- 09 Aug, 2012 10 commits
-
-
J. Bruce Fields authored
commit 2930d381 upstream. Actually, xfs and jfs can optionally be case insensitive; we'll handle that case in later patches. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Luis Henriques authored
commit b31b0219 upstream. commit 9ef449c6 ("[media] rc: Postpone ISR registration") fixed an early ISR registration on several drivers. It did however also introduced a bug by moving the invocation of pnp_port_start() to the end of the probe function. This patch fixes this issue by moving the invocation of pnp_port_start() to an earlier stage in the probe function. Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Mikael Pettersson authored
commit c6636005 upstream. Booting a 3.2, 3.3, or 3.4-rc4 kernel on an Atari using the `nfeth' ethernet device triggers a WARN_ONCE() in generic irq handling code on the first irq for that device: WARNING: at kernel/irq/handle.c:146 handle_irq_event_percpu+0x134/0x142() irq 3 handler nfeth_interrupt+0x0/0x194 enabled interrupts Modules linked in: Call Trace: [<000299b2>] warn_slowpath_common+0x48/0x6a [<000299c0>] warn_slowpath_common+0x56/0x6a [<00029a4c>] warn_slowpath_fmt+0x2a/0x32 [<0005b34c>] handle_irq_event_percpu+0x134/0x142 [<0005b34c>] handle_irq_event_percpu+0x134/0x142 [<0000a584>] nfeth_interrupt+0x0/0x194 [<001ba0a8>] schedule_preempt_disabled+0x0/0xc [<0005b37a>] handle_irq_event+0x20/0x2c [<0005add4>] generic_handle_irq+0x2c/0x3a [<00002ab6>] do_IRQ+0x20/0x32 [<0000289e>] auto_irqhandler_fixup+0x4/0x6 [<00003144>] cpu_idle+0x22/0x2e [<001b8a78>] printk+0x0/0x18 [<0024d112>] start_kernel+0x37a/0x386 [<0003021d>] __do_proc_dointvec+0xb1/0x366 [<0003021d>] __do_proc_dointvec+0xb1/0x366 [<0024c31e>] _sinittext+0x31e/0x9c0 After invoking the irq's handler the kernel sees !irqs_disabled() and concludes that the handler erroneously enabled interrupts. However, debugging shows that !irqs_disabled() is true even before the handler is invoked, which indicates a problem in the platform code rather than the specific driver. The warning does not occur in 3.1 or older kernels. It turns out that the ALLOWINT definition for Atari is incorrect. The Atari definition of ALLOWINT is ~0x400, the stated purpose of that is to avoid taking HSYNC interrupts. irqs_disabled() returns true if the 3-bit ipl & 4 is non-zero. The nfeth interrupt runs at ipl 3 (it's autovector 3), but 3 & 4 is zero so irqs_disabled() is false, and the warning above is generated. When interrupts are explicitly disabled, ipl is set to 7. When they are enabled, ipl is masked with ALLOWINT. On Atari this will result in ipl = 3, which blocks interrupts at ipl 3 and below. So how come nfeth interrupts at ipl 3 are received at all? That's because ipl is reset to 2 by Atari-specific code in default_idle(), again with the stated purpose of blocking HSYNC interrupts. This discrepancy means that ipl 3 can remain blocked for longer than intended. Both default_idle() and falcon_hblhandler() identify HSYNC with ipl 2, and the "Atari ST/.../F030 Hardware Register Listing" agrees, but ALLOWINT is defined as if HSYNC was ipl 3. [As an experiment I modified default_idle() to reset ipl to 3, and as expected that resulted in all nfeth interrupts being blocked.] The fix is simple: define ALLOWINT as ~0x500 instead. This makes arch_local_irq_enable() consistent with default_idle(), and prevents the !irqs_disabled() problems for ipl 3 interrupts. Tested on Atari running in an Aranym VM. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Tested-by: Michael Schmitz <schmitzmic@googlemail.com> (on Falcon/CT60) [Geert Uytterhoeven: This version applies to v3.2..v3.4.] Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Liang Li authored
partial of commit 8e8b41f9 upstream. As part of commit 463454b5 ("cfg80211: fix interface combinations check"), this extra check was introduced: if ((all_iftypes & used_iftypes) != used_iftypes) goto cont; However, most wireless NIC drivers did not advertise ADHOC in wiphy.iface_combinations[i].limits[] and hence we'll get -EBUSY when we bring up a ADHOC wlan with commands similar to: # iwconfig wlan0 mode ad-hoc && ifconfig wlan0 up In commit 8e8b41f9 ("cfg80211: enforce lack of interface combinations"), the change below fixes the issue: if (total == 1) return 0; But it also introduces other dependencies for stable. For example, a full cherry pick of 8e8b41f9 would introduce additional regressions unless we also start cherry picking driver specific fixes like the following: 9b4760e3 ath5k: add possible wiphy interface combinations 1ae2fc25 mac80211_hwsim: advertise interface combinations 20c8e8dc ath9k: add possible wiphy interface combinations And the purpose of the 'if (total == 1)' is to cover the specific use case (IBSS, adhoc) that was mentioned above. So we just pick the specific part out from 8e8b41f9 here. Doing so gives stable kernels a way to fix the change introduced by 463454b5, without having to make cherry picks specific to various NIC drivers. Signed-off-by:
Liang Li <liang.li@windriver.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
David Henningsson authored
commit 108cc108 upstream. Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. BugLink: https://bugs.launchpad.net/bugs/1026953Tested-by:
John McCarron <john.mccarron@canonical.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Paul Gortmaker authored
commit 2584f521 upstream. Also add information on where the respective trees are. Signed-off-by:
Rob Landley <rob@landley.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jarod Wilson authored
commit 4b71ca6b upstream. For one, the driver device pointer needs to be filled in, or the lirc core will refuse to load the driver. And we really need to wire up all the platform_device bits. This has been tested via the lirc sourceforge tree and verified to work, been sitting there for months, finally getting around to sending it. :\ CC: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Stefano Stabellini authored
commit b9e0d95c upstream. When the frontend and the backend reside on the same domain, even if we add pages to the m2p_override, these pages will never be returned by mfn_to_pfn because the check "get_phys_to_machine(pfn) != mfn" will always fail, so the pfn of the frontend will be returned instead (resulting in a deadlock because the frontend pages are already locked). INFO: task qemu-system-i38:1085 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. qemu-system-i38 D ffff8800cfc137c0 0 1085 1 0x00000000 ffff8800c47ed898 0000000000000282 ffff8800be4596b0 00000000000137c0 ffff8800c47edfd8 ffff8800c47ec010 00000000000137c0 00000000000137c0 ffff8800c47edfd8 00000000000137c0 ffffffff82213020 ffff8800be4596b0 Call Trace: [<ffffffff81101ee0>] ? __lock_page+0x70/0x70 [<ffffffff81a0fdd9>] schedule+0x29/0x70 [<ffffffff81a0fe80>] io_schedule+0x60/0x80 [<ffffffff81101eee>] sleep_on_page+0xe/0x20 [<ffffffff81a0e1ca>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81101ed7>] __lock_page+0x67/0x70 [<ffffffff8106f750>] ? autoremove_wake_function+0x40/0x40 [<ffffffff811867e6>] ? bio_add_page+0x36/0x40 [<ffffffff8110b692>] set_page_dirty_lock+0x52/0x60 [<ffffffff81186021>] bio_set_pages_dirty+0x51/0x70 [<ffffffff8118c6b4>] do_blockdev_direct_IO+0xb24/0xeb0 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff8118ca95>] __blockdev_direct_IO+0x55/0x60 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff811e91c8>] ext3_direct_IO+0xf8/0x390 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff81004b60>] ? xen_mc_flush+0xb0/0x1b0 [<ffffffff81104027>] generic_file_aio_read+0x737/0x780 [<ffffffff813bedeb>] ? gnttab_map_refs+0x15b/0x1e0 [<ffffffff811038f0>] ? find_get_pages+0x150/0x150 [<ffffffff8119736c>] aio_rw_vect_retry+0x7c/0x1d0 [<ffffffff811972f0>] ? lookup_ioctx+0x90/0x90 [<ffffffff81198856>] aio_run_iocb+0x66/0x1a0 [<ffffffff811998b8>] do_io_submit+0x708/0xb90 [<ffffffff81199d50>] sys_io_submit+0x10/0x20 [<ffffffff81a18d69>] system_call_fastpath+0x16/0x1b The explanation is in the comment within the code: We need to do this because the pages shared by the frontend (xen-blkfront) can be already locked (lock_page, called by do_read_cache_page); when the userspace backend tries to use them with direct_IO, mfn_to_pfn returns the pfn of the frontend, so do_blockdev_direct_IO is going to try to lock the same pages again resulting in a deadlock. A simplified call graph looks like this: pygrub QEMU ----------------------------------------------- do_read_cache_page io_submit | | lock_page ext3_direct_IO | bio_add_page | lock_page Internally the xen-blkback uses m2p_add_override to swizzle (temporarily) a 'struct page' to have a different MFN (so that it can point to another guest). It also can easily find out whether another pfn corresponding to the mfn exists in the m2p, and can set the FOREIGN bit in the p2m, making sure that mfn_to_pfn returns the pfn of the backend. This allows the backend to perform direct_IO on these pages, but as a side effect prevents the frontend from using get_user_pages_fast on them while they are being shared with the backend. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Vivek Goyal authored
commit 3f9a5aab upstream. add_disk() takes gendisk reference on request queue. If driver failed during initialization and never called add_disk() then that extra reference is not taken. That reference is put in put_disk(). floppy driver allocates the disk, allocates queue, sets disk->queue and then relizes that floppy controller is not present. It tries to tear down everything and tries to put a reference down in put_disk() which was never taken. In such error cases cleanup disk->queue before calling put_disk() so that we never try to put down a reference which was never taken in first place. Reported-and-tested-by:
Suresh Jayaraman <sjayaraman@suse.com> Tested-by:
Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de> Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Peter Zijlstra authored
commit 8323f26c upstream Stefan reported a crash on a kernel before a3e5d109 ("sched: Don't call task_group() too many times in set_task_rq()"), he found the reason to be that the multiple task_group() invocations in set_task_rq() returned different values. Looking at all that I found a lack of serialization and plain wrong comments. The below tries to fix it using an extra pointer which is updated under the appropriate scheduler locks. Its not pretty, but I can't really see another way given how all the cgroup stuff works. Reported-and-tested-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1340364965.18025.71.camel@twinsSigned-off-by:
Ingo Molnar <mingo@kernel.org> (backported to previous file names and layout) Signed-off-by:
-
- 04 Aug, 2012 2 commits
-
-
Ben Hutchings authored
-
Kevin Winchester authored
commit 141168c3 and commit 3f806e50 upstream. Several fields in struct cpuinfo_x86 were not defined for the !SMP case, likely to save space. However, those fields still have some meaning for UP, and keeping them allows some #ifdef removal from other files. The additional size of the UP kernel from this change is not significant enough to worry about keeping up the distinction: text data bss dec hex filename 4737168 506459 972040 6215667 5ed7f3 vmlinux.o.before 4737444 506459 972040 6215943 5ed907 vmlinux.o.after for a difference of 276 bytes for an example UP config. If someone wants those 276 bytes back badly then it should be implemented in a cleaner way. Signed-off-by:
Kevin Winchester <kjwinchester@gmail.com> Cc: Steffen Persvold <sp@numascale.com> Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
-
- 02 Aug, 2012 28 commits
-
-
Ben Hutchings authored
-
Joonsoo Kim authored
commit dc32f634 upstream. Commit a6bc32b8 ("mm: compaction: introduce sync-light migration for use by compaction") changed the declaration of migrate_pages() and migrate_huge_pages(). But it missed changing the argument of migrate_huge_pages() in soft_offline_huge_page(). In this case, we should call migrate_huge_pages() with MIGRATE_SYNC. Additionally, there is a mismatch between type the of argument and the function declaration for migrate_pages(). Signed-off-by:
Joonsoo Kim <js1304@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
David Rientjes <rientjes@google.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Maarten Lankhorst authored
commit ce806a30 upstream. Linear copy works by adding the offset to the buffer address, which may end up not being 16-byte aligned. Some tests I've written for prime_pcopy show that the engine allows this correctly, so the restriction on lowest 4 bits of address can be lifted safely. The comments added were by envyas, I think because I used a newer version. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> [bwh: Backported to 3.2: no # prefixes in nva3_copy.fuc] Signed-off-by:
-
Chris Mason authored
commit e9fbcb42 upstream. Each ordered operation has a free callback, and this was called with the worker spinlock held. Josef made the free callback also call iput, which we can't do with the spinlock. This drops the spinlock for the free operation and grabs it again before moving through the rest of the list. We'll circle back around to this and find a cleaner way that doesn't bounce the lock around so much. Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Jerome Glisse authored
commit ca2ccde5 upstream. To have DP behave like VGA/DVI we need to retrain the link on hotplug. For this to happen we need to force link training to happen by setting connector dpms to off before asking it turning it on again. v2: agd5f - drop the dp_get_link_status() change in atombios_dp.c for now. We still need the dpms OFF change. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jerome Glisse authored
commit 266dcba5 upstream. No need to retrain the link for passive adapters. v2: agd5f - no passive DP to VGA adapters, update comments - assign radeon_connector_atom_dig after we are sure we have a digital connector as analog connectors have different private data. - get new sink type before checking for retrain. No need to check if it's no longer a DP connection. Signed-off-by:
-
Jerome Glisse authored
commit 8d1c702a upstream. We want to print link status query failed only if it's an unexepected fail. If we query to see if we need link training it might be because there is nothing connected and thus link status query have the right to fail in that case. To avoid printing failure when it's expected, move the failure message to proper place. Signed-off-by:
-
Jerome Glisse authored
commit d1c7871d upstream. Retry label was at wrong place in function leading to memory leak. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lan Tianyu authored
commit f197ac13 upstream. In the ac.c, power_supply_register()'s return value is not checked. As a result, the driver's add() ops may return success even though the device failed to initialize. For example, some BIOS may describe two ACADs in the same DSDT. The second ACAD device will fail to register, but ACPI driver's add() ops returns sucessfully. The ACPI device will receive ACPI notification and cause OOPS. https://bugzilla.redhat.com/show_bug.cgi?id=772730Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
J. Bruce Fields authored
commit 0ec4f431 upstream. The only checks of the long argument passed to fcntl(fd,F_SETLEASE,.) are done after converting the long to an int. Thus some illegal values may be let through and cause problems in later code. [ They actually *don't* cause problems in mainline, as of Dave Jones's commit 8d657eb3 "Remove easily user-triggerable BUG from generic_setlease", but we should fix this anyway. And this patch will be necessary to fix real bugs on earlier kernels. ] Signed-off-by:
-
Mark Brown authored
commit 0ff97ebf upstream. Ever since the DAPM performance improvements we've been marking all widgets as not dirty after each DAPM run. Since _PRE and _POST events aren't part of the DAPM graph this has rendered them non-functional, they will never be marked dirty again and thus will never be run again. Fix this by skipping them when marking widgets as not dirty. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
-
Theodore Ts'o authored
commit 03179fe9 upstream. The function ext4_calc_metadata_amount() has side effects, although it's not obvious from its function name. So if we fail to claim space, regardless of whether we retry to claim the space again, or return an error, we need to undo these side effects. Otherwise we can end up incorrectly calculating the number of metadata blocks needed for the operation, which was responsible for an xfstests failure for test #271 when using an ext2 file system with delalloc enabled. Reported-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Brian Foster authored
commit 97795d2a upstream. If we hit a condition where we have allocated metadata blocks that were not appropriately reserved, we risk underflow of ei->i_reserved_meta_blocks. In turn, this can throw sbi->s_dirtyclusters_counter significantly out of whack and undermine the nondelalloc fallback logic in ext4_nonda_switch(). Warn if this occurs and set i_allocated_meta_blocks to avoid this problem. This condition is reproduced by xfstests 270 against ext2 with delalloc enabled: Mar 28 08:58:02 localhost kernel: [ 171.526344] EXT4-fs (loop1): delayed block allocation failed for inode 14 at logical offset 64486 with max blocks 64 with error -28 Mar 28 08:58:02 localhost kernel: [ 171.526346] EXT4-fs (loop1): This should not happen!! Data will be lost 270 ultimately fails with an inconsistent filesystem and requires an fsck to repair. The cause of the error is an underflow in ext4_da_update_reserve_space() due to an unreserved meta block allocation. Signed-off-by:
-
Daniel Drake authored
commit 55fc05b7 upstream. At http://dev.laptop.org/ticket/11980 we have determined that the Marvell CaFe SDHCI controller reports bad card presence during resume. It reports that no card is present even when it is. This is a regression -- resume worked back around 2.6.37. Around 400ms after resuming, a "card inserted" interrupt is generated, at which point it starts reporting presence. Work around this hardware oddity by setting the SDHCI_QUIRK_BROKEN_CARD_DETECTION flag. Thanks to Chris Ball for helping with diagnosis. Signed-off-by:
Daniel Drake <dsd@laptop.org> [stable@: please apply to 3.0+] Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Al Viro authored
commit bf6932f4 upstream. From Al Viro: BTW, speaking of struct file treatment related to sockets - there's this piece of code in iscsi: /* * The SCTP stack needs struct socket->file. */ if ((np->np_network_transport == ISCSI_SCTP_TCP) || (np->np_network_transport == ISCSI_SCTP_UDP)) { if (!new_sock->file) { new_sock->file = kzalloc( sizeof(struct file), GFP_KERNEL); For one thing, as far as I can see it'not true - sctp does *not* depend on socket->file being non-NULL; it does, in one place, check socket->file->f_flags for O_NONBLOCK, but there it treats NULL socket->file as "flag not set". Which is the case here anyway - the fake struct file created in __iscsi_target_login_thread() (and in iscsi_target_setup_login_socket(), with the same excuse) do *not* get that flag set. Moreover, it's a bloody serious violation of a bunch of asserts in VFS; all struct file instances should come from filp_cachep, via get_empty_filp() (or alloc_file(), which is a wrapper for it). FWIW, I'm very tempted to do this and be done with the entire mess: Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Dan Williams authored
commit b17caa17 upstream. commit 198439e4 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() commit 19252de6 [SCSI] libsas: fix wide port hotplug issues The above commits seem to have confused the return value of sas_ex_discover_dev which is non-zero on failure and sas_ex_join_wide_port which just indicates short circuiting discovery on already established ports. The result is random discovery failures depending on configuration. Calls to sas_ex_join_wide_port are the source of the trouble as its return value is errantly assigned to 'res'. Convert it to bool and stop returning its result up the stack. Tested-by:
Dan Melnic <dan.melnic@amd.com> Reported-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Jack Wang <jack_wang@usish.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Dan Williams authored
commit 26f2f199 upstream. Continue running revalidation until no more broadcast devices are discovered. Fixes cases where re-discovery completes too early in a domain with multiple expanders with pending re-discovery events. Servicing BCNs can get backed up behind error recovery. Signed-off-by:
-
Dan Williams authored
commit 57fc2e33 upstream. Rapid ata hotplug on a libsas controller results in cases where libsas is waiting indefinitely on eh to perform an ata probe. A race exists between scsi_schedule_eh() and scsi_restart_operations() in the case when scsi_restart_operations() issues i/o to other devices in the sas domain. When this happens the host state transitions from SHOST_RECOVERY (set by scsi_schedule_eh) back to SHOST_RUNNING and ->host_busy is non-zero so we put the eh thread to sleep even though ->host_eh_scheduled is active. Before putting the error handler to sleep we need to check if the host_state needs to return to SHOST_RECOVERY for another trip through eh. Since i/o that is released by scsi_restart_operations has been blocked for at least one eh cycle, this implementation allows those i/o's to run before another eh cycle starts to discourage hung task timeouts. Reported-by:
Tom Jackson <thomas.p.jackson@intel.com> Tested-by:
-
Dan Williams authored
commit 3b661a92 upstream. The following crash results from cases where the end_device has been removed before scsi_sysfs_add_sdev has had a chance to run. BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 IP: [<ffffffff8115e100>] sysfs_create_dir+0x32/0xb6 ... Call Trace: [<ffffffff8125e4a8>] kobject_add_internal+0x120/0x1e3 [<ffffffff81075149>] ? trace_hardirqs_on+0xd/0xf [<ffffffff8125e641>] kobject_add_varg+0x41/0x50 [<ffffffff8125e70b>] kobject_add+0x64/0x66 [<ffffffff8131122b>] device_add+0x12d/0x63a [<ffffffff814b65ea>] ? _raw_spin_unlock_irqrestore+0x47/0x56 [<ffffffff8107de15>] ? module_refcount+0x89/0xa0 [<ffffffff8132f348>] scsi_sysfs_add_sdev+0x4e/0x28a [<ffffffff8132dcbb>] do_scan_async+0x9c/0x145 ...teach scsi_sysfs_add_devices() to check for deleted devices() before trying to add them, and teach scsi_remove_target() how to remove targets that have not been added via device_add(). Reported-by:
Dariusz Majchrzak <dariusz.majchrzak@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit 940f5d47 upstream. When we call scsi_unprep_request() the command associated with the request gets destroyed and therefore drops its reference on the device. If this was the only reference, the device may get released and we end up with a NULL pointer deref when we call blk_requeue_request. Reported-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Bart Van Assche authored
commit 67bd9413 upstream. Use blk_queue_dead() to test whether the queue is dead instead of !sdev. Since scsi_prep_fn() may be invoked concurrently with __scsi_remove_device(), keep the queuedata (sdev) pointer in __scsi_remove_device(). This patch fixes a kernel oops that can be triggered by USB device removal. See also http://www.spinics.net/lists/linux-scsi/msg56254.html. Other changes included in this patch: - Swap the blk_cleanup_queue() and kfree() calls in scsi_host_dev_release() to make that code easier to grasp. - Remove the queue dead check from scsi_run_queue() since the queue state can change anyway at any point in that function where the queue lock is not held. - Remove the queue dead check from the start of scsi_request_fn() since it is redundant with the scsi_device_online() check. Reported-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Tejun Heo authored
commit 34f6055c upstream. There are a number of QUEUE_FLAG_DEAD tests. Add blk_queue_dead() macro and use it. This patch doesn't introduce any functional difference. Signed-off-by:
-
Dylan Reid authored
commit 9e76e6d0 upstream. Turn on the pin widget's PIN_OUT bit from playback prepare. The pin is enabled in open, but is disabled in hdmi_init_pin which is called during system resume. This causes a system suspend/resume during playback to mute HDMI/DP. Enabling the pin in prepare instead of open allows calling snd_pcm_prepare after a system resume to restore audio. Signed-off-by:
Dylan Reid <dgreid@chromium.org> Signed-off-by:
-
Michel Dänzer authored
commit f60ec4c7 upstream. This could previously fail if either of the enabled displays was using a horizontal resolution that is a multiple of 128, and only the leftmost column of the cursor was (supposed to be) visible at the right edge of that display. The solution is to move the cursor one pixel to the left in that case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33183Signed-off-by:
-
Joerg Roedel authored
commit 2c9195e9 upstream. This did not work because devices are not put into the pt_domain. Fix this. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> [bwh: Backported to 3.2: do not use iommu_dev_data::passthrough] Signed-off-by:
-
David Henningsson authored
commit 4e01ec63 upstream. This codec has a separate dmic path (separate dmic only ADC), and thus it looks mostly like ALC275. BugLink: https://bugs.launchpad.net/bugs/1025377Tested-by:
Ray Chen <ray.chen@canonical.com> Signed-off-by:
-
Tejun Heo authored
commit 65758202 upstream. Currently, all workqueue cpu hotplug operations run off CPU_PRI_WORKQUEUE which is higher than normal notifiers. This is to ensure that workqueue is up and running while bringing up a CPU before other notifiers try to use workqueue on the CPU. Per-cpu workqueues are supposed to remain working and bound to the CPU for normal CPU_DOWN_PREPARE notifiers. This holds mostly true even with workqueue offlining running with higher priority because workqueue CPU_DOWN_PREPARE only creates a bound trustee thread which runs the per-cpu workqueue without concurrency management without explicitly detaching the existing workers. However, if the trustee needs to create new workers, it creates unbound workers which may wander off to other CPUs while CPU_DOWN_PREPARE notifiers are in progress. Furthermore, if the CPU down is cancelled, the per-CPU workqueue may end up with workers which aren't bound to the CPU. While reliably reproducible with a convoluted artificial test-case involving scheduling and flushing CPU burning work items from CPU down notifiers, this isn't very likely to happen in the wild, and, even when it happens, the effects are likely to be hidden by the following successful CPU down. Fix it by using different priorities for up and down notifiers - high priority for up operations and low priority for down operations. Workqueue cpu hotplug operations will soon go through further cleanup. Signed-off-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Forest Bond authored
commit f1b00f4d upstream. Commit d83579e2 incorporated some changes from the vendor driver that made it newly important that the calculated hardware version correctly include the CHIP_92D bit, as all of the IS_92D_* macros were changed to depend on it. However, this bit was being unset for dual-mac, dual-phy devices. The vendor driver behavior was modified to not do this, but unfortunately this change was not picked up along with the others. This caused scanning in the 2.4GHz band to be broken, and possibly other bugs as well. This patch brings the version calculation logic in parity with the vendor driver in this regard, and in doing so fixes the regression. However, the version calculation code in general continues to be largely incoherent and messy, and needs to be cleaned up. Signed-off-by:
Forest Bond <forest.bond@rapidrollout.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
