- 21 Dec, 2019 40 commits
-
-
Dmitry Monakhov authored
commit 6ff33d99 upstream. Write only quotas which are dirty at entry. XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chengguang Xu authored
commit e705f4b8 upstream. Check err when partial == NULL is meaningless because partial == NULL means getting branch successfully without error. CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.netSigned-off-by:
Chengguang Xu <cgxu519@mykernel.net> Signed-off-by:
-
Dmitry Monakhov authored
commit df4bb5d1 upstream. There is a race window where quota was redirted once we drop dq_list_lock inside dqput(), but before we grab dquot->dq_lock inside dquot_release() TASK1 TASK2 (chowner) ->dqput() we_slept: spin_lock(&dq_list_lock) if (dquot_dirty(dquot)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->write_dquot(dquot); goto we_slept if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->release_dquot(dquot); dqget() mark_dquot_dirty() dqput() goto we_slept; } So dquot dirty quota will be released by TASK1, but on next we_sleept loop we detect this and call ->write_dquot() for it. XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107 Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
commit 6039f37d upstream. The bar values are little endian, not big endian. The pack function did it right but the unpack got it wrong. Fix it. Cc: stable@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Martin Bugge <marbugge@cisco.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 2c676f37 ("[media] hdmi: added unpack and logging functions for InfoFrames") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.comReviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Alastair D'Silva authored
commit f9ec1116 upstream. When calling __kernel_sync_dicache with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191104023305.9581-3-alastair@au1.ibm.comSigned-off-by:
-
Arnd Bergmann authored
commit 99817404 upstream. Going through the uses of timeval in the user space API, I noticed two bugs in ppdev that were introduced in the y2038 conversion: * The range check was accidentally moved from ppsettime to ppgettime * On sparc64, the microseconds are in the other half of the 64-bit word. Fix both, and mark the fix for stable backports. Cc: stable@vger.kernel.org Fixes: 3b9ab374 ("ppdev: convert to y2038 safe") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.deSigned-off-by:
-
H. Nikolaus Schaller authored
commit f6498b92 upstream. Pandora_wl1251_init_card was used to do special pdata based setup of the sdio mmc interface. This does no longer work with v4.7 and later. A fix requires a device tree based mmc3 setup. Therefore we move the special setup to omap_hsmmc.c instead of calling some pdata supplied init_card function. The new code checks for a DT child node compatible to wl1251 so it will not affect other MMC3 use cases. Generally, this code was and still is a hack and should be moved to mmc core to e.g. read such properties from optional DT child nodes. Fixes: 81eef6ca ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ [Ulf: Fixed up some checkpatch complaints] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit a322b337 upstream. Several functions use for_each_child_of_node() loop with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 9a2c1c3b ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 6fbbcb05 upstream. In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: af99a750 ("pinctrl: Add pinctrl-s3c24xx driver") Signed-off-by:
-
Rafael J. Wysocki authored
commit b9ea0bae upstream. Certain ACPI-enumerated devices represented as platform devices in Linux, like fans, require special low-level power management handling implemented by their drivers that is not in agreement with the ACPI PM domain behavior. That leads to problems with managing ACPI fans during system-wide suspend and resume. For this reason, make acpi_dev_pm_attach() skip the affected devices by adding a list of device IDs to avoid to it and putting the IDs of the affected devices into that list. Fixes: e5cc8ef3 (ACPI / PM: Provide ACPI PM callback routines for subsystems) Reported-by:
Zhang Rui <rui.zhang@intel.com> Tested-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Vamshi K Sthambamkadi authored
commit 627ead72 upstream. kmemleak reported backtrace: [<bbee0454>] kmem_cache_alloc_trace+0x128/0x260 [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0 [<1180f4fc>] i2c_register_adapter+0x186/0x400 [<6083baf7>] i2c_add_adapter+0x4e/0x70 [<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915] [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915] [<81911d4b>] i915_pci_probe+0x48/0x160 [i915] [<4b159af1>] pci_device_probe+0xdc/0x160 [<b3c64704>] really_probe+0x1ee/0x450 [<bc029f5a>] driver_probe_device+0x142/0x1b0 [<d8829d20>] device_driver_attach+0x49/0x50 [<de71f045>] __driver_attach+0xc9/0x150 [<df33ac83>] bus_for_each_dev+0x56/0xa0 [<80089bba>] driver_attach+0x19/0x20 [<cc73f583>] bus_add_driver+0x177/0x220 [<7b29d8c7>] driver_register+0x56/0xf0 In i2c_acpi_remove_space_handler(), a leak occurs whenever the "data" parameter is initialized to 0 before being passed to acpi_bus_get_private_data(). This is because the NULL pointer check in acpi_bus_get_private_data() (condition->if(!*data)) returns EINVAL and, in consequence, memory is never freed in i2c_acpi_remove_space_handler(). Fix the NULL pointer check in acpi_bus_get_private_data() to follow the analogous check in acpi_get_data_full(). Signed-off-by:
Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Francesco Ruggeri authored
commit 833a426c upstream. acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock before freeing the map. This creates a race condition the can result in the map being freed more than once. A panic can be caused by running for ((i=0; i<10; i++)) do for ((j=0; j<100000; j++)) do cat /sys/firmware/acpi/tables/data/BERT >/dev/null done & done This patch makes sure that only the process that drops the reference to 0 does the freeing. Fixes: b7c1fadd ("ACPI: Do not use krefs under a mutex in osl.c") Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Leonard Crestez authored
commit 2abb0d52 upstream. There is no locking in this sysfs show function so stats printing can race with a devfreq_update_status called as part of freq switching or with initialization. Also add an assert in devfreq_update_status to make it clear that lock must be held by caller. Fixes: 39688ce6 ("PM / devfreq: account suspend/resume for stats") Cc: stable@vger.kernel.org Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Zhenzhong Duan authored
commit 918c1fe9 upstream. Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has a driver different from drv already and, if so, return -EBUSY before updating any cpuidle_drivers per-CPU pointers. Fixes: 82467a5a ("cpuidle: simplify multiple driver support") Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> [ rjw: Subject & changelog ] Signed-off-by:
-
Johan Hovold authored
commit 1091eb83 upstream. If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50c ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 11609a7e upstream. If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebb ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Denis Efremov authored
commit 315cee42 upstream. memcpy() call with "idata == NULL && ilen == 0" results in undefined behavior in ar5523_cmd(). For example, NULL is passed in callchain "ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch adds ilen check before memcpy() call in ar5523_cmd() to prevent an undefined behavior. Cc: Pontus Fuchs <pontus.fuchs@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: stable@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Aleksa Sarai authored
commit a713af39 upstream. Because pids->limit can be changed concurrently (but we don't want to take a lock because it would be needlessly expensive), use atomic64_ts instead. Fixes: commit 49b786ea ("cgroup: implement the PIDs subsystem") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
Aleksa Sarai <cyphar@cyphar.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ming Lei authored
commit 8962842c upstream. It is reported that sysfs buffer overflow can be triggered if the system has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of hctx via /sys/block/$DEV/mq/$N/cpu_list. Use snprintf to avoid the potential buffer overflow. This version doesn't change the attribute format, and simply stops showing CPU numbers if the buffer is going to overflow. Cc: stable@vger.kernel.org Fixes: 676141e4("blk-mq: don't dump CPU -> hw queue map on driver load") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Pawel Harlozinski authored
commit 8f157d4f upstream. Check for existance of jack before tracing. NULL pointer dereference has been reported by KASAN while unloading machine driver (snd_soc_cnl_rt274). Signed-off-by:
Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Tejun Heo authored
commit e66b39af upstream. 008847f6 ("workqueue: allow rescuer thread to do more work.") made the rescuer worker requeue the pwq immediately if there may be more work items which need rescuing instead of waiting for the next mayday timer expiration. Unfortunately, it doesn't check whether the pwq is already on the mayday list and unconditionally gets the ref and moves it onto the list. This doesn't corrupt the list but creates an additional reference to the pwq. It got queued twice but will only be removed once. This leak later can trigger pwq refcnt warning on workqueue destruction and prevent freeing of the workqueue. Signed-off-by:
-
Tejun Heo authored
commit def98c84 upstream. Before actually destrying a workqueue, destroy_workqueue() checks whether it's actually idle. If it isn't, it prints out a bunch of warning messages and leaves the workqueue dangling. It unfortunately has a couple issues. * Mayday list queueing increments pwq's refcnts which gets detected as busy and fails the sanity checks. However, because mayday list queueing is asynchronous, this condition can happen without any actual work items left in the workqueue. * Sanity check failure leaves the sysfs interface behind too which can lead to init failure of newer instances of the workqueue. This patch fixes the above two by * If a workqueue has a rescuer, disable and kill the rescuer before sanity checks. Disabling and killing is guaranteed to flush the existing mayday list. * Remove sysfs interface before sanity checks. Signed-off-by:
Marcin Pawlowski <mpawlowski@fb.com> Reported-by:
"Williams, Gerald S" <gerald.s.williams@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit ca58f551 ] This is an alternative fix attemp for the issue reported in the commit caa8422d ("ALSA: hda: Flush interrupts on disabling") that was reverted later due to regressions. Instead of tweaking the hardware disablement order and the enforced irq flushing, do calling cancel_work_sync() of the unsol work early enough, and explicitly ignore the unsol events during the shutdown by checking the bus->shutdown flag. Fixes: caa8422d ("ALSA: hda: Flush interrupts on disabling") Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Greg Kroah-Hartman authored
commit 702600ee upstream. Newer versions of awk spit out these fun warnings: awk: ../lib/raid6/unroll.awk:16: warning: regexp escape sequence `\#' is not a known regexp operator As commit 700c1018 ("x86/insn: Fix awk regexp warnings") showed, it turns out that there are a number of awk strings that do not need to be escaped and newer versions of awk now warn about this. Fix the string up so that no warning is produced. The exact same kernel module gets created before and after this patch, showing that it wasn't needed. Link: https://lore.kernel.org/r/20191206152600.GA75093@kroah.comSigned-off-by:
-
Larry Finger authored
commit 330bb711 upstream. In commit 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers"), the flag that indicates that interrupts are enabled was never set. In addition, there are several places when enable/disable interrupts were commented out are restored. A sychronize_interrupts() call is removed. Fixes: 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
commit 3155db76 upstream. In commit 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback needed to check if the hardware has released a buffer indicating that a DMA operation is completed was not added. Fixes: 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
Larry Finger authored
commit 0e531cc5 upstream. In commit 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback to get the RX buffer address was added to the PCI driver. Unfortunately, driver rtl8192de was not modified appropriately and the code runs into a WARN_ONCE() call. The use of an incorrect array is also fixed. Fixes: 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # 3.18+ Signed-off-by:
-
Josef Bacik authored
commit 3e174099 upstream. Testing with the new fsstress support for subvolumes uncovered a pretty bad problem with rename exchange on subvolumes. We're modifying two different subvolumes, but we only start the transaction on one of them, so the other one is not added to the dirty root list. This is caught by btrfs_cow_block() with a warning because the root has not been updated, however if we do not modify this root again we'll end up pointing at an invalid root because the root item is never updated. Fix this by making sure we add the destination root to the trans list, the same as we do with normal renames. This fixes the corruption. Fixes: cdd1fedf ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT") CC: stable@vger.kernel.org # 4.9+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
commit fd0ddbe2 upstream. Backreference walking, which is used by send to figure if it can issue clone operations instead of write operations, can be very slow and use too much memory when extents have many references. This change simply skips backreference walking when an extent has more than 64 references, in which case we fallback to a write operation instead of a clone operation. This limit is conservative and in practice I observed no signicant slowdown with up to 100 references and still low memory usage up to that limit. This is a temporary workaround until there are speedups in the backref walking code, and as such it does not attempt to add extra interfaces or knobs to tweak the threshold. Reported-by:
Atemu <atemu.main@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Qu Wenruo authored
commit 34b127ae upstream. The last user of btrfs_bio::flags was removed in commit 326e1dbb ("block: remove management of bi_remaining when restoring original bi_end_io"), remove it. (Tagged for stable as the structure is heavily used and space savings are desirable.) CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Josef Bacik authored
commit 3797136b upstream. While testing 5.2 we ran into the following panic [52238.017028] BUG: kernel NULL pointer dereference, address: 0000000000000001 [52238.105608] RIP: 0010:drop_buffers+0x3d/0x150 [52238.304051] Call Trace: [52238.308958] try_to_free_buffers+0x15b/0x1b0 [52238.317503] shrink_page_list+0x1164/0x1780 [52238.325877] shrink_inactive_list+0x18f/0x3b0 [52238.334596] shrink_node_memcg+0x23e/0x7d0 [52238.342790] ? do_shrink_slab+0x4f/0x290 [52238.350648] shrink_node+0xce/0x4a0 [52238.357628] balance_pgdat+0x2c7/0x510 [52238.365135] kswapd+0x216/0x3e0 [52238.371425] ? wait_woken+0x80/0x80 [52238.378412] ? balance_pgdat+0x510/0x510 [52238.386265] kthread+0x111/0x130 [52238.392727] ? kthread_create_on_node+0x60/0x60 [52238.401782] ret_from_fork+0x1f/0x30 The page we were trying to drop had a page->private, but had no page->mapping and so called drop_buffers, assuming that we had a buffer_head on the page, and then panic'ed trying to deref 1, which is our page->private for data pages. This is happening because we're truncating the free space cache while we're trying to load the free space cache. This isn't supposed to happen, and I'll fix that in a followup patch. However we still shouldn't allow those sort of mistakes to result in messing with pages that do not belong to us. So add the page->mapping check to verify that we still own this page after dropping and re-acquiring the page lock. This page being unlocked as: btrfs_readpage extent_read_full_page __extent_read_full_page __do_readpage if (!nr) unlock_page <-- nr can be 0 only if submit_extent_page returns an error CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
David Hildenbrand authored
commit 63341ab0 upstream. In case we have to migrate a ballon page to a newpage of another zone, the managed page count of both zones is wrong. Paired with memory offlining (which will adjust the managed page count), we can trigger kernel crashes and all kinds of different symptoms. One way to reproduce: 1. Start a QEMU guest with 4GB, no NUMA 2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL 3. Inflate the balloon to 1GB 4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it) 5. Observe /proc/zoneinfo Node 0, zone Normal pages free 16810 min 24848885473806 low 18471592959183339 high 36918337032892872 spanned 262144 present 262144 managed 18446744073709533486 6. Do anything that requires some memory (e.g., inflate the balloon some more). The OOM goes crazy and the system crashes [ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00 [ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 [ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-20191204+ #75 [ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4 [ 238.341121] Call Trace: [ 238.341337] dump_stack+0x8f/0xd0 [ 238.341630] dump_header+0x61/0x5ea [ 238.341942] oom_kill_process.cold+0xb/0x10 [ 238.342299] out_of_memory+0x24d/0x5a0 [ 238.342625] __alloc_pages_slowpath+0xd12/0x1020 [ 238.343024] __alloc_pages_nodemask+0x391/0x410 [ 238.343407] pagecache_get_page+0xc3/0x3a0 [ 238.343757] filemap_fault+0x804/0xc30 [ 238.344083] ? ext4_filemap_fault+0x28/0x42 [ 238.344444] ext4_filemap_fault+0x30/0x42 [ 238.344789] __do_fault+0x37/0x1a0 [ 238.345087] __handle_mm_fault+0x104d/0x1ab0 [ 238.345450] handle_mm_fault+0x169/0x360 [ 238.345790] do_user_addr_fault+0x20d/0x490 [ 238.346154] do_page_fault+0x31/0x210 [ 238.346468] async_page_fault+0x43/0x50 [ 238.346797] RIP: 0033:0x7f47eba4197e [ 238.347110] Code: Bad RIP value. [ 238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293 [ 238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e [ 238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004 [ 238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033 [ 238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001 [ 238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0 [ 238.350878] Mem-Info: [ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0 [ 238.351085] active_file:12 inactive_file:7 isolated_file:0 [ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0 [ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170 [ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0 [ 238.351085] free:720717 free_pcp:2 free_cma:0 [ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss [ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB [ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884 [ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B [ 238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865 [ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB [ 238.364765] lowmem_reserve[]: 0 0 0 0 0 [ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B [ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B [ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B [ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 238.369915] 130 total pagecache pages [ 238.370241] 0 pages in swap cache [ 238.370533] Swap cache stats: add 0, delete 0, find 0/0 [ 238.370981] Free swap = 0kB [ 238.371239] Total swap = 0kB [ 238.371488] 1048445 pages RAM [ 238.371756] 0 pages HighMem/MovableOnly [ 238.372090] 306992 pages reserved [ 238.372376] 0 pages cma reserved [ 238.372661] 0 pages hwpoisoned In another instance (older kernel), I was able to observe this (negative page count :/): [ 180.896971] Offlined Pages 32768 [ 182.667462] Offlined Pages 32768 [ 184.408117] Offlined Pages 32768 [ 186.026321] Offlined Pages 32768 [ 187.684861] Offlined Pages 32768 [ 189.227013] Offlined Pages 32768 [ 190.830303] Offlined Pages 32768 [ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009 In another instance (older kernel), I was no longer able to start any process: [root@vm ~]# [ 214.348068] Offlined Pages 32768 [ 215.973009] Offlined Pages 32768 cat /proc/meminfo -bash: fork: Cannot allocate memory [root@vm ~]# cat /proc/meminfo -bash: fork: Cannot allocate memory Fix it by properly adjusting the managed page count when migrating if the zone changed. The managed page count of the zones now looks after unplug of the DIMM (and after deflating the balloon) just like before inflating the balloon (and plugging+onlining the DIMM). We'll temporarily modify the totalram page count. If this ever becomes a problem, we can fine tune by providing helpers that don't touch the totalram pages (e.g., adjust_zone_managed_page_count()). Please note that fixing up the managed page count is only necessary when we adjusted the managed page count when inflating - only if we don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the managed page count is not touched when inflating/deflating. Reported-by:
Yumei Huang <yuhuang@redhat.com> Fixes: 3dcc0571 ("mm: correctly update zone->managed_pages") Cc: <stable@vger.kernel.org> # v3.11+ Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Miquel Raynal authored
commit 69c7f461 upstream. Any write with either dd or flashcp to a device driven by the spear_smi.c driver will pass through the spear_smi_cpy_toio() function. This function will get called for chunks of up to 256 bytes. If the amount of data is smaller, we may have a problem if the data length is not 4-byte aligned. In this situation, the kernel panics during the memcpy: # dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6 spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256 spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256 spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256 spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233 Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8 [...] PC is at memcpy+0xcc/0x330 The above error occurs because the implementation of memcpy_toio() tries to optimize the number of I/O by writing 4 bytes at a time as much as possible, until there are less than 4 bytes left and then switches to word or byte writes. Unfortunately, the specification states about the Write Burst mode: "the next AHB Write request should point to the next incremented address and should have the same size (byte, half-word or word)" This means ARM architecture implementation of memcpy_toio() cannot reliably be used blindly here. Workaround this situation by update the write path to stick to byte access when the burst length is not multiple of 4. Fixes: f18dbbb1 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash") Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: stable@vger.kernel.org Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Pete Zaitcev authored
commit 19e6317d upstream. The problem arises because our read() function grabs a lock of the circular buffer, finds something of interest, then invokes copy_to_user() straight from the buffer, which in turn takes mm->mmap_sem. In the same time, the callback mon_bin_vma_fault() is invoked under mm->mmap_sem. It attempts to take the fetch lock and deadlocks. This patch does away with protecting of our page list with any semaphores, and instead relies on the kernel not close the device while mmap is active in a process. In addition, we prohibit re-sizing of a buffer while mmap is active. This way, when (now unlocked) fault is processed, it works with the page that is intended to be mapped-in, and not some other random page. Note that this may have an ABI impact, but hopefully no legitimate program is this wrong. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Reported-by: syzbot+56f9673bb4cdcbeb0e92@syzkaller.appspotmail.com Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Fixes: 46eb14a6 ("USB: fix usbmon BUG trigger") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191204203941.3503452b@suzdal.zaitcev.lanSigned-off-by:
-
Emiliano Ingrassia authored
commit 1cd17f7f upstream. Explicitly initialize URB structure urb_list field in usb_init_urb(). This field can be potentially accessed uninitialized and its initialization is coherent with the usage of list_del_init() in usb_hcd_unlink_urb_from_ep() and usb_giveback_urb_bh() and its explicit initialization in usb_hcd_submit_urb() error path. Signed-off-by:
Emiliano Ingrassia <ingrassia@epigenesys.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191127160355.GA27196@ingrassia.epigenesys.comSigned-off-by:
-
Johan Hovold authored
commit 3c11c4be upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 03270634 ("USB: Add ADU support for Ontrak ADU devices") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by:
-
Johan Hovold authored
commit 7c5a2df3 upstream. Make sure to use the current alternate setting when looking up the endpoints on epic devices to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 6e8cf775 ("USB: add EPIC support to the io_edgeport driver") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by:
-
Johan Hovold authored
commit 59920635 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 09068c1a upstream. Make sure that the interrupt interface has an endpoint before trying to access its endpoint descriptors to avoid dereferencing a NULL pointer. The driver binds to the interrupt interface with interface number 0, but must not assume that this interface or its current alternate setting are the first entries in the corresponding configuration arrays. Fixes: b72458a8 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver") Cc: stable <stable@vger.kernel.org> # 2.6.16 Signed-off-by:
-
Chris Lesiak authored
commit 342a6928 upstream. The IIO_HUMIDITYRELATIVE channel was being incorrectly reported back as percent when it should have been milli percent. This is via an incorrect scale value being returned to userspace. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Acked-by:
Matt Ranostay <matt.ranostay@konsulko.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
