- 06 Apr, 2013 1 commit
-
-
Hannes Frederic Sowa authored
This change brings netfilter reassembly logic on par with reassembly.c. The corresponding change in net-next is (eec2e618 ipv6: implement RFC3168 5.3 (ecn protection) for ipv6 fragmentation handling) Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 05 Apr, 2013 10 commits
-
-
Pablo Neira Ayuso authored
Now that this supports net namespace for nflog and nfqueue, we can remove the global proc_net_netfilter which has no clients anymore. Based on patch from Gao feng. Signed-off-by: -
Gao feng authored
This patch makes /proc/net/netfilter/nfnetlink_queue pernet. Moreover, there's a pernet instance table and lock. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Gao feng authored
After this patch, all nf_loggers support net namespace. Still xt_LOG and ebt_log require syslog netns support. Signed-off-by:
-
Gao feng authored
This patch makes /proc/net/netfilter/nfnetlink_log pernet. Moreover, there's a pernet instance table and lock. Signed-off-by:
-
Gao feng authored
Add pernet support to ipt_ULOG by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). This patch also make ulog_buffers and netlink socket nflognl per netns. Signed-off-by:
-
Gao feng authored
Add pernet support to ebt_ulog by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). This patch also make ulog_buffers and netlink socket ebtulognl per netns. Signed-off-by:
-
Gao feng authored
Add pernet support to xt_LOG by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). Since syslog ns has yet not been implemented, we don't want the containers to DDOS host's syslogd. So only enable ebt_log only from init_net and wait for syslog ns support Signed-off-by:
-
Gao feng authored
Add pernet support to ebt_log by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). Since syslog ns has yet not been implemented, we don't want the containers to DDOS host's syslogd. So only enable ebt_log only from init_net and wait for syslog ns support. Signed-off-by:
-
Gao feng authored
This patch adds netns support to nf_log and it prepares netns support for existing loggers. It is composed of four major changes. 1) nf_log_register has been split to two functions: nf_log_register and nf_log_set. The new nf_log_register is used to globally register the nf_logger and nf_log_set is used for enabling pernet support from nf_loggers. Per netns is not yet complete after this patch, it comes in separate follow up patches. 2) Add net as a parameter of nf_log_bind_pf. Per netns is not yet complete after this patch, it only allows to bind the nf_logger to the protocol family from init_net and it skips other cases. 3) Adapt all nf_log_packet callers to pass netns as parameter. After this patch, this function only works for init_net. 4) Make the sysctl net/netfilter/nf_log pernet. Signed-off-by:
-
Gao feng authored
This patch makes this proc dentry pernet. So far only init_net had a /proc/net/netfilter directory. Signed-off-by:
-
- 02 Apr, 2013 1 commit
-
-
Michal Kubeček authored
Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
- 01 Apr, 2013 28 commits
-
-
holger@eitzenberger.org authored
Because rev1 and rev3 of the target share the same hashing generalize it by introduing nfqueue_hash(). Signed-off-by:
Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by:
-
holger@eitzenberger.org authored
Current NFQUEUE target uses a hash, computed over source and destination address (and other parameters), for steering the packet to the actual NFQUEUE. This, however forgets about the fact that the packet eventually is handled by a particular CPU on user request. If E. g. 1) IRQ affinity is used to handle packets on a particular CPU already (both single-queue or multi-queue case) and/or 2) RPS is used to steer packets to a specific softirq the target easily chooses an NFQUEUE which is not handled by a process pinned to the same CPU. The idea is therefore to use the CPU index for determining the NFQUEUE handling the packet. E. g. when having a system with 4 CPUs, 4 MQ queues and 4 NFQUEUEs it looks like this: +-----+ +-----+ +-----+ +-----+ |NFQ#0| |NFQ#1| |NFQ#2| |NFQ#3| +-----+ +-----+ +-----+ +-----+ ^ ^ ^ ^ | |NFQUEUE | | + + + + +-----+ +-----+ +-----+ +-----+ |rx-0 | |rx-1 | |rx-2 | |rx-3 | +-----+ +-----+ +-----+ +-----+ The NFQUEUEs not necessarily have to start with number 0, setups with less NFQUEUEs than packet-handling CPUs are not a problem as well. This patch extends the NFQUEUE target to accept a new NFQ_FLAG_CPU_FANOUT flag. If this is specified the target uses the CPU index for determining the NFQUEUE being used. I have to introduce rev3 for this. The 'flags' are folded into _v2 'bypass'. By changing the way which queue is assigned, I'm able to improve the performance if the processes reading on the NFQUEUs are pinned correctly. Signed-off-by: -
Gao feng authored
Signed-off-by:
-
Julian Anastasov authored
We used a global BH disable in LOCAL_OUT hook. Add _bh suffix to all places that need it and remove the disabling from LOCAL_OUT and sync code. Functions like ip_defrag need protection from BH, so add it. As for nf_nat_mangle_tcp_packet, it needs RCU lock. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au>
-
Julian Anastasov authored
This is the final step in RCU conversion. Things that are removed: - svc->usecnt: now svc is accessed under RCU read lock - svc->inc: and some unused code - ip_vs_bind_pe and ip_vs_unbind_pe: no ability to replace PE - __ip_vs_svc_lock: replaced with RCU - IP_VS_WAIT_WHILE: now readers lookup svcs and dests under RCU and work in parallel with configuration Other changes: - before now, a RCU read-side critical section included the calling of the schedule method, now it is extended to include service lookup - ip_vs_svc_table and ip_vs_svc_fwm_table are now using hlist - svc->pe and svc->scheduler remain to the end (of grace period), the schedulers are prepared for such RCU readers even after done_service is called but they need to use synchronize_rcu because last ip_vs_scheduler_put can happen while RCU read-side critical sections use an outdated svc->scheduler pointer - as planned, update_service is removed - empty services can be freed immediately after grace period. If dests were present, the services are freed from the dest trash code Signed-off-by:
-
Julian Anastasov authored
In previous commits the schedulers started to access svc->destinations with _rcu list traversal primitives because the IP_VS_WAIT_WHILE macro still plays the role of grace period. Now it is time to finish the updating part, i.e. adding and deleting of dests with _rcu suffix before removing the IP_VS_WAIT_WHILE in next commit. We use the same rule for conns as for the schedulers: dests can be searched in RCU read-side critical section where ip_vs_dest_hold can be called by ip_vs_bind_dest. Some things are not perfect, for example, calling functions like ip_vs_lookup_dest from updating code under RCU, just because we use some function both from reader and from updater. Signed-off-by:
-
Julian Anastasov authored
As all read_locks are gone spin lock is preferred. Signed-off-by:
-
Julian Anastasov authored
This method releases the scheduler state, it can not fail. Such change will help to properly replace the scheduler in following patch. Signed-off-by:
-
Julian Anastasov authored
All dests will go to trash, no exceptions. But we have to use new list node t_list for this, due to RCU changes in following patches. Dests will wait there initial grace period and later all conns and schedulers to put their reference. The dests don't get reference for staying in dest trash as before. As result, we do not load ip_vs_dest_put with extra checks for last refcnt and the schedulers do not need to play games with atomic_inc_not_zero while selecting best destination. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. As the weight for some dest can be reduced during dest selection, change the algorithm to check weights by using minimum weights in the 1 .. max_weight-(di-1) range, with the same step (di). By this way we ensure that there will be always a weight >= 1 check before claiming that all destinations are overloaded. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. Signed-off-by:
-
Julian Anastasov authored
Use the 3 new methods to reassign dests. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. As the previous entry could be unlinked, limit the list traversals to 2 when lookup started from previous entry. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. The read_lock for sched_lock is removed. The set.lock is removed because now it is used in rare cases, mostly under sched_lock. Signed-off-by:
-
Julian Anastasov authored
The schedule method now needs _rcu list-traversal primitive for svc->destinations. The read_lock for sched_lock is removed. Use a dead flag to prevent new entries to be created while scheduler is reclaimed. Use hlist for the hash table. Signed-off-by:
-
Julian Anastasov authored
Use the new add_dest and del_dest methods to reassign dests. Signed-off-by:
-
Julian Anastasov authored
ip_vs_dest_hold will be used under RCU lock while ip_vs_dest_put can be called even after dest is removed from service, as it happens for conns and some schedulers. Signed-off-by:
-
Julian Anastasov authored
Allow schedulers to use rcu_dereference when returning destination on lookup. The RCU read-side critical section will allow ip_vs_bind_dest to get dest refcnt as preparation for the step where destinations will be deleted without an IP_VS_WAIT_WHILE guard that holds the packet processing during update. Add new optional scheduler methods add_dest, del_dest and upd_dest. For now the methods are called together with update_service but update_service will be removed in a following change. Signed-off-by:
-
Julian Anastasov authored
The global list with schedulers ip_vs_schedulers is accessed only from user context - configuration and scheduler module [un]registration. Use ip_vs_sched_mutex instead. Signed-off-by:
-
Julian Anastasov authored
We have many fields to set and few to reset, use kmem_cache_alloc instead to save some cycles. Signed-off-by:
-
Julian Anastasov authored
__ip_vs_conn_in_get and ip_vs_conn_out_get are hot places. Optimize them, so that ports are matched first. By moving net and fwmark below, on 32-bit arch we can fit caddr in 32-byte cache line and all addresses in 64-byte cache line. Signed-off-by:
-
Julian Anastasov authored
Convert __ip_vs_conntbl_lock_array as follows: - readers that do not modify conn lists will use RCU lock - updaters that modify lists will use spinlock_t Now for conn lookups we will use RCU read-side critical section. Without using __ip_vs_conn_get such places have access to connection fields and can dereference some pointers like pe and pe_data plus the ability to update timer expiration. If full access is required we contend for reference. We add barrier in __ip_vs_conn_put, so that other CPUs see the refcnt operation after other writes. With the introduction of ip_vs_conn_unlink() we try to reorganize ip_vs_conn_expire(), so that unhashing of connections that should stay more time is avoided, even if it is for very short time. Signed-off-by:
-
Julian Anastasov authored
Allow the readers to use RCU lock and for PE module registrations use global mutex instead of spinlock. All PE modules need to use synchronize_rcu in their module exit handler. Signed-off-by:
-
Julian Anastasov authored
rs_lock was used to protect rs_table (hash table) from updaters (under global mutex) and readers (packet handlers). We can remove rs_lock by using RCU lock for readers. Reclaiming dest only with kfree_rcu is enough because the readers access only fields from the ip_vs_dest structure. Use hlist for rs_table. As we are now using hlist_del_rcu, introduce in_rs_table flag as replacement for the list_empty checks which do not work with RCU. It is needed because only NAT dests are in the rs_table. Signed-off-by:
-
Julian Anastasov authored
We use locks like tcp_app_lock, udp_app_lock, sctp_app_lock to protect access to the protocol hash tables from readers in packet context while the application instances (inc) are [un]registered under global mutex. As the hash tables are mostly read when conns are created and bound to app, use RCU for readers and reclaim app instance after grace period. Simplify ip_vs_app_inc_get because we use usecnt only for statistics and rely on module refcounting. Signed-off-by:
-
