1. 12 Aug, 2014 8 commits
  2. 04 Aug, 2014 3 commits
  3. 02 Aug, 2014 1 commit
  4. 29 Jul, 2014 2 commits
  5. 28 Jul, 2014 2 commits
  6. 25 Jul, 2014 3 commits
    • Janusz Dziedzic's avatar
      ath10k: handle attention flags correctly when using A-MSDU · 0ccb7a34
      Janusz Dziedzic authored
      In case of A-MSDU RX we should check attention flags
      correctly to be sure we report correct FCS status for
      A-MSDU subframes. Without a patch we could report A-MSDU
      subframes with wrong FCS as a correct to the stack, next
      get a lot of DUP ACK TCP packets. Finally TP drop is seen
      and this drop depends on FCS errors ratio for A-MSDU frame.
      
      Example test case when TP drop is seen:
      - ath10k configured as an AP
      - used ath10k station
      - forced A-MSDU (7 frames) on STA
      - other traffic on channel (often FCS errors)
      - monitor iface added on AP
      - TCP STA -> AP traffic (iperf)
      
      a) Iperf logs for case without the patch:
      
      echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU
      [ ID] Interval       Transfer     Bandwidth
      [  3]  0.0- 5.0 sec  56.6 MBytes  95.0 Mbits/sec
      [  3]  5.0-10.0 sec  60.4 MBytes   101 Mbits/sec
      [  3] 10.0-15.0 sec  60.2 MBytes   101 Mbits/sec
      [  3] 15.0-20.0 sec  60.2 MBytes   101 Mbits/sec
      [  3] 20.0-25.0 sec  63.8 MBytes   107 Mbits/sec
      [  3] 25.0-30.0 sec  64.9 MBytes   109 Mbits/sec
      
      echo "7 64" > htt_max_amsdu_ampdu  // set 7 A-MSDU subframes
      [  3] 30.0-35.0 sec  40.0 MBytes  67.1 Mbits/sec
      [  3] 35.0-40.0 sec  35.9 MBytes  60.2 Mbits/sec
      [  3] 40.0-45.0 sec  36.9 MBytes  61.9 Mbits/sec
      [  3] 45.0-50.0 sec  37.9 MBytes  63.5 Mbits/sec
      [  3] 50.0-55.0 sec  34.5 MBytes  57.9 Mbits/sec
      [  3] 55.0-60.0 sec  25.4 MBytes  42.6 Mbits/sec
      [  3] 60.0-65.0 sec  48.2 MBytes  81.0 Mbits/sec
      [  3] 65.0-70.0 sec  28.8 MBytes  48.2 Mbits/sec
      [  3] 70.0-75.0 sec  29.2 MBytes  49.1 Mbits/sec
      [  3] 75.0-80.0 sec  22.9 MBytes  38.4 Mbits/sec
      [  3] 80.0-85.0 sec  26.4 MBytes  44.2 Mbits/sec
      [  3] 85.0-90.0 sec  31.5 MBytes  52.8 Mbits/sec
      
      b) Iperf logs for case with patch:
      
      echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU
      [  3] local 192.168.12.2 port 57512 connected with 192.168.12.1 port 5001
      [ ID] Interval       Transfer     Bandwidth
      [  3]  0.0- 5.0 sec  60.8 MBytes   102 Mbits/sec
      [  3]  5.0-10.0 sec  62.2 MBytes   104 Mbits/sec
      [  3] 10.0-15.0 sec  60.9 MBytes   102 Mbits/sec
      
      echo "7 64" > htt_max_amsdu_ampdu  // set 7 A-MSDU subframes
      [  3] 15.0-20.0 sec  68.1 MBytes   114 Mbits/sec
      [  3] 20.0-25.0 sec  80.5 MBytes   135 Mbits/sec
      [  3] 25.0-30.0 sec  83.0 MBytes   139 Mbits/sec
      [  3] 30.0-35.0 sec  79.1 MBytes   133 Mbits/sec
      [  3] 35.0-40.0 sec  77.1 MBytes   129 Mbits/sec
      [  3] 40.0-45.0 sec  77.4 MBytes   130 Mbits/sec
      Reported-by: default avatarDenton Gentry <denton.gentry@gmail.com>
      Signed-off-by: default avatarJanusz Dziedzic <janusz.dziedzic@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      0ccb7a34
    • Michal Kazior's avatar
      ath10k: don't advertise IBSS iftype for 10.x · cf850d1d
      Michal Kazior authored
      The 10.x firmware does not support IBSS mode at
      all. It can't beacon and it crashes when trying to
      scan.
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      cf850d1d
    • Michal Kazior's avatar
      ath10k: fix Rx aggregation reordering · aa5b4fbc
      Michal Kazior authored
      Firmware doesn't perform Rx reordering so it is
      left to the host driver to do that.
      
      Use mac80211 to perform reordering instead of
      re-inventing the wheel.
      
      This fixes TCP throughput issues in some
      environments.
      Reported-by: default avatarDenton Gentry <denton.gentry@gmail.com>
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      aa5b4fbc
  7. 24 Jul, 2014 1 commit
  8. 23 Jul, 2014 7 commits
  9. 22 Jul, 2014 13 commits