When a path target responds to a path request, its response
always contains the most up-to-date information; accordingly,
it should use the latest target_sn, regardless of
net_traversal_jiffies().  Otherwise, only the first path
response is considered when constructing a path, as it will
have the highest target_sn of all replies during that period.
Signed-off-by: Bob Copeland <bob@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Previously, the code to copy the RSN IE from the mesh config
would increment its pointer by one in the loop instead of by
the element length, so there was the potential for mistaking
another IE's data fields as the RSN IE.

cfg80211_find_ie() exists, so just use that.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

u16_field_get() is a simple wrapper around get_unaligned_le16(),
and it is being assigned to a u16, so there's no need to
promote to u32 in the middle.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This can be useful for testing purposes to confirm valid AP behavior on
HT 20/40 co-existence functionality.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This allows processing of the last regulatory request when
we determine its still pending. Without this if a regulatory
request failed to get processed by userspace we wouldn't
be able to re-process it later. An example situation that can
lead to an unprocessed last_request is enabling cfg80211 to
be built-in to the kernel, not enabling CFG80211_INTERNAL_REGDB
and the CRDA binary not being available at the time the udev
rule that kicks of CRDA triggers.

In such a situation we want to let some cfg80211 triggers
eventually kick CRDA for us again. Without this if the first
cycle attempt to kick off CRDA failed we'd be stuck without
the ability to change process any further regulatory domains.

cfg80211 will trigger re-processing of the regulatory queue
whenever schedule_work(&reg_work) is called, currently this
happens when:

  * suspend / resume
  * disconnect
  * a beacon hint gets triggered (non DFS 5 GHz AP found)
  * a regulatory request gets added to the queue

We don't have any specific opportunistic late boot triggers
to address a late mount of where CRDA resides though, adding
that should be done separately through another patch.
Without an opportunistic fix then this fix relies at least
one of the triggeres above to happen.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Avoid freeing the last request while it is being processed. This can
happen in some cases if reg_work is kicked for some reason while the
currently pending request is in flight.

Cc: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Eliad Peller <eliad@wizery.com>
Tested-by: Colleen Twitty <colleen@cozybit.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Set DFS CAC time also in case of using custom
and strict regulatory from drivers. In other case
we could have unset DFS CAC time directly after
driver loaded and before issue regulatory set from
user mode.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When looking for a BSS matching given parameters, ignore invalid
BSSIDs. This avoids, for example, trying to join an IBSS that has
a multicast BSSID, which isn't supported by all drivers nor is it
a valid configuration of the IBSS so better create a new one with
a correctly chosen random BSSID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Don't allow using a multicast address as the BSSID, that
isn't a valid configuration.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211_wext_freq() is declared in wext-compat.h, but its
parameter struct wiphy's declaration is not included there.
As the parameter isn't used, just remove it.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
[remove parameter instead of changing to netdev]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Some header files in mac80211 don't include all the
header files they require, fix that.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The channels with 5/10MHz bandwidth are not HT. We have to
reflect this in conf_is_ht() function which returns whether the
particular channel is HT or not.
Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Commit a2f73b6c ("cfg80211: move regulatory flags to their own variable")
renamed WIPHY_FLAG_CUSTOM_REGULATORY to REGULATORY_CUSTOM_REG, but missed to
update one comment.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This allows user-space (wpa_supplicant) to disable LDPC coding.
Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

All bits from radar_detect must match combination
radar bitmask. Otherwise it is theoretically
possible to lead into an invalid combination
provided a driver reports strange combinations.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

With single-channel drivers, we need to be able to change a running
chanctx if we want to use chanctx reservation.  Not all drivers may be
able to do this, so add a flag that indicates support for it.

Changing a running chanctx can also be used as an optimization in
multi-channel drivers when the context needs to be reserved for future
usage.

Introduce IEEE80211_CHANCTX_RESERVED chanctx mode to mark a channel as
reserved so nobody else can use it (since we know it's going to
change).  In the future, we may allow several vifs to use the same
reservation as long as they plan to use the chanctx on the same
future channel.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In order to support channel switch with multiple vifs and multiple
contexts, we implement a concept of channel context reservation.  This
allows us to reserve a channel context to be used later.

The reservation functionality is not tied directly to channel switch
and may be used in other situations (eg. reserving a channel context
during IBSS join).

We first check if an existing compatible context exists and if it
does, we reserve it.  If there is no compatible context we create a
new one and reserve it.

Additionally, split ieee80211_vif_copy_chanctx_to_vlans() so we can
call it while already holding the chanctx mutex.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Combine the functions into one, so that we can switch from one context
to the other without having to unassign and assign separately.  This
is needed by the channel reservation functionality because otherwise
we have a small period of time when the chanctx is set to NULL, which
can cause problems if someone else is trying to dereference it.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211_vif_change_channel() locks chanctx_mtx.  When implementing
channel reservation for CS, we will need to call the function to
change channel when the lock is already held, so split the part that
requires the lock out and leave the locking in the original function.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

It was impossible to change chanctx of master AP
for AP VLANs because the copy function requires
RTNL which can't be simply taken in mac80211 code
due to possible deadlocks.

This is required for future chanctx reservation
that re-bind vifs to new chanctx. This requires
safe AP VLAN iteration without RTNL.

Now VLANs can be iterated while holding either
RTNL or local->mtx because the list is modified
while holding both of these locks.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Get rid of the cfg80211_can_add_interface() and
cfg80211_can_change_interface() functions by moving that functionality
to mac80211.  With this patch all interface combination checks are now
out of cfg80211 (except for the channel switch case which will be
addressed in a future commit).

Additionally, modify the ieee80211_check_combinations() function so
that an undefined chandef can be passed, in order to use it before a
channel is defined.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Now that mac80211 can check the interface combinations itself, move
the combinations check from cfg80211 to mac80211 when joining an IBSS.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Move the counting part of the interface combination check from
cfg80211 to mac80211.

This is needed to simplify locking when the driver has to perform a
combination check by itself (eg. with channel-switch).
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Some interface types don't require DFS (such as STATION, P2P_CLIENT
etc).  In order to centralize these decisions, make
cfg80211_chandef_dfs_required() take the iftype into consideration.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Separate the code that counts the interface types and channels from
the code that check the interface combinations.  The new function that
checks for combinations is exported so it can be called by the
drivers.

This is done in preparation for moving the interface combinations
checks out of cfg80211.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Allow GO operation on a channel marked with IEEE80211_CHAN_INDOOR_ONLY
iff there is a user hint indicating that the platform is operating in
an indoor environment, i.e., the platform is a printer or media center
device.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add the option to hint the wireless core that it is operating in an indoor
environment.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT
iff there is an active station interface that is associated to
an AP operating on the same channel in the 2 GHz band or the same UNII band
(in the 5 GHz band). This relaxation is not allowed if the channel is
marked with IEEE80211_CHAN_RADAR.

Note that this is a permissive approach to the FCC definitions,
that require a clear assessment that the device operating the AP is
an authorized master, i.e., with radar detection and DFS capabilities.

It is assumed that such restrictions are enforced by user space.
Furthermore, it is assumed, that if the conditions that allowed for
the operation of the GO on such a channel change, i.e., the station
interface disconnected from the AP, it is the responsibility of user
space to evacuate the GO from the channel.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Move the regulatory cellular base station hints support under
a specific configuration option and make the option depend
on CFG80211_CERTIFICATION_ONUS.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The FCC are clarifying some soft configuration requirements,
which among other include the following:

1. Indoor operation, where a device can use channels requiring indoor
   operation, subject to that it can guarantee indoor operation,
   i.e., the device is connected to AC Power or the device is under
   the control of a local master that is acting as an AP and is
   connected to AC Power.
2. Concurrent GO operation, where devices may instantiate a P2P GO
   while they are under the guidance of an authorized master. For example,
   on a channel on which a BSS is connected to an authorized master, i.e.,
   with DFS and radar detection capability in the UNII band.

See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122

Add support for advertising Indoor-only and GO-Concurrent channel
properties.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Wdev->ssid_len has already been set in cfg80211_connect() and is equal
to connect->ssid_len. Use wdev->ssid_len instead of connect->ssid_len
so it will be consistent with previous ssid assignment statement.

If bss is found in cfg80211_get_conn_bss(), wdev->conn->state is set
to CFG80211_CONN_AUTHENTICATE_NEXT in there. So it's not needed to set
it manually to CFG80211_CONN_AUTHENTICATE_NEXT if bss is found in that
function.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

rcu_assign_pointer() ensures that the initialization of a structure is
carried out before storing a pointer to that structure. However, in the
case that NULL is assigned there's no structure to initialize so using
RCU_INIT_POINTER instead is safe and more efficient.
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
[squash eight tiny patches, rewrite commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

rcu_assign_pointer() ensures that the initialization of a structure is
carried out before storing a pointer to that structure. However, in the
case that NULL is assigned there's no structure to initialize so using
RCU_INIT_POINTER instead is safe and more efficient.
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
[rewrite commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This will allow the low level driver to make decision based
on the vif such as queues etc...
Since the vif might be NULL, we can't add it to the tracing
functions.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[fix staging rtl8821ae driver]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When dynamically creating interfaces from userspace, e.g. for P2P usage,
such interfaces are usually owned by the process that created them, i.e.
wpa_supplicant. Should wpa_supplicant crash, such interfaces will often
cease operating properly and cause problems on restarting the process.

To avoid this problem, introduce an ownership concept for interfaces. If
an interface is owned by a netlink socket, then it will be destroyed if
the netlink socket is closed for any reason, including if the process it
belongs to crashed. This gives us a race-free way to get rid of any such
interfaces.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Replaced the use of a Variable Length Array In Struct (VLAIS) with a
C99 compliant equivalent. This is the original VLAIS struct.

struct {
	struct aead_request     req;
	u8                      priv[crypto_aead_reqsize(tfm)];
} aead_req;

This patch instead allocates the appropriate amount of memory using a
char array.

The new code can be compiled with both gcc and clang.
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
[small style cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

Pull HID updates from Jiri Kosina:
 - substantial cleanup of the generic and transport layers, in the
   direction of an ultimate goal of making struct hid_device completely
   transport independent, by Benjamin Tissoires
 - cp2112 driver from David Barksdale
 - a lot of fixes and new hardware support (Dualshock 4) to hid-sony
   driver, by Frank Praznik
 - support for Win 8.1 multitouch protocol by Andrew Duggan
 - other smaller fixes / device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits)
  HID: sony: fix force feedback mismerge
  HID: sony: Set the quriks flag for Bluetooth controllers
  HID: sony: Fix Sixaxis cable state detection
  HID: uhid: Add UHID_CREATE2 + UHID_INPUT2
  HID: hyperv: fix _raw_request() prototype
  HID: hyperv: Implement a stub raw_request() entry point
  HID: hid-sensor-hub: fix sleeping function called from invalid context
  HID: multitouch: add support for Win 8.1 multitouch touchpads
  HID: remove hid_output_raw_report transport implementations
  HID: sony: do not rely on hid_output_raw_report
  HID: cp2112: remove the last hid_output_raw_report() call
  HID: cp2112: remove various hid_out_raw_report calls
  HID: multitouch: add support of other generic collections in hid-mt
  HID: multitouch: remove pen special handling
  HID: multitouch: remove registered devices with default behavior
  HID: hidp: Add a comment that some devices depend on the current behavior of uniq
  HID: sony: Prevent duplicate controller connections.
  HID: sony: Perform a boundry check on the sixaxis battery level index.
  HID: sony: Fix work queue issues
  HID: sony: Fix multi-line comment styling
  ...

Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science -- mostly documentation and comment updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  sparse: fix comment
  doc: fix double words
  isdn: capi: fix "CAPI_VERSION" comment
  doc: DocBook: Fix typos in xml and template file
  Bluetooth: add module name for btwilink
  driver core: unexport static function create_syslog_header
  mmc: core: typo fix in printk specifier
  ARM: spear: clean up editing mistake
  net-sysfs: fix comment typo 'CONFIG_SYFS'
  doc: Insert MODULE_ in module-signing macros
  Documentation: update URL to hfsplus Technote 1150
  gpio: update path to documentation
  ixgbe: Fix format string in ixgbe_fcoe.
  Kconfig: Remove useless "default N" lines
  user_namespace.c: Remove duplicated word in comment
  CREDITS: fix formatting
  treewide: Fix typo in Documentation/DocBook
  mm: Fix warning on make htmldocs caused by slab.c
  ata: ata-samsung_cf: cleanup in header file
  idr: remove unused prototype of idr_free()

Pull sched/idle changes from Ingo Molnar:
 "More idle code reorganization, to prepare for more integration.

  (Sent separately because it depended on pending timer work, which is
  now upstream)"

* 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/idle: Add more comments to the code
  sched/idle: Move idle conditions in cpuidle_idle main function
  sched/idle: Reorganize the idle loop
  cpuidle/idle: Move the cpuidle_idle_call function to idle.c
  idle/cpuidle: Split cpuidle_idle_call main function into smaller functions