- 13 Dec, 2011 2 commits
-
-
David S. Miller authored
After commit 8e2ec639 ("ipv6: don't use inetpeer to store metrics for routes.") the test in rt6_alloc_cow() for setting the ANYCAST flag is now wrong. 'rt' will always now have a plen of 128, because it is set explicitly to 128 by ip6_rt_copy. So to restore the semantics of the test, check the destination prefix length of 'ort'. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
gred_change_vq() is called under sch_tree_lock(sch). This means a spinlock is held, and we are not allowed to sleep in this context. We might pre-allocate memory using GFP_KERNEL before taking spinlock, but this is not suitable for stable material. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Dec, 2011 2 commits
-
-
Ted Feng authored
Same fix as 731abb9c for ipip and sit tunnel. Commit 1c5cae81 removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng <artisdom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Wei authored
There is no obvious reason to add a default multicast route for loopback devices, otherwise there would be a route entry whose dst.error set to -ENETUNREACH that would blocking all multicast packets. ==================== [ more detailed explanation ] The problem is that the resulting routing table depends on the sequence of interface's initialization and in some situation, that would block all muticast packets. Suppose there are two interfaces on my computer (lo and eth0), if we initailize 'lo' before 'eth0', the resuting routing table(for multicast) would be # ip -6 route show | grep ff00:: unreachable ff00::/8 dev lo metric 256 error -101 ff00::/8 dev eth0 metric 256 When sending multicasting packets, routing subsystem will return the first route entry which with a error set to -101(ENETUNREACH). I know the kernel will set the default ipv6 address for 'lo' when it is up and won't set the default multicast route for it, but there is no reason to stop 'init' program from setting address for 'lo', and that is exactly what systemd did. I am sure there is something wrong with kernel or systemd, currently I preferred kernel caused this problem. ==================== Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Dec, 2011 1 commit
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 08 Dec, 2011 1 commit
-
-
Hauke Mehrtens authored
This fixes a Data bus error on some SoCs. The first fix for this problem did not solve it on all devices. commit 6ae8ec27 Author: Rafał Miłecki <zajec5@gmail.com> Date: Tue Jul 5 17:25:32 2011 +0200 ssb: fix init regression of hostmode PCI core In ssb_pcicore_fix_sprom_core_index() the sprom on the PCI core is accessed, but the sprom only exists when the ssb bus is connected over a PCI bus to the rest of the system and not when the SSB Bus is the main system bus. SoCs sometimes have a PCI host controller and there this code will not be executed, but there are some old SoCs with an PCI controller in client mode around and ssb_pcicore_fix_sprom_core_index() should not be called on these devices too. The PCI controller on these devices are unused, but without this fix it results in an Data bus error when it gets initialized. Cc: Michael Buesch <m@bues.ch> Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 07 Dec, 2011 6 commits
-
-
Philipp Dreimann authored
In drivers rtl8192ce, rtl8192cu, rtl8192se, and rtl8192de, break statements would allow ppsc->rfpwr_state to be changed to ERFSLEEP even though the device is actually in ERFOFF. Signed-off-by: Philipp Dreimann <philipp@dreimann.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Emmanuel noticed that when mac80211 stops the queues for aggregation that can leave a packet pending. This packet will be given to the driver after the AMPDU callback, but as a non-aggregated packet which messes up the sequence number etc. I also noticed by looking at the code that if packets are being processed while we clear the WANT_START bit, they might see it cleared already and queue up on tid_tx->pending. If the driver then rejects the new aggregation session we leak the packet. Fix both of these issues by changing this code to not stop the queues at all. Instead, let packets queue up on the tid_tx->pending queue instead of letting them get to the driver, and add code to recover properly in case the driver rejects the session. (The patch looks large because it has to move two functions to before their new use.) Cc: stable@vger.kernel.org Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
-
Andy Fleming authored
The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Djalal Harouni authored
Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
The pdev->id is used in several places for different purpose. All these uses assume it's always the id of fec device which is >= 0. However this is only true for non-DT case. When DT plays, pdev->id is always -1, which will break these pdev->id users. Instead of fixing all these users one by one, this patch introduces a new member 'dev_id' to 'struct fec_enet_private' for holding the correct fec device id, and replaces all the existing uses of pdev->id with this dev_id. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Dec, 2011 16 commits
-
-
Felix Fietkau authored
fixes a regression on single-stream chips introduced in commit 43c35284 "ath9k: implement .get_antenna and .set_antenna" Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Silence seq_scale() unused warning ipv4:correct description for tcp_max_syn_backlog pasemi_mac: Fix building as module netback: Fix alert message. r8169: fix Rx index race between FIFO overflow recovery and NAPI handler. r8169: Rx FIFO overflow fixes. ipv4: Fix peer validation on cached lookup. ipv4: make sure RTO_ONLINK is saved in routing cache iwlwifi: change the default behavior of watchdog timer iwlwifi: do not re-configure HT40 after associated iwlagn: fix HW crypto for TX-only keys Revert "mac80211: clear sta.drv_priv on reconfiguration" mac80211: fill rate filter for internal scan requests cfg80211: amend regulatory NULL dereference fix cfg80211: fix race on init and driver registration
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ftrace: Fix hash record accounting bug perf: Fix parsing of __print_flags() in TP_printk() jump_label: jump_label_inc may return before the code is patched ftrace: Remove force undef config value left for testing tracing: Restore system filter behavior tracing: fix event_subsystem ref counting
-
Antonio Quartulli authored
When receiving a DEL change for a client due to a roaming event (change is marked with TT_CLIENT_ROAM), each node has to check if the client roamed to itself or somewhere else. In the latter case the global entry is kept to avoid having no route at all otherwise we can safely delete the global entry Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
Antonio Quartulli authored
In case of a client roaming from node A to node B, the latter have to mark the corresponding global entry with TT_CLIENT_ROAM (instead of TT_CLIENT_PENDING). Marking a global entry with TT_CLIENT_PENDING will end up in keeping such entry forever (because this flag is only meant to be used with local entries and it is never checked on global ones). In the worst case (all the clients roaming to the same node A) the local and the global table will contain exactly the same clients. Batman-adv will continue to work, but the memory usage is duplicated. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
Stephen Boyd authored
On a CONFIG_NET=y build net/core/secure_seq.c:22: warning: 'seq_scale' defined but not used Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
Since commit c5ed63d6(tcp: fix three tcp sysctls tuning), sysctl_max_syn_backlog is determined by tcp_hashinfo->ehash_mask, and the minimal value is 128, and it will increase in proportion to the memory of machine. The original description for tcp_max_syn_backlog and sysctl_max_syn_backlog are out of date. Changelog: V2: update description for sysctl_max_syn_backlog Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Shan Wei <shanwei88@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Commit ded19add ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Liu authored
The original message in netback_init was 'kthread_run() fails', which should be 'kthread_create() fails'. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intr_remapping: Fix section mismatch in ir_dev_scope_init() intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev() x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions x86, AMD: Correct align_va_addr documentation x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms x86/mrst: Battery fixes x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode x86: Fix "Acer Aspire 1" reboot hang x86/mtrr: Resolve inconsistency with Intel processor manual x86: Document rdmsr_safe restrictions x86, microcode: Fix the failure path of microcode update driver init code Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup x86/mpparse: Account for bus types other than ISA and PCI x86, mrst: Change the pmic_gpio device type to IPC mrst: Added some platform data for the SFI translations x86,mrst: Power control commands update x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot x86, UV: Fix UV2 hub part number x86: Add user_mode_vm check in stack_overflow_check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix loss of notification with multi-event perf, x86: Force IBS LVT offset assignment for family 10h perf, x86: Disable PEBS on SandyBridge chips trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter perf session: Fix crash with invalid CPU list perf python: Fix undefined symbol problem perf/x86: Enable raw event access to Intel offcore events perf: Don't use -ENOSPC for out of PMU resources perf: Do not set task_ctx pointer in cpuctx if there are no events in the context perf/x86: Fix PEBS instruction unwind oprofile, x86: Fix crash when unloading module (nmi timer mode) oprofile: Fix crash when unloading module (hr timer mode)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents: Set noop handler in clockevents_exchange_device() tick-broadcast: Stop active broadcast device when replacing it clocksource: Fix bug with max_deferment margin calculation rtc: Fix some bugs that allowed accumulating time drift in suspend/resume rtc: Disable the alarm in the hardware
-
Linus Torvalds authored
Merge branches 'core-urgent-for-linus' and 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: slab, lockdep: Fix silly bug * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix race condition when stopping the irq thread
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched, x86: Avoid unnecessary overflow in sched_clock sched: Fix buglet in return_cfs_rq_runtime() sched: Avoid SMT siblings in select_idle_sibling() if possible sched: Set the command name of the idle tasks in SMP kernels sched, rt: Provide means of disabling cross-cpu bandwidth sharing sched: Document wait_for_completion_*() return values sched_fair: Fix a typo in the comment describing update_sd_lb_stats sched: Add a comment to effective_load() since it's a pain
-
- 05 Dec, 2011 12 commits
-
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] ap: Setup timer for sending messages after reset. [S390] cio: fix chsc_chp_vary [S390] cio: provide fake irb for transport mode IO [S390] cio: disallow driver io for known to be broken paths [S390] hibernate: directly trigger subchannel evaluation [S390] remove reset of system call restart on psw changes [S390] add missing .set function for NT_S390_LAST_BREAK regset [S390] fix page change underindication in pgste_update_all [S390] ptrace inferior call interactions with TIF_SYSCALL [S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check
-
françois romieu authored
Since 92fc43b4, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12 ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Walleij authored
I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely <grant.likely@secretlab.ca> Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt authored
If the set_ftrace_filter is cleared by writing just whitespace to it, then the filter hash refcounts will be decremented but not updated. This causes two bugs: 1) No functions will be enabled for tracing when they all should be 2) If the users clears the set_ftrace_filter twice, it will crash ftrace: ------------[ cut here ]------------ WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7() Modules linked in: Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32 Call Trace: [<ffffffff81051828>] warn_slowpath_common+0x83/0x9b [<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c [<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7 [<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f [<ffffffff8111bdfe>] ? kfree+0xe5/0x115 [<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151 [<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f [<ffffffff8112e49a>] fput+0xfd/0x1c2 [<ffffffff8112b54c>] filp_close+0x6d/0x78 [<ffffffff8113a92d>] sys_dup3+0x197/0x1c1 [<ffffffff8113a9a6>] sys_dup2+0x4f/0x54 [<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b ---[ end trace 77a3a7ee73794a02 ]--- Link: http://lkml.kernel.org/r/20111101141420.GA4918@debianReported-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
A update is made to the sched:sched_switch event that adds some logic to the first parameter of the __print_flags() that shows the state of tasks. This change cause perf to fail parsing the flags. A simple fix is needed to have the parser be able to process ops within the argument. Cc: stable@vger.kernel.org Reported-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Gleb Natapov authored
If cpu A calls jump_label_inc() just after atomic_add_return() is called by cpu B, atomic_inc_not_zero() will return value greater then zero and jump_label_inc() will return to a caller before jump_label_update() finishes its job on cpu B. Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com Cc: stable@vger.kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
A forced undef of a config value was used for testing and was accidently left in during the final commit. This causes x86 to run slower than needed while running function tracing as well as causes the function graph selftest to fail when DYNMAIC_FTRACE is not set. This is because the code in MCOUNT expects the ftrace code to be processed with the config value set that happened to be forced not set. The forced config option was left in by: commit 6331c28c ftrace: Fix dynamic selftest failure on some archs Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian Cc: stable@vger.kernel.org Reported-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Li Zefan authored
Though not all events have field 'prev_pid', it was allowed to do this: # echo 'prev_pid == 100' > events/sched/filter but commit 75b8e982 (tracing/filter: Swap entire filter of events) broke it without any reason. Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.comSigned-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Ilya Dryomov authored
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from ever being released. Ref_count was added to keep track of subsystem users, not for counting events. Subsystem is created with ref_count = 1, so there is no need to increment it for every event, we have nr_events for that. Fix this by touching ref_count only when we actually have a new user - subsystem_open(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.comSigned-off-by: Steven Rostedt <rostedt@goodmis.org>
-
David S. Miller authored
If ipv4_valdiate_peer() fails during a cached entry lookup, we'll NULL derer since the loop iterator assumes rth is not NULL. Letting this be handled as a failure is just bogus, so just make it not fail. If we have trouble getting a non-NULL neighbour for the redirected gateway, just restore the original gateway and continue. The very next use of this cached route will try again. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-