- 15 Mar, 2017 15 commits
-
-
Erez Shitrit authored
commit 2b084176 upstream. When sending packet to destination that was not resolved yet via path query, the driver keeps the skb and tries to re-send it again when the path is resolved. But when re-sending via dev_queue_xmit the kernel doesn't call to dev_hard_header, so IPoIB needs to keep 20 bytes in the skb and to put the destination address inside them. In that way the dev_start_xmit will have the correct destination, and the driver won't take the destination from the skb->data, while nothing exists there, which causes to packet be be dropped. The test flow is: 1. Run the SM on remote node, 2. Restart the driver. 4. Ping some destination, 3. Observe that first ICMP request will be dropped. Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Tested-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Feras Daoud authored
commit 0a0007f2 upstream. When calling set_mode from sys/fs, the call flow locks the sys/fs lock first and then tries to lock rtnl_lock (when calling ipoib_set_mod). On the other hand, the rmmod call flow takes the rtnl_lock first (when calling unregister_netdev) and then tries to take the sys/fs lock. Deadlock a->b, b->a. The problem starts when ipoib_set_mod frees it's rtnl_lck and tries to get it after that. set_mod: [<ffffffff8104f2bd>] ? check_preempt_curr+0x6d/0x90 [<ffffffff814fee8e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff81448655>] ? __rtnl_unlock+0x15/0x20 [<ffffffff814fed2b>] mutex_lock+0x2b/0x50 [<ffffffff81448675>] rtnl_lock+0x15/0x20 [<ffffffffa02ad807>] ipoib_set_mode+0x97/0x160 [ib_ipoib] [<ffffffffa02b5f5b>] set_mode+0x3b/0x80 [ib_ipoib] [<ffffffff8134b840>] dev_attr_store+0x20/0x30 [<ffffffff811f0fe5>] sysfs_write_file+0xe5/0x170 [<ffffffff8117b068>] vfs_write+0xb8/0x1a0 [<ffffffff8117ba81>] sys_write+0x51/0x90 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b rmmod: [<ffffffff81279ffc>] ? put_dec+0x10c/0x110 [<ffffffff8127a2ee>] ? number+0x2ee/0x320 [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 [<ffffffff8127cc04>] ? vsnprintf+0x484/0x5f0 [<ffffffff8127b550>] ? string+0x40/0x100 [<ffffffff814fe323>] wait_for_common+0x123/0x180 [<ffffffff81060250>] ? default_wake_function+0x0/0x20 [<ffffffff8119661e>] ? ifind_fast+0x5e/0xb0 [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 [<ffffffff811f2e68>] sysfs_addrm_finish+0x228/0x270 [<ffffffff811f2fb3>] sysfs_remove_dir+0xa3/0xf0 [<ffffffff81273f66>] kobject_del+0x16/0x40 [<ffffffff8134cd14>] device_del+0x184/0x1e0 [<ffffffff8144e59b>] netdev_unregister_kobject+0xab/0xc0 [<ffffffff8143c05e>] rollback_registered+0xae/0x130 [<ffffffff8143c102>] unregister_netdevice+0x22/0x70 [<ffffffff8143c16e>] unregister_netdev+0x1e/0x30 [<ffffffffa02a91b0>] ipoib_remove_one+0xe0/0x120 [ib_ipoib] [<ffffffffa01ed95f>] ib_unregister_device+0x4f/0x100 [ib_core] [<ffffffffa021f5e1>] mlx4_ib_remove+0x41/0x180 [mlx4_ib] [<ffffffffa01ab771>] mlx4_remove_device+0x71/0x90 [mlx4_core] Fixes: 862096a8 ("IB/ipoib: Add more rtnl_link_ops callbacks") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Eric W. Biederman authored
commit 1064f874 upstream. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Fixes: b90fa9ae ("[PATCH] shared mount handling: bind and rbind") Tested-by:
Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 239a3b66 upstream. When TX descriptors are filled in, the buffer DMA address is split between the tx_desc->buf_phys_addr field (high-order bits) and tx_desc->packet_offset field (5 low-order bits). However, when we re-calculate the DMA address from the TX descriptor in mvpp2_txq_inc_put(), we do not take tx_desc->packet_offset into account. This means that when the DMA address is not aligned on a 32 bytes boundary, we end up calling dma_unmap_single() with a DMA address that was not the one returned by dma_map_single(). This inconsistency is detected by the kernel when DMA_API_DEBUG is enabled. We fix this problem by properly calculating the DMA address in mvpp2_txq_inc_put(). Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Heiko Carstens authored
commit 4920e3cf upstream. The current implementation of setup_randomness uses the stack address and therefore the pointer to the SYSIB 3.2.2 block as input data address. Furthermore the length of the input data is the number of virtual-machine description blocks which is typically one. This means that typically a single zero byte is fed to add_device_randomness. Fix both of these and use the address of the first virtual machine description block as input data address and also use the correct length. Fixes: bcfcbb6b ("s390: add system information as device randomness") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit da8fd820 upstream. Commit bcfcbb6b ("s390: add system information as device randomness") intended to add some virtual machine specific information to the randomness pool. Unfortunately it uses the page allocator before it is ready to use. In result the page allocator always returns NULL and the setup_randomness function never adds anything to the randomness pool. To fix this use memblock_alloc and memblock_free instead. Fixes: bcfcbb6b ("s390: add system information as device randomness") Signed-off-by:
-
Martin Schwidefsky authored
commit fb94a687 upstream. Return a sensible value if TASK_SIZE if called from a kernel thread. This gets us around an issue with copy_mount_options that does a magic size calculation "TASK_SIZE - (unsigned long)data" while in a kernel thread and data pointing to kernel space. Signed-off-by:
-
Gerald Schaefer authored
commit a63f53e3 upstream. Since commit dd22f551 "block: Change direct_access calling convention", the device size calculation in dcssblk_direct_access() is off-by-one. This results in bdev_direct_access() always returning -ENXIO because the returned value is not page aligned. Fix this by adding 1 to the dev_sz calculation. Fixes: dd22f551 ("block: Change direct_access calling convention") Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit 1e4a382f upstream. For devices with multiple input queues, tiqdio_call_inq_handlers() iterates over all input queues and clears the device's DSCI during each iteration. If the DSCI is re-armed during one of the later iterations, we therefore do not scan the previous queues again. The re-arming also raises a new adapter interrupt. But its handler does not trigger a rescan for the device, as the DSCI has already been erroneously cleared. This can result in queue stalls on devices with multiple input queues. Fix it by clearing the DSCI just once, prior to scanning the queues. As the code is moved in front of the loop, we also need to access the DSCI directly (ie irq->dsci) instead of going via each queue's parent pointer to the same irq. This is not a functional change, and a follow-up patch will clean up the other users. In practice, this bug only affects CQ-enabled HiperSockets devices, ie. devices with sysfs-attribute "hsuid" set. Setting a hsuid is needed for AF_IUCV socket applications that use HiperSockets communication. Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks") Reviewed-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Dmitry Tunin authored
commit 441ad62d upstream. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3018 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Chao Peng authored
commit 96794e4e upstream. Guest segment selector is 16 bit field and guest segment base is natural width field. Fix two incorrect invocations accordingly. Without this patch, build fails when aggressive inlining is used with ICC. Signed-off-by:
Chao Peng <chao.p.peng@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Janosch Frank authored
commit e1e8a962 upstream. User controlled KVM guests do not support the dirty log, as they have no single gmap that we can check for changes. As they have no single gmap, kvm->arch.gmap is NULL and all further referencing to it for dirty checking will result in a NULL dereference. Let's return -EINVAL if a caller tries to sync dirty logs for a UCONTROL guest. Fixes: 15f36ebd ("KVM: s390: Add proper dirty bitmap support to S390 kvm.") Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Reported-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Ian Abbott authored
commit 1c9c858e upstream. The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Alexander Popov authored
commit 82f2341c upstream. Currently N_HDLC line discipline uses a self-made singly linked list for data buffers and has n_hdlc.tbuf pointer for buffer retransmitting after an error. The commit be10eb75 ("tty: n_hdlc add buffer flushing") introduced racy access to n_hdlc.tbuf. After tx error concurrent flush_tx_queue() and n_hdlc_send_frames() can put one data buffer to tx_free_buf_list twice. That causes double free in n_hdlc_release(). Let's use standard kernel linked list and get rid of n_hdlc.tbuf: in case of tx error put current data buffer after the head of tx_buf_list. Signed-off-by:
Alexander Popov <alex.popov@linux.com> Signed-off-by:
-
Jiri Slaby authored
commit e9b736d8 upstream. The class of 4 n_hdls buf locks is the same because a single function n_hdlc_buf_list_init is used to init all the locks. But since flush_tx_queue takes n_hdlc->tx_buf_list.spinlock and then calls n_hdlc_buf_put which takes n_hdlc->tx_free_buf_list.spinlock, lockdep emits a warning: ============================================= [ INFO: possible recursive locking detected ] 4.3.0-25.g91e30a7-default #1 Not tainted --------------------------------------------- a.out/1248 is trying to acquire lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] but task is already holding lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->spinlock)->rlock); lock(&(&list->spinlock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by a.out/1248: #0: (&tty->ldisc_sem){++++++}, at: [<ffffffff814c9eb0>] tty_ldisc_ref_wait+0x20/0x50 #1: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] ... Call Trace: ... [<ffffffff81738fd0>] _raw_spin_lock_irqsave+0x50/0x70 [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] [<ffffffffa01fdc24>] n_hdlc_tty_ioctl+0x144/0x1d0 [n_hdlc] [<ffffffff814c25c1>] tty_ioctl+0x3f1/0xe40 ... Fix it by initializing the spin_locks separately. This removes also reduntand memset of a freshly kzallocated space. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
- 12 Mar, 2017 25 commits
-
-
Greg Kroah-Hartman authored
-
James Smart authored
commit 8ea73db4 upstream. Correct WQ creation for pagesize The driver was calculating the adapter command pagesize indicator from the system pagesize. However, the buffers the driver allocates are only one size (SLI4_PAGE_SIZE), so no calculation was necessary. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
-
Ralf Baechle authored
commit ae2f5e5e upstream. Fix the following build error with binutils 2.25. CC arch/mips/mm/sc-ip22.o {standard input}: Assembler messages: {standard input}:132: Error: number (0x9000000080000000) larger than 32 bits {standard input}:159: Error: number (0x9000000080000000) larger than 32 bits {standard input}:200: Error: number (0x9000000080000000) larger than 32 bits scripts/Makefile.build:293: recipe for target 'arch/mips/mm/sc-ip22.o' failed make[1]: *** [arch/mips/mm/sc-ip22.o] Error 1 MIPS has used .set mips3 to temporarily switch the assembler to 64 bit mode in 64 bit kernels virtually forever. Binutils 2.25 broke this behavious partially by happily accepting 64 bit instructions in .set mips3 mode but puking on 64 bit constants when generating 32 bit ELF. Binutils 2.26 restored the old behaviour again. Fix build with binutils 2.25 by open coding the offending dli $1, 0x9000000080000000 as li $1, 0x9000 dsll $1, $1, 48 which is ugly be the only thing that will build on all binutils vintages. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Ralf Baechle authored
commit f9f1c8db upstream. Signed-off-by:
-
Ravi Bangoria authored
commit c21a493a upstream. Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Magnus Lilja authored
commit adee40b2 upstream. Commit 3d8cc000 ("dmaengine: ipu: Consolidate duplicated irq handlers") consolidated the two interrupts routines into one, but the remaining interrupt routine only checks the status of the error interrupts, not the normal interrupts. This patch fixes that problem (tested on i.MX31 PDK board). Fixes: 3d8cc000 ("dmaengine: ipu: Consolidate duplicated irq handlers") Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Rafał Miłecki authored
commit a971df0b upstream. This allows tracking device state and e.g. makes devm work as expected. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
colyli@suse.de authored
commit 03a9e24e upstream. Recently I receive a bug report that on Linux v3.0 based kerenl, hot add disk to a md linear device causes kernel crash at linear_congested(). From the crash image analysis, I find in linear_congested(), mddev->raid_disks contains value N, but conf->disks[] only has N-1 pointers available. Then a NULL pointer deference crashes the kernel. There is a race between linear_add() and linear_congested(), RCU stuffs used in these two functions cannot avoid the race. Since Linuv v4.0 RCU code is replaced by introducing mddev_suspend(). After checking the upstream code, it seems linear_congested() is not called in generic_make_request() code patch, so mddev_suspend() cannot provent it from being called. The possible race still exists. Here I explain how the race still exists in current code. For a machine has many CPUs, on one CPU, linear_add() is called to add a hard disk to a md linear device; at the same time on other CPU, linear_congested() is called to detect whether this md linear device is congested before issuing an I/O request onto it. Now I use a possible code execution time sequence to demo how the possible race happens, seq linear_add() linear_congested() 0 conf=mddev->private 1 oldconf=mddev->private 2 mddev->raid_disks++ 3 for (i=0; i<mddev->raid_disks;i++) 4 bdev_get_queue(conf->disks[i].rdev->bdev) 5 mddev->private=newconf In linear_add() mddev->raid_disks is increased in time seq 2, and on another CPU in linear_congested() the for-loop iterates conf->disks[i] by the increased mddev->raid_disks in time seq 3,4. But conf with one more element (which is a pointer to struct dev_info type) to conf->disks[] is not updated yet, accessing its structure member in time seq 4 will cause a NULL pointer deference fault. To fix this race, there are 2 parts of modification in the patch, 1) Add 'int raid_disks' in struct linear_conf, as a copy of mddev->raid_disks. It is initialized in linear_conf(), always being consistent with pointers number of 'struct dev_info disks[]'. When iterating conf->disks[] in linear_congested(), use conf->raid_disks to replace mddev->raid_disks in the for-loop, then NULL pointer deference will not happen again. 2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to free oldconf memory. Because oldconf may be referenced as mddev->private in linear_congested(), kfree_rcu() makes sure that its memory will not be released until no one uses it any more. Also some code comments are added in this patch, to make this modification to be easier understandable. This patch can be applied for kernels since v4.0 after commit: 3be260cc ("md/linear: remove rcu protections in favour of suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for people who maintain kernels before Linux v4.0, they need to do some back back port to this patch. Changelog: - V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to replace rcu_call() in linear_add(). - v2: add RCU stuffs by suggestion from Shaohua and Neil. - v1: initial effort. Signed-off-by:
Coly Li <colyli@suse.de> Cc: Shaohua Li <shli@fb.com> Cc: Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Maxime Ripard authored
commit fb61bb82 upstream. The RTC is clocked from either an internal, imprecise, oscillator or an external one, which is usually much more accurate. The difference perceived between the time elapsed and the time reported by the RTC is in a 10% scale, which prevents the RTC from being useful at all. Fortunately, the external oscillator is reported to be mandatory in the Allwinner datasheet, so we can just switch to it. Fixes: 9765d2d9 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Maxime Ripard authored
commit a9422a19 upstream. Some registers have a read-modify-write access pattern that are not atomic. Add some locking to prevent from concurrent accesses. Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Weston Andros Adamson authored
commit ed92d8c1 upstream. We're not taking into account that the space needed for the (variable length) attr bitmap, with the result that we'd sometimes get a spurious ERANGE when the ACL data got close to the end of a page. Just add in an extra page to make sure. Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
J. Bruce Fields authored
commit 6682c14b upstream. Bitmap and attrlen follow immediately after the op reply header. This was an oversight from commit bf118a34. Consequences of this are just minor efficiency (extra calls to xdr_shrink_bufhead). Fixes: bf118a34 "NFSv4: include bitmap in nfsv4 get acl data" Reviewed-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit a974deee upstream. If we exit because the file access check failed, we currently leak the struct nfs4_state. We need to attach it to the open context before returning. Fixes: 3efb9722 ("NFSv4: Refactor _nfs4_open_and_get_state..") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Christoph Hellwig authored
commit 783112f7 upstream. Both the NFS protocols and the Linux VFS use a setattr operation with a bitmap of attributes to set to set various file attributes including the file size and the uid/gid. The Linux syscalls never mix size updates with unrelated updates like the uid/gid, and some file systems like XFS and GFS2 rely on the fact that truncates don't update random other attributes, and many other file systems handle the case but do not update the other attributes in the same transaction. NFSD on the other hand passes the attributes it gets on the wire more or less directly through to the VFS, leading to updates the file systems don't expect. XFS at least has an assert on the allowed attributes, which caught an unusual NFS client setting the size and group at the same time. To handle this issue properly this splits the notify_change call in nfsd_setattr into two separate ones. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Christoph Hellwig authored
commit 758e99fe upstream. Simplify exit paths, size_change use. Signed-off-by:
-
Larry Finger authored
commit 6773386f upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Ping-Ke Shih authored
commit 40b368af upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Andrew Price authored
commit f38e5fb9 upstream. We must hold the rcu read lock across looking up glocks and trying to bump their refcount to prevent the glocks from being freed in between. Signed-off-by:
Andrew Price <anprice@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Steve Wise authored
commit f2625f7d upstream. cma_accept_iw() needs to return an error if conn_params is NULL. Since this is coming from user space, we can crash. Reported-by:
Shaobo He <shaobo@cs.utah.edu> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 55efcfcd upstream. The RDMA core uses ib_pack() to convert from unpacked CPU structs to on-the-wire bitpacked structs. This process requires that 1 bit fields are declared as u8 in the unpacked struct, otherwise the packing process does not read the value properly and the packed result is wired to 0. Several places wrongly used int. Crucially this means the kernel has never, set reversible correctly in the path record request. It has always asked for irreversible paths even if the ULP requests otherwise. When the kernel is used with a SM that supports this feature, it completely breaks communication management if reversible paths are not properly requested. The only reason this ever worked is because opensm ignores the reversible bit. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit d77044d1 upstream. VSS may use a char device to support the communication between the user level daemon and the driver. When the VSS channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new VSS offer from the host. Implement this logic. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 20951c75 upstream. Fcopy may use a char device to support the communication between the user level daemon and the driver. When the Fcopy channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new Fcopy offer from the host. Implement this logic. Signed-off-by:
-
K. Y. Srinivasan authored
commit 5a66fecb upstream. KVP may use a char device to support the communication between the user level daemon and the driver. When the KVP channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new KVP offer from the host. Implement this logic. Signed-off-by:
-
Vitaly Kuznetsov authored
commit 3c7630d3 upstream. Initializing hv_context.percpu_list in hv_synic_alloc() helps to prevent a crash in percpu_channel_enq() when not all CPUs were online during initialization and it naturally belongs there. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 421b8f20 upstream. It may happen that not all CPUs are online when we do hv_synic_alloc() and in case more CPUs come online later we may try accessing these allocated structures. Signed-off-by:
-
