Add a new admin command to support different queue size for Tx/Rx
queues (the change also support different SQ/CQ sizes)
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Radulescu says:

====================
dpaa2-eth: Add support for MQPRIO offloading

Add support for adding multiple TX traffic classes with mqprio. We can have
up to one netdev queue and hardware frame queue per TC per core.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement mqprio qdisc support by mapping traffic classes to
different hardware enqueue priorities. The maximum number of
supported traffic classes is an attribute of each DPNI object.

The traffic classes map to hardware priorities from highest (0)
to lowest (highest prio number). The skb priority information
received from the stack is used to select the hardware Tx queue
on which to enqueue the frame.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DPNI objects can have multiple traffic classes, as reflected by
the num_tc attribute. Until now we ignored its value and only
used traffic class 0.

This patch adds support for multiple Tx traffic classes; we have
num_queues x num_tcs hardware queues available for each interface.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the code configuring xps on the netdev TX queues to a
separate function. A subsequent patch will need to call
this in another context as well.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add dependency to TI CPTS from Common CLK framework COMMON_CLK to fix
allyesconfig build for Powerpc:

drivers/net/ethernet/ti/cpts.c: In function 'cpts_of_mux_clk_setup':
drivers/net/ethernet/ti/cpts.c:567:2: error: implicit declaration of function 'of_clk_parent_fill'; did you mean 'of_clk_get_parent_name'? [-Werror=implicit-function-declaration]
  of_clk_parent_fill(refclk_np, parent_names, num_parents);
  ^~~~~~~~~~~~~~~~~~
  of_clk_get_parent_name

Fixes: a3047a81 ("net: ethernet: ti: cpts: add support for ext rftclk selection")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to specifically deal with phylink_of_phy_connect() returning
-ENODEV, because this can happen when a CPU/DSA port does connect
neither to a PHY, nor has a fixed-link property. This is a valid use
case that is permitted by the binding and indicates to the switch:
auto-configure port with maximum capabilities.

Fixes: 0e279218 ("net: dsa: Use PHYLINK for the CPU/DSA ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

During a port FDB dump operation, the mutex protecting the concurrent
access to the switch registers is currently held by the internal
mv88e6xxx_port_db_dump and mv88e6xxx_port_db_dump_fid helpers.

It must be held at the higher level in mv88e6xxx_port_fdb_dump which
is called directly by DSA through ds->ops->port_fdb_dump. Fix this.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add bindings for Wiznet's w5x00 series of SPI interfaced Ethernet chips.

Based on the bindings for microchip,enc28j60.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The w5X00 chip provides an SPI to Ethernet inteface. This patch allows
platform devices to be defined through the device tree.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

To remove rtnl lock dependency in tc filter update API when using ingress
Qdisc, set QDISC_CLASS_OPS_DOIT_UNLOCKED flag in ingress Qdisc_class_ops.

Ingress Qdisc ops don't require any modifications to be used without rtnl
lock on tc filter update path. Ingress implementation never changes its
q->block and only releases it when Qdisc is being destroyed. This means it
is enough for RTM_{NEWTFILTER|DELTFILTER|GETTFILTER} message handlers to
hold ingress Qdisc reference while using it without relying on rtnl lock
protection. Unlocked Qdisc ops support is already implemented in filter
update path by unlocked cls API patch set.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tls: add support for kernel-driven resync and nfp RX offload

This series adds TLS RX offload for NFP and completes the offload
by providing resync strategies.  When TLS data stream looses segments
or experiences reorder NIC can no longer perform in line offload.
Resyncs provide information about placement of records in the
stream so that offload can resume.

Existing TLS resync mechanisms are not a great fit for the NFP.
In particular the TX resync is hard to implement for packet-centric
NICs.  This patchset adds an ability to perform TX resync in a way
similar to the way initial sync is done - by calling down to the
driver when new record is created after driver indicated sync had
been lost.

Similarly on the RX side, we try to wait for a gap in the stream
and send record information for the next record.  This works very
well for RPC workloads which are the primary focus at this time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When TCP stream gets out of sync (driver stops receiving skbs
with expected TCP sequence numbers) request a TX resync from
the kernel.

We try to distinguish retransmissions from missed transmissions
by comparing the sequence number to expected - if it's further
than the expected one - we probably missed packets.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS offload drivers keep track of TCP seq numbers to make sure
the packets are fed into the HW in order.

When packets get dropped on the way through the stack, the driver
will get out of sync and have to use fallback encryption, but unless
TCP seq number is resynced it will never match the packets correctly
(or even worse - use incorrect record sequence number after TCP seq
wraps).

Existing drivers (mlx5) feed the entire record on every out-of-order
event, allowing FW/HW to always be in sync.

This patch adds an alternative, more akin to the RX resync.  When
driver sees a frame which is past its expected sequence number the
stream must have gotten out of order (if the sequence number is
smaller than expected its likely a retransmission which doesn't
require resync).  Driver will ask the stack to perform TX sync
before it submits the next full record, and fall back to software
crypto until stack has performed the sync.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently only RX direction is ever resynced, however, TX may
also get out of sequence if packets get dropped on the way to
the driver.  Rename the resync callback and add a direction
parameter.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set ethtool TLS RX feature based on NIC capabilities, and enable
TLS RX when connections are added for decryption.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable kernel-controlled RX resync and propagate TLS connection
RX resync from kernel TLS to firmware.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some control messages must be sent from atomic context.  The mailbox
takes sleeping locks and uses a waitqueue so add a "posted" version
of communication.

Trylock the semaphore and if that's successful kick of the device
communication.  The device communication will be completed from
a workqueue, which will also release the semaphore.

If locks are taken queue the message and return.  Schedule a
different workqueue to take the semaphore and run the communication.
Note that the there are currently no atomic users which would actually
need the return value, so all replies to posted messages are just
freed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need the name nfp_ccm_mbox_alloc() for allocating the mailbox
communication channel itself.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Firmware indicates when a packet has been decrypted by reusing the
currently unused BPF flag.  Transfer this information into the skb
and provide a statistic of all decrypted segments.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS offload device may lose sync with the TCP stream if packets
arrive out of order.  Drivers can currently request a resync at
a specific TCP sequence number.  When a record is found starting
at that sequence number kernel will inform the device of the
corresponding record number.

This requires the device to constantly scan the stream for a
known pattern (constant bytes of the header) after sync is lost.

This patch adds an alternative approach which is entirely under
the control of the kernel.  Kernel tracks records it had to fully
decrypt, even though TLS socket is in TLS_HW mode.  If multiple
records did not have any decrypted parts - it's a pretty strong
indication that the device is out of sync.

We choose the min number of fully encrypted records to be 2,
which should hopefully be more than will get retransmitted at
a time.

After kernel decides the device is out of sync it schedules a
resync request.  If the TCP socket is empty the resync gets
performed immediately.  If socket is not empty we leave the
record parser to resync when next record comes.

Before resync in message parser we peek at the TCP socket and
don't attempt the sync if the socket already has some of the
next record queued.

On resync failure (encrypted data continues to flow in) we
retry with exponential backoff, up to once every 128 records
(with a 16k record thats at most once every 2M of data).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

handle_device_resync() doesn't describe the function very well.
The function checks if resync should be issued upon parsing of
a new record.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS offload code casts record number to a u64.  The buffer
should be aligned to 8 bytes, but its actually a __be64, and
the rest of the TLS code treats it as big int.  Make the
offload callbacks take a byte array, drivers can make the
choice to do the ugly cast if they want to.

Prepare for copying the record number onto the stack by
defining a constant for max size of the byte array.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We subtract "TLS_HEADER_SIZE - 1" from req_seq, then if they
match we add the same constant to seq.  Just add it to seq,
and we don't have to touch req_seq.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable 'status' in  __packet_lookup_frame_in_block() is never used since
introduction in commit f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer
implementation."), we can remove it.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ASSERT_OVSL() in ovs_vport_del() is unnecessary because
ovs_vport_del() is only called by ovs_dp_detach_port() and
ovs_dp_detach_port() calls ASSERT_OVSL() too.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink_walk_start() needed to return an error code because of
rhashtable_walk_init(). but that was converted to rhashtable_walk_enter()
and it is a void type function. so now netlink_walk_start() doesn't need
any return value.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This test checks that route exceptions can be successfully listed and
flushed using ip -6 route {list,flush} cache.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Enable nexthop objects with IPv4 and IPv6 routes

This is the final set of the initial nexthop object work. When I
started this idea almost 2 years ago, it took 18 seconds to inject
700k+ IPv4 routes with 1 hop and about 28 seconds for 4-paths. Some
of that time was due to inefficiencies in 'ip', but most of it was
kernel side with excessive synchronize_rcu calls in ipv4, and redundant
processing validating a nexthop spec (device, gateway, encap). Worse,
the time increased dramatically as the number of legs in the routes
increased; for example, taking over 72 seconds for 16-path routes.

After this set, with increased dirty memory limits (fib_sync_mem sysctl),
an improved ip and nexthop objects a full internet fib (743,799 routes
based on a pull in January 2019) can be pushed to the kernel in 4.3
seconds. Even better, the time to insert is "almost" constant with
increasing number of paths. The 'almost constant' time is due to
expanding the nexthop definitions when generating notifications. A
follow on patch will be sent adding a sysctl that allows an admin to
avoid the nexthop expansion and truly get constant route insert time
regardless of the number of paths in a route! (Useful once all programs
used for a deployment that care about routes understand nexthop objects).

To be clear, 'ip' is used for benchmarking for no other reason than
'ip -batch' is a trivial to use for the tests. FRR, for example, better
manages nexthops and route changes and the way those are pushed to the
kernel and thus will have less userspace processing times than 'ip -batch'.

Patches 1-10 iterate over fib6_nh with a nexthop invoke a processing
function per fib6_nh. Prior to nexthop objects, a fib6_info referenced
a single fib6_nh. Multipath routes were added as separate fib6_info for
each leg of the route and linked as siblings:

    f6i -> sibling -> sibling ... -> sibling
     |                                   |
     +--------- multipath route ---------+

With nexthop objects a single fib6_info references an external
nexthop which may have a series of fib6_nh:

     f6i ---> nexthop ---> fib6_nh
                           ...
                           fib6_nh

making IPv6 routes similar to IPv4. The side effect is that a single
fib6_info now indirectly references a series of fib6_nh so the code
needs to walk each entry and call the local, per-fib6_nh processing
function.

Patches 11 and 13 wire up use of nexthops with fib entries for IPv4
and IPv6. With these commits you can actually use nexthops with routes.

Patch 12 is an optimization for IPv4 when using nexthops in the most
predominant use case (no metrics).

Patches 14 handles replace of a nexthop config.

Patches 15-18 add update pmtu and redirect tests to use both old and
new routing.

Patches 19 and 20 add new tests for the nexthop infrastructure. The first
is single nexthop is used by multiple prefixes to communicate with remote
hosts. This is on top of the functional tests already committed. The
second verifies multipath selection.

v4
- changed return to 'goto out' in patch 9 since the rcu_read_lock is
  held (noticed by Wei)

v3
- removed found arg in patch 7 and changed rt6_nh_remove_exception_rt
  to return 1 when a match is found for an exception

v2
- changed ++i to i++ in patches 1 and 14 as noticed by DaveM
- improved commit message for patch 14 (nexthop replace)
- removed the skip_fib argument to remove_nexthop; vestige of an
  older design
====================
Reviewed-By: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a version of router_multipath.sh that uses nexthop objects for
routes.

Ido requested a version that does not cause regressions with mlxsw
testing since it does not support nexthop objects yet.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tests where multiple FIB entries use the same nexthop object. Generate
per-cpu cached routes for each by running ping on each cpu, and then
generate exceptions unique to each prefix (remote host) with different
mtus.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a second pass to icmp_redirect.sh to use nexthop objects for
routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add routing setup using nexthop objects and repeat tests with
old and new routing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the route add commands to a new function called setup_routing_old.
The '_old' refers to the classic way of installing routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the block of code that runs a test and prints the verdict to a
new function, run_test.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for atomically upating a nexthop config.

When updating a nexthop, walk the lists of associated fib entries and
verify the new config is valid. Replace is done by swapping nh_info
for single nexthops - new config is applied to old nexthop struct, and
old config is moved to new nexthop struct. For nexthop groups the same
applies but for nh_group. In addition for groups the nh_parent reference
needs to be updated. The old config is released by calling __remove_nexthop
on the 'new' nexthop which now has the old config. This is done to avoid
messing around with the list_heads that track which fib entries are
using the nexthop.

After the swap of config data, bump the sequence counters for FIB entries
to invalidate any dst entries and send notifications to userspace. The
notifications include the new nexthop spec as well as any fib entries
using the updated nexthop struct.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for RTA_NH_ID attribute to allow a user to specify a
nexthop id to use with a route. fc_nh_id is added to fib6_config to
hold the value passed in the RTA_NH_ID attribute. If a nexthop id
is given, the gateway, device, encap and multipath attributes can
not be set.

Update ip6_route_del to check metric and protocol before nexthop
specs. If fc_nh_id is set, then it must match the id in the route
entry. Since IPv6 allows delete of a cached entry (an exception),
add ip6_del_cached_rt_nh to cycle through all of the fib6_nh in
a fib entry if it is using a nexthop.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Be optimistic about re-using a fib_info when nexthop id is given and
the route does not use metrics. Avoids a memory allocation which in
most cases is expected to be freed anyways.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for RTA_NH_ID attribute to allow a user to specify a
nexthop id to use with a route. fc_nh_id is added to fib_config to
hold the value passed in the RTA_NH_ID attribute. If a nexthop id
is given, the gateway, device, encap and multipath attributes can
not be set.

Update fib_nh_match to check ids on a route delete.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use nexthop_for_each_fib6_nh to call fib6_nh_mtu_change for each
fib6_nh in a nexthop for rt6_mtu_change_route. For __ip6_rt_update_pmtu,
we need to find the nexthop that correlates to the device and gateway
in the rt6_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>