commit ea168857 upstream.

The MSA ld_*/st_* assembler macros for when the toolchain doesn't
support MSA use addu to offset the base address. However it is a virtual
memory pointer so fix it to use PTR_ADDU which expands to daddu for
64-bit kernels.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13062/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8a3c8b48 upstream.

In revision 1.12 of the MSA specification, the copy_u.w instruction has
been removed for MIPS32 & the copy_u.d instruction has been removed for
MIPS64. Newer toolchains (eg. Codescape SDK essentials 2015.10) will
complain about this like so:

arch/mips/kernel/r4k_fpu.S:290: Error: opcode not supported on this
processor: mips32r2 (mips32r2) `copy_u.w $1,$w26[3]'

Since we always copy to the width of a GPR, simply use copy_s instead of
copy_u to fix this.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13061/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3484de7b upstream.

Due to datasheet, reserving 0xff800000~0xffffffff (8MB below 4GB) is
not enough for RS780E integrated GPU's TOM (top of memory) registers
and MSI/MSI-x memory region, so we reserve 0xfe000000~0xffffffff (32MB
below 4GB).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12889/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a95d0692 upstream.

After commit 92923ca3 ("mm: meminit: only set page reserved
in the memblock region"), the MIPS hibernation is broken. Because pages
in nosave data section should be "reserved", but currently they aren't
set to "reserved" at initialization. This patch makes hibernation work
again.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12888/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f5b556c9 upstream.

This makes the ath79 bootconsole behave the same way as the generic 8250
bootconsole.

Also waiting for TEMT (transmit buffer is empty) instead of just THRE
(transmit buffer is not full) ensures that all characters have been
transmitted before the real serial driver starts reconfiguring the serial
controller (which would sometimes result in garbage being transmitted.)
This change does not cause a visible performance loss.

In addition, this seems to fix a hang observed in certain configurations on
many AR7xxx/AR9xxx SoCs during autoconfig of the real serial driver.

A more complete follow-up patch will disable 8250 autoconfig for ath79
altogether (the serial controller is detected as a 16550A, which is not
fully compatible with the ath79 serial, and the autoconfig may lead to
undefined behavior on ath79.)
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 820880cd upstream.

Commit d5ece1cb ("Fix ld-version.sh to handle large 3rd version
part") modifies the ld version description. This causes a build error
on Loongson-3, so fix it.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12890/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 37d22a0d upstream.

It's possible for pages to become visible prior to update_mmu_cache
running if a thread within the same address space preempts the current
thread or runs simultaneously on another CPU. That is, the following
scenario is possible:

    CPU0                            CPU1

    write to page
    flush_dcache_page
    flush_icache_page
    set_pte_at
                                    map page
    update_mmu_cache

If CPU1 maps the page in between CPU0's set_pte_at, which marks it valid
& visible, and update_mmu_cache where the dcache flush occurs then CPU1s
icache will fill from stale data (unless it fills from the dcache, in
which case all is good, but most MIPS CPUs don't have this property).
Commit 4d46a67a ("MIPS: Fix race condition in lazy cache flushing.")
attempted to fix that by performing the dcache flush in
flush_icache_page such that it occurs before the set_pte_at call makes
the page visible. However it has the problem that not all code that
writes to pages exposed to userland call flush_icache_page. There are
many callers of set_pte_at under mm/ and only 2 of them do call
flush_icache_page. Thus the race window between a page becoming visible
& being coherent between the icache & dcache remains open in some cases.

To illustrate some of the cases, a WARN was added to __update_cache with
this patch applied that triggered in cases where a page about to be
flushed from the dcache was not the last page provided to
flush_icache_page. That is, backtraces were obtained for cases in which
the race window is left open without this patch. The 2 standout examples
follow.

When forking a process:

[   15.271842] [<80417630>] __update_cache+0xcc/0x188
[   15.277274] [<80530394>] copy_page_range+0x56c/0x6ac
[   15.282861] [<8042936c>] copy_process.part.54+0xd40/0x17ac
[   15.289028] [<80429f80>] do_fork+0xe4/0x420
[   15.293747] [<80413808>] handle_sys+0x128/0x14c

When exec'ing an ELF binary:

[   14.445964] [<80417630>] __update_cache+0xcc/0x188
[   14.451369] [<80538d88>] move_page_tables+0x414/0x498
[   14.457075] [<8055d848>] setup_arg_pages+0x220/0x318
[   14.462685] [<805b0f38>] load_elf_binary+0x530/0x12a0
[   14.468374] [<8055ec3c>] search_binary_handler+0xbc/0x214
[   14.474444] [<8055f6c0>] do_execveat_common+0x43c/0x67c
[   14.480324] [<8055f938>] do_execve+0x38/0x44
[   14.485137] [<80413808>] handle_sys+0x128/0x14c

These code paths write into a page, call flush_dcache_page then call
set_pte_at without flush_icache_page inbetween. The end result is that
the icache can become corrupted & userland processes may execute
unexpected or invalid code, typically resulting in a reserved
instruction exception, a trap or a segfault.

Fix this race condition fully by performing any cache maintenance
required to keep the icache & dcache in sync in set_pte_at, before the
page is made valid. This has the added bonus of ensuring the cache
maintenance always happens in one location, rather than being duplicated
in flush_icache_page & update_mmu_cache. It also matches the way other
architectures solve the same problem (see arm, ia64 & powerpc).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Cc: Lars Persson <lars.persson@axis.com>
Fixes: 4d46a67a ("MIPS: Fix race condition in lazy cache flushing.")
Cc: Steven J. Hill <sjhill@realitydiluted.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12722/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f4281bba upstream.

The following patch will expose __update_cache to highmem pages. Handle
them by mapping them in for the duration of the cache maintenance, just
like in __flush_dcache_page. The code for that isn't shared because we
need the page address in __update_cache so sharing became messy. Given
that the entirity is an extra 5 lines, just duplicate it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12721/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 234859e4 upstream.

When flush_dcache_page is called on an executable page, that page is
about to be provided to userland & we can presume that the icache
contains no valid entries for its address range. However if the icache
does not fill from the dcache then we cannot presume that the pages
content has been written back as far as the memories that the dcache
will fill from (ie. L2 or further out).

This was being done for lowmem pages, but not for highmem which can lead
to icache corruption. Fix this by mapping highmem pages & flushing their
content from the dcache in __flush_dcache_page before providing the page
to userland, just as is done for lowmem pages.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12720/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a7e89326 upstream.

Commit f51246ef ("MIPS: Get rid of finish_arch_switch().") moved the
__restore_watch() call from finish_arch_switch() (i.e. after resume()
returns) to before the resume() call in switch_to(). This results in
watchpoints only being restored when a task is descheduled, preventing
the watchpoints from being effective most of the time, except due to
chance before the watchpoints are lazily removed.

Fix the call sequence from switch_to() through to
mips_install_watch_registers() to pass the task_struct pointer of the
next task, instead of using current. This allows the watchpoints for the
next (non-current) task to be restored without reintroducing
finish_arch_switch().

Fixes: f51246ef ("MIPS: Get rid of finish_arch_switch().")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12726/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 987e5b83 upstream.

Since commit 8cb48fe1 ("MIPS: Provide correct siginfo_t.si_stime"),
MIPS' uapi/asm/siginfo.h has included uapi/asm-generic/siginfo.h
directly before defining MIPS' struct siginfo, in order to get the
necessary definitions needed for the siginfo struct without the generic
copy_siginfo() hitting compiler errors due to struct siginfo not yet
being defined.

Now that the generic copy_siginfo() is moved out to linux/signal.h we
can safely include asm-generic/siginfo.h before defining the MIPS
specific struct siginfo, which avoids the uapi/ include as well as
breakage due to generic copy_siginfo() being defined before struct
siginfo.
Reported-by: Christopher Ferris <cferris@google.com>
Fixes: 8cb48fe1 ("MIPS: Provide correct siginfo_t.si_stime")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Petr Malat <oss@malat.biz>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5daebc47 upstream.

Commit 85efde6f ("make exported headers use strict posix types")
changed the asm-generic siginfo.h to use the __kernel_* types, and
commit 3a471cbc ("remove __KERNEL_STRICT_NAMES") make the internal
types accessible only to the kernel, but the MIPS implementation hasn't
been updated to match.

Switch to proper types now so that the exported asm/siginfo.h won't
produce quite so many compiler errors when included alone by a user
program.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Christopher Ferris <cferris@google.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12477/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 81a76d71 upstream.

When showing backtraces in response to traps, for example crashes and
address errors (usually unaligned accesses) when they are set in debugfs
to be reported, unwind_stack will be used if the PC was in the kernel
text address range. However since EVA it is possible for user and kernel
address ranges to overlap, and even without EVA userland can still
trigger an address error by jumping to a KSeg0 address.

Adjust the check to also ensure that it was running in kernel mode. I
don't believe any harm can come of this problem, since unwind_stack() is
sufficiently defensive, however it is only meant for unwinding kernel
code, so to be correct it should use the raw backtracing instead.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11701/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit d2941a975ac745c607dfb590e92bb30bc352dad9)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a816b306 upstream.

When unwinding through IRQs and exceptions, the unwinding only continues
if the PC is a kernel text address, however since EVA it is possible for
user and kernel address ranges to overlap, potentially allowing
unwinding to continue to user mode if the user PC happens to be in the
kernel text address range.

Adjust the check to also ensure that the register state from before the
exception is actually running in kernel mode, i.e. !user_mode(regs).

I don't believe any harm can come of this problem, since the PC is only
output, the stack pointer is checked to ensure it resides within the
task's stack page before it is dereferenced in search of the return
address, and the return address register is similarly only output (if
the PC is in a leaf function or the beginning of a non-leaf function).

However unwind_stack() is only meant for unwinding kernel code, so to be
correct the unwind should stop there.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11700/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e49d3848 upstream.

Fix a build regression from commit c9017757 ("MIPS: init upper 64b
of vector registers when MSA is first used"):

arch/mips/built-in.o: In function `enable_restore_fp_context':
traps.c:(.text+0xbb90): undefined reference to `_init_msa_upper'
traps.c:(.text+0xbb90): relocation truncated to fit: R_MIPS_26 against `_init_msa_upper'
traps.c:(.text+0xbef0): undefined reference to `_init_msa_upper'
traps.c:(.text+0xbef0): relocation truncated to fit: R_MIPS_26 against `_init_msa_upper'

to !CONFIG_CPU_HAS_MSA configurations with older GCC versions, which are
unable to figure out that calls to `_init_msa_upper' are indeed dead.
Of the many ways to tackle this failure choose the approach we have
already taken in `thread_msa_context_live'.

[ralf@linux-mips.org: Drop patch segment to junk file.]
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13271/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ab4a92e6 upstream.

When emulating a jalr instruction with rd == $0, the code in
isBranchInstr was incorrectly writing to GPR $0 which should actually
always remain zeroed. This would lead to any further instructions
emulated which use $0 operating on a bogus value until the task is next
context switched, at which point the value of $0 in the task context
would be restored to the correct zero by a store in SAVE_SOME. Fix this
by not writing to rd if it is $0.

Fixes: 102cedc3 ("MIPS: microMIPS: Floating point support.")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13160/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 41fa29e4 upstream.

Error recovery pointers for fixups was improperly set as ".word"
which is unsuitable for MIPS64.

Replaced by STR(PTR)

[ralf@linux-mips.org: Apply changes as requested in the review process.]
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: b0a668fb ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Cc: macro@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9911/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ab47036d upstream.

Below backtrace info was reported by Yunlei He:

Call Trace:
 [<ffffffff817a9395>] schedule+0x35/0x80
 [<ffffffff817abb7d>] rwsem_down_read_failed+0xed/0x130
 [<ffffffff813c12a8>] call_rwsem_down_read_failed+0x18/0x
 [<ffffffff817ab1d0>] down_read+0x20/0x30
 [<ffffffffa02a1a12>] f2fs_evict_inode+0x242/0x3a0 [f2fs]
 [<ffffffff81217057>] evict+0xc7/0x1a0
 [<ffffffff81217cd6>] iput+0x196/0x200
 [<ffffffff812134f9>] __dentry_kill+0x179/0x1e0
 [<ffffffff812136f9>] dput+0x199/0x1f0
 [<ffffffff811fe77b>] __fput+0x18b/0x220
 [<ffffffff811fe84e>] ____fput+0xe/0x10
 [<ffffffff81097427>] task_work_run+0x77/0x90
 [<ffffffff81074d62>] exit_to_usermode_loop+0x73/0xa2
 [<ffffffff81003b7a>] do_syscall_64+0xfa/0x110
 [<ffffffff817acf65>] entry_SYSCALL64_slow_path+0x25/0x25

Call Trace:
 [<ffffffff817a9395>] schedule+0x35/0x80
 [<ffffffff81216dc3>] __wait_on_freeing_inode+0xa3/0xd0
 [<ffffffff810bc300>] ? autoremove_wake_function+0x40/0x4
 [<ffffffff8121771d>] find_inode_fast+0x7d/0xb0
 [<ffffffff8121794a>] ilookup+0x6a/0xd0
 [<ffffffffa02bc740>] sync_node_pages+0x210/0x650 [f2fs]
 [<ffffffff8122e690>] ? do_fsync+0x70/0x70
 [<ffffffffa02b085e>] block_operations+0x9e/0xf0 [f2fs]
 [<ffffffff8137b795>] ? bio_endio+0x55/0x60
 [<ffffffffa02b0942>] write_checkpoint+0x92/0xba0 [f2fs]
 [<ffffffff8117da57>] ? mempool_free_slab+0x17/0x20
 [<ffffffff8117de8b>] ? mempool_free+0x2b/0x80
 [<ffffffff8122e690>] ? do_fsync+0x70/0x70
 [<ffffffffa02a53e3>] f2fs_sync_fs+0x63/0xd0 [f2fs]
 [<ffffffff8129630f>] ? ext4_sync_fs+0xbf/0x190
 [<ffffffff8122e6b0>] sync_fs_one_sb+0x20/0x30
 [<ffffffff812002e9>] iterate_supers+0xb9/0x110
 [<ffffffff8122e7b5>] sys_sync+0x55/0x90
 [<ffffffff81003ae9>] do_syscall_64+0x69/0x110
 [<ffffffff817acf65>] entry_SYSCALL64_slow_path+0x25/0x25

With following excuting serials, we will set inline_node in inode page
after inode was unlinked, result in a deadloop described as below:
1. open file
2. write file
3. unlink file
4. write file
5. close file

Thread A				Thread B
 - dput
  - iput_final
   - inode->i_state |= I_FREEING
   - evict
    - f2fs_evict_inode
					 - f2fs_sync_fs
					  - write_checkpoint
					   - block_operations
					    - f2fs_lock_all (down_write(cp_rwsem))
     - f2fs_lock_op (down_read(cp_rwsem))
					    - sync_node_pages
					     - ilookup
					      - find_inode_fast
					       - __wait_on_freeing_inode
					         (wait on I_FREEING clear)

Here, we change to set inline_node flag only for linked inode for fixing.
Reported-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9c6837d upstream.

gcc-6 started warning by default about variables that are not
used anywhere and that are marked 'const', generating many
false positives in an allmodconfig build, e.g.:

arch/arm/mach-davinci/board-da830-evm.c:282:20: warning: 'da830_evm_emif25_pins' defined but not used [-Wunused-const-variable=]
arch/arm/plat-omap/dmtimer.c:958:34: warning: 'omap_timer_match' defined but not used [-Wunused-const-variable=]
drivers/bluetooth/hci_bcm.c:625:39: warning: 'acpi_bcm_default_gpios' defined but not used [-Wunused-const-variable=]
drivers/char/hw_random/omap-rng.c:92:18: warning: 'reg_map_omap4' defined but not used [-Wunused-const-variable=]
drivers/devfreq/exynos/exynos5_bus.c:381:32: warning: 'exynos5_busfreq_int_pm' defined but not used [-Wunused-const-variable=]
drivers/dma/mv_xor.c:1139:34: warning: 'mv_xor_dt_ids' defined but not used [-Wunused-const-variable=]

This is similar to the existing -Wunused-but-set-variable warning
that was added in an earlier release and that we disable by default
now and only enable when W=1 is set, so it makes sense to do
the same here. Once we have eliminated the majority of the
warnings for both, we can put them back into the default list.

We probably want this in backport kernels as well, to allow building
them with gcc-6 without introducing extra warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 305c2e71 upstream.

Now that we've done a more comprehensive fix with the intermediate
target state we can remove the previous hack introduced with commit
90a88d6e ("scsi: fix soft lockup in scsi_remove_target() on module
removal").
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f05795d3 upstream.

Add intermediate STARGET_REMOVE state to scsi_target_state to avoid
running into the BUG_ON() in scsi_target_reap(). The STARGET_REMOVE
state is only valid in the path from scsi_remove_target() to
scsi_target_destroy() indicating this target is going to be removed.

This re-fixes the problem introduced in commits bc3f02a7 ("[SCSI]
scsi_remove_target: fix softlockup regression on hot remove") and
40998193 ("scsi: restart list search after unlock in
scsi_remove_target") in a more comprehensive way.

[mkp: Included James' fix for scsi_target_destroy()]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 40998193Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 037369b8 upstream.

The HPFS filesystem used generic_show_options to produce string that is
displayed in /proc/mounts.  However, there is a problem that the options
may disappear after remount.  If we mount the filesystem with option1
and then remount it with option2, /proc/mounts should show both option1
and option2, however it only shows option2 because the whole option
string is replaced with replace_mount_options in hpfs_remount_fs.

To fix this bug, implement the hpfs_show_options function that prints
options that are currently selected.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 44d51706 upstream.

Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if
the kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: ce657611 ("hpfs: kstrdup() out of memory handling")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1900149c upstream.

Ezequiel reported that he's facing UBI going into read-only
mode after power cut. It turned out that this behavior happens
only when updating a static volume is interrupted and Fastmap is
used.

A possible trace can look like:
ubi0 warning: ubi_io_read_vid_hdr [ubi]: no VID header found at PEB 2323, only 0xFF bytes
ubi0 warning: ubi_eba_read_leb [ubi]: switch to read-only mode
CPU: 0 PID: 833 Comm: ubiupdatevol Not tainted 4.6.0-rc2-ARCH #4
Hardware name: SAMSUNG ELECTRONICS CO., LTD. 300E4C/300E5C/300E7C/NP300E5C-AD8AR, BIOS P04RAP 10/15/2012
0000000000000286 00000000eba949bd ffff8800c45a7b38 ffffffff8140d841
ffff8801964be000 ffff88018eaa4800 ffff8800c45a7bb8 ffffffffa003abf6
ffffffff850e2ac0 8000000000000163 ffff8801850e2ac0 ffff8801850e2ac0
Call Trace:
[<ffffffff8140d841>] dump_stack+0x63/0x82
[<ffffffffa003abf6>] ubi_eba_read_leb+0x486/0x4a0 [ubi]
[<ffffffffa00453b3>] ubi_check_volume+0x83/0xf0 [ubi]
[<ffffffffa0039d97>] ubi_open_volume+0x177/0x350 [ubi]
[<ffffffffa00375d8>] vol_cdev_open+0x58/0xb0 [ubi]
[<ffffffff8124b08e>] chrdev_open+0xae/0x1d0
[<ffffffff81243bcf>] do_dentry_open+0x1ff/0x300
[<ffffffff8124afe0>] ? cdev_put+0x30/0x30
[<ffffffff81244d36>] vfs_open+0x56/0x60
[<ffffffff812545f4>] path_openat+0x4f4/0x1190
[<ffffffff81256621>] do_filp_open+0x91/0x100
[<ffffffff81263547>] ? __alloc_fd+0xc7/0x190
[<ffffffff812450df>] do_sys_open+0x13f/0x210
[<ffffffff812451ce>] SyS_open+0x1e/0x20
[<ffffffff81a99e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4

UBI checks static volumes for data consistency and reads the
whole volume upon first open. If the volume is found erroneous
users of UBI cannot read from it, but another volume update is
possible to fix it. The check is performed by running
ubi_eba_read_leb() on every allocated LEB of the volume.
For static volumes ubi_eba_read_leb() computes the checksum of all
data stored in a LEB. To verify the computed checksum it has to read
the LEB's volume header which stores the original checksum.
If the volume header is not found UBI treats this as fatal internal
error and switches to RO mode. If the UBI device was attached via a
full scan the assumption is correct, the volume header has to be
present as it had to be there while scanning to get known as mapped.
If the attach operation happened via Fastmap the assumption is no
longer correct. When attaching via Fastmap UBI learns the mapping
table from Fastmap's snapshot of the system state and not via a full
scan. It can happen that a LEB got unmapped after a Fastmap was
written to the flash. Then UBI can learn the LEB still as mapped and
accessing it returns only 0xFF bytes. As UBI is not a FTL it is
allowed to have mappings to empty PEBs, it assumes that the layer
above takes care of LEB accounting and referencing.
UBIFS does so using the LEB property tree (LPT).
For static volumes UBI blindly assumes that all LEBs are present and
therefore special actions have to be taken.

The described situation can happen when updating a static volume is
interrupted, either by a user or a power cut.
The volume update code first unmaps all LEBs of a volume and then
writes LEB by LEB. If the sequence of operations is interrupted UBI
detects this either by the absence of LEBs, no volume header present
at scan time, or corrupted payload, detected via checksum.
In the Fastmap case the former method won't trigger as no scan
happened and UBI automatically thinks all LEBs are present.
Only by reading data from a LEB it detects that the volume header is
missing and incorrectly treats this as fatal error.
To deal with the situation ubi_eba_read_leb() from now on checks
whether we attached via Fastmap and handles the absence of a
volume header like a data corruption error.
This way interrupted static volume updates will correctly get detected
also when Fastmap is used.
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 56244ef1 upstream.

When btrfs_copy_from_user isn't able to copy all of the pages, we need
to adjust our accounting to reflect the work that was actually done.

Commit 2e78c927 changed around the decisions a little and we ended up
skipping the accounting adjustments some of the time.  This commit makes
sure that when we don't copy anything at all, we still hop into
the adjustments, and switches to release_bytes instead of write_bytes,
since write_bytes isn't aligned.

The accounting errors led to warnings during btrfs_destroy_inode:

[   70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0
[   70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk
[   70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G        W 4.6.0-rc6_00062_g2997da1-dirty #23
[   70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[   70.847542]  0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202
[   70.847543]  0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08
[   70.847547]  ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28
[   70.847547] Call Trace:
[   70.847550]  [<ffffffff8149d5e9>] dump_stack+0x51/0x78
[   70.847551]  [<ffffffff8107bdfd>] __warn+0xfd/0x120
[   70.847553]  [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20
[   70.847555]  [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0
[   70.847556]  [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140
[   70.847558]  [<ffffffff812004b3>] destroy_inode+0x43/0x70
[   70.847559]  [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40
[   70.847560]  [<ffffffff81200c68>] evict+0x148/0x1d0
[   70.847562]  [<ffffffff81398ade>] ? start_transaction+0x3de/0x460
[   70.847564]  [<ffffffff81200d49>] dispose_list+0x59/0x80
[   70.847565]  [<ffffffff81201ba0>] evict_inodes+0x180/0x190
[   70.847566]  [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50
[   70.847568]  [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100
[   70.847569]  [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20
[   70.847571]  [<ffffffff811e9796>] kill_anon_super+0x16/0x30
[   70.847573]  [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130
[   70.847574]  [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90
[   70.847576]  [<ffffffff811e9e61>] deactivate_super+0x51/0x70
[   70.847577]  [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80
[   70.847579]  [<ffffffff81205402>] __cleanup_mnt+0x12/0x20
[   70.847581]  [<ffffffff81098358>] task_work_run+0x68/0xa0
[   70.847582]  [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0
[   70.847583]  [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170
[   70.847586]  [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25

This is the test program I used to force short returns from
btrfs_copy_from_user

void *dontneed(void *arg)
{
	char *p = arg;
	int ret;

	while(1) {
		ret = madvise(p, BUFSIZE/4, MADV_DONTNEED);
		if (ret) {
			perror("madvise");
			exit(1);
		}
	}
}

int main(int ac, char **av) {
	int ret;
	int fd;
	char *filename;
	unsigned long offset;
	char *buf;
	int i;
	pthread_t tid;

	if (ac != 2) {
		fprintf(stderr, "usage: dammitdave filename\n");
		exit(1);
	}

	buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE,
		   MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	if (buf == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}
	memset(buf, 'a', BUFSIZE);
	filename = av[1];

	ret = pthread_create(&tid, NULL, dontneed, buf);
	if (ret) {
		fprintf(stderr, "error %d from pthread_create\n", ret);
		exit(1);
	}

	ret = pthread_detach(tid);
	if (ret) {
		fprintf(stderr, "pthread detach failed %d\n", ret);
		exit(1);
	}

	while (1) {
		fd = open(filename, O_RDWR | O_CREAT, 0600);
		if (fd < 0) {
			perror("open");
			exit(1);
		}

		for (i = 0; i < ROUNDS; i++) {
			int this_write = BUFSIZE;

			offset = rand() % MAXSIZE;
			ret = pwrite(fd, buf, this_write, offset);
			if (ret < 0) {
				perror("pwrite");
				exit(1);
			} else if (ret != this_write) {
				fprintf(stderr, "short write to %s offset %lu ret %d\n",
					filename, offset, ret);
				exit(1);
			}
			if (i == ROUNDS - 1) {
				ret = sync_file_range(fd, offset, 4096,
				    SYNC_FILE_RANGE_WRITE);
				if (ret < 0) {
					perror("sync_file_range");
					exit(1);
				}
			}
		}
		ret = ftruncate(fd, 0);
		if (ret < 0) {
			perror("ftruncate");
			exit(1);
		}
		ret = close(fd);
		if (ret) {
			perror("close");
			exit(1);
		}
		ret = unlink(filename);
		if (ret) {
			perror("unlink");
			exit(1);
		}

	}
	return 0;
}
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Dave Jones <dsj@fb.com>
Fixes: 2e78c927Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4c63c245 upstream.

32-bit ioctl uses these rather than the regular FS_IOC_* versions. They can
be handled in btrfs using the same code. Without this, 32-bit {ch,ls}attr
fail.
Signed-off-by: Luke Dashjr <luke-jr+git@utopios.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ca9eb49a upstream.

The generic copy_siginfo() is currently defined in
asm-generic/siginfo.h, after including uapi/asm-generic/siginfo.h which
defines the generic struct siginfo. However this makes it awkward for an
architecture to use it if it has to define its own struct siginfo (e.g.
MIPS and potentially IA64), since it means that asm-generic/siginfo.h
can only be included after defining the arch-specific siginfo, which may
be problematic if the arch-specific definition needs definitions from
uapi/asm-generic/siginfo.h.

It is possible to work around this by first including
uapi/asm-generic/siginfo.h to get the constants before defining the
arch-specific siginfo, and include asm-generic/siginfo.h after. However
uapi headers can't be included by other uapi headers, so that first
include has to be in an ifdef __kernel__, with the non __kernel__ case
including the non-UAPI header instead.

Instead of that mess, move the generic copy_siginfo() definition into
linux/signal.h, which allows an arch-specific uapi/asm/siginfo.h to
include asm-generic/siginfo.h and define the arch-specific siginfo, and
for the generic copy_siginfo() to see that arch-specific definition.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Petr Malat <oss@malat.biz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Christopher Ferris <cferris@google.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12478/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 092398dc upstream.

Introduced by upstream commit 70d9798b

The raid0 personality does not create mddev->thread as oposed to
other personalities leading to its unconditional access in
mddev_suspend() causing an oops.

Patch checks for mddev->thread in order to keep the
intention of aforementioned commit.

Fixes: 70d9798b ("MD: warn for potential deadlock")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2ffa9a5d upstream.

If tb_drom_read() fails, sw->drom is freed but not set to NULL.  sw->drom
is then freed again in the error path of tb_switch_alloc().

The bug can be triggered by unplugging a thunderbolt device shortly after
it is detected by the thunderbolt driver.

Clear sw->drom if tb_drom_read() fails.

[bhelgaas: add Fixes:, stable versions of interest]
Fixes: 343fcb8c ("thunderbolt: Fix nontrivial endpoint devices.")
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f83b2561 upstream.

Avoid that the following kernel oops occurs if memory pool
allocation fails:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa048d0a0>] ib_drain_rq+0x0/0x20 [ib_core]
Call Trace:
 [<ffffffffa04af386>] srp_create_target+0xca6/0x13a9 [ib_srp]
 [<ffffffff813cc863>] dev_attr_store+0x13/0x20
 [<ffffffff81214b50>] sysfs_kf_write+0x40/0x50
 [<ffffffff81213f1c>] kernfs_fop_write+0x13c/0x180
 [<ffffffff81197683>] __vfs_write+0x23/0xf0
 [<ffffffff81198744>] vfs_write+0xa4/0x1a0
 [<ffffffff81199a44>] SyS_write+0x44/0xa0
 [<ffffffff8159e3e9>] entry_SYSCALL_64_fastpath+0x1c/0xac

Fixes: 1dc7b1f1 ("IB/srp: use the new CQ API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 54f5c9c5 upstream.

Avoid that the following BUG() is triggered against a debug
kernel:

kernel BUG at include/linux/scatterlist.h:92!
RIP: 0010:[<ffffffffa0467199>]  [<ffffffffa0467199>] srp_map_idb+0x199/0x1a0 [ib_srp]
Call Trace:
 [<ffffffffa04685fa>] srp_map_data+0x84a/0x890 [ib_srp]
 [<ffffffffa0469674>] srp_queuecommand+0x1e4/0x610 [ib_srp]
 [<ffffffff813f5a5e>] scsi_dispatch_cmd+0x9e/0x180
 [<ffffffff813f8b07>] scsi_request_fn+0x477/0x610
 [<ffffffff81298ffe>] __blk_run_queue+0x2e/0x40
 [<ffffffff81299070>] blk_delay_work+0x20/0x30
 [<ffffffff81071f07>] process_one_work+0x197/0x480
 [<ffffffff81072239>] worker_thread+0x49/0x490
 [<ffffffff810787ea>] kthread+0xea/0x100
 [<ffffffff8159b632>] ret_from_fork+0x22/0x40

Fixes: f7f7aab1 ("IB/srp: Convert to new registration API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86c72d1c upstream.

Add the pin configuration value of this machine into the pin_quirk
table to make DELL1_MIC_NO_PRESENCE apply to this machine.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d727869 upstream.

Add support for ALC295/ALC3254.
They are simply compatible with ALC225 chip.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 423cd785 upstream.

The headphone has noise when playing sound or switching microphone sources.
It uses the same codec on XPS 13 9350, but with different subsystem ID.
Applying the fixup can solve the issue.
Also, changing the model name to better differentiate models.

v2: Reorder by device ID.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcd4f0db upstream.

Support new codecs for ALC234/ALC274/ALC294.
This three codecs was the same IC.
But bonding is not the same.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f75564d3 upstream.

The bar number is found in reg2 within the gdd. Therefore
we need to change the assigment from reg1 to reg2 which
is the correct location.
Signed-off-by: Andreas Werner <andreas.werner@men.de>
Fixes: '3764e82e' drivers: Introduce MEN Chameleon Bus
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9bf292bf upstream.

The MIC VOP driver does two successive reads from user space to read a
variable length data structure. Kernel memory corruption can result if
the data structure changes between the two reads. This patch disallows
the chance of this happening.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116651
Reported by: Pengfei Wang <wpengfeinudt@gmail.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c2985d00 upstream.

Commit 80f96427 ("NFSv4.x: Enforce the ca_maxreponsesize_cached
on the back channel") causes an oops when it receives a callback with
cachethis=yes.

[  109.667378] BUG: unable to handle kernel NULL pointer dereference at 00000000000002c8
[  109.669476] IP: [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4]
[  109.671216] PGD 0
[  109.671736] Oops: 0000 [#1] SMP
[  109.705427] CPU: 1 PID: 3579 Comm: nfsv4.1-svc Not tainted 4.5.0-rc1+ #1
[  109.706987] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
[  109.709468] task: ffff8800b4408000 ti: ffff88008448c000 task.ti: ffff88008448c000
[  109.711207] RIP: 0010:[<ffffffffa08a3e68>]  [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4]
[  109.713521] RSP: 0018:ffff88008448fca0  EFLAGS: 00010286
[  109.714762] RAX: ffff880081ee202c RBX: ffff8800b7b5b600 RCX: 0000000000000001
[  109.716427] RDX: 0000000000000008 RSI: 0000000000000008 RDI: 0000000000000000
[  109.718091] RBP: ffff88008448fda8 R08: 0000000000000000 R09: 000000000b000000
[  109.719757] R10: ffff880137786000 R11: ffff8800b7b5b600 R12: 0000000001000000
[  109.721415] R13: 0000000000000002 R14: 0000000053270000 R15: 000000000000000b
[  109.723061] FS:  0000000000000000(0000) GS:ffff880139640000(0000) knlGS:0000000000000000
[  109.724931] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  109.726278] CR2: 00000000000002c8 CR3: 0000000034d50000 CR4: 00000000001406e0
[  109.727972] Stack:
[  109.728465]  ffff880081ee202c ffff880081ee201c 000000008448fcc0 ffff8800baccb800
[  109.730349]  ffff8800baccc800 ffffffffa08d0380 0000000000000000 0000000000000000
[  109.732211]  ffff8800b7b5b600 0000000000000001 ffffffff81d073c0 ffff880081ee3090
[  109.734056] Call Trace:
[  109.734657]  [<ffffffffa03795d4>] svc_process_common+0x5c4/0x6c0 [sunrpc]
[  109.736267]  [<ffffffffa0379a4c>] bc_svc_process+0x1fc/0x360 [sunrpc]
[  109.737775]  [<ffffffffa08a2c2c>] nfs41_callback_svc+0x10c/0x1d0 [nfsv4]
[  109.739335]  [<ffffffff810cb380>] ? prepare_to_wait_event+0xf0/0xf0
[  109.740799]  [<ffffffffa08a2b20>] ? nfs4_callback_svc+0x50/0x50 [nfsv4]
[  109.742349]  [<ffffffff810a6998>] kthread+0xd8/0xf0
[  109.743495]  [<ffffffff810a68c0>] ? kthread_park+0x60/0x60
[  109.744776]  [<ffffffff816abc4f>] ret_from_fork+0x3f/0x70
[  109.746037]  [<ffffffff810a68c0>] ? kthread_park+0x60/0x60
[  109.747324] Code: cc 45 31 f6 48 8b 85 00 ff ff ff 44 89 30 48 8b 85 f8 fe ff ff 44 89 20 48 8b 9d 38 ff ff ff 48 8b bd 30 ff ff ff 48 85 db 74 4c <4c> 8b af c8 02 00 00 4d 8d a5 08 02 00 00 49 81 c5 98 02 00 00
[  109.754361] RIP  [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4]
[  109.756123]  RSP <ffff88008448fca0>
[  109.756951] CR2: 00000000000002c8
[  109.757738] ---[ end trace 2b8555511ab5dfb4 ]---
[  109.758819] Kernel panic - not syncing: Fatal exception
[  109.760126] Kernel Offset: disabled
[  118.938934] ---[ end Kernel panic - not syncing: Fatal exception

It doesn't unlock the table nor does it set the cps->clp pointer which
is later needed by nfs4_cb_free_slot().

Fixes: 80f96427 ("NFSv4.x: Enforce the ca_maxresponsesize_cached ...")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2e51f262 upstream.

The switch to elf_getshdr{num,strndx} post-dates the oldest tool chain
the kernel is supposed to be able to build with, so try to cope with
such an environment.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/732dae6872b7ff187d94f22bb699a12849d3fe04.1463430618.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>