Now that the request is guaranteed to specify the context, it is possible to
update the context switch code to use requests rather than ring and context
pairs. This patch updates i915_switch_context() accordingly.

Also removed the warning that the request's context must match the last context
switch's context. As the context switch now gets the context object from the
request structure, there is no longer any scope for the two to become out of
step.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The final step in removing the OLR from i915_gem_init_hw() is to pass the newly
allocated request structure in to each step rather than passing a ring
structure. This patch updates both i915_ppgtt_init_ring() and
i915_gem_context_enable() to take request pointers.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Now that a single per ring loop is being done for all the different
intialisation steps in i915_gem_init_hw(), it is possible to add proper request
management as well. The last remaining issue is that the context enable call
eventually ends up within *_render_state_init() and this does its own private
_i915_add_request() call.

This patch adds explicit request creation and submission to the top level loop
and removes the add_request() from deep within the sub-functions.

v2: Updated for removal of batch_obj from add_request call in previous patch.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The render state initialisation code does an explicit i915_add_request() call to
commit the init commands. It was passing in the initialisation batch buffer to
add_request() as the batch object parameter. However, the batch object entry in
the request structure (which is all that parameter is used for) is meant for
keeping track of user generated batch buffers for blame tagging during GPU
hangs.

This patch clears the batch object parameter so that kernel generated batch
buffers are not tagged as being user generated.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The start of day context initialisation code in i915_gem_context_enable() loops
over each ring and calls the legacy switch context or the execlist init context
code as appropriate.

This patch moves the ring looping out of that function in to the top level
caller i915_gem_init_hw(). This means the a single pass can be made over all
rings doing the PPGTT, L3 remap and context initialisation of each ring
altogether.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The i915_gem_init_hw() function calls a bunch of smaller initialisation
functions. Multiple of which have generic sections and per ring sections. This
means multiple passes are done over the rings. Each pass writes data to the ring
which floats around in that ring's OLR until some random point in the future
when an add_request() is done by some random other piece of code.

This patch breaks i915_ppgtt_init_hw() in two with the per ring initialisation
now being done in i915_ppgtt_init_ring(). The ring looping is now done at the
top level in i915_gem_init_hw().

v2: Fix dumb loop variable re-use.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Added explicit request creation and submission to the GPU idle code path.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In order to explcitly track all GPU work (and completely remove the outstanding
lazy request), it is necessary to add extra i915_add_request() calls to various
places. Some of these do not need the implicit cache flush done as part of the
standard batch buffer submission process.

This patch adds a flag to _add_request() to specify whether the flush is
required or not.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The plan is to pass requests around as the basic submission tracking structure
rather than rings and contexts. This patch updates the
execbuffer_move_to_active() code path.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The plan is to pass requests around as the basic submission tracking structure
rather than rings and contexts. This patch updates the move_to_gpu() code paths.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Updated a couple of trace points to use the now cached request pointer rather
than extracting it from the ring.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Rather than just having a local request variable in the execbuff code, the
request pointer is now stored in the execbuff params structure. Also added
explicit cleanup of the request (plus wiping the OLR to match) in the error
case. This means that the execbuff code is no longer dependent upon the OLR
keeping track of the request so as to not leak it when things do go wrong. Note
that in the success case, the i915_add_request() at the end of the submission
function will tidy up the request and clear the OLR.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The alloc_request() function does not actually return the newly allocated
request. Instead, it must be pulled from ring->outstanding_lazy_request. This
patch fixes this so that code can create a request and start using it knowing
exactly which request it actually owns.

v2: Updated for new i915_gem_request_alloc() scheme.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Shrunk the parameter list of i915_gem_execbuffer_retire_commands() to a single
structure as everything it requires is available in the execbuff_params object.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The do_execbuf() function takes quite a few parameters. The actual set of
parameters is going to change with the conversion to passing requests around.
Further, it is due to grow massively with the arrival of the GPU scheduler.

This patch simplifies the prototype by passing a parameter structure instead.
Changing the parameter set in the future is then simply a matter of
adding/removing items to the structure.

Note that the structure does not contain absolutely everything that is passed
in. This is because the intention is to use this structure more extensively
later in this patch series and more especially in the GPU scheduler that is
coming soon. The latter requires hanging on to the structure as the final
hardware submission can be delayed until long after the execbuf IOCTL has
returned to user land. Thus it is unsafe to put anything in the structure that
is local to the IOCTL call itself - such as the 'args' parameter. All entries
must be copies of data or pointers to structures that are reference counted in
some way and guaranteed to exist for the duration of the batch buffer's life.

v2: Rebased to newer tree and updated for changes to the command parser.
Specifically, a code shuffle has required saving the batch start address in the
params structure.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In execlist mode, the context object pointer is written in to the request
structure (and reference counted) at the point of request creation. In legacy
mode, this only happens inside i915_add_request().

This patch updates the legacy code path to match the execlist version. This
allows all the intermediate code between request creation and request submission
to get at the context object given only a request structure. Thus negating the
need to pass context pointers here, there and everywhere.

v2: Moved the context reference so it does not need to be undone if the
get_seqno() fails.

v3: Fixed execlist mode always hitting a warning about invalid last_contexts
(which don't exist in execlist mode).

v4: Updated for new i915_gem_request_alloc() scheme.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Start of explicit request management in the execbuffer code path. This patch
adds a call to allocate a request structure before all the actual hardware work
is done. Thus guaranteeing that all that work is tagged by a known request. At
present, nothing further is done with the request, the rest comes later in the
series.

The only noticable change is that failure to get a request (e.g. due to lack of
memory) will be caught earlier in the sequence. It now occurs right at the start
before any un-undoable work has been done.

v2: Simplified the error handling path.

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The i915_add_request() function is called to keep track of work that has been
written to the ring buffer. It adds epilogue commands to track progress (seqno
updates and such), moves the request structure onto the right list and other
such house keeping tasks. However, the work itself has already been written to
the ring and will get executed whether or not the add request call succeeds. So
no matter what goes wrong, there isn't a whole lot of point in failing the call.

At the moment, this is fine(ish). If the add request does bail early on and not
do the housekeeping, the request will still float around in the
ring->outstanding_lazy_request field and be picked up next time. It means
multiple pieces of work will be tagged as the same request and driver can't
actually wait for the first piece of work until something else has been
submitted. But it all sort of hangs together.

This patch series is all about removing the OLR and guaranteeing that each piece
of work gets its own personal request. That means that there is no more
'hoovering up of forgotten requests'. If the request does not get tracked then
it will be leaked. Thus the add request call _must_ not fail. The previous patch
should have already ensured that it _will_ not fail by removing the potential
for running out of ring space. This patch enforces the rule by actually removing
the early exit paths and the return code.

Note that if something does manage to fail and the epilogue commands don't get
written to the ring, the driver will still hang together. The request will be
added to the tracking lists. And as in the old case, any subsequent work will
generate a new seqno which will suffice for marking the old one as complete.

v2: Improved WARNings (Tomas Elf review request).

For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

It is a bad idea for i915_add_request() to fail. The work will already have been
send to the ring and will be processed, but there will not be any tracking or
management of that work.

The only way the add request call can fail is if it can't write its epilogue
commands to the ring (cache flushing, seqno updates, interrupt signalling). The
reasons for that are mostly down to running out of ring buffer space and the
problems associated with trying to get some more. This patch prevents that
situation from happening in the first place.

When a request is created, it marks sufficient space as reserved for the
epilogue commands. Thus guaranteeing that by the time the epilogue is written,
there will be plenty of space for it. Note that a ring_begin() call is required
to actually reserve the space (and do any potential waiting). However, that is
not currently done at request creation time. This is because the ring_begin()
code can allocate a request. Hence calling begin() from the request allocation
code would lead to infinite recursion! Later patches in this series remove the
need for begin() to do the allocate. At that point, it becomes safe for the
allocate to call begin() and really reserve the space.

Until then, there is a potential for insufficient space to be available at the
point of calling i915_add_request(). However, that would only be in the case
where the request was created and immediately submitted without ever calling
ring_begin() and adding any work to that request. Which should never happen. And
even if it does, and if that request happens to fall down the tiny window of
opportunity for failing due to being out of ring space then does it really
matter because the request wasn't doing anything in the first place?

v2: Updated the 'reserved space too small' warning to include the offending
sizes. Added a 'cancel' operation to clean up when a request is abandoned. Added
re-initialisation of tracking state after a buffer wrap to keep the sanity
checks accurate.

v3: Incremented the reserved size to accommodate Ironlake (after finally
managing to run on an ILK system). Also fixed missing wrap code in LRC mode.

v4: Added extra comment and removed duplicate WARN (feedback from Tomas).

For: VIZ-5115
CC: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Backmerge drm-next because the conflict between Ander's atomic fixes
for 4.2 and Maartens future work are getting to unwielding to handle.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_ringbuffer.h

Just always take ours, same as git merge -X ours, but done by hand
because I didn't trust git: It's confusing that it doesn't show any
conflicts in the merge diff at all.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

In Indirect context w/a batch buffer,
+WaFlushCoherentL3CacheLinesAtContextSwitch:bdw

v2: Add LRI commands to set/reset bit that invalidates coherent lines,
update WA to include programming restrictions and exclude CHV as
it is not required (Ville)

v3: Avoid unnecessary read when it can be done by reading register once (Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In Indirect and Per context w/a batch buffer,
+WaDisableCtxRestoreArbitration

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Some of the WA applied using WA batch buffers perform writes to scratch page.
In the current flow WA are initialized before scratch obj is allocated.
This patch reorders intel_init_pipe_control() to have a valid scratch obj
before we initialize WA.

v2: Check for valid scratch page before initializing WA as some of them
perform writes to it.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Some of the WA are to be applied during context save but before restore and
some at the end of context save/restore but before executing the instructions
in the ring, WA batch buffers are created for this purpose and these WA cannot
be applied using normal means. Each context has two registers to load the
offsets of these batch buffers. If they are non-zero, HW understands that it
need to execute these batches.

v1: In this version two separate ring_buffer objects were used to load WA
instructions for indirect and per context batch buffers and they were part
of every context.

v2: Chris suggested to include additional page in context and use it to load
these WA instead of creating separate objects. This will simplify lot of things
as we need not explicity pin/unpin them. Thomas Daniel further pointed that GuC
is planning to use a similar setup to share data between GuC and driver and
WA batch buffers can probably share that page. However after discussions with
Dave who is implementing GuC changes, he suggested to use an independent page
for the reasons - GuC area might grow and these WA are initialized only once and
are not changed afterwards so we can share them share across all contexts.

The page is updated with WA during render ring init. This has an advantage of
not adding more special cases to default_context.

We don't know upfront the number of WA we will applying using these batch buffers.
For this reason the size was fixed earlier but it is not a good idea. To fix this,
the functions that load instructions are modified to report the no of commands
inserted and the size is now calculated after the batch is updated. A macro is
introduced to add commands to these batch buffers which also checks for overflow
and returns error.
We have a full page dedicated for these WA so that should be sufficient for
good number of WA, anything more means we have major issues.
The list for Gen8 is small, same for Gen9 also, maybe few more gets added
going forward but not close to filling entire page. Chris suggested a two-pass
approach but we agreed to go with single page setup as it is a one-off routine
and simpler code wins.

One additional option is offset field which is helpful if we would like to
have multiple batches at different offsets within the page and select them
based on some criteria. This is not a requirement at this point but could
help in future (Dave).

Chris provided some helpful macros and suggestions which further simplified
the code, they will also help in reducing code duplication when WA for
other Gen are added. Add detailed comments explaining restrictions.
Use do {} while(0) for wa_ctx_emit() macro.

(Many thanks to Chris, Dave and Thomas for their reviews and inputs)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

If the user disables the GPU reset using the i915.reset parameter and
one occurs, report that we failed to reset the GPU. If we return early,
as we currently do, then we leave all state intact (with a hung GPU)
and clients block forever waiting for their requests to complete.

Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Mark i915.reset as an unsafe modoption, as discussed with
Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The module pciid list got lost, but somehow most distros seem to
force-load drm drivers early and no one noticed for a while.

Bug introduced in

commit fd930478
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 19 20:27:27 2015 +0100

    drm/i915: Remove KMS Kconfig option
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

If we are doing an MST transaction and we've gotten HPD and we
lookup the device from the incoming msg, we should take the mgr
lock around it, so that mst_primary and mstb->ports are valid.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

This validates the mst_primary under the lock, and then calls
into the check and send function. This makes the code a lot
easier to understand the locking rules in.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-fixes-2015-06-22' of git://anongit.freedesktop.org/drm-intel into drm-next

fix warning introduced in last -fixes
* tag 'drm-intel-next-fixes-2015-06-22' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Silence compiler warning

This symbol came via exynos-next, but modular builds are broken
so just fix it up now.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
. Add atomic feature support
  - Exynos also now supports atomic feature. However, it doesn't
    guarantee atomic operation yet, and is required for more cleanups.
    This time we just modified for Exynos drm driver to use atomic
    interfaces instead of legacy ones. Next time, we will enhance
    Exynos drm driver to support the atomic operation.
. Add iommu support
  - This is a patch series according to below Exynos iommu integration
    work with DT and dma-mapping subsystem,
    http://lwn.net/Articles/607626/
. Consolidate Exynos drm driver initialization.
  - This patch sereis resolves the issue that only the first compoments
    was bound when happened deferred probing for other pipelines and
    also makes the driver to be more cleanned up by moving the dispered
    codes for registering kms drivers to one place.
. Add new MIC, DECON drivers, and MIPI-DSI support for Exynos5433.
  - Add MIC(Mobile image compressor) driver. MIC is a new IP for Exynos5433
    and later, which is used to transfer frame data to MIPI-DSI controller
    compressing the data to reduce memory bandwidth.
  - Add DECON driver for Exynos5433 SoC. This IP is a dislay controller
    similar to Exynos7's one but this controller has much different registers
    from Exynos7's ones so this driver has been implemented separately.
    We will implement a helper modules for FIMD and two DECON controllers
    to remove duplicated codes later.
  - Add Exynos5433 SoC support to MIPI-DSI driver, and device tree
    relevant patches.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (50 commits)
  ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
  drm/exynos: dsi: do not set TE GPIO direction by input
  drm/exynos: dsi: add support for MIC driver as a bridge
  drm/exynos: dsi: add support for Exynos5433
  drm/exynos: dsi: make use of array for clock access
  drm/exynos: dsi: make use of driver data for static values
  drm/exynos: dsi: add macros for register access
  drm/exynos: dsi: rename pll_clk to sclk_clk
  drm/exynos: mic: add MIC driver
  of: add helper for getting endpoint node of specific identifiers
  drm/exynos: add Exynos5433 decon driver
  drm/exynos: fix the input prompt of Exynos7 DECON
  drm/exynos: add drm_iommu_attach_device_if_possible()
  drm/exynos: Add the dependency for DRM_EXYNOS to DPI/DSI/DP
  drm/exynos: remove the dependency of DP driver for ARCH_EXYNOS
  drm/exynos: do not wait for vblank at atomic operation
  drm/exynos: Remove unused vma field of exynos_drm_gem_obj
  drm/exynos: fimd: fix page fault issue with iommu
  drm/exynos: iommu: improve a check for non-iommu dma_ops
  drm/exynos: iommu: detach from default dma-mapping domain on init
  ...

One more drm-misc pull for 4.2. The important one is the fix from Laurent
for Daniel Stone's mode_blob work.

* tag 'topic/drm-misc-2015-06-22' of git://anongit.freedesktop.org/drm-intel:
  drm/atomic: Don't set crtc_state->enable manually
  drm: prime: Document gem_prime_mmap
  drm: Avoid the double clflush on the last cache line in drm_clflush_virt_range()
  drm/atomic: Extract needs_modeset function
  drm/cma: Fix 64-bit size_t build warnings
  Documentation/drm: Update rotation property

Since we only support modesetting by default (disabling modesetting on
the command line prevents i915.ko from loading), having a parameter to
disable modesstting by default is superfluous, i.e. saying
CONFIG_DRM_I915_KMS=n is equivalent to CONFIG_DRM_I915=n.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Veter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

On older gen, pre-Ironlake, parts there is no hardwired pin to report
the presence of an LVDS panel. Instead, we have to rely on the VBT to
declare whether the machine has a panel or not. Though notoriously
unreliable, so far we have erred on the side of false-positives and have
required a list of machines which end up falsely reporting a panel as
present. However, we now have reports of false-negatives, machines with
an LVDS that are being ignored due to the VBT not declaring the panel.
This patch ignores the VBT setting if the BIOS has already enabled the
LVDS panel (and on Ironlake+ we also have the hardware presence pin).

It fixes the Samsung NP680Z5E-X01FR in the bug report, but is likely to
result in more false-positives, and since we rely on the BIOS to enable
the panel, there are likely different circumstances where the BIOS will
not enable that panel (and so we may see the same machine with and
without a panel all on the whim of the BIOS).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90979
Reported-and-tested-by: lysxia@gmail.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Internal requirement for the alignment is that it must be a
power-of-two, so enforce rejection at the user interface to execbuffer
(which allows the caller to specify a stricter-than-expected alignment
criterion).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This patch doesn't have any functional change, but organize fruntbuffer
invalidate and busy by removing unecesarry signature argument for ring.

It was unsed on mark_fb_busy and only used on fb_obj_invalidate for the
same ORIGIN_CS usage. So let's clean it a bit

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The same dpll p2 divider selection is repeated three times in the
gen2-4 .find_dpll() functions. Factor it out.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Make Paulo happier.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We have enough generic hotplug functions sprinkled all over i915_irq.c
to warrant moving them to a file of their own. This should further
underline the distinction between generic code in the new file and
platform specific hotplug and irq code that remains in i915_irq.c.

Add new intel_hpd_init_work to keep work functions static, and rename
get_port_from_pin to intel_hpd_pin_to_port while increasing its
visibility, but keep everything else the same.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We'll have three functions:

intel_hpd_irq_storm_detect for detecting irq storms,
intel_hpd_irq_storm_disable for disabling hotplugs after detected storms,
intel_hpd_irq_storm_reenable_work for re-enabling hotplug.

No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>