- 24 Sep, 2009 40 commits
-
-
Peter Zijlstra authored
In order to direct the SIGIO signal to a particular thread of a multi-threaded application we cannot, like suggested by the manpage, put a TID into the regular fcntl(F_SETOWN) call. It will still be send to the whole process of which that thread is part. Since people do want to properly direct SIGIO we introduce F_SETOWN_EX. The need to direct SIGIO comes from self-monitoring profiling such as with perf-counters. Perf-counters uses SIGIO to notify that new sample data is available. If the signal is delivered to the same task that generated the new sample it can augment that data by inspecting the task's user-space state right after it returns from the kernel. This is esp. convenient for interpreted or virtual machine driven environments. Both F_SETOWN_EX and F_GETOWN_EX take a pointer to a struct f_owner_ex as argument: struct f_owner_ex { int type; pid_t pid; }; Where type is one of F_OWNER_TID, F_OWNER_PID or F_OWNER_GID. Signed-off-by:Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Tested-by:
stephane eranian <eranian@googlemail.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Roland McGrath <roland@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
group_send_sig_info()->check_kill_permission() assumes that current is the sender and uses current_cred(). This is not true in send_sigio_to_task() case. From the security pov the sender is not current, but the task which did fcntl(F_SETOWN), that is why we have sigio_perm() which uses the right creds to check. Fortunately, send_sigio() always sends either SEND_SIG_PRIV or SI_FROMKERNEL() signal, so check_kill_permission() does nothing. But still it would be tidier to avoid this bogus security check and save a couple of cycles. Signed-off-by:
-
Oleg Nesterov authored
Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by:
-
Oleg Nesterov authored
sys_delete_module() can set MODULE_STATE_GOING after search_binary_handler() does try_module_get(). In this case set_binfmt()->try_module_get() fails but since none of the callers check the returned error, the task will run with the wrong old ->binfmt. The proper fix should change all ->load_binary() methods, but we can rely on fact that the caller must hold a reference to binfmt->module and use __module_get() which never fails. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Neil Horman authored
Allow core_pattern pipes to wait for user space to complete One of the things that user space processes like to do is look at metadata for a crashing process in their /proc/<pid> directory. this is racy however, since do_coredump in the kernel doesn't wait for the user space process to complete before it reaps the crashing process. This patch corrects that. Allowing the kernel to wait for the user space process to complete before cleaning up the crashing process. This is a bit tricky to do for a few reasons: 1) The user space process isn't our child, so we can't sys_wait4 on it 2) We need to close the pipe before waiting for the user process to complete, since the user process may rely on an EOF condition I've discussed several solutions with Oleg Nesterov off-list about this, and this is the one we've come up with. We add ourselves as a pipe reader (to prevent premature cleanup of the pipe_inode_info), and remove ourselves as a writer (to provide an EOF condition to the writer in user space), then we iterate until the user space process exits (which we detect by pipe->readers == 1, hence the > 1 check in the loop). When we exit the loop, we restore the proper reader/writer values, then we return and let filp_close in do_coredump clean up the pipe data properly. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Earl Chew <earl_chew@agilent.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Neil Horman authored
Introduce core pipe limiting sysctl. Since we can dump cores to pipe, rather than directly to the filesystem, we create a condition in which a user can create a very high load on the system simply by running bad applications. If the pipe reader specified in core_pattern is poorly written, we can have lots of ourstandig resources and processes in the system. This sysctl introduces an ability to limit that resource consumption. core_pipe_limit defines how many in-flight dumps may be run in parallel, dumps beyond this value are skipped and a note is made in the kernel log. A special value of 0 in core_pipe_limit denotes unlimited core dumps may be handled (this is the default value). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Neil Horman authored
Change how we detect recursive dumps. Currently we have a mechanism by which we try to compare pathnames of the crashing process to the core_pattern path. This is broken for a dozen reasons, and just doesn't work in any sort of robust way. I'm replacing it with the use of a 0 RLIMIT_CORE value. Since helper apps set RLIMIT_CORE to zero, we don't write out core files for any process with that particular limit set. It the core_pattern is a pipe, any non-zero limit is translated to RLIM_INFINITY. This allows complete dumps to be captured, but prevents infinite recursion in the event that the core_pattern process itself crashes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Roland McGrath authored
This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Vitaly Mayatskikh authored
Current behaviour of sys_waitid() looks odd. If user passes infop == NULL, sys_waitid() returns success. When user additionally specifies flag WNOWAIT, sys_waitid() returns -EFAULT on the same conditions. When user combines WNOWAIT with WCONTINUED, sys_waitid() again returns success. This patch adds check for ->wo_info in wait_noreap_copyout(). User-visible change: starting from this commit, sys_waitid() always checks infop != NULL and does not fail if it is NULL. Signed-off-by:
Vitaly Mayatskikh <v.mayatskih@gmail.com> Reviewed-by:
-
Vitaly Mayatskikh authored
do_wait() checks ->wo_info to figure out who is the caller. If it's not NULL the caller should be sys_waitid(), in that case do_wait() fixes up the retval or zeros ->wo_info, depending on retval from underlying function. This is bug: user can pass ->wo_info == NULL and sys_waitid() will return incorrect value. man 2 waitid says: waitid(): returns 0 on success Test-case: int main(void) { if (fork()) assert(waitid(P_ALL, 0, NULL, WEXITED) == 0); return 0; } Result: Assertion `waitid(P_ALL, 0, ((void *)0), 4) == 0' failed. Move that code to sys_waitid(). User-visible change: sys_waitid() will return 0 on success, either infop is set or not. Note, there's another bug in wait_noreap_copyout() which affects return value of sys_waitid(). It will be fixed in next patch. Signed-off-by: -
Oleg Nesterov authored
Kill the unused "parent" argument in wait_consider_task(), it was never used. Signed-off-by:
-
Oleg Nesterov authored
task_pid_type() is only used by eligible_pid() which has to check wo_type != PIDTYPE_MAX anyway. Remove this check from task_pid_type() and factor out ->pids[type] access, this shrinks .text a bit and simplifies the code. The matches the behaviour of other similar helpers, say get_task_pid(). The caller must ensure that pid_type is valid, not the callee. Signed-off-by:
-
Oleg Nesterov authored
child_wait_callback()->eligible_child() is not right, we can miss the wakeup if the task was detached before __wake_up_parent() and the caller of do_wait() didn't use __WALL. Move ->wo_pid checks from eligible_child() to the new helper, eligible_pid(), and change child_wait_callback() to use it instead of eligible_child(). Note: actually I think it would be better to fix the __WCLONE check in eligible_child(), it doesn't look exactly right. But it is not clear what is the supposed behaviour, and any change is user-visible. Reported-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by:
-
Oleg Nesterov authored
Suggested by Roland. do_wait(__WNOTHREAD) can only succeed if the caller is either ptracer, or it is ->real_parent and the child is not traced. IOW, caller == p->parent otherwise we should not wake up. Change child_wait_callback() to check this. Ratan reports the workload with CPU load >99% caused by unnecessary wakeups, should be fixed by this patch. Signed-off-by:
-
Oleg Nesterov authored
Ratan Nalumasu reported that in a process with many threads doing unnecessary wakeups. Every waiting thread in the process wakes up to loop through the children and see that the only ones it cares about are still not ready. Now that we have struct wait_opts we can change do_wait/__wake_up_parent to use filtered wakeups. We can make child_wait_callback() more clever later, right now it only checks eligible_child(). Signed-off-by:
James Morris <jmorris@namei.org> Tested-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
do_wait() wakeup optimization: shift security_task_wait() from eligible_child() to wait_consider_task() Preparation, no functional changes. eligible_child() has a single caller, wait_consider_task(). We can move security_task_wait() out from eligible_child(), this allows us to use it for filtered wake_up(). Signed-off-by:
-
Oleg Nesterov authored
The bug is old, it wasn't cause by recent changes. Test case: static void *tfunc(void *arg) { int pid = (long)arg; assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0); kill(pid, SIGKILL); sleep(1); return NULL; } int main(void) { pthread_t th; long pid = fork(); if (!pid) pause(); signal(SIGCHLD, SIG_IGN); assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0); int r = waitpid(-1, NULL, __WNOTHREAD); printf("waitpid: %d %m\n", r); return 0; } Before the patch this program hangs, after this patch waitpid() correctly fails with errno == -ECHILD. The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its ->real_parent is our sub-thread and we ignore SIGCHLD. But in this case we should wake up other threads which can sleep in do_wait(). Signed-off-by: -
Daisuke Nishimura authored
We now count MEM_CGROUP_STAT_SWAPOUT, so we can show swap usage. It would be useful for users to show swap usage in memory.stat file, because they don't need calculate memsw.usage - res.usage to know swap usage. Signed-off-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Balbir Singh authored
Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: -
Balbir Singh authored
Implement reclaim from groups over their soft limit Permit reclaim from memory cgroups on contention (via the direct reclaim path). memory cgroup soft limit reclaim finds the group that exceeds its soft limit by the largest number of pages and reclaims pages from it and then reinserts the cgroup into its correct place in the rbtree. Add additional checks to mem_cgroup_hierarchical_reclaim() to detect long loops in case all swap is turned off. The code has been refactored and the loop check (loop < 2) has been enhanced for soft limits. For soft limits, we try to do more targetted reclaim. Instead of bailing out after two loops, the routine now reclaims memory proportional to the size by which the soft limit is exceeded. The proportion has been empirically determined. [akpm@linux-foundation.org: build fix] [kamezawa.hiroyu@jp.fujitsu.com: fix softlimit css refcnt handling] [nishimura@mxp.nes.nec.co.jp: refcount of the "victim" should be decremented before exiting the loop] Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Balbir Singh authored
Refactor mem_cgroup_hierarchical_reclaim() Refactor the arguments passed to mem_cgroup_hierarchical_reclaim() into flags, so that new parameters don't have to be passed as we make the reclaim routine more flexible Signed-off-by:
-
Balbir Singh authored
Organize cgroups over soft limit in a RB-Tree Introduce an RB-Tree for storing memory cgroups that are over their soft limit. The overall goal is to 1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded. We are careful about updates, updates take place only after a particular time interval has passed 2. We remove the node from the RB-Tree when the usage goes below the soft limit The next set of patches will exploit the RB-Tree to get the group that is over its soft limit by the largest amount and reclaim from it, when we face memory contention. [hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot] Signed-off-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Balbir Singh authored
Add an interface to allow get/set of soft limits. Soft limits for memory plus swap controller (memsw) is currently not supported. Resource counters have been enhanced to support soft limits and new type RES_SOFT_LIMIT has been added. Unlike hard limits, soft limits can be directly set and do not need any reclaim or checks before setting them to a newer value. Kamezawa-San raised a question as to whether soft limit should belong to res_counter. Since all resources understand the basic concepts of hard and soft limits, it is justified to add soft limits here. Soft limits are a generic resource usage feature, even file system quotas support soft limits. Signed-off-by:
-
Balbir Singh authored
Soft limits is a new feature for the memory resource controller, something similar has existed in the group scheduler in the form of shares. The CPU controllers interpretation of shares is very different though. Soft limits are the most useful feature to have for environments where the administrator wants to overcommit the system, such that only on memory contention do the limits become active. The current soft limits implementation provides a soft_limit_in_bytes interface for the memory controller and not for memory+swap controller. The implementation maintains an RB-Tree of groups that exceed their soft limit and starts reclaiming from the group that exceeds this limit by the maximum amount. This patch: Add documentation for soft limits Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Add comments for the reason of smp_wmb() in mem_cgroup_commit_charge(). [akpm@linux-foundation.org: coding-style fixes] Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Balbir Singh authored
Change the memory cgroup to remove the overhead associated with accounting all pages in the root cgroup. As a side-effect, we can no longer set a memory hard limit in the root cgroup. A new flag to track whether the page has been accounted or not has been added as well. Flags are now set atomically for page_cgroup, pcg_default_flags is now obsolete and removed. [akpm@linux-foundation.org: fix a few documentation glitches] Signed-off-by:
-
Ben Blum authored
Alter the ss->can_attach and ss->attach functions to be able to deal with a whole threadgroup at a time, for use in cgroup_attach_proc. (This is a pre-patch to cgroup-procs-writable.patch.) Currently, new mode of the attach function can only tell the subsystem about the old cgroup of the threadgroup leader. No subsystem currently needs that information for each thread that's being moved, but if one were to be added (for example, one that counts tasks within a group) this bit would need to be reworked a bit to tell the subsystem the right information. [hidave.darkstar@gmail.com: fix build] Signed-off-by:
Ben Blum <bblum@google.com> Signed-off-by:
Paul Menage <menage@google.com> Acked-by:
Li Zefan <lizf@cn.fujitsu.com> Reviewed-by:
Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by:
-
Ben Blum authored
Changes css_set freeing mechanism to be under RCU This is a prepatch for making the procs file writable. In order to free the old css_sets for each task to be moved as they're being moved, the freeing mechanism must be RCU-protected, or else we would have to have a call to synchronize_rcu() for each task before freeing its old css_set. Signed-off-by:
-
Ben Blum authored
Separates all pidlist allocation requests to a separate function that judges based on the requested size whether or not the array needs to be vmalloced or can be gotten via kmalloc, and similar for kfree/vfree. Signed-off-by:
-
Ben Blum authored
Previously there was the problem in which two processes from different pid namespaces reading the tasks or procs file could result in one process seeing results from the other's namespace. Rather than one pidlist for each file in a cgroup, we now keep a list of pidlists keyed by namespace and file type (tasks versus procs) in which entries are placed on demand. Each pidlist has its own lock, and that the pidlists themselves are passed around in the seq_file's private pointer means we don't have to touch the cgroup or its master list except when creating and destroying entries. Signed-off-by:
-
Ben Blum authored
struct cgroup used to have a bunch of fields for keeping track of the pidlist for the tasks file. Those are now separated into a new struct cgroup_pidlist, of which two are had, one for procs and one for tasks. The way the seq_file operations are set up is changed so that just the pidlist struct gets passed around as the private data. Interface example: Suppose a multithreaded process has pid 1000 and other threads with ids 1001, 1002, 1003: $ cat tasks 1000 1001 1002 1003 $ cat cgroup.procs 1000 $ Signed-off-by:
-
Paul Menage authored
The following series adds a "cgroup.procs" file to each cgroup that reports unique tgids rather than pids, and allows all threads in a threadgroup to be atomically moved to a new cgroup. The subsystem "attach" interface is modified to support attaching whole threadgroups at a time, which could introduce potential problems if any subsystem were to need to access the old cgroup of every thread being moved. The attach interface may need to be revised if this becomes the case. Also added is functionality for read/write locking all CLONE_THREAD fork()ing within a threadgroup, by means of an rwsem that lives in the sighand_struct, for per-threadgroup-ness and also for sharing a cacheline with the sighand's atomic count. This scheme should introduce no extra overhead in the fork path when there's no contention. The final patch reveals potential for a race when forking before a subsystem's attach function is called - one potential solution in case any subsystem has this problem is to hang on to the group's fork mutex through the attach() calls, though no subsystem yet demonstrates need for an extended critical section. This patch: Revert commit 096b7fe0 Author: Li Zefan <lizf@cn.fujitsu.com> AuthorDate: Wed Jul 29 15:04:04 2009 -0700 Commit: Linus Torvalds <torvalds@linux-foundation.org> CommitDate: Wed Jul 29 19:10:35 2009 -0700 cgroups: fix pid namespace bug This is in preparation for some clashing cgroups changes that subsume the original commit's functionaliy. The original commit fixed a pid namespace bug which Ben Blum fixed independently (in the same way, but with different code) as part of a series of patches. I played around with trying to reconcile Ben's patch series with Li's patch, but concluded that it was simpler to just revert Li's, given that Ben's patch series contained essentially the same fix. Signed-off-by:
-
Paul Menage authored
This patch removes the restriction that a cgroup hierarchy must have at least one bound subsystem. The mount option "none" is treated as an explicit request for no bound subsystems. A hierarchy with no subsystems can be useful for plain task tracking, and is also a step towards the support for multiply-bindable subsystems. As part of this change, the hierarchy id is no longer calculated from the bitmask of subsystems in the hierarchy (since this is not guaranteed to be unique) but is allocated via an ida. Reference counts on cgroups from css_set objects are now taken explicitly one per hierarchy, rather than one per subsystem. Example usage: mount -t cgroup -o none,name=foo cgroup /mnt/cgroup Based on the "no-op"/"none" subsystem concept proposed by kamezawa.hiroyu@jp.fujitsu.com Signed-off-by:
-
Paul Menage authored
Currently the cgroups code makes the assumption that the subsystem pointers in a struct css_set uniquely identify the hierarchy->cgroup mappings associated with the css_set; and there's no way to directly identify the associated set of cgroups other than by indirecting through the appropriate subsystem state pointers. This patch removes the need for that assumption by adding a back-pointer from struct cg_cgroup_link object to its associated cgroup; this allows the set of cgroups to be determined by traversing the cg_links list in the struct css_set. Signed-off-by:
-
Paul Menage authored
While it's architecturally clean to have the cgroup debug subsystem be completely independent of the cgroups framework, it limits its usefulness for debugging the contents of internal data structures. Move the debug subsystem code into the scope of all the cgroups data structures to make more detailed debugging possible. Signed-off-by:
-
Paul Menage authored
To simplify referring to cgroup hierarchies in mount statements, and to allow disambiguation in the presence of empty hierarchies and multiply-bindable subsystems this patch adds support for naming a new cgroup hierarchy via the "name=" mount option A pre-existing hierarchy may be specified by either name or by subsystems; a hierarchy's name cannot be changed by a remount operation. Example usage: # To create a hierarchy called "foo" containing the "cpu" subsystem mount -t cgroup -oname=foo,cpu cgroup /mnt/cgroup1 # To mount the "foo" hierarchy on a second location mount -t cgroup -oname=foo cgroup /mnt/cgroup2 Signed-off-by:
-
Xiaotian Feng authored
Make the last unlock sequence consistent with previous unlock sequeue. Acked-by:
Xiaotian Feng <dfeng@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Fix various Documentation/ paths in include/linux/. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Reviewed-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Wu Fengguang authored
Introduce "-p|--pid <pid>" for walking the process address space. The default action is to walk raw memory PFNs. Both the virtual address and physical address of each present pages will be listed: # ./tools/vm/page-types -lp $$ | head -3 voffset offset len flags 400 11bebe 1 __RU_lA____M______________________ 402 11bebc 1 __RU_lA____M______________________ Note that voffset/offset/len are now showed as hex numbers. [akpm@linux-foundation.org: coding-style fixes] Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Josh Triplett authored
Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
