- 05 Dec, 2019 40 commits
-
-
Michael Ellerman authored
[ Upstream commit 47918bc6 ] In update_lmb_associativity_index() we lookup dr_node using of_find_node_by_path() which takes a reference for us. In the non-error case we forget to drop the reference. Note that find_aa_index() does modify properties of the node, but doesn't need an extra reference held once it's returned. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit 0deae39c ] When the watchdog timer is set in interrupt mode, it causes a machine check when it times out. The purpose of this mode is to ease debugging, not to crash the kernel and reboot the machine. This patch implements a special handling for that, in order to not crash the kernel if the watchdog times out while in interrupt or within the idle task. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood: added missing #include] Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kangjie Lu authored
[ Upstream commit cd07e370 ] tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so, returns with its error code. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jesper Dangaard Brouer authored
[ Upstream commit 77ea5f4c ] The frame_size passed to build_skb must be aligned, else it is possible that the embedded struct skb_shared_info gets unaligned. For correctness make sure that xdpf->headroom in included in the alignment. No upstream drivers can hit this, as all XDP drivers provide an aligned headroom. This was discovered when playing with implementing XDP support for mvneta, which have a 2 bytes DSA header, and this Marvell ARM64 platform didn't like doing atomic operations on an unaligned skb_shinfo(skb)->dataref addresses. Fixes: 1c601d82 ("bpf: cpumap xdp_buff to skb conversion and allocation") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Parav Pandit authored
[ Upstream commit d5108e69 ] Current rxe device counters are not thread safe. When multiple QPs are used, they can be racy. Make them thread safe by making it atomic64. Fixes: 0b1e5b99 ("IB/rxe: Add port protocol stats") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Luc Van Oostenryck authored
[ Upstream commit 2c38f035 ] print_st_err() is defined with its 4th argument taking an 'enum drbd_state_rv' but its prototype use an int for it. Fix this by using 'enum drbd_state_rv' in the prototype too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lars Ellenberg authored
[ Upstream commit f708bd08 ] "suspending" IO is overloaded. It can mean "do not allow new requests" (obviously), but it also may mean "must not complete pending IO", for example while the fencing handlers do their arbitration. When adjusting disk options, we suspend io (disallow new requests), then wait for the activity-log to become unused (drain all IO completions), and possibly replace it with a new activity log of different size. If the other "suspend IO" aspect is active, pending IO completions won't happen, and we would block forever (unkillable drbdsetup process). Fix this by skipping the activity log adjustment if the "al-extents" setting did not change. Also, in case it did change, fail early without blocking if it looks like we would block forever. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lars Ellenberg authored
[ Upstream commit fe43ed97 ] Multiple failure scenario: a) all good Connected Primary/Secondary UpToDate/UpToDate b) lose disk on Primary, Connected Primary/Secondary Diskless/UpToDate c) continue to write to the device, changes only make it to the Secondary storage. d) lose disk on Secondary, Connected Primary/Secondary Diskless/Diskless e) now try to re-attach on Primary This would have succeeded before, even though that is clearly the wrong data set to attach to (missing the modifications from c). Because we only compared our "effective" and the "to-be-attached" data generation uuid tags if (device->state.conn < C_CONNECTED). Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE) compare the uuids, and reject the attach. This patch also tries to improve the reverse scenario: first lose Secondary, then Primary disk, then try to attach the disk on Secondary. Before this patch, the attach on the Secondary succeeds, but since commit drbd: disconnect, if the wrong UUIDs are attached on a connected peer the Primary will notice unsuitable data, and drop the connection hard. Though unfortunately at a point in time during the handshake where we cannot easily abort the attach on the peer without more refactoring of the handshake. We now reject any attach to "unsuitable" uuids, as long as we can see a Primary role, unless we already have access to "good" data. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lars Ellenberg authored
[ Upstream commit 94c43a13 ] During handshake, if we are diskless ourselves, we used to accept any size presented by the peer. Which could be zero if that peer was just brought up and connected to us without having a disk attached first, in which case both peers would just "flip" their volume sizes. Now, even a diskless node will ignore "zero" sizes presented by a diskless peer. Also a currently Diskless Primary will refuse to shrink during handshake: it may be frozen, and waiting for a "suitable" local disk or peer to re-appear (on-no-data-accessible suspend-io). If the peer is smaller than what we used to be, it is not suitable. The logic for a diskless node during handshake is now supposed to be: believe the peer, if - I don't have a current size myself - we agree on the size anyways - I do have a current size, am Secondary, and he has the only disk - I do have a current size, am Primary, and he has the only disk, which is larger than my current size Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexey Kardashevskiy authored
[ Upstream commit c2057701 ] The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in skiboot's NPU driver does not touch the pci_error_type parameter so it might have garbage but the powernv code analyzes it nevertheless. This initializes pcierr and fstate to zero in all call sites. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexey Kardashevskiy authored
[ Upstream commit 517ad4ae ] As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered memory. If there is a bug in memory release, the loop in tce_iommu_release() becomes infinite; this actually happened to me. This makes the loop finite and prints a warning on every failure to make the code more bug prone. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Benjamin Herrenschmidt authored
[ Upstream commit 3cfb9ebe ] The bamboo dts has a bug: it uses a non-naturally aligned range for PCI memory space. This isnt' supported by the code, thus causing PCI to break on this system. This is due to the fact that while the chip memory map has 1G reserved for PCI memory, it's only 512M aligned. The code doesn't know how to split that into 2 different PMMs and fails, so limit the region to 512M. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit 49a502ea ] As several other arches including x86, this patch makes it explicit that a bad page fault is a NULL pointer dereference when the fault address is lower than PAGE_SIZE In the mean time, this page makes all bad_page_fault() messages shorter so that they remain on one single line. And it prefixes them by "BUG: " so that they get easily grepped. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Avoid pr_cont()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit b18f0ae9 ] This patch fixes early DEBUG messages in prom.c: - Use %px instead of %p to see the addresses - Cast memblock_phys_mem_size() with (unsigned long long) to avoid build failure when phys_addr_t is not 64 bits. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Joel Stanley authored
[ Upstream commit 72e7bcc2 ] When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Madhavan Srinivasan authored
[ Upstream commit 2d46d487 ] Raw event code has couple of fields "unit" and "cache" in it, to capture the "unit" to monitor for a given pmcxsel and cache reload qualifier to program in MMCR1. isa207_get_constraint() refers "unit" field to update the MMCRC (L2/L3) Event bus control fields with "cache" bits of the raw event code. These are power8 specific and not supported by PowerISA v3.0 pmu. So wrap the checks to be power8 specific. Also, "cache" bit field is referred to update MMCR1[16:17] and this check can be power8 specific. Fixes: 7ffd948f ('powerpc/perf: factor out power8 pmu functions') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kyle Roeschley authored
[ Upstream commit 5803c128 ] When ath6kl was reworked to share code between regular and scheduled scans in commit 3b8ffc6a ("ath6kl: Configure probed SSID list consistently"), probed SSID entry changed from 1-index to 0-indexed. However, ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its indexing so that we correctly clear out the probed SSID list. Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kyle Roeschley authored
[ Upstream commit fb376a49 ] Commit dd45b759 ("ath6kl: Include match ssid list in scheduled scan") merged the probed and matched SSID lists before sending them to the firmware. In the process, it assumed match set support is always available in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check that the firmware supports matching SSIDs in scheduled scans before setting MATCH_SSID_FLAG. Fixes: dd45b759 ("ath6kl: Include match ssid list in scheduled scan") Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stefan Wahren authored
[ Upstream commit 861cb5eb ] Since commit 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag") the Raspberry Pi 3 A+ (BCM43455) isn't able to operate in AP mode with hostapd (device_ap_sme=1 use_monitor=0): brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52 So add the missing mgmt_stypes for AP mode to fix this. Fixes: 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag") Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Varun Prakash authored
[ Upstream commit 9934613e ] In case of ->vport_create() call scsi_add_host_with_dma() instead of scsi_add_host() to pass correct dma device. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Anatoliy Glagolev authored
[ Upstream commit 17b18eaa ] The intent of invoking configfs_depend_item in commit 7474f52a ("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg") was to prevent a physical Fibre Channel port removal when virtual (NPIV) ports announced through that physical port are active. The change does not work as expected: it makes enabled physical port dependent on target configfs subsystem (the port's parent), something the configfs guarantees anyway. Besides, scheduling work in a worker thread and waiting for the work's completion is not really a valid workaround for the requirement not to call configfs_depend_item from a configfs callback: the call occasionally deadlocks. Thus, removing configfs_depend_item calls does not break anything and fixes the deadlock problem. Signed-off-by: Anatoliy Glagolev <glagolig@gmail.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bart Van Assche authored
[ Upstream commit 2ee00f6a ] This patch avoids that the SCSI mid-layer keeps retrying forever if ib_post_send() fails. This was discovered while testing immediate data support and passing a too large num_sge value to ib_post_send(). Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 57ce8ba0 ] OpenRISC was mainlined as "openrisc", not "or32". vmlinux.lds is generated from vmlinux.lds.S. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexander Shiyan authored
[ Upstream commit a8da3c78 ] Function max310x_tx_empty() accesses the IRQSTS register, which is cleared by IC when reading, so if there is an interrupt status, we will lose it. This patch implement the transmitter check only by the current FIFO level. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jonathan Bakker authored
[ Upstream commit 22bba805 ] The Broadcom controller on aries S5PV210 boards sends out a couple of unknown packets after the firmware is loaded. This will cause logging of errors such as: Bluetooth: hci0: Frame reassembly failed (-84) This is probably also the case with other boards, as there are related Android userspace patches for custom ROMs such as https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/ Since this appears to be intended behaviour, treated them as diagnostic packets. Note that this is another variant of commit 01d5e44a ("Bluetooth: hci_bcm: Handle empty packet after firmware loading") Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kangjie Lu authored
[ Upstream commit 966e927b ] If palmas_smps_read() fails, we should not use the read data in "reg" which may contain random value. The fix inserts a check for the return value of palmas_smps_read(): If it fails, we return the error code upstream and stop using "reg". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit 32c8c4c6 ] mfsrin() takes segment num from bits 31-28 (IBM bits 0-3). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Clarify bit numbering] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit e93ba1b7 ] This patch fixes the loop in p_block_mapped() and v_block_mapped() to scan the entire bat_addrs[] array. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Petr Machata authored
[ Upstream commit 6db92468 ] When a failure occurs in rtnl_configure_link(), the current code calls unregister_netdevice() to roll back the earlier call to register_netdevice(), and jumps to errout, which calls vxlan_fdb_destroy(). However unregister_netdevice() calls transitively ndo_uninit, which is vxlan_uninit(), and that already takes care of deleting the default FDB entry by calling vxlan_fdb_delete_default(). Since the entry added earlier in __vxlan_dev_create() is exactly the default entry, the cleanup code in the errout block always leads to double free and thus a panic. Besides, since vxlan_fdb_delete_default() always destroys the FDB entry with notification enabled, the deletion of the default entry is notified even before the addition was notified. Instead, move the unregister_netdevice() call after the manual destroy, which solves both problems. Fixes: 0241b836 ("vxlan: fix default fdb entry netlink notify ordering during netdev create") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tao Ren authored
[ Upstream commit 86fe57fc ] TIMER_INTR_MASK register (Base Address of Timer + 0x38) is not designed for masking interrupts on ast2500 chips, and it's not even listed in ast2400 datasheet, so it's not safe to access TIMER_INTR_MASK on aspeed chips. Similarly, TIMER_INTR_STATE register (Base Address of Timer + 0x34) is not interrupt status register on ast2400 and ast2500 chips. Although there is no side effect to reset the register in fttmr010_common_init(), it's just misleading to do so. Besides, "count_down" is renamed to "is_aspeed" in "fttmr010" structure, and more comments are added so the code is more readble. Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 5050ae5f ] We accidentally return success on this error path. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nick Bowler authored
[ Upstream commit 7ca860e3 ] The bulkstat family of ioctls are problematic on x32, because there is a mixup of native 32-bit and 64-bit conventions. The xfs_fsop_bulkreq struct contains pointers and 32-bit integers so that matches the native 32-bit layout, and that means the ioctl implementation goes into the regular compat path on x32. However, the 'ubuffer' member of that struct in turn refers to either struct xfs_inogrp or xfs_bstat (or an array of these). On x32, those structures match the native 64-bit layout. The compat implementation writes out the 32-bit version of these structures. This is not the expected format for x32 userspace, causing problems. Fortunately the functions which actually output these xfs_inogrp and xfs_bstat structures have an easy way to select which output format is required, so we just need a little tweak to select the right format on x32. Signed-off-by: Nick Bowler <nbowler@draconx.ca> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nick Bowler authored
[ Upstream commit c456d644 ] While inspecting the ioctl implementations, I noticed that the compat implementation of XFS_IOC_ATTRLIST_BY_HANDLE does not do exactly the same thing as the native implementation. Specifically, the "cursor" does not appear to be written out to userspace on the compat path, like it is on the native path. This adjusts the compat implementation to copy out the cursor just like the native implementation does. The attrlist cursor does not require any special compat handling. This fixes xfstests xfs/269 on both IA-32 and x32 userspace, when running on an amd64 kernel. Signed-off-by: Nick Bowler <nbowler@draconx.ca> Fixes: 0facef7f ("xfs: in _attrlist_by_handle, copy the cursor back to userspace") Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Heinz Mauelshagen authored
[ Upstream commit 74694bcb ] Sending a check/repair message infrequently leads to -EBUSY instead of properly identifying an active resync. This occurs because raid_message() is testing recovery bits in a racy way. Fix by calling decipher_sync_action() from raid_message() to properly identify the idle state of the RAID device. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bob Peterson authored
[ Upstream commit bc020561 ] Before this patch, function do_grow would not reserve enough journal blocks in the transaction to unstuff jdata files while growing them. This patch adds the logic to add one more block if the file to grow is jdata. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sweet Tea authored
[ Upstream commit a00f5276 ] The flakey target is documented to be able to corrupt the Nth byte in a bio, but does not corrupt byte indices after the first biovec in the bio. Change the corrupting function to actually corrupt the Nth byte no matter in which biovec that index falls. A test device generating two-page bios, atop a flakey device configured to corrupt a byte index on the second page, verified both the failure to corrupt before this patch and the expected corruption after this change. Signed-off-by: John Dorminy <jdorminy@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Peter Hutterer authored
[ Upstream commit 46b14eef ] Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 054f2400 ] Some values in the Peripheral Function Select Register 10 descriptor are shifted by one position, which may cause a peripheral function to be programmed incorrectly. Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was already the case for the HSCK0 pin in field IP10[5:3]. Fixes: ac1ebc21 ("sh-pfc: Add sh7734 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 1b99d0c8 ] The Port F Control Register 3 (PFCR3) contains only a single field. However, counting from left to right, it is the fourth field, not the first field. Insert the missing dummy configuration values (3 fields of 16 values) to fix this. The descriptor for the Port F Control Register 0 (PFCR0) lacks the description for the 4th field (PF0 Mode, PF0MD[2:0]). Add the missing configuration values to fix this. Fixes: a8d42fc4 ("sh-pfc: Add sh7264 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 755a5b80 ] The SEL_I2C1 (MOD_SEL0[21:20]) field in Module Select Register 0 has a width of 2 bits, i.e. it allows programming one out of 4 different configurations. However, the MOD_SEL0_21_20 macro contains 8 values instead of 4, overflowing into the subsequent fields in the register, and thus breaking the configuration of the latter. Fix this by dropping the bogus last 4 values, including the non-existent SEL_I2C1_4 configuration. Fixes: 6d4036a1 ("pinctrl: sh-pfc: Initial R8A77990 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-