Code currently defines:

#define CONFIG_PCIE_PORT0
#define CONFIG_PCIE_PORT1
#define CONFIG_PCIE_PORT2
#define GPIO_PERST

and then compiles code only if they are defined.
We might want to disable some of these via devicetree one
day, but for now just remove the #defines and the
conditions - all the code for different ports is
easy to identify.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- remove white space at end of line.
- no more than 2 blank line at a time
- remove spaces before tabs
- use tabs to line things up
- re-indent some #define do{}while(0)
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As the Interrupts for the PCI adapters are listed in
devicetree we shouldn't need to have them explicit in the code.

The simplest way to do this is to use of_irq_parse_and_map_pci()
and specify an interrupt-map which identifies the different
PCI hosts by bus/slot numbers.
This has the advantage that the hwirq number are mapped to virq
numbers for us, so the ugly hack can go.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This lock is never initialized, locked once, and never unlocked.
Clearly it is pointless - so remove it.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtk_phy_link_adjust takes a spinlock and disables
interrupts, but never unlocks.
This can leave interrupts disabled on one CPU and
various things stop working.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current code has some barrier macros in it, which are already '#if
0' out, so just remove them.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit cleans the includes in the sd.c file. Those which are not
needed are removed, the remaining ones are sorted alphabetically.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro HOST_MAX_NUM is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code uses linked DMA mode only when there is more than one
entry in the scatterlist. But the overhead of the linked DMA is very
small, so the code is easier when only using linked DMA and this is
also the way, the upstream driver mtk-sd handles it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The msdc_dma_config function currently returns always 0. Remove the
return and change to void.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code disables the DMA after the transfer. That only changes
the transfer mode to non-DMA and does not save any power. This is not
necessary any more, because now DMA transfer is always used. The macro
for disabling DMA transfer is also removed, because it is not used any
more.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function msdc_set_blknum consists of one (real) line of code and
is only called once, so inline it makes the code shorter and more
readable.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code initialises the variable sg at the beginning of the
msdc_dma_config function. This is not necessary, because the variable
is assigned by the for_each_sg macro later on.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code checks the card status at the beginning of
msdc_ops_request. This is not necessary because mmc core always checks
the card status before calling this operation.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the code BUG()'s, if host->mrq is set at the beginning of
msdc_ops_request. This shoould normally not happen, but it is not that
critical, because the critical sections are protected by a spin lock
and in the worst case, some commands to the card are lost, so it is
sufficient to just WARN_ON().
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the code for the sdio irq is never used, because the flags
for it (MSDC_(EXT_)SDIO_IRQ) are never set. So the whole code for it
can be removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field abort of msdc_host is only set, but never read, so it can be
removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the value that data->error is set to is converted to an
unsigned int, but it is a usual error number, so it should be
negative.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field dma_xfer of the struct msdc_host is not used anymore, remove
it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the driver is capable of DMA and non-DMA transfer. But the
option to choose non-DMA transfer has already been removed. Now remove
also the code for the non-DMA transfer.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The global variable dma_size was previously used to select DMA or
non-DMA transfer mode based on the size of the data that should be
transferred. This option was removed preivously, so the variable is not
used any more and can be removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the transfer mode can be chosen between DMA, a size
dependent mode and non-DMA by writing to a proc file. The upstream
driver mtk-sd uses DMA all times. The previous patch removed the
ability to set that option.

Now the remaining uses of the transfer mode setting variable are
cleaned up, because it cannot be changed any more.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the transfer mode can be chosen between DMA, a size
dependent mode and non-DMA by writing to a proc file. The upstream
driver mtk-sd uses DMA all times.

There is no apparent reason why somebody would like to change the
transfer mode and the position of the setting in the debug part of the
driver also indicates, that the option was used for debugging
purposes. So it is removed to clean up the driver and bring it more in
line with the upstream one.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The static variable msdc_regs is set once, but never used, so remove
it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently sdr_get_field is a macro, to bring the code in line with the
upstream driver mtk-sd, it is changed to a function.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently sdr_set_field is a macro, to bring the code in line with the
upstream driver mtk-sd, it is changed to a function.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function uffs that is implemented by this driver returns the same
values as the kernel function ffs. So the uffs function is removed and
the calls to it are replaced with calls to ffs.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sdr_{read,write}16 macros are never used and does not provide any
information about the device, so they are removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro msdc_init_gpd_ex is never used and does not provied any
information about the hardware, so it is removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field clk_drv of msdc_hw is set to a constant and only used once,
replace that position with the constant and remove the unused field.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field cmd_drv of msdc_hw is set to a constant and only used once,
replace that position with the constant and remove the unused field.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field dat_drv of msdc_hw is set to a constant and only used once,
replace that position with the constant and remove the unused field.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field data_edge of msdc_hw is set to a constant and only used once,
replace that position with the constant and remove the unused field.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field cmd_edge of msdc_hw is set to a constant and only used once,
replace that position with the constant and remove the unused field.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The type pm_message does not exist in the kernel, the correct type is
pm_message_t, so the type of the parameter is corrected.

Fixes: 9673d9f6 ("staging: mt7621-mmc: Refactor suspend, resume")
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since there is no vchiq function listed by "make checkstack" anymore,
we can remove the stack hog issue from the TODO.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes an unnecessary break which has been reported by checkpatch.pl.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removing an unnecessary return which has been reported by checkpatch.pl.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes a whitespace issue reported by checkpatch:

ERROR: code indent should use tabs where possible
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The definition of USE_VCHIQ_ARM and VCOS_VERIFY_BKPTS isn't really necessary
so remove them.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>