- 14 Oct, 2010 1 commit
-
-
Kumar Gala authored
The following commit broke 83xx because it assumed the 83xx platforms exposed the "IMMR" address in BAR0 like the 85xx/86xx/QoriQ devices do: commit 3da34aae Author: Kumar Gala <galak@kernel.crashing.org> Date: Tue May 12 15:51:56 2009 -0500 powerpc/fsl: Support unique MSI addresses per PCIe Root Complex However that is not true, so we have to search through the inbound window settings on 83xx to find which one matches the IMMR address to determine its PCI address. Reported-by:
Ilya Yanok <yanok@emcraft.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 13 Oct, 2010 18 commits
-
-
matt mooney authored
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y. Signed-off-by:
matt mooney <mfm@muteddisk.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Arnd Bergmann authored
The default for llseek is changing, so we need explicit operations everywhere. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by:
-
Nishanth Aravamudan authored
Current firmware only allows us to send IRQs to the first processor or all processors. We currently check to see if the passed in mask is equal to the all_mask, but the firmware is only considering whether the request is for the equivalent of the possible_mask. Thus, we think the request is for some subset of CPUs and only assign IRQs to the first CPU (on systems without irqbalance running) as evidenced by /proc/interrupts. By using possible_mask instead, we account for this and proper interleaving of interrupts occurs. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Nishanth Aravamudan authored
Use set_dma_ops and remove unused oddly-named temp pointer sd. Signed-off-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Nishanth Aravamudan authored
While looking at some code paths I came across this code that zeros memory then copies over the entire length. Signed-off-by:
-
Nishanth Aravamudan authored
Release the TCE table as the XXX suggests, except on FW_FEATURE_ISERIES, where the tables are allocated globally and reused. Signed-off-by:
-
Nishanth Aravamudan authored
The kernel doc for device_register (and device_initialize) very clearly state to call put_device not kfree after calling, even on error. Signed-off-by:
-
Nishanth Aravamudan authored
The current check is wrong because it does not take the DMA offset intot account, and in the case of a driver which doesn't actually support 64bits would falsely report that device as working. Signed-off-by:
-
Nishanth Aravamudan authored
The table offset is in entries, each of which imply a dma address of an IOMMU page. Also, we should check the device can reach the whole IOMMU table. Signed-off-by:
-
Nishanth Aravamudan authored
BUID_HI and BUID_LO are used to pass data to call_rtas, which expects ints or u32s. But the macro doesn't cast the return, so the result is still u64. Use the upper_32_bits and lower_32_bits macros that have been added to kernel.h. Found by getting printf format errors trying to debug print the args, no actual code change for 64 bit kernels where the macros are actually used. Signed-off-by:
Linas Vepstas <linasvepstas@gmail.com> Signed-off-by:
-
Julia Lawall authored
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Julia Lawall authored
In this case, a device_node structure is stored in another structure that is then freed without first decrementing the reference count of the device_node structure. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression x; identifier f; position p1,p2; @@ x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...); ... when != of_node_put(x) kfree@p2(x) @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("call",p1) cocci.print_secs("free",p2) // </smpl> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Nathan Fontenot authored
Enable partition migration in the kernel. To do this a new sysfs file, /sys/kernel/mobility/migration, is created. In order to initiate a migration the stream id (generated by the HMC managing the system) is written to this file. After a migration occurs, and what is the majority of this code, the device tree needs to be updated for the new system the partition is running on. This is done via the ibm,update-nodes and ibm,update-properties rtas calls which return information regarding which nodes and properties of the device tree are to be added/removed/updated. Signed-off-by:
Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by:
-
Nathan Fontenot authored
Export the rtas_ibm_suspend_me() routine. This is needed to perform partition migration in the kernel. Signed-off-by:
-
Nathan Fontenot authored
Export routines associated with adding and removing device tree nodes on pseries needed for device tree updating. Signed-off-by:
-
Benjamin Herrenschmidt authored
-
- 08 Oct, 2010 1 commit
-
-
Kumar Gala authored
arch/powerpc/platforms/built-in.o:(.toc1+0x18): undefined reference to `__early_start' This is due to the 85xx/smp.c not handling the 64-bit side properly. We need to set the entry point for secondary cores on ppc64e to generic_secondary_smp_init instead of __early_start that we due on ppc32. Signed-off-by:
-
- 07 Oct, 2010 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6Linus Torvalds authored
* 'hwpoison-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: HWPOISON: Stop shrinking at right page count HWPOISON: Report correct address granuality for AO huge page errors HWPOISON: Copy si_addr_lsb to user page-types.c: fix name of unpoison interface
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: elevator: fix oops on early call to elevator_change()
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: check return code of read_sb_page md/raid1: minor bio initialisation improvements. md/raid1: avoid overflow in raid1 resync when bitmap is in use.
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: don't drop handle reference on unload drm/ttm: Fix two race conditions + fix busy codepaths
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix runtime PM related deadlock Input: joydev - fix JSIOCSAXMAP ioctl Input: uinput - setup MT usage during device creation
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: properly account for reclaimed inodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (37 commits) V4L/DVB: v4l: radio: si470x: fix unneeded free_irq() call V4L/DVB: v4l: videobuf: prevent passing a NULL to dma_free_coherent() V4L/DVB: ir-core: Fix null dereferences in the protocols sysfs interface V4L/DVB: v4l: s5p-fimc: Fix 3-planar formats handling and pixel offset error on S5PV210 SoCs V4L/DVB: v4l: s5p-fimc: Fix return value on probe() failure V4L/DVB: uvcvideo: Restrict frame rates for Chicony CNF7129 webcam V4L/DVB: uvcvideo: Fix support for Medion Akoya All-in-one PC integrated webcam V4L/DVB: ivtvfb: prevent reading uninitialized stack memory V4L/DVB: cx25840: Fix typo in volume control initialization: 65335 vs. 65535 V4L/DVB: v4l: mem2mem_testdev: add missing release for video_device V4L/DVB: v4l: mem2mem_testdev: fix errorenous comparison V4L/DVB: mt9v022.c: Fixed compilation warning V4L/DVB: mt9m111: added current colorspace at g_fmt V4L/DVB: mt9m111: cropcap and s_crop check if type is VIDEO_CAPTURE V4L/DVB: mx2_camera: fix a race causing NULL dereference V4L/DVB: tm6000: bugfix data handling V4L/DVB: gspca - sn9c20x: Bad transfer size of Bayer images V4L/DVB: videobuf-dma-sg: set correct size in last sg element V4L/DVB: cx231xx: Avoid an OOPS when card is unknown (card=0) V4L/DVB: dvb: fix smscore_getbuffer() logic ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: of/i2c: Fix module load order issue caused by of_i2c.c i2c: Fix checks which cause legacy suspend to never get called i2c-pca: Fix waitforcompletion() return value i2c: Fix for suspend/resume issue i2c: Remove obsolete cleanup for clientdata
-
Eric Dumazet authored
When proc_doulongvec_minmax() is used with an array of longs, and no min/max check requested (.extra1 or .extra2 being NULL), we dereference a NULL pointer for the second element of the array. Noticed while doing some changes in network stack for the "16TB problem" Fix is to not change min & max pointers in __do_proc_doulongvec_minmax(), so that all elements of the vector share an unique min/max limit, like proc_dointvec_minmax(). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kyungmin Park authored
Add Samsung S5P series FIMC(Camera Interface) maintainers. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrew Morton authored
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by:
-
Kirill A. Shutemov authored
We need to check parent's thresholds if parent has use_hierarchy == 1 to be sure that parent's threshold events will be triggered even if parent itself is not active (no MEM_CGROUP_EVENTS). Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Robin Holt authored
During boot of a 16TB system, the following is printed: Dentry cache hash table entries: -2147483648 (order: 22, 17179869184 bytes) Signed-off-by:
Robin Holt <holt@sgi.com> Reviewed-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Andi Kleen authored
When we call the slab shrinker to free a page we need to stop at page count one because the caller always holds a single reference, not zero. This avoids useless looping over slab shrinkers and freeing too much memory. Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com>
-
Andi Kleen authored
The SIGBUS user space signalling is supposed to report the address granuality of a corruption. Pass this information correctly for huge pages by querying the hpage order. Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
-
Andi Kleen authored
The original hwpoison code added a new siginfo field si_addr_lsb to pass the granuality of the fault address to user space. Unfortunately this field was never copied to user space. Fix this here. I added explicit checks for the MCEERR codes to avoid having to patch all potential callers to initialize the field. Signed-off-by: -
Naoya Horiguchi authored
The page-types utility still uses an out of date name for the unpoison interface: debugfs:hwpoison/renew-pfn This patch renames and fixes it. Signed-off-by:
-
Jens Axboe authored
2.6.36 introduces an API for drivers to switch the IO scheduler instead of manually calling the elevator exit and init functions. This API was added since q->elevator must be cleared in between those two calls. And since we already have this functionality directly from use by the sysfs interface to switch schedulers online, it was prudent to reuse it internally too. But this API needs the queue to be in a fully initialized state before it is called, or it will attempt to unregister elevator kobjects before they have been added. This results in an oops like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000051 IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 PGD 47ddfc067 PUD 47c6a1067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq CPU 2 Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R RIP: 0010:[<ffffffff8116f15e>] [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 RSP: 0018:ffff88027da25d08 EFLAGS: 00010246 RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000 RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88 RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0 R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528 FS: 00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090) Stack: ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88 <0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77 <0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528 Call Trace: [<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0 [<ffffffff8123fd98>] kobject_add_varg+0x38/0x60 [<ffffffff8123feb9>] kobject_add+0x69/0x90 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0 [<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0 [<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0 [<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0 [<ffffffff81224204>] elv_register_queue+0x34/0xa0 [<ffffffff81224aad>] elevator_change+0xfd/0x250 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t] [<ffffffffa007e000>] ? t_init+0x0/0x361 [t] [<ffffffffa007e0a8>] t_init+0xa8/0x361 [t] [<ffffffff810001de>] do_one_initcall+0x3e/0x170 [<ffffffff8108c3fd>] sys_init_module+0xbd/0x220 [<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6 RIP [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 RSP <ffff88027da25d08> CR2: 0000000000000051 ---[ end trace a6541d3bf07945df ]--- Fix this by adding a registered bit to the elevator queue, which is set when the sysfs kobjects have been registered. Signed-off-by:Jens Axboe <jaxboe@fusionio.com>
-
Dave Airlie authored
since the handle references are all tied to a file_priv, and when it disappears all the handle refs go with it. The fbcon ones we'd only notice on unload, but the nouveau notifier one would would happen on reboot. nouveau: Reported-by: Marc Dionne <marc.c.dionne@gmail.com> nouveau: Tested-by: Marc Dionne <marc.c.dionne@gmail.com> i915 unload: Reported-by: Keith Packard <keithp@keithp.com> Acked-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Johannes Weiner authored
When marking an inode reclaimable, a per-AG counter is increased, the inode is tagged reclaimable in its per-AG tree, and, when this is the first reclaimable inode in the AG, the AG entry in the per-mount tree is also tagged. When an inode is finally reclaimed, however, it is only deleted from the per-AG tree. Neither the counter is decreased, nor is the parent tree's AG entry untagged properly. Since the tags in the per-mount tree are not cleared, the inode shrinker iterates over all AGs that have had reclaimable inodes at one point in time. The counters on the other hand signal an increasing amount of slab objects to reclaim. Since "70e60ce7 xfs: convert inode shrinker to per-filesystem context" this is not a real issue anymore because the shrinker bails out after one iteration. But the problem was observable on a machine running v2.6.34, where the reclaimable work increased and each process going into direct reclaim eventually got stuck on the xfs inode shrinking path, trying to scan several million objects. Fix this by properly unwinding the reclaimable-state tracking of an inode when it is reclaimed. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: stable@kernel.org Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Alex Elder <aelder@sgi.com>
-
