1. 03 Oct, 2016 11 commits
  2. 02 Oct, 2016 8 commits
  3. 25 Sep, 2016 7 commits
    • Brian Foster's avatar
      xfs: log recovery tracepoints to track current lsn and buffer submission · 5cd9cee9
      Brian Foster authored
      Log recovery has particular rules around buffer submission along with
      tricky corner cases where independent transactions can share an LSN. As
      such, it can be difficult to follow when/why buffers are submitted
      during recovery.
      
      Add a couple tracepoints to post the current LSN of a record when a new
      record is being processed and when a buffer is being skipped due to LSN
      ordering. Also, update the recover item class to include the LSN of the
      current transaction for the item being processed.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      5cd9cee9
    • Brian Foster's avatar
      xfs: update metadata LSN in buffers during log recovery · 60a4a222
      Brian Foster authored
      Log recovery is currently broken for v5 superblocks in that it never
      updates the metadata LSN of buffers written out during recovery. The
      metadata LSN is recorded in various bits of metadata to provide recovery
      ordering criteria that prevents transient corruption states reported by
      buffer write verifiers. Without such ordering logic, buffer updates can
      be replayed out of order and lead to false positive transient corruption
      states. This is generally not a corruption vector on its own, but
      corruption detection shuts down the filesystem and ultimately prevents a
      mount if it occurs during log recovery. This requires an xfs_repair run
      that clears the log and potentially loses filesystem updates.
      
      This problem is avoided in most cases as metadata writes during normal
      filesystem operation update the metadata LSN appropriately. The problem
      with log recovery not updating metadata LSNs manifests if the system
      happens to crash shortly after log recovery itself. In this scenario, it
      is possible for log recovery to complete all metadata I/O such that the
      filesystem is consistent. If a crash occurs after that point but before
      the log tail is pushed forward by subsequent operations, however, the
      next mount performs the same log recovery over again. If a buffer is
      updated multiple times in the dirty range of the log, an earlier update
      in the log might not be valid based on the current state of the
      associated buffer after all of the updates in the log had been replayed
      (before the previous crash). If a verifier happens to detect such a
      problem, the filesystem claims corruption and immediately shuts down.
      
      This commonly manifests in practice as directory block verifier failures
      such as the following, likely due to directory verifiers being
      particularly detailed in their checks as compared to most others:
      
        ...
        Mounting V5 Filesystem
        XFS (dm-0): Starting recovery (logdev: internal)
        XFS (dm-0): Internal error XFS_WANT_CORRUPTED_RETURN at line ... of \
          file fs/xfs/libxfs/xfs_dir2_data.c.  Caller xfs_dir3_data_verify ...
        ...
      
      Update log recovery to update the metadata LSN of recovered buffers.
      Since metadata LSNs are already updated by write verifer functions via
      attached log items, attach a dummy log item to the buffer during
      validation and explicitly set the LSN of the current transaction. This
      ensures that the metadata LSN of a buffer is updated based on whether
      the recovery I/O actually completes, and if so, that subsequent recovery
      attempts identify that the buffer is already up to date with respect to
      the current transaction.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      60a4a222
    • Brian Foster's avatar
      xfs: don't warn on buffers not being recovered due to LSN · 040c52c0
      Brian Foster authored
      The log recovery buffer validation function is invoked in cases where a
      buffer update may be skipped due to LSN ordering. If the validation
      function happens to come across directory conversion situations (e.g., a
      dir3 block to data conversion), it may warn about seeing a buffer log
      format of one type and a buffer with a magic number of another.
      
      This warning is not valid as the buffer update is ultimately skipped.
      This is indicated by a current_lsn of NULLCOMMITLSN provided by the
      caller. As such, update xlog_recover_validate_buf_type() to only warn in
      such cases when a buffer update is expected.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      040c52c0
    • Brian Foster's avatar
      xfs: pass current lsn to log recovery buffer validation · 22db9af2
      Brian Foster authored
      The current LSN must be available to the buffer validation function to
      provide the ability to update the metadata LSN of the buffer. Pass the
      current_lsn value down to xlog_recover_validate_buf_type() in
      preparation.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      22db9af2
    • Brian Foster's avatar
      xfs: rework log recovery to submit buffers on LSN boundaries · 12818d24
      Brian Foster authored
      The fix to log recovery to update the metadata LSN in recovered buffers
      introduces the requirement that a buffer is submitted only once per
      current LSN. Log recovery currently submits buffers on transaction
      boundaries. This is not sufficient as the abstraction between log
      records and transactions allows for various scenarios where multiple
      transactions can share the same current LSN. If independent transactions
      share an LSN and both modify the same buffer, log recovery can
      incorrectly skip updates and leave the filesystem in an inconsisent
      state.
      
      In preparation for proper metadata LSN updates during log recovery,
      update log recovery to submit buffers for write on LSN change boundaries
      rather than transaction boundaries. Explicitly track the current LSN in
      a new struct xlog field to handle the various corner cases of when the
      current LSN may or may not change.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      12818d24
    • Dave Chinner's avatar
      xfs: quiesce the filesystem after recovery on readonly mount · ddeb14f4
      Dave Chinner authored
      Recently we've had a number of reports where log recovery on a v5
      filesystem has reported corruptions that looked to be caused by
      recovery being re-run over the top of an already-recovered
      metadata. This has uncovered a bug in recovery (fixed elsewhere)
      but the vector that caused this was largely unknown.
      
      A kdump test started tripping over this problem - the system
      would be crashed, the kdump kernel and environment would boot and
      dump the kernel core image, and then the system would reboot. After
      reboot, the root filesystem was triggering log recovery and
      corruptions were being detected. The metadumps indicated the above
      log recovery issue.
      
      What is happening is that the kdump kernel and environment is
      mounting the root device read-only to find the binaries needed to do
      it's work. The result of this is that it is running log recovery.
      However, because there were unlinked files and EFIs to be processed
      by recovery, the completion of phase 1 of log recovery could not
      mark the log clean. And because it's a read-only mount, the unmount
      process does not write records to the log to mark it clean, either.
      Hence on the next mount of the filesystem, log recovery was run
      again across all the metadata that had already been recovered and
      this is what triggered corruption warnings.
      
      To avoid this problem, we need to ensure that a read-only mount
      always updates the log when it completes the second phase of
      recovery. We already handle this sort of issue with rw->ro remount
      transitions, so the solution is as simple as quiescing the
      filesystem at the appropriate time during the mount process. This
      results in the log being marked clean so the mount behaviour
      recorded in the logs on repeated RO mounts will change (i.e. log
      recovery will no longer be run on every mount until a RW mount is
      done). This is a user visible change in behaviour, but it is
      harmless.
      Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
      Reviewed-by: default avatarEric Sandeen <sandeen@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      ddeb14f4
    • Dave Chinner's avatar
      xfs: remote attribute blocks aren't really userdata · 292378ed
      Dave Chinner authored
      When adding a new remote attribute, we write the attribute to the
      new extent before the allocation transaction is committed. This
      means we cannot reuse busy extents as that violates crash
      consistency semantics. Hence we currently treat remote attribute
      extent allocation like userdata because it has the same overwrite
      ordering constraints as userdata.
      
      Unfortunately, this also allows the allocator to incorrectly apply
      extent size hints to the remote attribute extent allocation. This
      results in interesting failures, such as transaction block
      reservation overruns and in-memory inode attribute fork corruption.
      
      To fix this, we need to separate the busy extent reuse configuration
      from the userdata configuration. This changes the definition of
      XFS_BMAPI_METADATA slightly - it now means that allocation is
      metadata and reuse of busy extents is acceptible due to the metadata
      ordering semantics of the journal. If this flag is not set, it
      means the allocation is that has unordered data writeback, and hence
      busy extent reuse is not allowed. It no longer implies the
      allocation is for user data, just that the data write will not be
      strictly ordered. This matches the semantics for both user data
      and remote attribute block allocation.
      
      As such, This patch changes the "userdata" field to a "datatype"
      field, and adds a "no busy reuse" flag to the field.
      When we detect an unordered data extent allocation, we immediately set
      the no reuse flag. We then set the "user data" flags based on the
      inode fork we are allocating the extent to. Hence we only set
      userdata flags on data fork allocations now and consider attribute
      fork remote extents to be an unordered metadata extent.
      
      The result is that remote attribute extents now have the expected
      allocation semantics, and the data fork allocation behaviour is
      completely unchanged.
      
      It should be noted that there may be other ways to fix this (e.g.
      use ordered metadata buffers for the remote attribute extent data
      write) but they are more invasive and difficult to validate both
      from a design and implementation POV. Hence this patch takes the
      simple, obvious route to fixing the problem...
      Reported-and-tested-by: default avatarRoss Zwisler <ross.zwisler@linux.intel.com>
      Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      292378ed
  4. 19 Sep, 2016 14 commits