Merge tag 'qcom-arm64-defconfig-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM64 Based defconfig Updates for v4.17" from Andy Gross:

* Enable cpufreq governors, QCOM TSENS, and QCOM APCS driver

* tag 'qcom-arm64-defconfig-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: defconfig: enable more cpufreq governors
  arm64: defconfig: enable thermal sensor on QCOM platforms
  arm64: defconfig: Enable the APCS IPC driver on Qualcomm platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'armsoc-versatile-drm-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Pull "defconfig changes for Versatile DRM" from Linus Walleij:

This augments the RealView and Versatile defconfig to use the PL111
DRM driver rather than the old fbdev driver.

* tag 'armsoc-versatile-drm-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: defconfig: Configure Versatile boards to use PL111 DRM
  ARM: defconfig: Update Versatile defconfig
  ARM: defconfig: Switch RealView boards to use P111 DRM
  ARM: defconfig: Update RealView defconfig

Merge tag 'amlogic-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/soc

Pull "Amlogic defconfig fixes for v4.17" from Kevin Hilman

* tag 'amlogic-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: defconfig: enable MESON EFUSE

Merge tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Defconfig updates for omap variants for v4.17 merge window"
from Tony Lindgren:

We need to enable MMC_SDHCI option in both omap2plus_defconfig and
multi_v7_defconfig so systems are able to mount root when the dts files
get updated for sdhci.

Then let's update omap2plus_defconfig so we can patch it easier. And as
Arnd noticed earlier, just running make savedefconfig will accidentally
drop few Kconfig options. This is happening because some options are no
longer available as loadable modules like LIRC. Or new dependencies have
been added such as SND_OSSEMUL for selecting SOUND_OSS_CORE.

So we first move the unchanged options around to their make savedefconfig
suggested place, then update the options to prevent make savedefconfig
dropping some options accidentally, and then finally drop the unused
options.

And after that we enable options DRM_OMAP and 8250_OMAP. These both have
been around for years now. And we do have 8250_OMAP warn about console
being redirected with SERIAL_8250_OMAP_TTYO_FIXUP option that is enabled
by default. Some users may need to update their inittab to use ttyS*
instead of ttyO* though. If this turns out to be a problem, we may want
to introduce a separate compatible for 8250-omap. But I think we're good
to go with the SERIAL_8250_OMAP_TTYO_FIXUP warning now. Let's not update
multi_v7_defconfig yet though and first see how 8250_OMAP change plays
out.

We also enable few new options for PM on am335x and am437x, and CEC in
omap2plus_defconfig. Naturally similar options can be later on added to
multi_v7_defconfig, but in this series we only enable OTG, MUSB and the
related PHYs in multi_v7_defconfig to make it more usable for distros.

* tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module
  ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants
  ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules
  ARM: omap2plus_defconfig: Enable 8250_OMAP
  ARM: omap2plus_defconfig: Switch to use omapdrm by default
  ARM: omap2plus_defconfig: Enable CEC
  ARM: omap2plus_defconfig: Enable am335x and am437x PM options
  ARM: omap2plus_defconfig: Drop unneeded options
  ARM: omap2plus_defconfig: Add SND_OSSEMUL
  ARM: omap2plus_defconfig: Update LIRC options
  ARM: omap2plus_defconfig: Select MFD_TI_LMU
  ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth
  ARM: omap2plus_defconfig: Update for moved options
  ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
  ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Defconfig Updates for v4.17" from Simon Horman:

Updates to shmobile defconfig:

* Redresh defconfig to ease future maintenence overhead

* Disable CONFIG_EMBEDDED

  Geert Uytterhoeven says "CONFIG_EXPERT exposes too many config options
  that do not matter for development.  E.g. it prohibits using the default
  values for the various SH_SCI options.  However, CONFIG_EMBEDDED selects
  CONFIG_EXPERT, so it cannot be disabled.

  Hence disable CONFIG_EMBEDDED, and compensate for the loss of
  CONFIG_DEBUG_KERNEL by enabling the latter.

  Actual impact, all harmless:
    - CONFIG_NAMESPACES=y (plus a few related CONFIG_*_NS options),
    - CONFIG_SYSCTL_SYSCALL=n,
    - CONFIG_SERIAL_SH_SCI_NR_UARTS changed from 20 to 18,
    - Some HID support became enabled,
    - CONFIG_DEBUG_MEMORY_INIT=y,"

* Enable RZA1 pin controller

  This allows the Genmai board with RZ/A1 (r7s72100) SoC to once
  again boot using the shmobile defconfig.

* tag 'renesas-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED
  ARM: shmobile: defconfig: Refresh
  ARM: shmobile: Enable RZA1 pin controller

Merge tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.17" from Simon Horman:

Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs

* tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: defconfig: enable R8A77965 SoC
  arm64: defconfig: Enable PWM and USB for R-Car
  arm64: defconfig: enable R8A77980 SoC

Merge tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Pull "arm64: Default configuration updates for v4.17-rc1" from Thierry Reding:

Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.

* tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Enable the Tegra SMMU by default
  arm64: defconfig: Enable CONFIG_TEGRA_BPMP_THERMAL
  arm64: defconfig: Enable CONFIG_ARM_TEGRA186_CPUFREQ
  arm64: defconfig: Enable NVIDIA Tegra194 support

Merge tag 'imx-defconfig-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX defconfig updates for 4.17" from Shawn Guo:

 - Re-sync defconfig files by running savedefconfig.
 - Enable generic fsl-asoc-card driver for imx_v4_v5_defconfig.
 - Enable MAG3110 magnetometer sensor driver, AC97 and WM8962 codec
   driver, DA9062/63 PMIC, RTC and Watchdog support for
   imx_v6_v7_defconfig.

* tag 'imx-defconfig-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  ARM: imx_v6_v7_defconfig: Select CONFIG_SND_SOC_WM8962 explicitly
  ARM: imx_v6_v7_defconfig: Re-sync defconfig
  ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver
  ARM: imx_v6_v7_defconfig: Enable AC97 codec support
  ARM: imx: Update imx_v6_v7_defconfig for mag3110 support
  ARM: imx_v6_v7_defconfig: enable OP-TEE
  ARM: imx_v6_v7_defconfig: select the CONFIG_CPUFREQ_DT

When selecting SOC_IMX6SLL but not SOC_IMX6SL, we get a link error:

arch/arm/mach-imx/mach-imx6sl.o: In function `imx6sl_init_late':
mach-imx6sl.c:(.init.text+0x14): undefined reference to `imx6sl_cpuidle_init'

This adds the missing line to the Makefile to also build the cpuidle
support that we need here.

Fixes: dee5dee2 ("ARM: imx: Add basic msl support for imx6sll")
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The cpuidle support calls cpu_suspend(), which is compiled conditionally,
and fails to link unless something selects CONFIG_ARM_CPU_SUSPEND.

arch/arm/mach-imx/cpuidle-imx6sx.o: In function `imx6sx_enter_wait':
cpuidle-imx6sx.c:(.text+0x6c): undefined reference to `cpu_suspend'

This adds an explicit select statement here.
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Re-sync the defconfig by doing:

make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig

So keep it in sync to help further changes in defconfig.

The explanation for removing the Kconfig symbols:

CONFIG_FHANDLE=y: verified that it is still selected
selected
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y: does not exist anymore
CONFIG_NVMEM=y: verified that it is still selected
CONFIG_LOCKUP_DETECTOR=y: need to select CONFIG_SOFTLOCKUP_DETECTOR now
CONFIG_TIMER_STATS=y: does not exist anymore

Boot tested on a imx28evk.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

fsl-asoc-card machine driver also supports sgtl5000, so use it favor
of the imx-sgtl5000 machine driver, which will be probably be removed
in the future.

Tested on a imx25-pdk board.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Re-sync the defconfig by doing:

make savedefconfig
cp defconfig arch/arm/configs/imx_v4_v5_defconfig

So keep it in sync to help further changes in defconfig.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The DRM driver is now finalized for the Versatile board family,
so switch the defconfig to use this driver instead of the old
fbdev driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This updates the Versatile defconfig to the latest savedefconfig
results reflecting changes in Kconfig. We add in the Flash memory
support that has been available upstream for a while now.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The DRM driver is now finalized for the RealView board family,
so switch the defconfig to use this driver instead of the old
fbdev driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Just update with some new results from savedefconfig so we are
in sync with what has happened in Kconfig upstream.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'imx-soc-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX SoC changes for 4.17" from Shawn Guo:

 - Add i.MX 6SoloLiteLite (i.MX6SLL) SoC support on top of the existing
   i.MX6SL platform code.
 - Improve the SoC revision mapping by utilizing the MAJOR field of
   ANATOP DIGPROG register.
 - Add CPUIDLE_FLAG_TIMER_STOP flag for cpuidle ARM power off state,
   so that we can use ARM generic timer for some i.MX6 SoC.
 - Set low-power interrupt mask for i.MX25 to support STOP mode.
 - Drop EPIT driver as there is no user of it.
 - Simplify the error path of imx6_pm_get_base() a bit.

* tag 'imx-soc-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: Add basic msl support for imx6sll
  ARM: imx: pm-imx6: Return the error directly
  ARM: imx: avic: set low-power interrupt mask for imx25
  ARM: imx: Improve the soc revision calculation flow
  ARM: imx: add timer stop flag to ARM power off state
  ARM: imx: Remove epit support

This patchs adds the minimal defconfig for the OXNAS ARMv6 SoCs
including the OX820 SoC and needed minimal configurations.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Display and graphics can't work together without an SMMU, so it is
effectively always getting enabled anyway.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Pull "Broadcom defconfig changes for 4.17" from Florian Fainelli:

This pull request contains multi_v7_defconfig changes for Broadcom
ARM-based SoC for 4.17, please pull the following:

- Tuomas enables the BCM2835 AUX driver which is necessary to provide
  console on the Raspberry Pi 3

- Stefan turns on support for the BCM43438 Bluetooth adapter connected
  via UART on the Raspberry Pi Zero Wireless and he also turns on
  support for the thermal driver on the Pi 2 and 3.

* tag 'arm-soc/for-4.17/defconfig' of https://github.com/Broadcom/stblinux:
  ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3
  ARM: bcm2385_defconfig: Enable BT support for BCM43438
  ARM: multi_v7_defconfig: Enable serial console on RPi 3

Pull "This is the pxa changes for v4.17 cycle" from Robert Jarzmik:

 - minor changes for property API
 - clock API fix for ULPI driver warning

It exceptionally contains a merge from the mtd tree from Boris
to prevent any merge conflicts in the PXA tree.

* tag 'pxa-for-4.17' of https://github.com/rjarzmik/linux:
  ARM: pxa/raumfeld: use PROPERTY_ENTRY_U32() directly
  ARM: pxa: ulpi: fix ulpi timeout and slowpath warn
  ARM: pxa: cm-x300: remove inline directive
  ARM: pxa: fix static checker warning in pxa3xx-ulpi
  MAINTAINERS: remove entry for deleted pxa3xx_nand driver
  arm: dts: pxa: use reworked NAND controller driver
  dt-bindings: mtd: remove pxa3xx NAND controller documentation
  mtd: nand: remove useless fields from pxa3xx NAND platform data
  mtd: nand: remove deprecated pxa3xx_nand driver
  mtd: nand: use Marvell reworked NAND controller driver with all platforms

Merge tag 'at91-ab-4.17-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc

Pull "AT91 SoC for 4.17: from Alexandre Belloni:

 - Rename Atmel to Microhip in MAINTAINERS, Documentation and Kconfig

* tag 'at91-ab-4.17-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: Kconfig: Update company to Microchip
  Documentation: at91: Update Microchip SoC documentation
  MAINTAINERS: ARM: at91: update entry for ARM/Microchip

Pull "ARM64: hisilicon: defconfig updates for 4.17" from Wei Xu:

- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler

* tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi:
  arm64: defconfig: enable IOSCHED_DEADLINE

Enable Tegra BPMP thermal sensor support by default, built as a module.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable Tegra186 CPU frequency scaling support by default.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add basic MSL support for i.MX6SLL.

The i.MX 6SoloLiteLite application processors are NXP's latest
additions to a growing family of multimedia-focused products
offering high-performance processing optimized for lowest power
consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced
implementation of the ARM Cortex-A9 core, which can be interfaced
with LPDDR3 and LPDDR2 DRAM memory devices.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable the various CPUFREQ governors and statistics to ease development.
Don't change the default governor - performance governor.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Enable the driver for the TSENS IP that is present across several QCOM
SoCs.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

The APCS block is present on several Qualcomm SoCs e.g. 8916, 8996.  On the
8916 it is needed to enable the clock controller that in turn enables
cpufreq on the platform while on the 8996 it is needed for communication
with RPM.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Enable NVIDIA Tegra194 support in the default 64-bit ARM configuration.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Currently CONFIG_SND_SOC_WM8962 is selected via SND_SOC_IMX_WM8962
machine driver option.

SND_SOC_IMX_WM8962 will be removed in the next kernel cycle, so
select the codec driver directly so that it can still be used
by default via the generic fsl-asoc-card machine driver.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'samsung-soc-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung mach/soc changes for v4.17" from Krzysztof Kozłowski:

1. Add few remaining SPDX license identifiers.
2. Add cpuidle support to all Midas-based boards (including new
   GT-I9300/GT-I9305/GT-N7100/GT-N7105).

* tag 'samsung-soc-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: Extend cpuidle support to Midas boards
  ARM: EXYNOS: Add SPDX license identifiers

Merge tag 'omap-for-v4.17/ti-sysc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Driver changes for ti-sysc for v4.17" from Tony Lindgren:

This series of changes enables the use device tree based sysconfig
data for ti-sysc driver. As we already have SmartReflex data configured,
we use that as the first driver to enable. To do that in a way where
SmartReflex is not probed twice, we need to prepare the SmartReflex
driver before flipping dts data on for it in the last patch of the
series.

To avoid regressions, we are checking the passed dts data against
existing platform data since we still have it available. Then after the
dts files are converted, we can simply drop the related platform data
at some point in the future.

* tag 'omap-for-v4.17/ti-sysc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Enable ti-sysc to use device tree data for smartreflex
  PM / AVS: SmartReflex: Prepare to use device tree based probing
  ARM: OMAP2+: Try to parse earlycon from parent too
  ARM: OMAP2+: Add checks for device tree based sysconfig data
  ARM: OMAP2+: Add functions to allocate module data from device tree
  bus: ti-sysc: Handle some devices in omap_device compatible way
  bus: ti-sysc: Add support for platform data callbacks
  bus: ti-sysc: Remove unnecessary debugging statements
  bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init
  bus: ti-sysc: Handle stdout-path for debug console
  bus: ti-sysc: Add suspend and resume handling
  bus: ti-sysc: Add fck clock alias for children with notifier_block
  ARM: OMAP2+: Prepare to pass auxdata for smartreflex

Merge tag 'omap-for-v4.17/am-pm-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Add am335x and am437x PM code for v4.17" from Tony Lindgren:

This series of changes from Dave Gerlach adds the PM related
code to allow low-power suspend states. The code consists of
the SoC specific assembly code and a related PM driver.

* tag 'omap-for-v4.17/am-pm-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  soc: ti: Add pm33xx driver for basic suspend support
  ARM: OMAP2+: pm33xx-core: Add platform code needed for PM
  ARM: OMAP2+: Introduce low-level suspend code for AM43XX
  ARM: OMAP2+: Introduce low-level suspend code for AM33XX

Merge tag 'omap-for-v4.17/timer-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Move omap timer to drivers for 4.17" from Tony Lindgren:

This series from Keerthy and Ladislav Michl move omap dmtimer code
to drivers. As we don't want to export custom timer functions to
random drivers, we also need to update the related PWM driver to
pass the timer specific functions in platform data.

Note that this series is based on a merge of omap1 specific timer
fix and omap2+ platform data clean-up to keep things working and
make the move a bit simpler.

* tag 'omap-for-v4.17/timer-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  clocksource: timer-ti-dm: Check prescaler value
  clocksource: timer-ti-dm: Consolidate set source
  clocksource: timer-ti-dm: Make unexported functions static
  ARM: OMAP: pdata-quirks: Remove unused timer pdata
  pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops
  clocksource: timer-ti-dm: Hook device platform data if not already assigned
  clocksource: timer-ti-dm: Populate the timer ops to the pdata
  clocksource: timer-ti-dm: Add timer ops to the platform data structure
  ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
  clocksource: timer-ti-dm: Replace architecture
  ARM: OMAP: Move dmtimer.h out of plat-omap
  ARM: OMAP: timer: Wrap the inline functions under OMAP2PLUS define
  ARM: OMAP: dmtimer: Remove all the exports
  ARM: OMAP: Fix dmtimer init for omap1

Merge tag 'omap-for-v4.17/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "SoC changes for omaps for v4.17" from Tony Lindgren:

This series is mostly a series from Suman Anna to remove now unused
platform data that is now coming from device tree. This also make it
a bit simpler to move the timer code to live under drivers in a
separate series of patches. There are also few minor clean-ups for
omap4 PM code.

* tag 'omap-for-v4.17/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix typo for wakeup_ns_pa_addr
  ARM: OMAP2+: Use v7_invalidate_l1 in omap4_finish_suspend
  ARM: OMAP2+: Remove unused gpio header file references
  ARM: OMAP: Move plat/i2c.h into mach-omap1 folder
  ARM: OMAP2+: Cleanup omap_mcbsp_dev_attr and other legacy data
  ARM: OMAP2+: Cleanup omap2_spi_dev_attr and other legacy data
  ARM: OMAP2+: Cleanup omap_timer_capability_dev_attr usage
  ARM: OMAP2+: Cleanup omap_i2c_dev_attr usage
  ARM: OMAP2+: Cleanup omap_gpio_dev_attr usage
  ARM: OMAP2+: Include types.h directly for hwmod data

Merge tag 'stm32-defconfig-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc

Pull "STM32 defconfig updates for v4.17, round 1" from Alexandre Torgue:

Highlights:
----------
 -Add STM32 support (for MPU) to multi-v7-defconfig
 -Enable MMCI and EXT3_FS support

Merge tag 'stm32-soc-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc

Pull "STM32 SOC updates for v4.17, round 1." from Alexandre Torgue:

Highlights:
----------
 -Add STM32F769 MCU support
 -Add STM32MP157 MPU support
 -Add AMBA PL180 MMCI support for F4 and F7 MCUs
 -Move STM32 documentation to rst format

* tag 'stm32-soc-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: stm32: restore reboot capabilities
  ARM: stm32: Add AMBA support for STM32F4 and STM32F7 SoCs
  ARM: stm32: add initial support for STM32MP157
  ARM: stm32: prepare stm32 family to welcome armv7 architecture
  Documentation: arm: stm32: move to rst format
  ARM: stm32: Fix copyright
  ARM: stm32: add new STM32F769 MCU
  ARM: stm32: Kconfig: introduce MACH_STM32F769 flag

Add Spreadtrum's maintainer entry and Orson, Baolin and me
as maintainers.

Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>