- 13 May, 2020 13 commits
-
-
Paolo Bonzini authored
Report NMIs as allowed when the vCPU is in L2 and L2 is being run with Exit-on-NMI enabled, as NMIs are always unblocked from L1's perspective in this case. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Report NMIs as allowed when the vCPU is in L2 and L2 is being run with Exit-on-NMI enabled, as NMIs are always unblocked from L1's perspective in this case. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200423022550.15113-7-sean.j.christopherson@intel.com> Signed-off-by:
-
Paolo Bonzini authored
Do not hardcode is_smm so that all the architectural conditions for blocking SMIs are listed in a single place. Well, in two places because this introduces some code duplication between Intel and AMD. This ensures that nested SVM obeys GIF in kvm_vcpu_has_events. Signed-off-by: -
Sean Christopherson authored
Return an actual bool for kvm_x86_ops' {interrupt_nmi}_allowed() hook to better reflect the return semantics, and to avoid creating an even bigger mess when the related VMX code is refactored in upcoming patches. Signed-off-by: -
Sean Christopherson authored
Re-request KVM_REQ_EVENT if vcpu_enter_guest() bails after processing pending requests and an immediate exit was requested. This fixes a bug where a pending event, e.g. VMX preemption timer, is delayed and/or lost if the exit was deferred due to something other than a higher priority _injected_ event, e.g. due to a pending nested VM-Enter. This bug only affects the !injected case as kvm_x86_ops.cancel_injection() sets KVM_REQ_EVENT to redo the injection, but that's purely serendipitous behavior with respect to the deferred event. Note, emulated preemption timer isn't the only event that can be affected, it simply happens to be the only event where not re-requesting KVM_REQ_EVENT is blatantly visible to the guest. Fixes: f4124500 ("KVM: nVMX: Fully emulate preemption timer") Signed-off-by:
-
Sean Christopherson authored
Add a kvm_x86_ops hook to detect a nested pending "hypervisor timer" and use it to effectively open a window for servicing the expired timer. Like pending SMIs on VMX, opening a window simply means requesting an immediate exit. This fixes a bug where an expired VMX preemption timer (for L2) will be delayed and/or lost if a pending exception is injected into L2. The pending exception is rightly prioritized by vmx_check_nested_events() and injected into L2, with the preemption timer left pending. Because no window opened, L2 is free to run uninterrupted. Fixes: f4124500 ("KVM: nVMX: Fully emulate preemption timer") Reported-by:
Jim Mattson <jmattson@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Peter Shier <pshier@google.com> Signed-off-by:
-
Sean Christopherson authored
Short circuit vmx_check_nested_events() if an exception is pending and needs to be injected into L2, priority between coincident events is not dependent on exiting behavior. This fixes a bug where a single-step #DB that is not intercepted by L1 is incorrectly dropped due to servicing a VMX Preemption Timer VM-Exit. Injected exceptions also need to be blocked if nested VM-Enter is pending or an exception was already injected, otherwise injecting the exception could overwrite an existing event injection from L1. Technically, this scenario should be impossible, i.e. KVM shouldn't inject its own exception during nested VM-Enter. This will be addressed in a future patch. Note, event priority between SMI, NMI and INTR is incorrect for L2, e.g. SMI should take priority over VM-Exit on NMI/INTR, and NMI that is injected into L2 should take priority over VM-Exit INTR. This will also be addressed in a future patch. Fixes: b6b8a145 ("KVM: nVMX: Rework interception of IRQs and NMIs") Reported-by:
-
Cathy Avery authored
Migrate nested guest NMI intercept processing to new check_nested_events. Signed-off-by:
Cathy Avery <cavery@redhat.com> Message-Id: <20200414201107.22952-2-cavery@redhat.com> [Reorder clauses as NMIs have higher priority than IRQs; inject immediate vmexit as is now done for IRQ vmexits. - Paolo] Signed-off-by:
-
Paolo Bonzini authored
We can immediately leave SVM guest mode in svm_check_nested_events now that we have the nested_run_pending mechanism. This makes things easier because we can run the rest of inject_pending_event with GIF=0, and KVM will naturally end up requesting the next interrupt window. Signed-off-by: -
Paolo Bonzini authored
Similar to VMX, we need to leave the halted state when performing a vmexit. Failure to do so will cause a hang after vmexit. Signed-off-by: -
Paolo Bonzini authored
We want to inject vmexits immediately from svm_check_nested_events, so that the interrupt/NMI window requests happen in inject_pending_event right after it returns. This however has the same issue as in vmx_check_nested_events, so introduce a nested_run_pending flag with the exact same purpose of delaying vmexit injection after the vmentry. Signed-off-by: -
Paolo Bonzini authored
-
Babu Moger authored
Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU resource isn't. It can be read with XSAVE and written with XRSTOR. So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state), the guest can read the host value. In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could potentially use XRSTOR to change the host PKRU value. While at it, move pkru state save/restore to common code and the host_pkru field to kvm_vcpu_arch. This will let SVM support protection keys. Cc: stable@vger.kernel.org Reported-by:
Babu Moger <babu.moger@amd.com> Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com> Signed-off-by:
-
- 08 May, 2020 5 commits
-
-
Suravee Suthikulpanit authored
The commit 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1") introduced a WARN_ON, which checks if AVIC is enabled when trying to set V_IRQ in the VMCB for enabling irq window. The following warning is triggered because the requesting vcpu (to deactivate AVIC) does not get to process APICv update request for itself until the next #vmexit. WARNING: CPU: 0 PID: 118232 at arch/x86/kvm/svm/svm.c:1372 enable_irq_window+0x6a/0xa0 [kvm_amd] RIP: 0010:enable_irq_window+0x6a/0xa0 [kvm_amd] Call Trace: kvm_arch_vcpu_ioctl_run+0x6e3/0x1b50 [kvm] ? kvm_vm_ioctl_irq_line+0x27/0x40 [kvm] ? _copy_to_user+0x26/0x30 ? kvm_vm_ioctl+0xb3e/0xd90 [kvm] ? set_next_entity+0x78/0xc0 kvm_vcpu_ioctl+0x236/0x610 [kvm] ksys_ioctl+0x8a/0xc0 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x58/0x210 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes by sending APICV update request to all other vcpus, and immediately update APIC for itself. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lkml.org/lkml/2020/5/2/167 Fixes: 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1") Message-Id: <1588818939-54264-1-git-send-email-suravee.suthikulpanit@amd.com> Signed-off-by:
-
Suravee Suthikulpanit authored
This allows making request to all other vcpus except the one specified in the parameter. Signed-off-by:
-
Paolo Bonzini authored
When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD), DR6 was incorrectly copied from the value in the VM. Instead, DR6.BD should be set in order to catch this case. On AMD this does not need any special code because the processor triggers a #DB exception that is intercepted. However, the testcase would fail without the previous patch because both DR6.BS and DR6.BD would be set. Signed-off-by: -
Paolo Bonzini authored
There are two issues with KVM_EXIT_DEBUG on AMD, whose root cause is the different handling of DR6 on intercepted #DB exceptions on Intel and AMD. On Intel, #DB exceptions transmit the DR6 value via the exit qualification field of the VMCS, and the exit qualification only contains the description of the precise event that caused a vmexit. On AMD, instead the DR6 field of the VMCB is filled in as if the #DB exception was to be injected into the guest. This has two effects when guest debugging is in use: * the guest DR6 is clobbered * the kvm_run->debug.arch.dr6 field can accumulate more debug events, rather than just the last one that happened (the testcase in the next patch covers this issue). This patch fixes both issues by emulating, so to speak, the Intel behavior on AMD processors. The important observation is that (after the previous patches) the VMCB value of DR6 is only ever observable from the guest is KVM_DEBUGREG_WONT_EXIT is set. Therefore we can actually set vmcb->save.dr6 to any value we want as long as KVM_DEBUGREG_WONT_EXIT is clear, which it will be if guest debugging is enabled. Therefore it is possible to enter the guest with an all-zero DR6, reconstruct the #DB payload from the DR6 we get at exit time, and let kvm_deliver_exception_payload move the newly set bits into vcpu->arch.dr6. Some extra bits may be included in the payload if KVM_DEBUGREG_WONT_EXIT is set, but this is harmless. This may not be the most optimized way to deal with this, but it is simple and, being confined within SVM code, it gets rid of the set_dr6 callback and kvm_update_dr6. Signed-off-by: -
Paolo Bonzini authored
kvm_x86_ops.set_dr6 is only ever called with vcpu->arch.dr6 as the second argument. Ensure that the VMCB value is synchronized to vcpu->arch.dr6 on #DB (both "normal" and nested) and nested vmentry, so that the current value of DR6 is always available in vcpu->arch.dr6. The get_dr6 callback can just access vcpu->arch.dr6 and becomes redundant. Signed-off-by:
-
- 07 May, 2020 6 commits
-
-
Paolo Bonzini authored
Signed-off-by: -
Peter Xu authored
Covers fundamental tests for KVM_SET_GUEST_DEBUG. It is very close to the debug test in kvm-unit-test, but doing it from outside the guest. Signed-off-by:
Peter Xu <peterx@redhat.com> Message-Id: <20200505205000.188252-4-peterx@redhat.com> Signed-off-by:
-
Peter Xu authored
When single-step triggered with KVM_SET_GUEST_DEBUG, we should fill in the pc value with current linear RIP rather than the cached singlestep address. Signed-off-by:
-
Peter Xu authored
RTM should always been set even with KVM_EXIT_DEBUG on #DB. Signed-off-by:
-
Paolo Bonzini authored
Go through kvm_queue_exception_p so that the payload is correctly delivered through the exit qualification, and add a kvm_update_dr6 call to kvm_deliver_exception_payload that is needed on AMD. Reported-by:
-
Peter Xu authored
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared as supported. My wild guess is that userspaces like QEMU are using "#ifdef KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be wrong because the compilation host may not be the runtime host. The userspace might still want to keep the old "#ifdef" though to not break the guest debug on old kernels. Signed-off-by:
-
- 06 May, 2020 4 commits
-
-
Peter Xu authored
I got this error when building kvm selftests: /usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here /usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here I think it's because evmcs.h is included both in a test file and a lib file so the structs have multiple declarations when linking. After all it's not a good habit to declare structs in the header files. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Using CPUID data can be useful for the processor compatibility check, but that's it. Using it to compute guest-reserved bits can have both false positives (such as LA57 and UMIP which we are already handling) and false negatives: in particular, with this patch we don't allow anymore a KVM guest to set CR4.PKE when CR4.PKE is clear on the host. Fixes: b9dd21e1 ("KVM: x86: simplify handling of PKRU") Reported-by:
-
Sean Christopherson authored
Clear CF and ZF in the VM-Exit path after doing __FILL_RETURN_BUFFER so that KVM doesn't interpret clobbered RFLAGS as a VM-Fail. Filling the RSB has always clobbered RFLAGS, its current incarnation just happens clear CF and ZF in the processs. Relying on the macro to clear CF and ZF is extremely fragile, e.g. commit 089dd8e5 ("x86/speculation: Change FILL_RETURN_BUFFER to work with objtool") tweaks the loop such that the ZF flag is always set. Reported-by:
Qian Cai <cai@lca.pw> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Fixes: f2fde6a5 ("KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit") Signed-off-by:
-
Kashyap Chamarthy authored
This is a rewrite of this[1] Wiki page with further enhancements. The doc also includes a section on debugging problems in nested environments, among other improvements. [1] https://www.linux-kvm.org/page/Nested_GuestsSigned-off-by:
Kashyap Chamarthy <kchamart@redhat.com> Message-Id: <20200505112839.30534-1-kchamart@redhat.com> Signed-off-by:
-
- 04 May, 2020 6 commits
-
-
Paolo Bonzini authored
Commit f458d039 ("kvm: ioapic: Lazy update IOAPIC EOI") introduces the following infinite loop: BUG: stack guard page was hit at 000000008f595917 \ (stack is 00000000bdefe5a4..00000000ae2b06f5) kernel stack overflow (double-fault): 0000 [#1] SMP NOPTI RIP: 0010:kvm_set_irq+0x51/0x160 [kvm] Call Trace: irqfd_resampler_ack+0x32/0x90 [kvm] kvm_notify_acked_irq+0x62/0xd0 [kvm] kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm] ioapic_set_irq+0x20e/0x240 [kvm] kvm_ioapic_set_irq+0x5c/0x80 [kvm] kvm_set_irq+0xbb/0x160 [kvm] ? kvm_hv_set_sint+0x20/0x20 [kvm] irqfd_resampler_ack+0x32/0x90 [kvm] kvm_notify_acked_irq+0x62/0xd0 [kvm] kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm] ioapic_set_irq+0x20e/0x240 [kvm] kvm_ioapic_set_irq+0x5c/0x80 [kvm] kvm_set_irq+0xbb/0x160 [kvm] ? kvm_hv_set_sint+0x20/0x20 [kvm] .... The re-entrancy happens because the irq state is the OR of the interrupt state and the resamplefd state. That is, we don't want to show the state as 0 until we've had a chance to set the resamplefd. But if the interrupt has _not_ gone low then ioapic_set_irq is invoked again, causing an infinite loop. This can only happen for a level-triggered interrupt, otherwise irqfd_inject would immediately set the KVM_USERSPACE_IRQ_SOURCE_ID high and then low. Fortunately, in the case of level-triggered interrupts the VMEXIT already happens because TMR is set. Thus, fix the bug by restricting the lazy invocation of the ack notifier to edge-triggered interrupts, the only ones that need it. Tested-by:
-
Suravee Suthikulpanit authored
Current logic incorrectly uses the enum ioapic_irq_destination_types to check the posted interrupt destination types. However, the value was set using APIC_DM_XXX macros, which are left-shifted by 8 bits. Fixes by using the APIC_DM_FIXED and APIC_DM_LOWEST instead. Fixes: (fdcf7562 'KVM: x86: Disable posted interrupts for non-standard IRQs delivery modes') Cc: Alexander Graf <graf@amazon.com> Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Tested-by:
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for Linux 5.7, take #2 - Fix compilation with Clang - Correctly initialize GICv4.1 in the absence of a virtual ITS - Move SP_EL0 save/restore to the guest entry/exit code - Handle PC wrap around on 32bit guests, and narrow all 32bit registers on userspace access
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for Linux 5.7, take #1 - Prevent the userspace API from interacting directly with the HW stage of the virtual GIC - Fix a couple of vGIC memory leaks - Tighten the rules around the use of the 32bit PSCI functions for 64bit guest, as well as the opposite situation (matches the specification)
-
Paolo Bonzini authored
The corresponding code was added for VMX in commit 42dbaa5a ("KVM: x86: Virtualize debug registers, 2008-12-15) but never for AMD. Fix this. Signed-off-by:
-
Sean Christopherson authored
Use BUG() in the impossible-to-hit default case when switching on the scope of INVEPT to squash a warning with clang 11 due to clang treating the BUG_ON() as conditional. >> arch/x86/kvm/vmx/nested.c:5246:3: warning: variable 'roots_to_free' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] BUG_ON(1); Reported-by:kbuild test robot <lkp@intel.com> Fixes: ce8fe7b7 ("KVM: nVMX: Free only the affected contexts when emulating INVEPT") Signed-off-by:
-
- 01 May, 2020 1 commit
-
-
Marc Zyngier authored
In the unlikely event that a 32bit vcpu traps into the hypervisor on an instruction that is located right at the end of the 32bit range, the emulation of that instruction is going to increment PC past the 32bit range. This isn't great, as userspace can then observe this value and get a bit confused. Conversly, userspace can do things like (in the context of a 64bit guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0, set PC to a 64bit value, change PSTATE to AArch32-USR, and observe that PC hasn't been truncated. More confusion. Fix both by: - truncating PC increments for 32bit guests - sanitizing all 32bit regs every time a core reg is changed by userspace, and that PSTATE indicates a 32bit mode. Cc: stable@vger.kernel.org Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
Marc Zyngier <maz@kernel.org>
-
- 30 Apr, 2020 3 commits
-
-
Marc Zyngier authored
KVM now expects to be able to use HW-accelerated delivery of vSGIs as soon as the guest has enabled thm. Unfortunately, we only initialize the GICv4 context if we have a virtual ITS exposed to the guest. Fix it by always initializing the GICv4.1 context if it is available on the host. Fixes: 2291ff2f ("KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor") Reviewed-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Marc Zyngier authored
We currently save/restore sp_el0 in C code. This is a bit unsafe, as a lot of the C code expects 'current' to be accessible from there (and the opportunity to run kernel code in HYP is specially great with VHE). Instead, let's move the save/restore of sp_el0 to the assembly code (in __guest_enter), making sure that sp_el0 is correct very early on when we exit the guest, and is preserved as long as possible to its host value when we enter the guest. Reviewed-by:
Andrew Jones <drjones@redhat.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Fangrui Song authored
SYM_CODE_START defines \label , so it is redundant to define \label again. A redefinition at the same place is accepted by GNU as (https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=159fbb6088f17a341bcaaac960623cab881b4981) but rejected by the clang integrated assembler. Fixes: 617a2f39 ("arm64: kvm: Annotate assembly using modern annoations") Signed-off-by:
Fangrui Song <maskray@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
-
- 24 Apr, 2020 2 commits
-
-
Paolo Bonzini authored
VMRUN is not supported inside the SMM handler and the behavior is undefined. Just raise a #UD. Signed-off-by: -
David Matlack authored
KVM_CAP_HALT_POLL is a per-VM capability that lets userspace control the halt-polling time, allowing halt-polling to be tuned or disabled on particular VMs. With dynamic halt-polling, a VM's VCPUs can poll from anywhere from [0, halt_poll_ns] on each halt. KVM_CAP_HALT_POLL sets the upper limit on the poll time. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Jon Cargille <jcargill@google.com> Reviewed-by:
-
