- 26 Jul, 2011 39 commits
-
-
Hugh Dickins authored
Make the pagevec_lookup loops in truncate_inode_pages_range(), invalidate_mapping_pages() and invalidate_inode_pages2_range() more consistent with each other. They were relying upon page->index of an unlocked page, but apologizing for it: accept it, embrace it, add comments and WARN_ONs, and simplify the index handling. invalidate_inode_pages2_range() had special handling for a wrapped page->index + 1 = 0 case; but MAX_LFS_FILESIZE doesn't let us anywhere near there, and a corrupt page->index in the radix_tree could cause more trouble than that would catch. Remove that wrapped handling. invalidate_inode_pages2_range() uses min() to limit the pagevec_lookup when near the end of the range: copy that into the other two, although it's less useful than you might think (it limits the use of the buffer, rather than the indices looked up). Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Use consistent variable names in truncate_pagecache(), truncate_setsize(), vmtruncate() and vmtruncate_range(). unmap_mapping_range() and vmtruncate_range() have mismatched interfaces: don't change either, but make the vmtruncates more precise about what they expect unmap_mapping_range() to do. vmtruncate_range() is currently called only with page-aligned start and end+1: can handle unaligned start, but unaligned end+1 would hit BUG_ON in truncate_inode_pages_range() (lacks partial clearing of the end page). Signed-off-by:
-
Hugh Dickins authored
Correct comment on truncate_inode_pages*() in linux/mm.h; and remove declaration of page_unuse(), it didn't exist even in 2.2.26 or 2.4.0! Signed-off-by:
-
Hugh Dickins authored
The often-NULL data arg to read_cache_page() and read_mapping_page() functions is misdescribed as "destination for read data": no, it's the first arg to the filler function, often struct file * to ->readpage(). Satisfy checkpatch.pl on those filler prototypes, and tidy up the declarations in linux/pagemap.h. Signed-off-by:
-
David S. Miller authored
Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
David S. Miller authored
Luckily there are still a few software PTE bits remaining and they even match up in both the sun4u and sun4v pte layouts. Signed-off-by:
-
David S. Miller authored
Make use of the generic RCU page table freeing on Sparc64, doing so allows for race-free software page-table walkers like gup_fast(). Signed-off-by:
-
David S. Miller authored
With the recent mmu_gather changes that included generic RCU freeing of page-tables, it is now quite straightforward to implement gup_fast() on sparc64. This patch: Remove the page table quicklists. They are pointless and make it harder to use RCU page table freeing and share code with other architectures. BTW, this is the second time this has happened, see commit 3c936465 ("[SPARC64]: Kill pgtable quicklists and use SLAB.") Signed-off-by:
-
Dmitry Fink authored
- shmem pages are not immediately available, but they are not potentially available either, even if we swap them out, they will just relocate from memory into swap, total amount of immediate and potentially available memory is not going to be affected, so we shouldn't count them as potentially free in the first place. - nr_free_pages() is not an expensive operation anymore, there is no need to split the decision making in two halves and repeat code. Signed-off-by:
Dmitry Fink <dmitry.fink@palm.com> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
-
Andrew Morton authored
RED_INACTIVE is a slab thing, and reusing it for memblock was inappropriate, because memblock is dealing with phys_addr_t's which have a Kconfigurable sizeof(). Create a new poison type for this application. Fixes the sparse warning warning: cast truncates bits from constant value (9f911029d74e35b becomes 9d74e35b) Reported-by:H Hartley Sweeten <hartleys@visionengravers.com> Tested-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
David Rientjes authored
/proc/pid/oom_adj is deprecated and scheduled for removal in August 2012 according to Documentation/feature-removal-schedule.txt. This patch makes the warning more verbose by making it appear as a more serious problem (the presence of a stack trace and being multiline should attract more attention) so that applications still using the old interface can get fixed. Very popular users of the old interface have been converted since the oom killer rewrite has been introduced. udevd switched to the /proc/pid/oom_score_adj interface for v162, kde switched in 4.6.1, and opensshd switched in 5.7p1. At the start of 2012, this should be changed into a WARN() to emit all such incidents and then finally remove the tunable in August 2012 as scheduled. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
David Rientjes authored
The badness() function in the oom killer was renamed to oom_badness() in a63d83f4 ("oom: badness heuristic rewrite") since it is a globally exported function for clarity. The prototype for the old function still existed in linux/oom.h, so remove it. There are no existing users. Also fixes documentation and comment references to badness() and adjusts them accordingly. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Andrew Morton authored
ZAP_BLOCK_SIZE became unused in the preemptible-mmu_gather work ("mm: Remove i_mmap_lock lockbreak"). So zap it. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: -
Chris Forbes authored
Fix coding style issues flagged by checkpatch.pl Signed-off-by:
Chris Forbes <chrisf@ijw.co.nz> Acked-by:
Eric B Munson <emunson@mgebm.net> Signed-off-by:
-
Chris Wright authored
The lock is released first thing in all three branches. Simplify this by unconditionally releasing lock and remove else clause which was only there to be sure lock was released. Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Johannes Weiner <jweiner@redhat.com> Signed-off-by:
-
Daniel Kiper authored
Commit a539f353 ("mm: add SECTION_ALIGN_UP() and SECTION_ALIGN_DOWN() macro") introduced the SECTION_ALIGN_UP() and SECTION_ALIGN_DOWN() macros. Use those macros to increase code readability. Signed-off-by:
Daniel Kiper <dkiper@net-space.pl> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
WANG Cong authored
In commit a2c8990a ("memsw: remove noswapaccount kernel parameter"), Michal forgot to remove some left pieces of noswapaccount in the tree, this patch removes them all. Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Acked-by:
-
KOSAKI Motohiro authored
Commit bae9c19b ("thp: split_huge_page_mm/vma") changed locking behavior of walk_page_range(). Thus this patch changes the comment too. Signed-off-by:
-
KOSAKI Motohiro authored
Originally, walk_hugetlb_range() didn't require a caller take any lock. But commit d33b9f45 ("mm: hugetlb: fix hugepage memory leak in walk_page_range") changed its rule. Because it added find_vma() call in walk_hugetlb_range(). Any locking-rule change commit should write a doc too. [akpm@linux-foundation.org: clarify comment] Signed-off-by:
-
KOSAKI Motohiro authored
Currently, walk_page_range() calls find_vma() every page table for walk iteration. but it's completely unnecessary if walk->hugetlb_entry is unused. And we don't have to assume find_vma() is a lightweight operation. So this patch checks the walk->hugetlb_entry and avoids the find_vma() call if possible. This patch also makes some cleanups. 1) remove ugly uninitialized_var() and 2) #ifdef in function body. Signed-off-by:
-
KOSAKI Motohiro authored
The doc of find_vma() says, /* Look up the first VMA which satisfies addr < vm_end, NULL if none. */ struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr) { (snip) Thus, caller should confirm whether the returned vma matches a desired one. Signed-off-by: -
KOSAKI Motohiro authored
Document some swap token aging design decisions. Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
KOSAKI Motohiro authored
global_faults and last_aging are only used in grab_swap_token(). Move them into grab_swap_token(). Signed-off-by:
-
KOSAKI Motohiro authored
http://www.cs.wm.edu/~sjiang/token.pdf is now dead. Replace it with an alive alternative. Signed-off-by:
-
Daniel Kiper authored
Memory hotplug support for Xen balloon driver. It should be mentioned that hotplugged memory is not onlined automatically. It should be onlined by user through standard sysfs interface. Memory could be hotplugged in following steps: 1) dom0: xl mem-max <domU> <maxmem> where <maxmem> is >= requested memory size, 2) dom0: xl mem-set <domU> <memory> where <memory> is requested memory size; alternatively memory could be added by writing proper value to /sys/devices/system/xen_memory/xen_memory0/target or /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU, 3) domU: for i in /sys/devices/system/memory/memory*/state; do \ [ "`cat "$i"`" = offline ] && echo online > "$i"; done Memory could be onlined automatically on domU by adding following line to udev rules: SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'" In that case step 3 should be omitted. Signed-off-by:Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Daniel Kiper authored
This patch contains online_page_callback and apropriate functions for registering/unregistering online page callbacks. It allows to do some machine specific tasks during online page stage which is required to implement memory hotplug in virtual machines. Currently this patch is required by latest memory hotplug support for Xen balloon driver patch which will be posted soon. Additionally, originial online_page() function was splited into following functions doing "atomic" operations: - __online_page_set_limits() - set new limits for memory management code, - __online_page_increment_counters() - increment totalram_pages and totalhigh_pages, - __online_page_free() - free page to allocator. It was done to: - not duplicate existing code, - ease hotplug code devolpment by usage of well defined interface, - avoid stupid bugs which are unavoidable when the same code (by design) is developed in many places. [akpm@linux-foundation.org: use explicit indirect-call syntax] Signed-off-by: -
Axel Lin authored
Since commit a19a6ee6 "backlight: Allow properties to be passed at registration" and commit bb7ca747 "backlight: add backlight type", we can set backlight type and max_brightness before backlights are registered. Some newly added drivers did not set it properly, let's fix it. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Donghwa Lee <dh09.lee@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Jingoo Han authored
Add the ams369fg06 amoled panel driver. The ams369fg06 amoled panel (480 x 800) driver uses 3-wired SPI inteface. The brightness can be controlled by gamma setting of amoled panel. [sfr@canb.auug.org.au: fix build error] [axel.lin@gmail.com: unregister backlight device when unloading the module] [axel.lin@gmail.com: staticize ams369fg06_shutdown] Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: anish singh <anish198519851985@gmail.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Axel Lin authored
We have set props.max_brightness before registering backlight device. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Axel Lin authored
- Fix checking of wrong return value for backlight_device_register() - Properly free allocated resources in ld9040_probe() error path and ld9040_remove(). Signed-off-by:
-
Peter Zijlstra authored
Vito said: : The system has many usb disks coming and going day to day, with their : respective bdi's having min_ratio set to 1 when inserted. It works for : some time until eventually min_ratio can no longer be set, even when the : active set of bdi's seen in /sys/class/bdi/*/min_ratio doesn't add up to : anywhere near 100. : : This then leads to an unrelated starvation problem caused by write-heavy : fuse mounts being used atop the usb disks, a problem the min_ratio setting : at the underlying devices bdi effectively prevents. Fix this leakage by resetting the bdi min_ratio when unregistering the BDI. Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Reported-by:
Vito Caputo <lkml@pengaru.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@kernel.org> Signed-off-by:
-
Alexander Stein authored
If dmi_get_system_info() returns NULL, pch_phub_probe() will dereferencea a zero pointer. This oops was observed on an Atom based board which has no BIOS, but a bootloder which doesn't privde DMI data. Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Cc: Greg KH <gregkh@suse.de> Signed-off-by:
-
WANG Cong authored
Fix the following build error: arch/xtensa/include/asm/uaccess.h:403: error: implicit declaration of function 'prefetch' arch/xtensa/include/asm/uaccess.h:412: error: implicit declaration of function 'prefetchw' Signed-off-by:
-
Dan Rosenberg authored
Prevent an arbitrary kernel read. Check the user pointer with access_ok() before copying data in. [akpm@linux-foundation.org: s/EIO/EFAULT/] Signed-off-by:
Dan Rosenberg <drosenberg@vsecurity.com> Cc: Christian Zankel <chris@zankel.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Ian Campbell authored
In a subsquent patch I have a const struct page in my hand... [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
-
Ian Campbell authored
These uses are read-only and in a subsequent patch I have a const struct page in my hand... [akpm@linux-foundation.org: fix warnings in lowmem_page_address()] Signed-off-by:
-
Becky Bruce authored
This is needed on HIGHMEM systems - we don't always have a virtual address so store the physical address and map it in as needed. [akpm@linux-foundation.org: cleanup] Signed-off-by:
Becky Bruce <beckyb@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Becky Bruce authored
This: vma->vm_pgoff & ~(huge_page_mask(h) >> PAGE_SHIFT) is incorrect on 32-bit. It causes us to & the pgoff with something that looks like this (for a 4m hugepage): 0xfff003ff. The mask should be flipped and *then* shifted, to give you 0x0000_03fff. Signed-off-by: -
Manfred Spraul authored
If a semaphore array is removed and in parallel a sleeping task is woken up (signal or timeout, does not matter), then the woken up task does not wait until wake_up_sem_queue_do() is completed. This will cause crashes, because wake_up_sem_queue_do() will read from a stale pointer. The fix is simple: Regardless of anything, always call get_queue_result(). This function waits until wake_up_sem_queue_do() has finished it's task. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=27142Reported-by:
Yuriy Yevtukhov <yuriy@ucoz.com> Reported-by:
Harald Laabs <kernel@dasr.de> Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: <stable@kernel.org> [2.6.35+] Signed-off-by:
-
- 25 Jul, 2011 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] s5pv210: make needlessly global symbols static [CPUFREQ] exynos4210: make needlessly global symbols static [CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation [CPUFREQ] S5PV210: Add reboot notifier to prevent system hang [CPUFREQ] S5PV210: Adjust udelay prior to voltage scaling down [CPUFREQ] S5PV210: Lock a mutex while changing the cpu frequency [CPUFREQ] S5PV210: Add pm_notifier to prevent system unstable [CPUFREQ] S5PV210: Add arm/int voltage control support [CPUFREQ] S5PV210: Add additional symantics for "relation" in cpufreq with pm [CPUFREQ] S3C64xx: Notify transition complete as soon as frequency changed [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq [CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq [CPUFREQ] Remove some vi noise that escaped into the Makefile. [CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/ [CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq [CPUFREQ] Handle CPUs with different capabilities in acpi-cpufreq
-
