the fix add testcase for testing aes ofb mode.
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

keep the hex error value reporting version (a) to be consistent
with decrypt_done(), and (b) to keep our hardware guys happy.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

remains from descriptor debugging - not required for normal operation.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The presence of a h/w Queue Interface would fail due to this
cut-n-paste snafu.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

- add IRQF_SHARED to request_irq flags to support parts such as
the p1023 that has one IRQ line per couple of rings.

- resetting a job ring triggers an interrupt, so move request_irq
prior to jr_reset to avoid 'got IRQ but nobody cared' messages.

- disable IRQs in h/w to avoid contention between reset and
interrupt status

- delete invalid comment - if there were incomplete jobs,
module would be in use, preventing an unload.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes 2 hmac inter-dependent bugs.

1. "omap-sham: hash-in-progress is stored in hw format" commit introduced
optimization where temporary hash had been stored in OMAP specific format
(big endian).
For SHA1 it is different to real hash format, which is little endian.
Final HMAC value was calculated using incorrect hash.
Because CONFIG_CRYPTO_MANAGER_TESTS was disabled this error remained
unnoticed. After enabling this option, bug has been found.

2. HMAC was calculated using temporrary hash value.
For a single-request updates, temporary hash was the final one and
HMAC result was correct. But in fact only the final hash had to be used.
All crypto tests for HMAC produces only single request and
could not catch the problem. This problem is fixed here.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

EMU chips also have crypto HW as HS chips.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

SHA1 accelerator can also be busy. Add -EBUSY status return option and
return busy status from omap_sham_finup().
Signed-off-by: Markku Kylanpaa <ext-markku.kylanpaa@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This change adds support for AES encrypting and decrypting using
advanced crypto engine found on Samsung S5PV210 and S5PC110 SoCs.
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The SPAcc's have 2 equally sized FIFO's - a command FIFO and a status
FIFO.  The command FIFO takes the requests that are to be performed and
the status FIFO reports the results.  It is possible to get into the
situation where there are more free spaces in the command FIFO than the
status FIFO if we don't empty the status FIFO quickly enough resulting
in a possible overflow of the status FIFO.  This can result in incorrect
status being reported in the status FIFO.

Make sure that when we are submitting requests the number of requests
that have been dispatched but not yet popped from the status FIFO does
not exceed the size of a single FIFO.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add new SHA-1/256 module that never needs any fallback and just calls the
PadLock hardware instruction supported from VIA Nano processors to implement
the "update" and "final" function.

They are respectively named "sha1_alg_nano" and "sha256_alg_nano", and will
be used on any VIA Nano processor or the later ones. On VIA C7 CPU, the
"sha1_alg" and "sha256_alg" modules will still be used as before.
Signed-off-by: Brilly Wu <brillywu@viatech.com.cn>
Signed-off-by: Kary Jin <karyjin@viatech.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

- all the integration parameters have been captured by the binding.
- the block name really uniquely identifies this hardware.

Some advocate putting SoC names everywhere in case software needs
to work around some chip-specific bug, but more precise SoC
information already exists in SVR, and board information already
exists in the top-level device tree node.

Note that sometimes the SoC name is a worse identifier than the
block version, as the block version can change between revisions
of the same SoC.

As a matter of historical reference, neither SEC versions 2.x
nor 3.x (driven by talitos) ever needed CHIP references.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Acked-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ARRAY_SIZE() was intended here instead of sizeof().  sizeof() is four
times larger than ARRAY_SIZE().  outstr is normally 256 chars so 
printing garbage to it could overfill the buffer and corrupt memory.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

t_alg is an ERR_PTR here so we can't dereference it.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Help clarify that the number trailing in compatible nomenclature
is the version number of the device, i.e., change:

"fsl,p4080-sec4.0", "fsl,sec4.0";

to:

"fsl,p4080-sec-v4.0", "fsl,sec-v4.0";
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Steve Cornelius <sec@pobox.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The SEC4 supercedes the SEC2.x/3.x as Freescale's
Integrated Security Engine.  Its programming model is
incompatible with all prior versions of the SEC (talitos).

The SEC4 is also known as the Cryptographic Accelerator
and Assurance Module (CAAM); this driver is named caam.

This initial submission does not include support for Data Path
mode operation - AEAD descriptors are submitted via the job
ring interface, while the Queue Interface (QI) is enabled
for use by others.  Only AEAD algorithms are implemented
at this time, for use with IPsec.

Many thanks to the Freescale STC team for their contributions
to this driver.
Signed-off-by: Steve Cornelius <sec@pobox.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes problem with packets that are not multiple of 64bytes.
Signed-off-by: Adrian Hoban <adrian.hoban@intel.com>
Signed-off-by: Aidan O'Mahony <aidan.o.mahony@intel.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Introduce ARCH_NO_SYSDEV_OPS config option (v2)
  cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
  KVM: Use syscore_ops instead of sysdev class and sysdev
  PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
  timekeeping: Use syscore_ops instead of sysdev class and sysdev
  x86: Use syscore_ops instead of sysdev classes and sysdevs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix test of uninitialized netdev

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits)
  [SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module
  [SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion
  [SCSI] Revert "[SCSI] Retrieve the Caching mode page"
  [SCSI] bnx2fc: IO completion not processed due to missed wakeup
  [SCSI] qla4xxx: Update driver version to 5.02.00-k6
  [SCSI] qla4xxx: masking required bits of add_fw_options during initialization
  [SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices
  [SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param
  [SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter
  [SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed
  [SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter
  [SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN
  [SCSI] qla4xxx: cleanup DDB relogin logic during initialization
  [SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed
  [SCSI] qla4xxx: Do not send mbox command if FW is in failed state
  [SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list()
  [SCSI] ses: add subenclosure support
  [SCSI] bnx2fc: Bump version to 1.0.1
  [SCSI] bnx2fc: Remove unnecessary module state checks
  [SCSI] bnx2fc: Fix MTU issue by using static MTU
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kdb: add usage string of 'per_cpu' command
  kgdb,x86_64: fix compile warning found with sparse
  kdb: code cleanup to use macro instead of value
  kgdboc,kgdbts: strlen() doesn't count the terminator

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  route: Take the right src and dst addresses in ip_route_newports
  ipv4: Fix nexthop caching wrt. scoping.
  ipv4: Invalidate nexthop cache nh_saddr more correctly.
  net: fix pch_gbe section mismatch warning
  ipv4: fix fib metrics
  mlx4_en: Removing HW info from ethtool -i report.
  net_sched: fix THROTTLED/RUNNING race
  drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
  drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
  bonding: fix rx_handler locking
  myri10ge: fix rmmod crash
  mlx4_en: updated driver version to 1.5.4.1
  mlx4_en: Using blue flame support
  mlx4_core: reserve UARs for userspace consumers
  mlx4_core: maintain available field in bitmap allocator
  mlx4: Add blue flame support for kernel consumers
  mlx4_en: Enabling new steering
  mlx4: Add support for promiscuous mode in the new steering model.
  mlx4: generalization of multicast steering.
  mlx4_en: Reporting HW revision in ethtool -i
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Disable ASPM when _OSC control is not granted for PCIe services
  PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs
  PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
  PCI/ACPI: Report ASPM support to BIOS if not disabled from command line

* git://git.infradead.org/battery-2.6: (30 commits)
  bq20z75: Fix time and temp units
  bq20z75: Fix issues with present and suspend
  z2_battery: Fix count of properties
  s3c_adc_battery: Fix method names when PM not set
  z2_battery: Add MODULE_DEVICE_TABLE
  ds2782_battery: Add MODULE_DEVICE_TABLE
  bq20z75: Add MODULE_DEVICE_TABLE
  power_supply: Update power_supply_is_watt_property
  bq20z75: Add i2c retry mechanism
  bq20z75: Add optional battery detect gpio
  twl4030_charger: Make the driver atomic notifier safe
  bq27x00: Use single i2c_transfer call for property read
  bq27x00: Cleanup bq27x00_i2c_read
  bq27x00: Minor cleanups
  bq27x00: Give more specific reports on battery status
  bq27x00: Add MODULE_DEVICE_TABLE
  bq27x00: Add new properties
  bq27x00: Poll battery state
  bq27x00: Cache battery registers
  bq27x00: Add bq27000 support
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm stripe: implement merge method
  dm mpath: allow table load with no priority groups
  dm mpath: fail message ioctl if specified path is not valid
  dm ioctl: add flag to wipe buffers for secure data
  dm ioctl: prepare for crypt key wiping
  dm crypt: wipe keys string immediately after key is set
  dm: add flakey target
  dm: fix opening log and cow devices for read only tables

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc2005 - fix locking issue
  Input: tsc2005 - use relative jiffies to schedule the watchdog
  Input: tsc2005 - driver should depend on GENERIC_HARDIRQS

Merge branch 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits)
  genirq: Expand generic show_interrupts()
  gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler
  gpio: Cleanup genirq namespace
  arm: ep93xx: Add basic interrupt info
  arm/gpio: Remove three copies of broken and racy debug code
  xtensa: Use generic show_interrupts()
  xtensa: Convert genirq namespace
  xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED
  xtensa: Convert s6000 gpio irq_chip to new functions
  xtensa: Convert main irq_chip to new functions
  um: Use generic show_interrupts()
  um: Convert genirq namespace
  m32r: Use generic show_interrupts()
  m32r: Convert genirq namespace
  h8300: Use generic show_interrupts()
  h8300: Convert genirq namespace
  avr32: Cleanup eic_set_irq_type()
  avr32: Use generic show_interrupts()
  avr: Cleanup genirq namespace
  avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED
  ...

Fix up trivial conflict in drivers/gpio/timbgpio.c

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, doc: Update sched-design-CFS.txt
  sched: Remove unused 'rq' variable and cpu_rq() call from alloc_fair_sched_group()
  sched.h: Fix a typo ("its")
  sched: Fix yield_to kernel-doc

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
  perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
  perf symbols: Look at .dynsym again if .symtab not found
  perf build-id: Add quirk to deal with perf.data file format breakage
  perf session: Pass evsel in event_ops->sample()
  perf: Better fit max unprivileged mlock pages for tools needs
  perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
  perf top: Fix uninitialized 'counter' variable
  tracing: Fix set_ftrace_filter probe function display
  perf, x86: Fix Intel fixed counters base initialization

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Provide locked setter for chip, handler, name
  genirq: Provide a lockdep helper
  genirq; Remove the last leftovers of the old sparse irq code

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Fix WARN_ON() test for UP
  WARN_ON_SMP(): Allow use in if() statements on UP
  x86, dumpstack: Use %pB format specifier for stack trace
  vsprintf: Introduce %pB format specifier
  lockdep: Remove unused 'factor' variable from lockdep_stats_show()

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional
  x86: DT: Fix return condition in irq_create_of_mapping()
  x86, mpparse: Move check_slot into CONFIG_X86_IO_APIC context

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: merge m68k and m68knommu arch directories

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fix multiple RTC detections on SUN4D

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cmpxchg: implement cmpxchg64()
  [S390] xchg/cmpxchg: move to own header file
  [S390] ccwgroup_driver: remove duplicate members
  [S390] ccw_bus_type: make it static
  [S390] ccw_driver: remove duplicate members
  [S390] qdio: prevent handling of buffers if count is zero
  [S390] setup: register bss section as resource
  [S390] setup: simplify setup_resources()
  [S390] wire up sys_syncfs
  [S390] wire up sys_clock_adjtime
  [S390] wire up sys_open_by_handle_at
  [S390] wire up sys_name_to_handle_at
  [S390] oprofile: disable hw sampling for CONFIG_32BIT
  [S390] early: limit savesys cmd string handling
  [S390] early: Fix possible overlapping data buffer

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
  MIPS: JZ4740: qi_lb60: Add gpio-charger device
  MIPS: Wire up syncfs(2).
  MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
  MIPS: VR41xx: Convert to new irq_chip functions
  MIPS: TXx9: Convert to new irq_chip functions
  MIPS: SNI: Convert to new irq_chip functions
  MIPS: Sibyte: Convert to new irq_chip functions
  MIPS: IP32: Convert to new irq_chip functions
  MIPS: IP27: Convert to new irq_chip functions
  MIPS: IP22/IP28: Convert to new irq_chip functions
  MIPS: RB532: Convert to new irq_chip functions
  MIPS: PowerTV: Convert to new irq_chip functions
  MIPS: PNX8550: Convert to new irq_chip functions
  MIPS: PNX83xx: Convert to new irq_chip functions
  MIPS: msp71xx: Convert to new irq_chip functions
  MIPS: Loongson: Convert to new irq_chip functions
  MIPS: Use generic show_interrupts()
  MIPS: SMTC: Cleanup the hook mess and use irq_data
  MIPS: SMTC: Use irq_data in smtc_forward_irq()
  ...

commit b515498f ("userns: add a user namespace owner of ipc ns") added a
user namespace owner of ipc ns, but it also introduced a use after free in
free_ipc_ns().
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0bc825d2 ("codafs: fix compile warning when CONFIG_SYSCTL=n")
introduces build breakage, when CONFIG_PROC_SYSCTL=n and
CONFIG_CODA_FS=y:

  fs/built-in.o: In function `init_coda':
  psdev.c:(.init.text+0xc02): undefined reference to `coda_sysctl_init'
  psdev.c:(.init.text+0xc7c): undefined reference to `coda_sysctl_clean'
  fs/built-in.o: In function `exit_coda':
  psdev.c:(.exit.text+0xa9): undefined reference to `coda_sysctl_clean'
  make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>