Make sure all resources are initialized before interrupt handler is
registered. Pass full platform device name to request_irq() so it
can be distinguished which device has requested an interrupt in cases
there are multiple instances in the system.

Also enable voltage regulators regardless of they have been enabled
by bootloader or not, to make sure other drivers using same regulators
don't disable them unexpectedly.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Use proper PM ops from struct dev_pm_ops rather than the deprecated ones.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Latest SuperH HDMI uses not only HDMI Core Register (HTOP0)
but also HDMI Control Register (HTOP1).
This patch adds HDMI Control Register support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Latest SuperH HDMI allows 32bit access only.
But the data is 8bit. So, we can keep compatibility by switching 8/32 bit access.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

MIPI DSI uses 1.1v regulator, so change its supply name.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch uses pr_debug instead of printk to allow dynamic debugging.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Remove unnecessary headers from the file.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Release bridge, as done on all other paths out of the function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

When exynos_mipi_update_cfg() is called, mipi dsi registers were become
sw reset. So, It needs to enable interrupt again.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch fixes max loop count in EQ(Channel Equalization) sequence
of link training. According to DP(displayport) specification,
the max loop count in this sequence should be 5.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch replaces the code for getting an number from a
userspace buffer by a simple call to kstrou8_from_user.
This makes it easier to read and less error prone.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

SiS_DRAMType is const and only used by sisfb_post_300_rwtest which is
marked __devinit we can annotate SiS_DRAMType with __devinitconst and
move it into the file scope in order to not have it created on the
stack.
This patch decreases the compiled module size by about 100bytes.

And since hardcoded values are bad we use ARRAY_SIZE for determining
the size of SiS_DRAMType ;)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch removes the unused structs SiS_SDRDRAM_TYPE and SiS_DDRDRAM_TYPE
from init.h

These are not used anywhere so we can delete them.

The SiS_DRAMType is identically defined in sis_main.c and only used
there so we can remove it here.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Functions not referenced outside of a source file should be marked
static to prevent them from being exposed globally.

Quiets the sparse warnings:

warning: symbol 'mb862xx_intr' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Functions not referenced outside of a source file should be marked
static to prevent them from being exposed globally.

Quiets the sparse warnings:

warning: symbol 'mb862xx_i2c_stop' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Functions not referenced outside of a source file should be marked
static to prevent them from being exposed globally.

Quiets the sparse warning:

warning: symbol 'fb_deferred_io_page' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Jaya Kumar <jayalk@intworks.biz>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Functions not referenced outside of a source file should be marked
static to prevent them from being exposed globally.

Quiets the sparse warnings:

warning: symbol 'ufx_handle_damage' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Since s3c_fb_missing_pixclock() is called from s3c_fb_set_rgb_timing()
which is used in the suspend/resume paths it can't be marked __devinit
as this could result in it being discarded after boot.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This controller not only supports higher resolutions than the K1900
but concurrent updates as well. This results in a generally higher
display speed.
Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This controller only supports smaller resolutions and only serial
updates, i.e. it has to wait for an update to finish before
starting another one.
Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

The AUO-K190X controllers share a very similar set of commands and
can therefore also share most of the driver code.
Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

With this optional callback the driver is notified when the first page
is entered into the pagelist and a new deferred_io call is scheduled.

A possible use-case for this is runtime-pm. In the first_io call
	pm_runtime_get()
could be called, which starts an asynchronous runtime_resume of the
device. In the deferred_io callback a call to
	pm_runtime_barrier()
makes the sure, the device is resumed by then and a
	pm_runtime_put()
may put the device back to sleep.

Also, some SoCs may use the runtime-pm system to determine if they
are able to enter deeper idle states. Therefore it is necessary to
keep the use-count from the first written page until the conclusion
of the screen update, to prevent the system from going to sleep before
completing the pending update.

Two users of defio were using kmalloc to allocate the structure.
These allocations are changed to kzalloc, to prevent uninitialised
.first_io members in those drivers.
Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Add support for LCD panel on MIPS SEAD-3 development platform.
Signed-off-by: Douglas Leung <douglas@mips.com>
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

The exynos_mipi_dsi_set_main_disp_[hv]porch() functions take front and
back porch arguments in that order. This maps to the fb_videomode
right/lower_margin and left/upper_margin respectively. Fix the caller
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Donghwa Lee <dh09.lee@samsung.com>

If there's some traffic on the LCD controller pads, the BootROM has trouble with
sampling the bootmode from these pads. The BootROM usually ends in a loop.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Chen Peter-B29397 <B29397@freescale.com>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Li Frank-B20596 <B20596@freescale.com>
Cc: Lin Tony-B19295 <B19295@freescale.com>
Cc: Linux FBDEV <linux-fbdev@vger.kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Subodh Nijsure <snijsure@grid-net.com>
Cc: Tony Lin <tony.lin@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

The test tested not the most recently allocated value but a previously
allocated one.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

There were two problems in this code: failure of the setup function should
free locally allocated resources like other nearby failures, and the test
if (&info->cmap) can never be false.  To generally clean things up, this
patch reorders the error handling code at the failed label and adds labels
so that the conditionals are not necessary.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

The change
    commit 461cbe77
    Author: Gregory Bean <gbean@codeaurora.org>
    Date:   Wed Jul 28 10:22:13 2010 -0700

        video: msm: Fix section mismatch in mddi.c.

fixes a section mismatch between the board file and the driver's probe
function, however, it misses the additional mismatches between the
probe function and some routines it calls.  Fix these up as well.
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch adds analog and pll control setting. This control setting
is used for DP TX PHY block to set the values as below. It is beneficial
to improve analog characteristics.
 - TX terminal registor is 50 Ohm.
 - Reference clock of PHY is 24 MHz.
 - Power source for TX digital logic is 1.0625 V.
 - Power source for internal clock driver is 1.0625 V.
 - PLL VCO range setting is 600 uA.
 - Power down ring osc is turned off.
 - AUX terminal resistor is 50 Ohm.
 - AUX channel current is 8 mA and multiplied by 2.
 - TX channel output amplitude is 400 mV.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

The char pointer for adjust_request variable is replaced with char array
to fix possible null pointer dereference when clock recovery is failed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

DP PLL Lock status should be checked in order to  prevent unlocked PLL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch adds runtime_get/put to suspend/resume, which should be
necessary to prevent the problem to access the fimd register
without block power on.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

Signed-off-by: Alexander Guy <alexander.guy@guy-engineering.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

If wait_event_interruptible_timeout returns a positive value, it means
the condition evaluated is true. Which means priv->shared->hw_running is false.
And then we will exit the loop.

This patch simplifies the logic to exit the while loop.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

For all the Samsung SoC based boards which have the platform data for
s3c-fb driver, the 'default_win' element in the platform data is removed
and the lcd panel video timing values are moved out of individual window
configuration data.
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: JeongHyeon Kim <jhkim@insignal.co.kr>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

The display controller window data should contain window configuration data
for only one type of lcd panel. So, for real6410 and mini6410 boards, split
the existing display controller window data, which contains window
configuration data for two different types of lcd panels, into two seperate
instances and register one of them depending on the type of the lcd panel
detected at runtime.

This is a prerequisite change for a subsequent commit that reorders the
platform data of display controller by moving video interface timing out
of window setup data.

Cc: Darius Augulis <augulis.darius@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

The decision to enable or disable the data output to the lcd panel from
the controller need not be based on the value of 'default_win' element
in the platform data. Instead, the data output to the panel is enabled
if any of the windows are active, else data output is disabled.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>