2 nodes to boot secondary cpus on IPQ40xx
* Fix remaining IRQ_TYPE_NONE on APQ8084
* Update tsens node to new style
* Add modem remoteproc node to MSM8974
* Move ADSP SMD edge into ADSP remoteproc node for MSM8974
* Add and enable wireless communication subsystem on MSM8974 and Fairphone 2
* Add MSM8974 interconnect provider nodes
* Add MSM8974 OCMEM node

* tag 'qcom-dts-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
  ARM: dts: qcom: apq8084: Remove all instances of IRQ_TYPE_NONE
  ARM: dts: qcom: apq8084: Change tsens definition to new style
  ARM: dts: msm8974: Move ADSP smd edge to ADSP PIL
  ARM: dts: msm8974: Add modem remoteproc node
  ARM: dts: msm8974-FP2: Introduce the wcnss remoteproc node
  ARM: dts: msm8974: Introduce the wcnss remoteproc node
  ARM: dts: qcom: msm8974: add interconnect nodes
  ARM: dts: qcom: msm8974: add ocmem node

Link: https://lore.kernel.org/r/20200113204448.GE3325@yogaSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.6

* Align SDM845 firmware paths with linux-firmware
* Make WiFi work on Dragonboard845c
* Wire up wakeup controller for SDM845
* Critical thermal interrupt support for SDM845, MSM8996 and MSM8998
* Enable UFS for SM8150
* Add remoteproc enablers and nodes for SM8150
* Add CPUfreq for SM8150
* Add RPMH power-domain node for SM8150
* Cleanup and refactor MSM8996 dts structure
* Add initial Inforce Computing IFC6640 dts
* Increase MSM8996 core voltage
* Fix MSM8996 USB phy settings
* Add missing alias for BLSP UART in MSM8998 MTP
* Add remoteproc nodes for ADSP, modem and sensor core for MSM8998
* Enable WiFI for MSM8998
* Introduce the SC7180 platform and the IDP development board
* Add CPUfreq, QUPs, USB, remoteproc etc for SC7180
* Enable USB OTG for Dragonboard 410c
* Add vibrator motor node for PM8916
* Properly specify APCS clocks for MSM8916
* Add CPR and HFPLL for QCS404
* Enable full CPUfreq (with AVS) for QCS404

* tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (88 commits)
  arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts
  arm64: dts: qcom: sm8150: Hard code rpmhpd constants
  arm64: dts: apq8096-db820c: Fix VDD core voltage
  arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode
  arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
  arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180
  arm64: dts: qcom: msm8996: Fix venus iommu nodename error
  arm64: dts: qcom: sdm845: add the ufs reset
  arm64: dts: qcom: sm8150: Fix UFS phy register size
  arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset
  arm64: dts: qcom: qcs404: Add CPR and populate OPP table
  arm64: dts: qcom: qcs404: Add DVFS support
  arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
  arm64: dts: qcom: qcs404: Add HFPLL node
  arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
  arm64: dts: qcom: sc7180: Add rpmh power-domain node
  arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids
  arm64: dts: msm8998: thermal: Add critical interrupt support
  arm64: dts: msm8996: thermal: Add critical interrupt support
  arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
  ...

Link: https://lore.kernel.org/r/20200113204225.GB3325@yogaSigned-off-by: Olof Johansson <olof@lixom.net>

AT91 DT for 5.6

 - Fix sama5d3 peripheral clock rate range
 - New boards: Overkiz Smartikz and Kizbox Mini, Microchip SAMA5D27
   wlsom1-ek
 - sama5d2 sdmcc fixes

* tag 'at91-5.6-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d3: define clock rate range for tcb1
  ARM: dts: at91: sama5d3: fix maximum peripheral clock rates
  ARM: dts: at91: nattis 2: remove unnecessary include
  ARM: dts: at91: add smartkiz support and a common kizboxmini dtsi file
  dt-bindings: arm: at91: Document Kizboxmini and Smartkiz boards binding
  ARM: dts: at91: rearrange kizbox dts using aliases nodes
  ARM: dts: at91: sama5d27_som1_ek: add the microchip,sdcal-inverted on sdmmc0
  ARM: dts: at91: Reenable UART TX pull-ups
  ARM: dts: at91: sama5d2: set the sdmmc gclk frequency
  ARM: dts: at91: sama5d27_som1_ek: add i2c filters properties
  ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek
  dt-bindings: ARM: at91: Document SAMA5D27 WLSOM1 and Evaluation Kit
  ARM: dts: at91: sama5d2: mark secumod as a GPIO controller
  ARM: dts: at91: sama5d2: disable pwm0 by default

Link: https://lore.kernel.org/r/20200113155423.GA1357189@piout.netSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8173:
- add dynamic power coefficient to the cpu clusters
- add jpeg decoder node

mt8183:
- add node for the Global Command Engine (gce)
- add reset cells to the infracfg node

* tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8183: add reset-cells in infracfg
  arm64: dts: mt8173: add Mediatek JPEG Codec
  arm64: dts: add gce node for mt8183
  arm64: dts: mt8173: Add dynamic power node.

Link: https://lore.kernel.org/r/46c1a244-3f74-8069-6600-8ced02775677@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

This is our usual set of DT patches for the Allwinner SoCs.

It's fairly big this time, but the highlights are:
  - Enable cpufreq and CPU thermal throttling on the A64
    - CLK_CPUX macro usage removed (changed from first pull request)
  - CSI0 support on the R40
  - CSI1 support on the A10 and A20
  - SPI support on the R40
  - PMU support on the H3, H5, H6 and R40
  - MIPI-DSI support on the A64
  - PWM support on the H6
  - Thermal sensor on the A64, A83t, H3, H5, H6 and R40
  - More DT schemas fixes and conversions
  - New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5,
                Pine64 H64 Model B, Neutis N5H3

* tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (52 commits)
  arm64: dts: allwinner: a64: enable DVFS
  arm64: dts: allwinner: a64: add dtsi with CPU operating points
  arm64: dts: allwinner: a64: add cooling maps and thermal tripping points
  arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodes
  arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks
  ARM: dts: sunxi: Use macros for references to CCU clocks
  arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board
  ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes
  arm64: dts: allwinner: a64: pinebook: Fix lid wakeup
  ARM: dts: sun8i: r40: Add device node for CSI0
  ARM: dts: sun7i: Add CSI1 controller and pinmux options
  ARM: dts: sun4i: Add CSI1 controller and pinmux options
  ARM: dts: sunxi: Add missing LVDS resets and clocks
  ARM: dts: sun8i: r40: Use tcon top clock index macros
  ARM: dts: sun8i: R40: Add PMU node
  ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K
  arm64: dts: allwinner: h6: Add thermal sensor and thermal zones
  ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board
  arm64: dts: allwinner: a64: Add MIPI DSI pipeline
  arm64: dts: allwinner: a64: Add thermal sensors and thermal zones
  ...

Link: https://lore.kernel.org/r/20200113095555.GA29848@wens.csie.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.6:

 - New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell
   board, LX2160A based Solidrun Clearfog CX and Honeycomb boards.
 - Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC.
 - Add Crypto CAAM support for i.MX8MM and i.MX8MN.
 - Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN.
 - Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
   compatibles from i.MX8M SoCs.
 - Add DDR controller nodes for i.MX8M devices.
 - Add EEPROM description for imx8mq-hummingboard-pulse and
   imx8mq-sr-som boards.
 - Enable USB1 and TypeC support for imx8mn-evk board.
 - Add FlexSPI and QSPI support for a few Layerscape SoCs and boards.
 - Add External MDIO1 node and the two RGMII PHYs connected on LX2160A.
 - Add missing SAI devices and set SAIs into async mode on LS1028A.
 - Other random device additions and enhancement for various platforms.

* tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
  arm64: dts: imx8mn: Memory node should be in board DT
  arm64: dts: imx8mm: Memory node should be in board DT
  arm64: dts: imx8mn: add crypto node
  arm64: dts: imx8mq-hummingboard-pulse: add eeprom description
  arm64: dts: imx8mq-sr-som: add eeprom description
  arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB
  arm64: dts: freescale: Add devicetree support for Thor96 board
  arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor
  arm64: dts: imx8mm: Add Crypto CAAM support
  arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell
  arm64: dts: ls1028a-rdb: enable emmc hs400 mode
  arm64: dts: ls1028a: Update edma compatible to fit eDMA driver
  arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
  arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals
  arm64: dts: lx2160a: add dts for CEX7 platforms
  arm64: dts: lx2160a: add emdio2 node
  arm64: dts: ls1028a: put SAIs into async mode
  arm64: dts: ls1028a: add missing sai nodes
  arm64: dts: imx8mn-evk: enable usb1 and typec support
  arm64: dts: imx8mn: Remove setting for IMX8MN_CLK_USB_CORE_REF
  ...

Link: https://lore.kernel.org/r/20200113034006.17430-5-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

i.MX device tree update for 5.6:

 - New board support: i.MX6SL based Tolino Shine 3 eBook reader,
   i.MX7ULP Embedded Artists COM Board, i.MX6Q/DL based Gateworks
   Ventana Boards.
 - A couple of series from Andrey Smirnov to enhance i.MX6 RDU2 and
   VF610 ZII boards.
 - Add revision in board compatible string for imx6sx-sdb-reva and
   imx7d-sdb-reva board.
 - A fixup on imx6sl-tolino-shine3 board to remove incorrect power
   supply assignment.
 - Set initial buck regulator modes explicitly for phycore-imx6 board,
   so that a wrong initial mode set by bootloader does not interfere.
 - Add Add LCD support for imx7d-pico board.
 - A couple of patches from Michael Grzeschik to enhance USB Host
   support on i.MX25.
 - A couple of patches from Michael Trimarchi to remove duplicate
   Ethernet PHY reset properties on imx6qdl-icore and switch to
   phy-handle.
 - A couple of changes to add extirq node support on LS1021A SoC and
   make use of it on the LS1021A-TSN board.
 - A few random device additions and improvements on various boards.

* tag 'imx-dt-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (33 commits)
  ARM: dts: imx: Add GW5912 board support
  ARM: dts: imx: Add GW5913 board support
  ARM: dts: imx: Add GW5910 board support
  ARM: dts: imx: Add GW5907 board support
  ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property
  ARM: dts: imx6sl-tolino-shine3: Remove incorrect power supply assignment
  ARM: dts: imx7d-pico: Add LCD support
  ARM: dts: imx6qdl-icore: Add fec phy-handle
  ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
  ARM: dts: imx7: Unify temp-grade and speed-grade nodes
  ARM: dts: imx6: phycore-som: add pmic onkey device
  ARM: dts: imx51-babbage: Fix the DVI output description
  ARM: dts: imx6qdl-apalis: mux HDMI CEC pin
  ARM: dts: imx6sll: add PXP module
  ARM: dts: colibri-imx6ull: correct wrong pinmuxing and add comments
  ARM: dts: vf610-zii-scu4-aib: Add node for switch watchdog
  ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes
  ARM: dts: vf610-zii-dev-rev-b: Drop redundant I2C properties
  ARM: dts: phycore-imx6: set buck regulator modes explicitly
  ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed
  ...

Link: https://lore.kernel.org/r/20200113034006.17430-4-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-bindings-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.6:

 - Add compatibles for boards:
     i.MX6 SoloX SDB Rev-A Board
     i.MX7 SabreSD Rev-A Board
     i.MX6SL based Tolino Shine 3 eBook reader
     i.MX7ULP Embedded Artists COM Board
     i.MX8MQ Thor96 Board
     i.MX8MQ based Google Coral Edge TPU
     i.MX6Q/DL based Gateworks Ventana Boards
     LX2160A based QDS and RDB Boards
 - Add missing imx6sll into fsl-pxp bindings.
 - Add i.MX8MQ LCDIF compatible into mxsfb bindings.

* tag 'imx-bindings-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add Gateworks Ventana i.MX6DL/Q compatibles
  dt-bindings: arm: Add devicetree binding for Thor96 Board
  dt-bindings: arm: Add Google Coral Edge TPU entry
  bindings: fsl: document compatibles of lx2160a boards
  media: dt-bindings: media: fsl-pxp: add missing imx6sll
  dt-bindings: arm: fsl: Document i.MX7ULP Embedded Artists COM board
  dt-bindings: mxsfb: Add compatible for iMX8MQ
  dt-bindings: arm: fsl: add compatible string for Tolino Shine 3
  dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board
  dt-bindings: arm: imx: Add the i.MX6SX-SDB Rev-A board

Link: https://lore.kernel.org/r/20200113034006.17430-3-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 5.6 (part 1)

 micro-DPU (uDPU) board changes (Armada 3270 based board):
 - Fix broken ethernet
 - Remove i2c-fast-mode property
 - Indicate that SFP cages support 3W modules
 SolidRun Clearfog GT 8K (Armada 8040 base board):
 - Fix switch cpu port node

* tag 'mvebu-dt64-5.6-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node
  arm64: dts: uDPU: SFP cages support 3W modules
  arm64: dts: uDPU: remove i2c-fast-mode
  arm64: dts: uDPU: fix broken ethernet

Link: https://lore.kernel.org/r/871rs53nu5.fsf@FE-laptopSigned-off-by: Olof Johansson <olof@lixom.net>

mvebu dt for 5.6 (part 1)

 - Add support for SolidRun Clearfog GTR (Armada 385 based board)
 - Move i2c0 to the SoliRrun Microsom dtsi (Armada 38x based)
 - Add EEPROM node on SoliRrun Microsom (rev 2.1)
 - Add EEPROM node on SoliRrun ClearFog Pro

* tag 'mvebu-dt-5.6-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada-388-clearfog: add eeprom
  ARM: dts: armada-38x-solidrun-microsom: add eeprom
  ARM: armada-38x-solidrun-microsom: move i2c0 to SOM DT
  ARM: dts: mvebu: add support for SolidRun Clearfog GTR

Link: https://lore.kernel.org/r/874kx13nvh.fsf@FE-laptopSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.6-rc1

These patches do some cleanup to existing nodes, add the memory
subsystem on Tegra186 and Tegra194 as well as the FUSE and APB MISC
nodes on Tegra194. There are also a few additions to the Jetson Nano
device tree to enable additional features and the force recovery
button on the Jetson AGX Xavier now produces a key code that is
actually valid. Finally, an alias is added for the Ethernet card on
Jetson TX2 to allow firmware to find it and pass a MAC address via
device tree.

* tag 'tegra-for-5.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Allow bootloader to configure Ethernet MAC on Jetson TX2
  arm64: tegra: Redefine force recovery key on Jetson AGX Xavier
  arm64: tegra: Enable SDIO on Jetson Nano M.2 Key E
  arm64: tegra: Enable PWM fan on Jetson Nano
  arm64: tegra: Add fuse/apbmisc node on Tegra194
  arm64: tegra: Make XUSB node consistent with the rest
  arm64: tegra: Add the memory subsystem on Tegra194
  arm64: tegra: Add external memory controller on Tegra186
  arm64: tegra: Add interrupt for memory controller on Tegra186
  arm64: tegra: Rename EMC on Tegra132
  arm64: tegra: Let the EMC hardware use the EMC clock

Link: https://lore.kernel.org/r/20200111003553.2411874-7-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.6-rc1

This adds memory timings for the PAZ100 and does some minor cleanup for
the external memory controller device tree node on Tegra124.

* tag 'tegra-for-5.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: dts: tegra20: paz00: Add memory timings
  ARM: tegra: Rename EMC on Tegra124
  ARM: tegra: Let the EMC hardware use the EMC clock

Link: https://lore.kernel.org/r/20200111003553.2411874-6-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.6-rc1

This contains a conversion of the Tegra124 EMC bindings to json-schema
as well as the addition of the bindings for the memory subsystem found
on Tegra186 and Tegra194.

* tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: memory: Add Tegra186 memory subsystem
  dt-bindings: memory: Add Tegra194 memory controller header
  dt-bindings: memory: Add Tegra186 memory client IDs
  dt-bindings: memory-controller: Convert Tegra124 EMC to json-schema

Link: https://lore.kernel.org/r/20200111003553.2411874-1-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

This enables bcm2711's PCIe bus, which is hardwired to a VIA
Technologies XHCI USB 3.0 controller.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

With the introduction of the Raspberry Pi 4 we were forced to explicitly
configure CMA's location, since arm64 defaults it into the ZONE_DMA32
memory area, which is not good enough to perform DMA operations on that
device. To bypass this limitation a dedicated CMA DT node was created,
explicitly indicating the acceptable memory range and size.

That said, compatibility between boards is a must on the Raspberry Pi
ecosystem so this creates a common CMA DT node so as for DT overlays to
be able to update CMA's properties regardless of the board being used.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

We want to specify per-device firmware-name, so move the zap node into
the .dts file for individual boards/devices.  This lets us get rid of
the /delete-node/ for cheza, which does not use zap.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200112195405.1132288-5-robdclark@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

I missed the fact that these constants was not yet available, so hard
code their values in the dts to make the branch compile on its own.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This is the first generation Amazon Echo from 2016.
Audio support is not yet implemented.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

DM3730 is considered as omap36xx.dtsi, while the rest has:
     DM3730 | DM3725 | AM3715 | AM3703
IVA    X    |   X    |        |
SGX    X    |        |   X    |
Where X is "supported"
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Currently when the call to dev_get_platdata returns null the driver issues
a warning and then later dereferences the null pointer.  Avoid this issue
by returning -ENODEV error rather when the platform data is null and
change the warning to an appropriate error message.

Addresses-Coverity: ("Dereference after null check")
Fixes: 211010ae ("dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

An experimental test with the command below gives this error:
rk3188-bqedison2qc.dt.yaml: dwmmc@10218000: wifi@1:
'reg' is a required property

So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110134420.11280-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Include mt8183-reset.h and add reset-cells in infracfg
in dtsi file
Signed-off-by: yong.liang <yong.liang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>