Merge tag 'pwm/for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
 "These changes fix a bit of fallout from the introduction of the atomic
  API"

* tag 'pwm/for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: atmel-hlcdc: Fix default PWM polarity
  pwm: sysfs: Get return value from pwm_apply_state()
  pwm: Improve args checking in pwm_apply_state()

Pull KVM fixes from Paolo Bonzini:

 - miscellaneous fixes for MIPS and s390

 - one new kvm_stat for s390

 - correctly disable VT-d posted interrupts with the rest of posted
   interrupts

 - "make randconfig" fix for x86 AMD

 - off-by-one in irq route check (the "good" kind that errors out a bit
   too early!)

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: vmx: check apicv is active before using VT-d posted interrupt
  kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES
  kvm: svm: Do not support AVIC if not CONFIG_X86_LOCAL_APIC
  kvm: svm: Fix implicit declaration for __default_cpu_present_to_apicid()
  MIPS: KVM: Fix CACHE triggered exception emulation
  MIPS: KVM: Don't unwind PC when emulating CACHE
  MIPS: KVM: Include bit 31 in segment matches
  MIPS: KVM: Fix modular KVM under QEMU
  KVM: s390: Add stats for PEI events
  KVM: s390: ignore IBC if zero

Pull nfsd bugfixes from Bruce Fields:
 "Oleg Drokin found and fixed races in the nfsd4 state code that go back
  to the big nfs4_lock_state removal around 3.17 (but that were also
  probably hard to reproduce before client changes in 3.20 allowed the
  client to perform parallel opens).

  Also fix a 4.1 backchannel crash due to rpc multipath changes in 4.6.
  Trond acked the client-side rpc fixes going through my tree"

* tag 'nfsd-4.7-1' of git://linux-nfs.org/~bfields/linux:
  nfsd: Make init_open_stateid() a bit more whole
  nfsd: Extend the mutex holding region around in nfsd4_process_open2()
  nfsd: Always lock state exclusively.
  rpc: share one xps between all backchannels
  nfsd4/rpc: move backchannel create logic into rpc code
  SUNRPC: fix xprt leak on xps allocation failure
  nfsd: Fix NFSD_MDS_PR_KEY on 32-bit by adding ULL postfix

Pull overlayfs fixes from Miklos Szeredi:
 "This contains two regression fixes: one for the xattr API update and
  one for using the mounter's creds in file creation in overlayfs.

  There's also a fix for a bug in handling hard linked AF_UNIX sockets
  that's been there from day one.  This fix is overlayfs only despite
  the fact that it touches code outside the overlay filesystem: d_real()
  is an identity function for all except overlay dentries"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix uid/gid when creating over whiteout
  ovl: xattr filter fix
  af_unix: fix hard linked sockets on overlay
  vfs: add d_real_inode() helper

If __key_link_begin() failed then "edit" would be uninitialized.  I've
added a check to fix that.

This allows a random user to crash the kernel, though it's quite
difficult to achieve.  There are three ways it can be done as the user
would have to cause an error to occur in __key_link():

 (1) Cause the kernel to run out of memory.  In practice, this is difficult
     to achieve without ENOMEM cropping up elsewhere and aborting the
     attempt.

 (2) Revoke the destination keyring between the keyring ID being looked up
     and it being tested for revocation.  In practice, this is difficult to
     time correctly because the KEYCTL_REJECT function can only be used
     from the request-key upcall process.  Further, users can only make use
     of what's in /sbin/request-key.conf, though this does including a
     rejection debugging test - which means that the destination keyring
     has to be the caller's session keyring in practice.

 (3) Have just enough key quota available to create a key, a new session
     keyring for the upcall and a link in the session keyring, but not then
     sufficient quota to create a link in the nominated destination keyring
     so that it fails with EDQUOT.

The bug can be triggered using option (3) above using something like the
following:

	echo 80 >/proc/sys/kernel/keys/root_maxbytes
	keyctl request2 user debug:fred negate @t

The above sets the quota to something much lower (80) to make the bug
easier to trigger, but this is dependent on the system.  Note also that
the name of the keyring created contains a random number that may be
between 1 and 10 characters in size, so may throw the test off by
changing the amount of quota used.

Assuming the failure occurs, something like the following will be seen:

	kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h
	------------[ cut here ]------------
	kernel BUG at ../mm/slab.c:2821!
	...
	RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25
	RSP: 0018:ffff8804014a7de8  EFLAGS: 00010092
	RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000
	RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300
	RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000
	R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202
	R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001
	...
	Call Trace:
	  kfree+0xde/0x1bc
	  assoc_array_cancel_edit+0x1f/0x36
	  __key_link_end+0x55/0x63
	  key_reject_and_link+0x124/0x155
	  keyctl_reject_key+0xb6/0xe0
	  keyctl_negate_key+0x10/0x12
	  SyS_keyctl+0x9f/0xe7
	  do_syscall_64+0x63/0x13a
	  entry_SYSCALL64_slow_path+0x25/0x25

Fixes: f70e2e06 ('KEYS: Do preallocation for __key_link()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

VT-d posted interrupt is relying on the CPU side's posted interrupt.
Need to check whether VCPU's APICv is active before enabing VT-d
posted interrupt.

Fixes: d62caabb
Cc: stable@vger.kernel.org
Signed-off-by: Yang Zhang <yang.zhang.wz@gmail.com>
Signed-off-by: Shengge Ding <shengge.dsg@alibaba-inc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

These days, we experienced one guest crash with 8 cores and 3 disks,
with qemu error logs as bellow:

qemu-system-x86_64: /build/qemu-2.0.0/kvm-all.c:984:
kvm_irqchip_commit_routes: Assertion `ret == 0' failed.

And then we found one patch(bdf026317d) in qemu tree, which said
could fix this bug.

Execute the following script will reproduce the BUG quickly:

irq_affinity.sh
========================================================================

vda_irq_num=25
vdb_irq_num=27
while [ 1 ]
do
    for irq in {1,2,4,8,10,20,40,80}
        do
            echo $irq > /proc/irq/$vda_irq_num/smp_affinity
            echo $irq > /proc/irq/$vdb_irq_num/smp_affinity
            dd if=/dev/vda of=/dev/zero bs=4K count=100 iflag=direct
            dd if=/dev/vdb of=/dev/zero bs=4K count=100 iflag=direct
        done
done
========================================================================

The following qemu log is added in the qemu code and is displayed when
this bug reproduced:

kvm_irqchip_commit_routes: max gsi: 1008, nr_allocated_irq_routes: 1024,
irq_routes->nr: 1024, gsi_count: 1024.

That's to say when irq_routes->nr == 1024, there are 1024 routing entries,
but in the kernel code when routes->nr >= 1024, will just return -EINVAL;

The nr is the number of the routing entries which is in of
[1 ~ KVM_MAX_IRQ_ROUTES], not the index in [0 ~ KVM_MAX_IRQ_ROUTES - 1].

This patch fix the BUG above.

Cc: stable@vger.kernel.org
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull drm fixes from Dave Airlie:
 "The main drm fixes pull for rc4: one regression fix in the connector
  refcounting, and an MST fix.

  There rest is nouveau, amdkfd, i915, etnaviv, and radeon/amdgpu fixes,
  mostly regression or black screen fixes"

* tag 'drm-fixes-for-v4.7-rc4' of git://people.freedesktop.org/~airlied/linux: (23 commits)
  drm/etnaviv: initialize iommu domain page size
  drm/nouveau/iccsense: fix memory leak
  drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
  drm/amd/powerplay: select samu dpm 0 as boot level on polaris.
  drm/amd/powerplay: update powerplay table parsing
  drm/dp/mst: Always clear proposed vcpi table for port.
  drm/crtc: only store the necessary data for set_config rollback
  drm/crtc: fix connector reference counting mismatch in drm_crtc_helper_set_config
  drm/i915/ilk: Don't disable SSC source if it's in use
  Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"
  drm/amdgpu/gfx7: fix broken condition check
  drm/radeon: fix asic initialization for virtualized environments
  amdgpu: fix asic initialization for virtualized environments (v2)
  drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
  drm/radeon: do not hard reset GPU while freezing on r600/r700 family
  drm/i915: Extract physical display dimensions from VBT
  drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
  drm/i915: Only ignore eDP ports that are connected
  drm/i915: Silence "unexpected child device config size" for VBT on 845g
  drm/i915: Fix NULL pointer deference when out of PLLs in IVB
  ...

Merge tag 'platform-drivers-x86-v4.7-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Minor kconfig dependency cleanup, trivial mic mute hotkey for ideapad,
  and a needed improvement in adaptive keyboard detection for thinkpad:

  platform/x86:
   - Drop duplicate dependencies on X86

  thinkpad_acpi:
   - Add support for HKEY version 0x200

  ideapad_laptop:
   - Add an event for mic mute hotkey"

* tag 'platform-drivers-x86-v4.7-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: Drop duplicate dependencies on X86
  thinkpad_acpi: Add support for HKEY version 0x200
  ideapad_laptop: Add an event for mic mute hotkey

Pull UBI fixes from Richard Weinberger:
 "This contains fixes for a regression introduced in rc1"

* tag 'upstream-4.7-rc4' of git://git.infradead.org/linux-ubifs:
  ubi: Don't bypass ->getattr()
  Revert "mtd: switch open_mtd_by_chdev() to use of vfs_stat()"
  Revert "mtd: switch ubi_open_volume_path() to vfs_stat()"

Pull ipmi bugfix from Corey Minyard:
 "Fix a fairly significant ipmi list bug

  This bug could cause lists to be corrupted"

* tag 'for-linus-4.7-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()

Move the state selection logic inside from the caller,
always making it return correct stp to use.
Signed-off-by: J . Bruce Fields <bfields@fieldses.org>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

To avoid racing entry into nfs4_get_vfs_file().
Make init_open_stateid() return with locked stateid to be unlocked
by the caller.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

It used to be the case that state had an rwlock that was locked for write
by downgrades, but for read for upgrades (opens). Well, the problem is
if there are two competing opens for the same state, they step on
each other toes potentially leading to leaking file descriptors
from the state structure, since access mode is a bitmap only set once.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull virtio docs and tests from Michael Tsirkin:
 "This merely has some documentation and a new test, seems safe to
  merge"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: add noring tool
  tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu
  tools/virtio/ringtest: add usage example to README
  MAINTAINERS: Add file patterns for virtio device tree bindings

Updating email addresses in MAINTAINERS and .mailmap files.

Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For the third time in three years, I'm changing my e-mail at Samsung.
That's bad, as it may stop communications with me for a while.  So, this
time, I'll also add the mchehab@kernel.org e-mail, as it remains stable
since ever.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radeon and amdgpu fixes for 4.7.  Highlights:
- fixes for GPU VM passthrough
- fixes for powerplay on Polaris GPUs
- pll fixes for rs780/880

* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/powerplay: select samu dpm 0 as boot level on polaris.
  drm/amd/powerplay: update powerplay table parsing
  Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"
  drm/amdgpu/gfx7: fix broken condition check
  drm/radeon: fix asic initialization for virtualized environments
  amdgpu: fix asic initialization for virtualized environments (v2)
  drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
  drm/radeon: do not hard reset GPU while freezing on r600/r700 family

Add logic to disable AVIC #ifndef CONFIG_X86_LOCAL_APIC.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The commit 8221c137 ("svm: Manage vcpu load/unload when enable AVIC")
introduces a build error due to implicit function declaration
when #ifdef CONFIG_X86_32 and #ifndef CONFIG_X86_LOCAL_APIC
(as reported by Kbuild test robot i386-randconfig-x0-06121009).

So, this patch introduces kvm_cpu_get_apicid() wrapper
around __default_cpu_present_to_apicid() with additional
handling if CONFIG_X86_LOCAL_APIC is not defined.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: commit 8221c137 ("svm: Manage vcpu load/unload when enable AVIC")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

just a single fix for a regression introduced by IOMMU API changes in
v4.7.

* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: initialize iommu domain page size

The spec allows backchannels for multiple clients to share the same tcp
connection.  When that happens, we need to use the same xprt for all of
them.  Similarly, we need the same xps.

This fixes list corruption introduced by the multipath code.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>

Also simplify the logic a bit.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>

Callers of rpc_create_xprt expect it to put the xprt on success and
failure.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>

Fix a regression when creating a file over a whiteout.  The new
file/directory needs to use the current fsuid/fsgid, not the ones from the
mounter's credentials.

The refcounting is a bit tricky: prepare_creds() sets an original refcount,
override_creds() gets one more, which revert_cred() drops.  So

  1) we need to expicitly put the mounter's credentials when overriding
     with the updated one

  2) we need to put the original ref to the updated creds (and this can
     safely be done before revert_creds(), since we'll still have the ref
     from override_creds()).
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Fixes: 3fe6e52f ("ovl: override creds with the ones from the superblock mounter")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Since d16e0faa (iommu: Allow selecting page sizes per domain) the
iommu core demands the page size to be set per domain, otherwise any
mapping attempts will be dropped. Make sure to set a valid page size
for the etnaviv iommu.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

* 'linux-4.7' of git://github.com/skeggsb/linux:
  drm/nouveau/iccsense: fix memory leak
  drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This reverts commit 1733a2ad.

There is apparently something amiss with the way the TTM code handles
DMA buffers, which the above commit was attempting to work around for
arm64 systems with non-coherent PCI. Unfortunately, this completely
breaks systems *with* coherent PCI (which appear to be the majority).

Booting a plain arm64 defconfig + CONFIG_DRM + CONFIG_DRM_NOUVEAU on
a machine with a PCI GPU having coherent dma_map_ops (in this case a
7600GT card plugged into an ARM Juno board) results in a fatal crash:

[    2.803438] nouveau 0000:06:00.0: DRM: allocated 1024x768 fb: 0x9000, bo ffffffc976141c00
[    2.897662] Unable to handle kernel NULL pointer dereference at virtual address 000001ac
[    2.897666] pgd = ffffff8008e00000
[    2.897675] [000001ac] *pgd=00000009ffffe003, *pud=00000009ffffe003, *pmd=0000000000000000
[    2.897680] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[    2.897685] Modules linked in:
[    2.897692] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc5+ #543
[    2.897694] Hardware name: ARM Juno development board (r1) (DT)
[    2.897699] task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000
[    2.897711] PC is at __memcpy+0x7c/0x180
[    2.897719] LR is at OUT_RINGp+0x34/0x70
[    2.897724] pc : [<ffffff80083465fc>] lr : [<ffffff800854248c>] pstate: 80000045
[    2.897726] sp : ffffffc9768ab360
[    2.897732] x29: ffffffc9768ab360 x28: 0000000000000001
[    2.897738] x27: ffffffc97624c000 x26: 0000000000000000
[    2.897744] x25: 0000000000000080 x24: 0000000000006c00
[    2.897749] x23: 0000000000000005 x22: ffffffc97624c010
[    2.897755] x21: 0000000000000004 x20: 0000000000000004
[    2.897761] x19: ffffffc9763da000 x18: ffffffc976b2491c
[    2.897766] x17: 0000000000000007 x16: 0000000000000006
[    2.897771] x15: 0000000000000001 x14: 0000000000000001
[    2.897777] x13: 0000000000e31b70 x12: ffffffc9768a0080
[    2.897783] x11: 0000000000000000 x10: fffffffffffffb00
[    2.897788] x9 : 0000000000000000 x8 : 0000000000000000
[    2.897793] x7 : 0000000000000000 x6 : 00000000000001ac
[    2.897799] x5 : 00000000ffffffff x4 : 0000000000000000
[    2.897804] x3 : 0000000000000010 x2 : 0000000000000010
[    2.897810] x1 : ffffffc97624c010 x0 : 00000000000001ac
...
[    2.898494] Call trace:
[    2.898499] Exception stack(0xffffffc9768ab1a0 to 0xffffffc9768ab2c0)
[    2.898506] b1a0: ffffffc9763da000 0000000000000004 ffffffc9768ab360 ffffff80083465fc
[    2.898513] b1c0: ffffffc976801e00 ffffffc9762b8000 ffffffc9768ab1f0 ffffff80080ec158
[    2.898520] b1e0: ffffffc9768ab230 ffffff8008496d04 ffffffc975ce6d80 ffffffc9768ab36e
[    2.898527] b200: ffffffc9768ab36f ffffffc9768ab29d ffffffc9768ab29e ffffffc9768a0000
[    2.898533] b220: ffffffc9768ab250 ffffff80080e70c0 ffffffc9768ab270 ffffff8008496e44
[    2.898540] b240: 00000000000001ac ffffffc97624c010 0000000000000010 0000000000000010
[    2.898546] b260: 0000000000000000 00000000ffffffff 00000000000001ac 0000000000000000
[    2.898552] b280: 0000000000000000 0000000000000000 fffffffffffffb00 0000000000000000
[    2.898558] b2a0: ffffffc9768a0080 0000000000e31b70 0000000000000001 0000000000000001
[    2.898566] [<ffffff80083465fc>] __memcpy+0x7c/0x180
[    2.898574] [<ffffff800853e164>] nv04_fbcon_imageblit+0x1d4/0x2e8
[    2.898582] [<ffffff800853d6d0>] nouveau_fbcon_imageblit+0xd8/0xe0
[    2.898591] [<ffffff80083c4db4>] soft_cursor+0x154/0x1d8
[    2.898598] [<ffffff80083c47b4>] bit_cursor+0x4fc/0x538
[    2.898605] [<ffffff80083c0cfc>] fbcon_cursor+0x134/0x1a8
[    2.898613] [<ffffff800841c280>] hide_cursor+0x38/0xa0
[    2.898620] [<ffffff800841d420>] redraw_screen+0x120/0x228
[    2.898628] [<ffffff80083bf268>] fbcon_prepare_logo+0x370/0x3f8
[    2.898635] [<ffffff80083bf640>] fbcon_init+0x350/0x560
[    2.898641] [<ffffff800841c634>] visual_init+0xac/0x108
[    2.898648] [<ffffff800841df14>] do_bind_con_driver+0x1c4/0x3a8
[    2.898655] [<ffffff800841e4f4>] do_take_over_console+0x174/0x1e8
[    2.898662] [<ffffff80083bf8c4>] do_fbcon_takeover+0x74/0x100
[    2.898669] [<ffffff80083c3e44>] fbcon_event_notify+0x8cc/0x920
[    2.898680] [<ffffff80080d7e38>] notifier_call_chain+0x50/0x90
[    2.898685] [<ffffff80080d8214>] __blocking_notifier_call_chain+0x4c/0x90
[    2.898691] [<ffffff80080d826c>] blocking_notifier_call_chain+0x14/0x20
[    2.898696] [<ffffff80083c5e1c>] fb_notifier_call_chain+0x1c/0x28
[    2.898703] [<ffffff80083c81ac>] register_framebuffer+0x1cc/0x2e0
[    2.898712] [<ffffff800845da80>] drm_fb_helper_initial_config+0x288/0x3e8
[    2.898719] [<ffffff800853da20>] nouveau_fbcon_init+0xe0/0x118
[    2.898727] [<ffffff800852d2f8>] nouveau_drm_load+0x268/0x890
[    2.898734] [<ffffff8008466e24>] drm_dev_register+0xbc/0xc8
[    2.898740] [<ffffff8008468a88>] drm_get_pci_dev+0xa0/0x180
[    2.898747] [<ffffff800852cb28>] nouveau_drm_probe+0x1a0/0x1e0
[    2.898755] [<ffffff80083a32e0>] pci_device_probe+0x98/0x110
[    2.898763] [<ffffff800858e434>] driver_probe_device+0x204/0x2b0
[    2.898770] [<ffffff800858e58c>] __driver_attach+0xac/0xb0
[    2.898777] [<ffffff800858c3e0>] bus_for_each_dev+0x60/0xa0
[    2.898783] [<ffffff800858dbc0>] driver_attach+0x20/0x28
[    2.898789] [<ffffff800858d7b0>] bus_add_driver+0x1d0/0x238
[    2.898796] [<ffffff800858ed50>] driver_register+0x60/0xf8
[    2.898802] [<ffffff80083a20dc>] __pci_register_driver+0x3c/0x48
[    2.898809] [<ffffff8008468eb4>] drm_pci_init+0xf4/0x120
[    2.898818] [<ffffff8008c56fc0>] nouveau_drm_init+0x21c/0x230
[    2.898825] [<ffffff80080829d4>] do_one_initcall+0x8c/0x190
[    2.898832] [<ffffff8008c31af4>] kernel_init_freeable+0x14c/0x1f0
[    2.898839] [<ffffff80088a0c20>] kernel_init+0x10/0x100
[    2.898845] [<ffffff8008085e10>] ret_from_fork+0x10/0x40
[    2.898853] Code: a88120c7 a8c12027 a88120c7 a8c12027 (a88120c7)
[    2.898871] ---[ end trace d5713dcad023ee04 ]---
[    2.898888] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

In a toss-up between the GPU seeing stale data artefacts on some systems
vs. catastrophic kernel crashes on other systems, the latter would seem
to take precedence, so revert this change until the real underlying
problem can be fixed.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
[acourbot@nvidia.com: port to Nouveau tree, remove bits in lib/]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

to handle pptable format change on Polaris boards
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch.

Fixes: 91a25e46 ("drm/dp/mst: deallocate payload on port destruction")
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Cc: stable@vger.kernel.org
Cc: Mykola Lysenko <Mykola.Lysenko@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>

drm_crtc_helper_set_config only potentially touches connector->encoder
and encoder->crtc, so we only have to store those for all connectors
and encoders, respectively.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Since commit 0955c125 ("drm/crtc: take references to connectors used
in a modeset. (v2)"), the reference counts of all connectors in the
drm_mode_set given to drm_crtc_helper_set_config are incremented, and then
the reference counts of all connectors are decremented on success, but in a
temporary copy of the connector structure. This leads to the following
error after the first modeset on imx-drm:

    Unable to handle kernel NULL pointer dereference at virtual address 00000004
    pgd = ad8c4000
    [00000004] *pgd=3d9c5831, *pte=00000000, *ppte=00000000
    Internal error: Oops: 817 [#1] PREEMPT SMP ARM
    Modules linked in:
    CPU: 1 PID: 190 Comm: kmsfb-manage Not tainted 4.7.0-rc1+ #657
    Hardware name: Freescale i.MX6 Quad/DualLit: [<80506098>]    lr : [<80252e94>]    psr: 200c0013
    sp : adca7ca8  ip : adca7b90  fp : adca7cd4
    r10: 00000000  r9 : 00000100  r8 : 00000200
    r7 : af3c9800  r6 : aded7848  r5 : aded7800  r4 : 00000000
    r3 : af3ca058  r2 : 00000200  r1 : af3ca058  r0 : 00000000
    Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    Control: 10c5387d  Table: 3d8c404a  DAC: 00000051
    Process kmsfb-manage (pid: 190, stack limit = 0xadca6210)
    Stack: (0xadca7ca8 to 0xadca8000)
    7ca0:                   805190e0 aded7800 aded7820 80501a88 8155a290 af3c9c6c
    7cc0: adca7ddc 0000000f adca7cec adca7cd8 80519104 80506044 805190e0 aded7800
    7ce0: adca7d04 adca7cf0 80501ac0 805190ec aded7820 aded7814 adca7d24 adca7d08
    7d00: 804fdb80 80501a94 aded7800 af3ca010 aded7afc af3c9c60 adca7d94 adca7d28
    7d20: 804e3518 804fdb20 00000000 af3c9b1c adca7d50 81506f44 00000000 8093c500
    7d40: af3c9c6c ae4f2ca8 ae4f2c18 00000000 00000000 ae637f00 00000000 aded7800
    7d60: 00000001 af3c9800 af23c300 ae77fcc0 ae4f2c18 00000001 af3c9800 8155a290
    7d80: af1af700 adca6000 adca7db4 adca7d98 804fea6c 804e2de4 adca7e50 adb3d940
    7da0: 00000001 af3c9800 adca7e24 adca7db8 8050440c 804fea0c ae77fcc0 00000003
    7dc0: adca7e24 adb3d940 af1af700 ae77fcc0 ae77fccc ae4f2c18 8083d44c ae77fcc0
    7de0: ae4002 80d03040 adca7e64 adca7e40 adca7e50 80503f08
    7e40: 7ebd5630 adca7e50 00000068 c06864a2 7ebd5be8 00000000 00000001 00000018
    7e60: 00000026 00000000 00000000 00000000 00000001 000115bc 05010500 05a0059f
    7e80: 03200000 03360321 00000337 0000003c 00000000 00000040 30383231 30303878
    7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 80173058 80172e30
    7ec0: 80d77d32 00004000 adf7d900 00000003 00000000 7ebd5630 af342bb0 adfe3b80
    7ee0: 80272f50 00000003 adca6000 00000000 adca7f7c adca7f00 802725ec 804f52cc
    7f00: 802809cc 80178450 00000000 00000000 80280880 80145904 adb3d8c0 adf7d990
    7f20: ffffffff 00000003 00004000 01614c10 c06864a2 00000003 adca6000 00000000
    7f40: adca7f6c adca7f50 80280b04 8028088c 000115bc adfe3b81 7ebd5630 adfe3b80
    7f60: c06864a2 00000003 adca6000 00000000 adca7fa4 adca7f80 80272f50 80272548
    7f80: 000115bc 00017050 00000001 01614c10 00000036 801089e4 00000000 adca7fa8
    7fa0: 80108840 80272f18 00017050 00000001 00000003 c06864a2 7ebd5630 000115bc
    7fc0: 00017050 00000001 01614c10 00000036 00000003 00000000 00000026 00000018
    7fe0: 00016f38 7ebd562c 0000b5e9 76ef31e6 400c0030 00000003 ff5f37db bfe7dd4d
    Backtrace:
    [<80506038>] (drm_connector_cleanup) from [<80519104>] (dw_hdmi_connector_destroy+0x24/0x28)
     r10:0000000f r9:adca7ddc r8:af3c9c6c r7:8155a290 r6:80501a88 r5:aded7820
     r4:aded7800 r3:805190e0
    [<805190e0>] (dw_hdmi_connector_destroy) from [<80501ac0>] (drm_connector_free+0x38/0x3c)
     r4:aded7800 nreference) from [<804e3518>] (drm_crtc_helper_set_config+0x740/0xbf4)
     r6:af3c9c60 r5:aded7afc r4:af3ca010 r3:aded7800
    [<804e2dd8>] (drm_crtc_helper_set_config) from [<804fea6c>] (drm_mode_set_config_internal+0x6c/0xf4)
     r10:adca6000 r9:af1af700 r8:8155a290 r7:af3c9800 r6:00000001 r5:ae4f2c18
     r4:ae77fcc0
    [<804fea00>] (drm_mode_set_config_internal) from [<8050440c>] (drm_mode_setcrtc+0x504/0x57c)
     r7:af3c9800 r6:00000001 r5:adb3d940 r4:adca7e50
    [<80503f08>] (drm_mode_setcrtc) from [<804f5404>] (drm_ioctl+0x144/0x4dc)
     r10:ada2e000 r9:000000a2 r8:af3c9800 r7:8155a290 r6:809320b4 r5:00000051
     r4:adca7e50
    [<804f52c0>] (drm_ioctl) from [<802725ec>] (do_vfs_ioctl+0xb0/0x9d0)
     r10:00000000 r9:adca6000 r8:00000003 r7:80272f50 r6:adfe3b80 r5:af342bb0
     r4:7ebd5630
    [<8027253c>] (do_vfs_ioctl) from [<80272f50>] (SyS_ioctl+0x44/0x6c)
     r10:00000000 r9:adca6000 r8:00000003 r7:c06864a2 r6:adfe3b80 r5:7ebd5630
     r4:adfe3b81
    [<80272f0c>] (SyS_ioctl) from [<80108840>] (ret_fast_syscall+0x0/0x1c)
     r8:801089e4 r7:00000036 r6:01614c10 r5:00000001 r4:00017050 r3:000115bc
    Code: 0a00000c e5932004 e1a01003 e1a0a004 (e5842004)
    ---[ end trace 9a7257572ccacb16 ]---

Only the reference count of connectors that weren't previously bound to
an encoder should be incremented after a call to drm_crtc_helper_set_config.
And only the reference count of connectors that were previously bound to
an encoder and are unbound afterwards should ever be decremented.
The reference counts of the temporary copies in the save_connectors
should not be touched at all.

This patch fixes the above error by only incrementing the reference count
of those connectors in the set that are initially not bound to any encoder,
and also by restoring the reference count of only those connectors in the
set in the failure case.

"Note that this can only be hit when fbdev emulation is disabled, since
then the refcount drops from 1 to 0 and we call the connector destroy
functions on the backup copy, which eventually results in tears. With
fbdev emulation the refcount only goes down from 2 to 1 ever. And since we
unconditionally increment the refcount on the real object, the refcount of
that will slowly increase. The backup connector's refcount doesn't matter,
since we kfree() that either way in the end of
drm_crtc_helper_set_config()."

Fixes: 0955c125 ("drm/crtc: take references to connectors used in a modeset. (v2)")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

"Pretty much all regression fixes, or black screens."

* tag 'drm-intel-fixes-2016-06-14' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/ilk: Don't disable SSC source if it's in use
  drm/i915: Extract physical display dimensions from VBT
  drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
  drm/i915: Only ignore eDP ports that are connected
  drm/i915: Silence "unexpected child device config size" for VBT on 845g
  drm/i915: Fix NULL pointer deference when out of PLLs in IVB

Thanks to Ville Syrjälä for pointing me towards the cause of this issue.

Unfortunately one of the sideaffects of having the refclk for a DPLL set
to SSC is that as long as it's set to SSC, the GPU will prevent us from
powering down any of the pipes or transcoders using it. A couple of
BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL
configurations. This causes issues on the first modeset, since we don't
expect SSC to be left on and as a result, can't successfully power down
the pipes or the transcoders using it. Here's an example from this Dell
OptiPlex 990:

[drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
[drm:intel_modeset_init] 2 display pipes available.
[drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_reset] crt adpa set to 0xf40000
[drm:intel_dp_init_connector] Adding DP connector on port C
[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[drm:ironlake_init_pch_refclk] Disabling SSC entirely
… later we try committing the first modeset …
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A
[drm:intel_dump_pipe_config] cpu_transcoder: A
…
[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
[drm:intel_dump_pipe_config] planes on this crtc
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
[drm:intel_dump_pipe_config]     FB:42, fb = 800x600 format = 0x34325258
[drm:intel_dump_pipe_config]     scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
[drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
[drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
[drm:intel_disable_pipe] disabling pipe A
------------[ cut here ]------------
WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
pipe_off wait timed out
…
---[ end trace 94fc8aa03ae139e8 ]---
[drm:intel_dp_link_down]
[drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A

Later modesets succeed since they reset the DPLL's configuration anyway,
but this is enough to get stuck with a big fat warning in dmesg.

A better solution would be to add refcounts for the SSC source, but for
now leaving the source clock on should suffice.

Changes since v4:
 - Fix calculation of final for systems with LVDS panels (fixes BUG() on
   CI test suite)
Changes since v3:
 - Move temp variable into loop
 - Move checks for using_ssc_source to after we've figured out has_ck505
 - Add using_ssc_source to debug output
Changes since v2:
 - Fix debug output for when we disable the CPU source
Changes since v1:
 - Leave the SSC source clock on instead of just shutting it off on all
   of the DPLL configurations.

Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.comSigned-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

On 32-bit:

    fs/nfsd/blocklayout.c: In function ‘nfsd4_block_get_device_info_scsi’:
    fs/nfsd/blocklayout.c:337: warning: integer constant is too large for ‘long’ type
    fs/nfsd/blocklayout.c:344: warning: integer constant is too large for ‘long’ type
    fs/nfsd/blocklayout.c: In function ‘nfsd4_scsi_fence_client’:
    fs/nfsd/blocklayout.c:385: warning: integer constant is too large for ‘long’ type

Add the missing "ULL" postfix to 64-bit constant NFSD_MDS_PR_KEY to fix
this.

Fixes: f99d4fbd ("nfsd: add SCSI layout support")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Merge MIPS patches destined to both 4.7 and kvm/next, to avoid
unnecessary conflicts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When emulating TLB miss / invalid exceptions during CACHE instruction
emulation, be sure to set up the correct PC and host_cp0_badvaddr state
for the kvm_mips_emlulate_tlb*_ld() function to pick up for guest EPC
and BadVAddr.

PC needs to be rewound otherwise the guest EPC will end up pointing at
the next instruction after the faulting CACHE instruction.

host_cp0_badvaddr must be set because guest CACHE instructions trap with
a Coprocessor Unusable exception, which doesn't update the host BadVAddr
as a TLB exception would.

This doesn't tend to get hit when dynamic translation of emulated
instructions is enabled, since only the first execution of each CACHE
instruction actually goes through this code path, with subsequent
executions hitting the SYNCI instruction that it gets replaced with.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When a CACHE instruction is emulated by kvm_mips_emulate_cache(), the PC
is first updated to point to the next instruction, and afterwards it
falls through the "dont_update_pc" label, which rewinds the PC back to
its original address.

This works when dynamic translation of emulated instructions is enabled,
since the CACHE instruction is replaced with a SYNCI which works without
trapping, however when dynamic translation is disabled the guest hangs
on CACHE instructions as they always trap and are never stepped over.

Roughly swap the meanings of the "done" and "dont_update_pc" to match
kvm_mips_emulate_CP0(), so that "done" will roll back the PC on failure,
and "dont_update_pc" won't change PC at all (for the sake of exceptions
that have already modified the PC).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>