An error occurred fetching the project authors.
- 16 Oct, 2008 16 commits
-
-
Thomas Gleixner authored
Share more duplicated code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
show_interrupts() and proc helpers are basically the same for 32 and 64 bit. Move them to a shared source file. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
The sparseirq patches introduced some more ugliness in show_interrupts(). Clean it up all together and make the code easier to read by splitting out the "tail" function which prints the special interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
This code is not ready, but we need to rip it out instead of rebasing as we would lose the APIC/IO_APIC unification otherwise. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Yinghai Lu authored
Arjan van de Ven noticed that we changed IRQ numbers from decimal to hex in /proc/interrupts - that can break user-space utilities like irqbalanced. Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
Ingo said sparse_irq is some intrusive. need to make it selectable to make it simple, remove irq_desc as parameter in some functions. (ack, eoi, set_affinity). may need to make member if irq_chip to take irq_desc, or struct irq later. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
also print out irq no in /proc/interrups and /proc/stat in hex, so could tell bus/dev/func. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
loop with irq_desc list Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
change names: irq_desc() ==> irq_desc_alloc __irq_desc() ==> irq_desc Also split a few of the uses in lowlevel x86 code. v2: need to check if desc is null in smp_irq_move_cleanup Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
so we don't get new one that we don't need it. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
So we could remove some duplicated calling to irq_desc v2: make sure irq_desc in init/main.c is not used without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
remove irq limit checks - nr_irqs is dynamic and we expand anytime. v2: fix checking about result irq_cfg_without_new, so could use msi again v3: use irq_desc_without_new to check irq is valid Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
also add first_free_entry and pin_map_size, which were NR_IRQS derived constants. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 04 Sep, 2008 1 commit
-
-
Andi Kleen authored
Impact: aestetic Capitalize function call interrupts consistently. All other descriptions in /proc/interrupts are capitalized except for "function call interrupts". Capitalize it too for consistency. While that's technically a published ABI I think the risk of anyone relying on that text to stay the same is negligible. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
- 25 May, 2008 1 commit
-
-
Jan Beulich authored
LAPIC interrupts, which don't go through the generic interrupt handling code, aren't accounted for in /proc/stat. Hence this patch adds a mechanism architectures can use to accordingly adjust the statistics. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 30 Jan, 2008 2 commits
-
-
H. Peter Anvin authored
We have a lot of code which differs only by the naming of specific members of structures that contain registers. In order to enable additional unifications, this patch drops the e- or r- size prefix from the register names in struct pt_regs, and drops the x- prefixes for segment registers on the 32-bit side. This patch also performs the equivalent renames in some additional places that might be candidates for unification in the future. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Match i386, where we have this in the irq code. It belongs there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 17 Oct, 2007 2 commits
-
-
Jan Beulich authored
It doesn't seem to make sense to hide these, even if their counts can't change at the point in time they're being displayed. [ tglx: arch/x86 adaptation ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Joe Korty authored
Add missing IRQs and IRQ descriptions to /proc/interrupts. /proc/interrupts is most useful when it displays every IRQ vector in use by the system, not just those somebody thought would be interesting. This patch inserts the following vector displays to the i386 and x86_64 platforms, as appropriate: rescheduling interrupts TLB flush interrupts function call interrupts thermal event interrupts threshold interrupts spurious interrupts A threshold interrupt occurs when ECC memory correction is occuring at too high a frequency. Thresholds are used by the ECC hardware as occasional ECC failures are part of normal operation, but long sequences of ECC failures usually indicate a memory chip that is about to fail. Thermal event interrupts occur when a temperature threshold has been exceeded for some CPU chip. IIRC, a thermal interrupt is also generated when the temperature drops back to a normal level. A spurious interrupt is an interrupt that was raised then lowered by the device before it could be fully processed by the APIC. Hence the apic sees the interrupt but does not know what device it came from. For this case the APIC hardware will assume a vector of 0xff. Rescheduling, call, and TLB flush interrupts are sent from one CPU to another per the needs of the OS. Typically, their statistics would be used to discover if an interrupt flood of the given type has been occuring. AK: merged v2 and v4 which had some more tweaks AK: replace Local interrupts with Local timer interrupts AK: Fixed description of interrupt types. [ tglx: arch/x86 adaptation ] [ mingo: small cleanup ] Signed-off-by: Joe Korty <joe.korty@ccur.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Tim Hockin <thockin@hockin.org> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 13 Oct, 2007 1 commit
-
-
Dave Jones authored
Since the x86 merge, lots of files that referenced their own filenames are no longer correct. Rather than keep them up to date, just delete them, as they add no real value. Additionally: - fix up comment formatting in scx200_32.c - Remove a credit from myself in setup_64.c from a time when we had no SCM - remove longwinded history from tsc_32.c which can be figured out from git. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 11 Oct, 2007 2 commits
-
-
Thomas Gleixner authored
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Thomas Gleixner authored
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 10 Oct, 2007 1 commit
-
-
Robert Olsson authored
As noted by Christoph Hellwig, pktgen was the only user so it can now be removed. [ Add missing cases caught by Adrian Bunk. -DaveM ] Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Jun, 2007 1 commit
-
-
Siddha, Suresh B authored
Force irq migration path during cpu offline, is not using proper locks and irq_chip mask/unmask routines. This will result in some races(especially the device generating the interrupt can see some inconsistent state, resulting in issues like stuck irq,..). Appended patch fixes the issue by taking proper lock and encapsulating irq_chip set_affinity() with a mask() before and an unmask() after. This fixes a MSI irq stuck issue reported by Darrick Wong. There are several more general bugs in this area(irq migration in the process context). For example, 1. Possibility of missing edge triggered irq. 2. Reliable method of migrating level triggered irq in the process context. We plan to look and close these in the near future. Eric says: In addition even with the fix from Suresh there is still at least one nasty hardware race in fixup_irqs(). However we exercise that code path rarely enough that we are unlikely to hit it in the real world, and that race seems to have existed since the code was merged. And a fix for that is not coming soon as it is an open investigation area if we can fix irq migration to work outside of irq context or if we have to rework the requirements imposed by the generic cpu hotplug and layer on fixup_irqs(). So this may come up again. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-and-tested-by: Darrick Wong <djwong@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 May, 2007 1 commit
-
-
Roman Zippel authored
Recently a few direct accesses to the thread_info in the task structure snuck back, so this wraps them with the appropriate wrapper. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 13 Feb, 2007 1 commit
-
-
Eric W. Biederman authored
Occasionally the kernel has bugs that result in no irq being found for a given cpu vector. If we acknowledge the irq the system has a good chance of continuing even though we dropped an irq message. If we continue to simply print a message and not acknowledge the irq the system is likely to become non-responsive shortly there after. AK: Fixed compilation for UP kernels Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: "Luigi Genoni" <luigi.genoni@pirelli.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
- 07 Dec, 2006 1 commit
-
-
Andi Kleen authored
Signed-off-by: Andi Kleen <ak@suse.de>
-
- 17 Oct, 2006 1 commit
-
-
Ingo Molnar authored
Introduce desc->name and eliminate the handle_irq_name() hack. Add set_irq_chip_and_handler_name() to set the flow type and name at once. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Matthew Wilcox <willy@debian.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 09 Oct, 2006 1 commit
-
-
Eric W. Biederman authored
Due to code bugs or misbehaving hardware it is possible that we can receive an interrupt that we have not mapped into a linux irq. Calling BUG when that happens is very rude, and if the problem is mild enough prevents anything else from getting done. So instead of calling BUG just scream loudly about the problem and continue running. We don't have enough knowledge to know which interrupt triggered this behavior so we don't acknowledge it. This will likely prevent a recurrence of the problem by jamming up the works with an unacknowledged interrupt. If the interrupt was something important it is quite possible that nothing productive will happen past this point. But it is now at least possible to keep working if the kernel can survive without the interrupt we dropped on the floor. Solutions like irqpoll should generally make dropped irqs non-fatal. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 05 Oct, 2006 1 commit
-
-
David Howells authored
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 04 Oct, 2006 3 commits
-
-
Eric W. Biederman authored
This refactors the irq handling code to make the vectors a per cpu resource so the same vector number can be simultaneously used on multiple cpus for different irqs. This should make systems that were hitting limits on the total number of irqs much more livable. [akpm@osdl.org: build fix] [akpm@osdl.org: __target_IO_APIC_irq is unneeded on UP] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric W. Biederman authored
This is a small pessimization but it paves the way for making this information per cpu. Which allows the the maximum number of IRQS to become NR_CPUS*224. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
This patch converts all the x86_64 PIC controllers layers to the new and simpler irq-chip interrupt handling layer. [mingo@elte.hu: The patch also enables the fasteoi handler for x86_64] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 26 Sep, 2006 2 commits
-
-
Andi Kleen authored
Nobody has been setting the mismatch counter and the ifdef was never set so remove it. Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
IO-APIC or local APIC can only be disabled at runtime anyways and Kconfig has forced these options on for a long time now. The Kconfigs are kept only now for the benefit of the shared acpi boot.c code. Signed-off-by: Andi Kleen <ak@suse.de>
-
- 03 Jul, 2006 1 commit
-
-
Ingo Molnar authored
Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 29 Jun, 2006 1 commit
-
-
Ingo Molnar authored
Consolidation: remove the irq_affinity[NR_IRQS] array and move it into the irq_desc[NR_IRQS].affinity field. [akpm@osdl.org: sparc64 build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-