Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

It's not uncommon for some workloads to do a bunch of I/O to a file and
delete it just afterward. If knfsd has a cached open file however, then
the file may still be open when the dentry is unlinked. If the
underlying filesystem is nfs, then that could trigger it to do a
sillyrename.

On a REMOVE or RENAME scan the nfsd_file cache for open files that
correspond to the inode, and proactively unhash and put their
references. This should prevent any delete-on-last-close activity from
occurring, solely due to knfsd's open file cache.

This must be done synchronously though so we use the variants that call
flush_delayed_fput. There are deadlock possibilities if you call
flush_delayed_fput while holding locks, however. In the case of
nfsd_rename, we don't even do the lookups of the dentries to be renamed
until we've locked for rename.

Once we've figured out what the target dentry is for a rename, check to
see whether there are cached open files associated with it. If there
are, then unwind all of the locking, close them all, and then reattempt
the rename.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The raparms cache was set up in order to ensure that we carry readahead
information forward from one RPC call to the next. In other words, it
was set up because each RPC call was forced to open a struct file, then
close it, causing the loss of readahead information that is normally
cached in that struct file, and used to keep the page cache filled when
a user calls read() multiple times on the same file descriptor.

Now that we cache the struct file, and reuse it for all the I/O calls
to a given file by a given user, we no longer have to keep a separate
readahead cache.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Have nfs4_preprocess_stateid_op pass back a nfsd_file instead of a filp.
Since we now presume that the struct file will be persistent in most
cases, we can stop fiddling with the raparms in the read code. This
also means that we don't really care about the rd_tmp_file field
anymore.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Have them keep an nfsd_file reference instead of a struct file.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Use cached filps if possible instead of opening a new one every time.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Currently, NFSv2/3 reads and writes have to open a file, do the read or
write and then close it again for each RPC. This is highly inefficient,
especially when the underlying filesystem has a relatively slow open
routine.

This patch adds a new open file cache to knfsd. Rather than doing an
open for each RPC, the read/write handlers can call into this cache to
see if there is one already there for the correct filehandle and
NFS_MAY_READ/WRITE flags.

If there isn't an entry, then we create a new one and attempt to
perform the open. If there is, then we wait until the entry is fully
instantiated and return it if it is at the end of the wait. If it's
not, then we attempt to take over construction.

Since the main goal is to speed up NFSv2/3 I/O, we don't want to
close these files on last put of these objects. We need to keep them
around for a little while since we never know when the next READ/WRITE
will come in.

Cache entries have a hardcoded 1s timeout, and we have a recurring
workqueue job that walks the cache and purges any entries that have
expired.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Allow knfsd to flush the delayed fput list so that it can ensure the
cached struct file is closed before it is unlinked.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The knfsd file cache will need to detect when files are unlinked, so that
it can close the associated cached files. Export a minimal set of notifier
functions to allow it to do so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

With the new file caching infrastructure in nfsd, we can end up holding
files open for an indefinite period of time, even when they are still
idle. This may prevent the kernel from handing out leases on the file,
which is something we don't want to block.

Fix this by running a SRCU notifier call chain whenever on any
lease attempt. nfsd can then purge the cache for that inode before
returning.

Since SRCU is only conditionally compiled in, we must only define the
new chain if it's enabled, and users of the chain must ensure that
SRCU is enabled.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

When the exports table is changed, exportfs will usually write a new
time to the "flush" file in the nfsd.export cache procfile. This tells
the kernel to flush any entries that are older than that value.

This gives us a mechanism to tell whether an unexport might have
occurred. Add a new ->flush cache_detail operation that is called after
flushing the cache whenever someone writes to a "flush" file.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Use a wait-free mechanism for managing the svc_rdma_recv_ctxts free
list. Subsequently, sc_recv_lock can be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Clean up: the system workqueue will work just as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

"cb" is never actually NULL in these functions.

On a quick skim of the history, they seem to have been there from the
beginning.  I'm not sure if they originally served a purpose.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

These are some nfsd bugfixes that I also want in the main branch that
will be submitted for the 5.4 merge window.

reply_cache_stats uses wrong parameter as seq file private structure and
thus causes the following kernel crash when users read
/proc/fs/nfsd/reply_cache_stats

BUG: kernel NULL pointer dereference, address: 00000000000001f9
PGD 0 P4D 0
Oops: 0000 [#3] SMP PTI
CPU: 6 PID: 1502 Comm: cat Tainted: G      D           5.3.0-rc3+ #1
Hardware name: Intel Corporation Broadwell Client platform/Basking Ridge, BIOS BDW-E2R1.86C.0118.R01.1503110618 03/11/2015
RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0
Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00
RSP: 0018:ffffaa520106fe08 EFLAGS: 00010246
RAX: 000000cfe1a77123 RBX: 0000000000000000 RCX: 0000000000291b46
RDX: 000000cf00000000 RSI: 0000000000000006 RDI: 0000000000291b28
RBP: ffffaa520106fe20 R08: 0000000000000006 R09: 000000cfe17e55dd
R10: ffffa424e47c0000 R11: 000000000000030b R12: 0000000000000001
R13: ffffa424e5697000 R14: 0000000000000001 R15: ffffa424e5697000
FS:  00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0
Call Trace:
 seq_read+0x194/0x3e0
 __vfs_read+0x1b/0x40
 vfs_read+0x95/0x140
 ksys_read+0x61/0xe0
 __x64_sys_read+0x1a/0x20
 do_syscall_64+0x4d/0x120
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f805728b861
Code: fe ff ff 50 48 8d 3d 86 b4 09 00 e8 79 e0 01 00 66 0f 1f 84 00 00 00 00 00 48 8d 05 d9 19 0d 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 c3 66 0f 1f 44 00 00 48 83 ec 28 48 89 54
RSP: 002b:00007ffea1ce3c38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f805728b861
RDX: 0000000000020000 RSI: 00007f8057183000 RDI: 0000000000000003
RBP: 00007f8057183000 R08: 00007f8057182010 R09: 0000000000000000
R10: 0000000000000022 R11: 0000000000000246 R12: 0000559a60e8ff10
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
Modules linked in:
CR2: 00000000000001f9
---[ end trace 01613595153f0cba ]---
RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0
Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00
RSP: 0018:ffffaa52004b3e08 EFLAGS: 00010246
RAX: 0000002bab45a7c6 RBX: 0000000000000000 RCX: 0000000000291b4c
RDX: 0000002b00000000 RSI: 0000000000000004 RDI: 0000000000291b28
RBP: ffffaa52004b3e20 R08: 0000000000000004 R09: 0000002bab1c8c7a
R10: ffffa424e5500000 R11: 00000000000002a9 R12: 0000000000000001
R13: ffffa424e4475000 R14: 0000000000000001 R15: ffffa424e4475000
FS:  00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0
Killed

Fixes: 3ba75830 ("nfsd4: drc containerization")
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

A process could race in an open and attempt to read one of these files
before i_private is initialized, and get a spurious error.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

synchronize_rcu() gets called multiple times each time a client is
destroyed.  If the laundromat thread has a lot of clients to destroy,
the delay can be noticeable.  This was causing pynfs test RENEW3 to
fail.

We could embed an rcu_head in each inode and do the kref_put in an rcu
callback.  But simplest is just to take a lock here.

(I also wonder if the laundromat thread would be better replaced by a
bunch of scheduled work or timers or something.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

syzbot is reporting that nfsd_mkdir() forgot to remove dentry created by
d_alloc_name() when __nfsd_mkdir() failed (due to memory allocation fault
injection) [1].

[1] https://syzkaller.appspot.com/bug?id=ce41a1f769ea4637ebffedf004a803e8405b4674Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+2c95195d5d433f6ed6cb@syzkaller.appspotmail.com>
Fixes: e8a79fb1 ("nfsd: add nfsd/clients directory")
[bfields: clean up in nfsd_mkdir instead of __nfsd_mkdir]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The sunrpc cache interface is susceptible to being fooled by a rogue
process just reading a 'channel' file.  If this happens the kernel
may think a valid daemon exists to service the cache when it does not.
For example, the following may fool the kernel:
cat /proc/net/rpc/auth.unix.gid/channel

Change the tracking of readers to writers when considering whether a
listener exists as all valid daemon processes either open a channel
file O_RDWR or O_WRONLY.  While this does not prevent a rogue process
from "stealing" a message from the kernel, it does at least improve
the kernels perception of whether a valid process servicing the cache
exists.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull structleak fix from Kees Cook:
 "Disable gcc-based stack variable auto-init under KASAN (Arnd
  Bergmann).

  This fixes a bunch of build warnings under KASAN and the
  gcc-plugin-based stack auto-initialization features (which are
  arguably redundant, so better to let KASAN control this)"

* tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK

Merge tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - add compile_commands.json to .gitignore

 - fix false-positive warning from gen_compile_commands.py after
   allnoconfig build

 - remove unused code

* tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove unused single-used-m
  gen_compile_commands: lower the entry count threshold
  .gitignore: Add compilation database file
  kbuild: remove unused objectify macro

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc2 to resolve
  some reported issues.

  Nothing major at all, some binder bugfixes for issues found, some new
  mei device ids, firmware building warning fixes, habanalabs fixes, a
  few other build fixes, and a MAINTAINERS update.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  test_firmware: fix a memory leak bug
  hpet: Fix division by zero in hpet_time_div()
  eeprom: make older eeprom drivers select NVMEM_SYSFS
  vmw_balloon: Remove Julien from the maintainers list
  fpga-manager: altera-ps-spi: Fix build error
  mei: me: add mule creek canyon (EHL) device ids
  binder: prevent transactions to context manager from its own process.
  binder: Set end of SG buffer area properly.
  firmware: Fix missing inline
  firmware: fix build errors in paged buffer handling code
  habanalabs: don't reset device when getting VRHOT
  habanalabs: use %pad for printing a dma_addr_t

Pull tty fixes from Greg KH:
 "Here are two tty/vt fixes:

   - delete the netx-serial driver as the arch has been removed, no need
     to keep the serial driver for it around either.

   - vt console_lock fix to resolve a reported noisy warning at runtime

  Both of these have been in linux-next with no reported issues"

* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Grab console_lock around con_is_bound in show_bind
  tty: serial: netx: Delete driver

Pull SPDX fixes from Greg KH:
 "Here are some small SPDX fixes for 5.3-rc2 for things that came in
  during the 5.3-rc1 merge window that we previously missed.

  Only three small patches here:

   - two uapi patches to resolve some SPDX tags that were not correct

   - fix an invalid SPDX tag in the iomap Makefile file

  All have been properly reviewed on the public mailing lists"

* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  iomap: fix Invalid License ID
  treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
  treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers

Pull USB fixes from Greg KH:
 "Here are some small fixes for 5.3-rc2. All of these resolve some
  reported issues, some more than others :)

  Included in here is:

   - xhci fix for an annoying issue with odd devices

   - reversion of some usb251xb patches that should not have been merged

   - usb pci quirk additions and fixups

   - usb storage fix

   - usb host controller error test fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
  usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
  Revert "usb: usb251xb: Add US port lanes inversion property"
  Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
  usb: wusbcore: fix unbalanced get/put cluster_id
  usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
  usb-storage: Add a limitation for blk_queue_max_hw_sectors()
  usb: pci-quirks: Minor cleanup for AMD PLL quirk
  usb: pci-quirks: Correct AMD PLL quirk detection

Pull ARM SoC fixes from Olof Johansson:
 "Here's the first batch of fixes for this release cycle.

  Main diffstat here is the re-deletion of netx. I messed up and most
  likely didn't remove the files from the index when I test-merged this
  and saw conflicts, and from there on out 'git rerere' remembered the
  mistake and I missed checking it. Here it's done again as expected.

  Besides that:

   - A defconfig refresh + enabling of new drivers for u8500

   - i.MX fixlets for i2c/SAI/pinmux

   - sleep.S build fix for Davinci

   - Broadcom devicetree build/warning fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: defconfig: u8500: Add new drivers
  ARM: defconfig: u8500: Refresh defconfig
  ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
  ARM: davinci: fix sleep.S build error on ARMv4
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: Delete netx a second time
  ARM: dts: imx7ulp: Fix usb-phy unit address format

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and functional updates:

   - Prevent stale huge I/O TLB mappings on 32bit. A long standing bug
     which got exposed by KPTI support for 32bit

   - Prevent bogus access_ok() warnings in arch_stack_walk_user()

   - Add display quirks for Lenovo devices which have height and width
     swapped

   - Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of
     the CR2 bug fix series.

   - Unbreak handling of force enabled HPET by moving the 'is HPET
     counting' check back to the original place.

   - A more accurate check for running on a hypervisor platform in the
     MDS mitigation code. Not perfect, but more accurate than the
     previous one.

   - Update a stale and confusing comment vs. IRQ stacks"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/mds: Apply more accurate check on hypervisor platform
  x86/hpet: Undo the early counter is counting check
  x86/entry/32: Pass cr2 to do_async_page_fault()
  x86/irq/64: Update stale comment
  x86/sysfb_efi: Add quirks for some devices with swapped width and height
  x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()
  mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
  x86/mm: Sync also unmappings in vmalloc_sync_all()
  x86/mm: Check for pfn instead of page in vmalloc_sync_one()

Pull scheduler fixes from Thomas Gleixner:
 "Two fixes for the fair scheduling class:

   - Prevent freeing memory which is accessible by concurrent readers

   - Make the RCU annotations for numa groups consistent"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Use RCU accessors consistently for ->numa_group
  sched/fair: Don't free p->numa_faults with concurrent readers

Pull perf fixes from Thomas Gleixner:
 "A pile of perf related fixes:

  Kernel:
   - Fix SLOTS PEBS event constraints for Icelake CPUs

   - Add the missing mask bit to allow counting hardware generated
     prefetches on L3 for Icelake CPUs

   - Make the test for hypervisor platforms more accurate (as far as
     possible)

   - Handle PMUs correctly which override event->cpu

   - Yet another missing fallthrough annotation

  Tools:
     perf.data:
        - Fix loading of compressed data split across adjacent records
        - Fix buffer size setting for processing CPU topology perf.data
          header.

     perf stat:
        - Fix segfault for event group in repeat mode
        - Always separate "stalled cycles per insn" line, it was being
          appended to the "instructions" line.

     perf script:
        - Fix --max-blocks man page description.
        - Improve man page description of metrics.
        - Fix off by one in brstackinsn IPC computation.

     perf probe:
        - Avoid calling freeing routine multiple times for same pointer.

     perf build:
        - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
          treated as errors, breaking the build"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Mark expected switch fall-throughs
  perf/core: Fix creating kernel counters for PMUs that override event->cpu
  perf/x86: Apply more accurate check on hypervisor platform
  perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
  perf/x86/intel: Fix SLOTS PEBS event constraint
  perf build: Do not use -Wshadow on gcc < 4.8
  perf probe: Avoid calling freeing routine multiple times for same pointer
  perf probe: Set pev->nargs to zero after freeing pev->args entries
  perf session: Fix loading of compressed data split across adjacent records
  perf stat: Always separate stalled cycles per insn
  perf stat: Fix segfault for event group in repeat mode
  perf tools: Fix proper buffer size for feature processing
  perf script: Fix off by one in brstackinsn IPC computation
  perf script: Improve man page description of metrics
  perf script: Fix --max-blocks man page description

Pull locking fixes from Thomas Gleixner:
 "A set of locking fixes:

   - Address the fallout of the rwsem rework. Missing ACQUIREs and a
     sanity check to prevent a use-after-free

   - Add missing checks for unitialized mutexes when mutex debugging is
     enabled.

   - Remove the bogus code in the generic SMP variant of
     arch_futex_atomic_op_inuser()

   - Fixup the #ifdeffery in lockdep to prevent compile warnings"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Test for initialized mutex
  locking/lockdep: Clean up #ifdef checks
  locking/lockdep: Hide unused 'class' variable
  locking/rwsem: Add ACQUIRE comments
  tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
  lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop
  locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
  locking/rwsem: Don't call owner_on_cpu() on read-owner
  futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser()

Pull objtool fix from Thomas Gleixner:
 "A single robustness fix for objtool to handle unbalanced CLAC
  invocations under all circumstances"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Improve UACCESS coverage

Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
 "This marks switch cases where we are expecting to fall through, and
  globally enables the -Wimplicit-fallthrough option in the main
  Makefile.

  Finally, some missing-break fixes that have been tagged for -stable:

   - drm/amdkfd: Fix missing break in switch statement

   - drm/amdgpu/gfx10: Fix missing break in switch statement

  With these changes, we completely get rid of all the fall-through
  warnings in the kernel"

* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  Makefile: Globally enable fall-through warning
  drm/i915: Mark expected switch fall-throughs
  drm/amd/display: Mark expected switch fall-throughs
  drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
  drm/amdgpu/gfx10: Fix missing break in switch statement
  drm/amdkfd: Fix missing break in switch statement
  perf/x86/intel: Mark expected switch fall-throughs
  mtd: onenand_base: Mark expected switch fall-through
  afs: fsclient: Mark expected switch fall-throughs
  afs: yfsclient: Mark expected switch fall-throughs
  can: mark expected switch fall-throughs
  firewire: mark expected switch fall-throughs

Pull s390 updates from Heiko Carstens:

 - Add ABI to kernel image file which allows e.g. the file utility to
   figure out the kernel version.

 - Wire up clone3 system call.

 - Add support for kasan bitops instrumentation.

 - uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.

 - Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
   defined with 2 GB instead of the default value of 1 MB.

 - Farhan Ali leaves the group of vfio-ccw maintainers.

 - Various small vfio-ccw fixes.

 - Add missing locking for airq_areas array in virtio code.

 - Minor qdio improvements.

* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  MAINTAINERS: vfio-ccw: Remove myself as the maintainer
  s390/mm: use shared variables for sysctl range check
  virtio/s390: fix race on airq_areas[]
  s390/dma: provide proper ARCH_ZONE_DMA_BITS value
  s390/kasan: add bitops instrumentation
  s390/bitops: make test functions return bool
  s390: wire up clone3 system call
  kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
  s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
  s390/hypfs: fix a typo in the name of a function
  s390/qdio: restrict QAOB usage to IQD unicast queues
  s390/qdio: add sanity checks to the fast-requeue path
  s390: enable detection of kernel version from bzImage
  Documentation: fix vfio-ccw doc
  vfio-ccw: Update documentation for csch/hsch
  vfio-ccw: Don't call cp_free if we are processing a channel program
  vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
  vfio-ccw: Fix memory leak and don't call cp_free in cp_init
  vfio-ccw: Fix misleading comment when setting orb.cmd.c64

Pull Devicetree fixes from Rob Herring:
 "The nvmem changes would typically go thru Greg's tree, but they were
  missed in the merge window. [ Acked by Greg ]

  Summary:

   - Fix mismatches in $id values and actual filenames. Now checked by
     tools.

   - Convert nvmem binding to DT schema

   - Fix a typo in of_property_read_bool() kerneldoc

   - Remove some redundant description in al-fic interrupt-controller"

* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix more $id value mismatches filenames
  dt-bindings: nvmem: SID: Fix the examples node names
  dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
  of: Fix typo in kerneldoc
  dt-bindings: interrupt-controller: al-fic: remove redundant binding
  dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id