Pull more drm fixes from Dave Airlie:
 "Although the tree built for me fine on arm here, it appears either
  header cleanups in next or some kconfig combo it breaks, so this
  contains a fix to mediatek to include dma-mapping.h explicitly.

  There was also one nouveau fix that came in late that I was going to
  leave until next week, but since I was sending this I thought it may
  as well be in here:

  mediatek:
   - fix build in some cases

  nouveau:
   - fix hang with i2c and mst docks"

* tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm:
  drm/mediatek: include dma-mapping header
  drm/nouveau: Don't retry infinitely when receiving no data on i2c over AUX

Although it builds fine here in my arm cross compile, it seems
either via some other patches in -next or some Kconfig combination,
this fails to build for everyone.

Include linux/dma-mapping.h should fix it.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull rdma fixes from Doug Ledford:
 "No beating around the bush: this is a monster pull request for an -rc5
  kernel. Intel hit me with a series of fixes for TID processing.
  Mellanox hit me with a series for their UMR memory support.

  And we had one fix for siw that fixes the 32bit build warnings and
  because of the number of casts that had to be changed to properly
  silence the warnings, that one patch alone is a full 40% of the LOC of
  this entire pull request. Given that this is the initial release
  kernel for siw, I'm trying to fix anything in it that we can, so that
  adds to the impetus to take fixes for it like this one.

  I had to do a rebase early in the week. Jason had thought he put a
  patch on the rc queue that he needed to be there so he could base some
  work off of it, and it had actually not been placed there. So he asked
  me (on Tuesday) to fix that up before pushing my wip branch to the
  official rc branch. I did, and that's why the early patches look like
  they were all committed at the same time on Tuesday. That bunch had
  been in my queue prior.

  The various patches all pass my test for being legitimate fixes and
  not attempts to slide new features or development into a late rc.
  Well, they were all fixes with the exception of a couple clean up
  patches people wrote for making the fixes they also wrote better (like
  a cleanup patch to move UMR checking into a function so that the
  remaining UMR fix patches can reference that function), so I left
  those in place too.

  My apologies for the LOC count and the number of patches here, it's
  just how the cards fell this cycle.

  Summary:

   - Fix siw buffer mapping issue

   - Fix siw 32/64 casting issues

   - Fix a KASAN access issue in bnxt_re

   - Fix several memory leaks (hfi1, mlx4)

   - Fix a NULL deref in cma_cleanup

   - Fixes for UMR memory support in mlx5 (4 patch series)

   - Fix namespace check for restrack

   - Fixes for counter support

   - Fixes for hfi1 TID processing (5 patch series)

   - Fix potential NULL deref in siw

   - Fix memory page calculations in mlx5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (21 commits)
  RDMA/siw: Fix 64/32bit pointer inconsistency
  RDMA/siw: Fix SGL mapping issues
  RDMA/bnxt_re: Fix stack-out-of-bounds in bnxt_qplib_rcfw_send_message
  infiniband: hfi1: fix memory leaks
  infiniband: hfi1: fix a memory leak bug
  IB/mlx4: Fix memory leaks
  RDMA/cma: fix null-ptr-deref Read in cma_cleanup
  IB/mlx5: Block MR WR if UMR is not possible
  IB/mlx5: Fix MR re-registration flow to use UMR properly
  IB/mlx5: Report and handle ODP support properly
  IB/mlx5: Consolidate use_umr checks into single function
  RDMA/restrack: Rewrite PID namespace check to be reliable
  RDMA/counters: Properly implement PID checks
  IB/core: Fix NULL pointer dereference when bind QP to counter
  IB/hfi1: Drop stale TID RDMA packets that cause TIDErr
  IB/hfi1: Add additional checks when handling TID RDMA WRITE DATA packet
  IB/hfi1: Add additional checks when handling TID RDMA READ RESP packet
  IB/hfi1: Unsafe PSN checking for TID RDMA READ Resp packet
  IB/hfi1: Drop stale TID RDMA packets
  RDMA/siw: Fix potential NULL de-ref
  ...

Pull block fixes from Jens Axboe:
 "Here's a set of fixes that should go into this release. This contains:

   - Three minor fixes for NVMe.

   - Three minor tweaks for the io_uring polling logic.

   - Officially mark Song as the MD maintainer, after he's been filling
     that role sucessfully for the last 6 months or so"

* tag 'for-linus-20190823' of git://git.kernel.dk/linux-block:
  io_uring: add need_resched() check in inner poll loop
  md: update MAINTAINERS info
  io_uring: don't enter poll loop if we have CQEs pending
  nvme: Add quirk for LiteON CL1 devices running FW 22301111
  nvme: Fix cntlid validation when not using NVMEoF
  nvme-multipath: fix possible I/O hang when paths are updated
  io_uring: fix potential hang with polled IO

Merge tag 'for-5.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Revert a DM bufio change from during the 5.3 merge window now that a
   proper fix has been made to the block loopback driver.

 - Fix DM kcopyd to wakeup so failed subjobs get completed.

 - Various fixes to DM zoned target to address error handling, and other
   small tweaks (SPDX license identifiers and fix typos).

 - Fix DM integrity range locking race by tracking whether journal has
   changed.

 - Fix DM dust target to detect reads of badblocks beyond the first 512b
   sector (applicable if blocksize is larger than 512b).

 - Fix DM persistent-data issue in both the DM btree and DM
   space-map-metadata interfaces.

 - Fix out of bounds memory access with certain DM table configurations.

* tag 'for-5.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm table: fix invalid memory accesses with too high sector number
  dm space map metadata: fix missing store of apply_bops() return value
  dm btree: fix order of block initialization in btree_split_beneath
  dm raid: add missing cleanup in raid_ctr()
  dm zoned: fix potential NULL dereference in dmz_do_reclaim()
  dm dust: use dust block size for badblocklist index
  dm integrity: fix a crash due to BUG_ON in __journal_read_write()
  dm zoned: fix a few typos
  dm zoned: add SPDX license identifiers
  dm zoned: properly handle backing device failure
  dm zoned: improve error handling in i/o map code
  dm zoned: improve error handling in reclaim
  dm kcopyd: always complete failed jobs
  Revert "dm bufio: fix deadlock with loop device"

Pull xfs fixes from Darrick Wong:
 "Here are a few more bug fixes that trickled in since the last pull.
  They've survived the usual xfstests runs and merge cleanly with this
  morning's master.

  I expect there to be one more pull request tomorrow for the fix to
  that quota related inode unlock bug that we were reviewing last night,
  but it will continue to soak in the testing machine for several more
  hours.

   - Fix missing compat ioctl handling for get/setlabel

   - Fix missing ioctl pointer sanitization on s390

   - Fix a page locking deadlock in the dedupe comparison code

   - Fix inadequate locking in reflink code w.r.t. concurrent directio

   - Fix broken error detection when breaking layouts"

* tag 'xfs-5.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs/xfs: Fix return code of xfs_break_leased_layouts()
  xfs: fix reflink source file racing with directio writes
  vfs: fix page locking deadlocks when deduping files
  xfs: compat_ioctl: use compat_ptr()
  xfs: fall back to native ioctls for unhandled compat ones

Pull modules fixes from Jessica Yu:
 "Fix BUG_ON() being triggered in frob_text() due to non-page-aligned
  module sections"

* tag 'modules-for-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  modules: page-align module section allocations only for arches supporting strict module rwx
  modules: always page-align module section allocations

Pull ceph fixes from Ilya Dryomov:
 "Three important fixes tagged for stable (an indefinite hang, a crash
  on an assert and a NULL pointer dereference) plus a small series from
  Luis fixing instances of vfree() under spinlock"

* tag 'ceph-for-5.3-rc6' of git://github.com/ceph/ceph-client:
  libceph: fix PG split vs OSD (re)connect race
  ceph: don't try fill file_lock on unsuccessful GETFILELOCK reply
  ceph: clear page dirty before invalidate page
  ceph: fix buffer free while holding i_ceph_lock in fill_inode()
  ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob()
  ceph: fix buffer free while holding i_ceph_lock in __ceph_setxattr()
  libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer

Fixes improper casting between addresses and unsigned types.
Changes siw_pbl_get_buffer() function to return appropriate
dma_addr_t, and not u64.

Also fixes debug prints. Now any potentially kernel private
pointers are printed formatted as '%pK', to allow keeping that
information secret.

Fixes: d941bfe500be ("RDMA/siw: Change CQ flags from 64->32 bits")
Fixes: b0fff731 ("rdma/siw: completion queue methods")
Fixes: 8b6a361b ("rdma/siw: receive path")
Fixes: b9be6f18 ("rdma/siw: transmit path")
Fixes: f29dd55b ("rdma/siw: queue pair methods")
Fixes: 2251334d ("rdma/siw: application buffer management")
Fixes: 303ae1cd ("rdma/siw: application interface")
Fixes: 6c52fdc2 ("rdma/siw: connection management")
Fixes: a5319752 ("rdma/siw: main include file")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190822173738.26817-1-bmt@zurich.ibm.comSigned-off-by: Doug Ledford <dledford@redhat.com>

Pull drm fixes from Dave Airlie:
 "Live from the laundromat after my washing machine broke down, we have
  the 5.3-rc6 fixes. Changelog is in the tag below, but nothing too
  noteworthy in here:

  rcar-du:
   - LVDS dual-link mode fix

  mediatek:
   - of node refcount fix
   - prime buffer import fix
   - dma max seg fix

  komeda:
   - output polling fix
   - abfc format fix
   - memory-region DT fix

  amdgpu:
   - bpc display fix
   - ioctl memory leak fix
   - gfxoff fix
   - smu warnings fix

  i915:
   - HDMI mode readout fix"

* tag 'drm-fixes-2019-08-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/powerplay: silence a warning in smu_v11_0_setup_pptable
  drm/amd/display: Calculate bpc based on max_requested_bpc
  drm/amdgpu: prevent memory leaks in AMDGPU_CS ioctl
  drm/amd/amdgpu: disable MMHUB PG for navi10
  drm/amd/powerplay: remove duplicate macro smu_get_uclk_dpm_states in amdgpu_smu.h
  drm/amd/powerplay: fix variable type errors in smu_v11_0_setup_pptable
  drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible
  drm/i915: Fix HW readout for crtc_clock in HDMI mode
  drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto
  drm: rcar_lvds: Fix dual link mode operations
  drm/mediatek: set DMA max segment size
  drm/mediatek: use correct device to import PRIME buffers
  drm/omap: ensure we have a valid dma_mask
  drm/komeda: Add support for 'memory-region' DT node property
  drm/komeda: Adds internal bpp computing for arm afbc only format YU08 YU10
  drm/komeda: Initialize and enable output polling on Komeda

If the sector number is too high, dm_table_find_target() should return a
pointer to a zeroed dm_target structure (the caller should test it with
dm_target_is_valid).

However, for some table sizes, the code in dm_table_find_target() that
performs btree lookup will access out of bound memory structures.

Fix this bug by testing the sector number at the beginning of
dm_table_find_target(). Also, add an "inline" keyword to the function
dm_table_get_size() because this is a hot path.

Fixes: 512875bd ("dm: table detect io beyond device")
Cc: stable@vger.kernel.org
Reported-by: Zhang Tao <kontais@zoho.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Fixes i2c on DP with some docks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv713t2_BQ44gVV7Lqic6Vwmhq0r4FB5v-t0kD1jzFrbmQ@mail.gmail.com

While I had thought I had fixed this issue in:

commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")

It turns out that while I did fix the error messages I was seeing on my
P50 when trying to access i2c busses with the GPU in runtime suspend, I
accidentally had missed one important detail that was mentioned on the
bug report this commit was supposed to fix: that the CPU would only lock
up when trying to access i2c busses _on connected devices_ _while the
GPU is not in runtime suspend_. Whoops. That definitely explains why I
was not able to get my machine to hang with i2c bus interactions until
now, as plugging my P50 into it's dock with an HDMI monitor connected
allowed me to finally reproduce this locally.

Now that I have managed to reproduce this issue properly, it looks like
the problem is much simpler then it looks. It turns out that some
connected devices, such as MST laptop docks, will actually ACK i2c reads
even if no data was actually read:

[  275.063043] nouveau 0000:01:00.0: i2c: aux 000a: 1: 0000004c 1
[  275.063447] nouveau 0000:01:00.0: i2c: aux 000a: 00 01101000 10040000
[  275.063759] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000001
[  275.064024] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000
[  275.064285] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000
[  275.064594] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000

Because we don't handle the situation of i2c ack without any data, we
end up entering an infinite loop in nvkm_i2c_aux_i2c_xfer() since the
value of cnt always remains at 0. This finally properly explains how
this could result in a CPU hang like the ones observed in the
aforementioned commit.

So, fix this by retrying transactions if no data is written or received,
and give up and fail the transaction if we continue to not write or
receive any data after 32 retries.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

I think gcc is confused as I don't see how size could be used
unitialized, but go ahead and silence the warning.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822032527.1376-1-alexander.deucher@amd.com

Fixes for v5.3-rc6:
- dma fix for omap.
- Make output polling work on komeda.
- Fix bpp computing for AFBC formats in komeda.
- Support the memory-region property in komeda.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f1fdfe3-814e-fad1-663c-7279217fc085@linux.intel.com

Merge tag 'drm-intel-fixes-2019-08-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.3-rc6:
- fix hardware state readout for 10 bpc HDMI
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgptd114.fsf@intel.com

The outer poll loop checks for whether we need to reschedule, and
returns to userspace if we do. However, it's possible to get stuck
in the inner loop as well, if the CPU we are running on needs to
reschedule to finish the IO work.

Add the need_resched() check in the inner loop as well. This fixes
a potential hang if the kernel is configured with
CONFIG_PREEMPT_VOLUNTARY=y.
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull PCI fixes from Bjorn Helgaas:

 - Reset both NVIDIA GPU and HDA in ThinkPad P50 quirk, which was broken
   by another quirk that enabled the HDA device (Lyude Paul)

 - Fix pciebus-howto.rst documentation filename typo (Bjorn Helgaas)

* tag 'pci-v5.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Documentation PCI: Fix pciebus-howto.rst filename typo
  PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround

In commit 6096d91a ("dm space map metadata: fix occasional leak
of a metadata block on resize"), we refactor the commit logic to a new
function 'apply_bops'.  But when that logic was replaced in out() the
return value was not stored.  This may lead out() returning a wrong
value to the caller.

Fixes: 6096d91a ("dm space map metadata: fix occasional leak of a metadata block on resize")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When btree_split_beneath() splits a node to two new children, it will
allocate two blocks: left and right.  If right block's allocation
failed, the left block will be unlocked and marked dirty.  If this
happened, the left block'ss content is zero, because it wasn't
initialized with the btree struct before the attempot to allocate the
right block.  Upon return, when flushing the left block to disk, the
validator will fail when check this block.  Then a BUG_ON is raised.

Fix this by completely initializing the left block before allocating and
initializing the right block.

Fixes: 4dcb8b57 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull more fallthrough fixes from Gustavo A. R. Silva:
 "Fix fall-through warnings on arm and mips for multiple configurations"

* tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  video: fbdev: acornfb: Mark expected switch fall-through
  scsi: libsas: sas_discover: Mark expected switch fall-through
  MIPS: Octeon: Mark expected switch fall-through
  power: supply: ab8500_charger: Mark expected switch fall-through
  watchdog: wdt285: Mark expected switch fall-through
  mtd: sa1100: Mark expected switch fall-through
  drm/sun4i: tcon: Mark expected switch fall-through
  drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through
  ARM: riscpc: Mark expected switch fall-through
  dmaengine: fsldma: Mark expected switch fall-through

Merge tag 'tag-chrome-platform-fixes-for-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform fix from Benson Leung:
 "Fix a kernel crash during suspend/resume of cros_ec_ishtp"

* tag 'tag-chrome-platform-fixes-for-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_ishtp: fix crash during suspend

Pull AFS fixes from David Howells:

 - Fix a cell record leak due to the default error not being cleared.

 - Fix an oops in tracepoint due to a pointer that may contain an error.

 - Fix the ACL storage op for YFS where the wrong op definition is being
   used. By luck, this only actually affects the information appearing
   in traces.

* tag 'afs-fixes-20190822' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: use correct afs_call_type in yfs_fs_store_opaque_acl2
  afs: Fix possible oops in afs_lookup trace event
  afs: Fix leak in afs_lookup_cell_rcu()

All user level and most in-kernel applications submit WQEs
where the SG list entries are all of a single type.
iSER in particular, however, will send us WQEs with mixed SG
types: sge[0] = kernel buffer, sge[1] = PBL region.
Check and set is_kva on each SG entry individually instead of
assuming the first SGE type carries through to the last.
This fixes iSER over siw.

Fixes: b9be6f18 ("rdma/siw: transmit path")
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Tested-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190822150741.21871-1-bmt@zurich.ibm.comSigned-off-by: Doug Ledford <dledford@redhat.com>

Driver copies FW commands to the HW queue as  units of 16 bytes. Some
of the command structures are not exact multiple of 16. So while copying
the data from those structures, the stack out of bounds messages are
reported by KASAN. The following error is reported.

[ 1337.530155] ==================================================================
[ 1337.530277] BUG: KASAN: stack-out-of-bounds in bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530413] Read of size 16 at addr ffff888725477a48 by task rmmod/2785

[ 1337.530540] CPU: 5 PID: 2785 Comm: rmmod Tainted: G           OE     5.2.0-rc6+ #75
[ 1337.530541] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[ 1337.530542] Call Trace:
[ 1337.530548]  dump_stack+0x5b/0x90
[ 1337.530556]  ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530560]  print_address_description+0x65/0x22e
[ 1337.530568]  ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530575]  ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530577]  __kasan_report.cold.3+0x37/0x77
[ 1337.530581]  ? _raw_write_trylock+0x10/0xe0
[ 1337.530588]  ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530590]  kasan_report+0xe/0x20
[ 1337.530592]  memcpy+0x1f/0x50
[ 1337.530600]  bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530608]  ? bnxt_qplib_creq_irq+0xa0/0xa0 [bnxt_re]
[ 1337.530611]  ? xas_create+0x3aa/0x5f0
[ 1337.530613]  ? xas_start+0x77/0x110
[ 1337.530615]  ? xas_clear_mark+0x34/0xd0
[ 1337.530623]  bnxt_qplib_free_mrw+0x104/0x1a0 [bnxt_re]
[ 1337.530631]  ? bnxt_qplib_destroy_ah+0x110/0x110 [bnxt_re]
[ 1337.530633]  ? bit_wait_io_timeout+0xc0/0xc0
[ 1337.530641]  bnxt_re_dealloc_mw+0x2c/0x60 [bnxt_re]
[ 1337.530648]  bnxt_re_destroy_fence_mr+0x77/0x1d0 [bnxt_re]
[ 1337.530655]  bnxt_re_dealloc_pd+0x25/0x60 [bnxt_re]
[ 1337.530677]  ib_dealloc_pd_user+0xbe/0xe0 [ib_core]
[ 1337.530683]  srpt_remove_one+0x5de/0x690 [ib_srpt]
[ 1337.530689]  ? __srpt_close_all_ch+0xc0/0xc0 [ib_srpt]
[ 1337.530692]  ? xa_load+0x87/0xe0
...
[ 1337.530840]  do_syscall_64+0x6d/0x1f0
[ 1337.530843]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1337.530845] RIP: 0033:0x7ff5b389035b
[ 1337.530848] Code: 73 01 c3 48 8b 0d 2d 0b 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 2c 00 f7 d8 64 89 01 48
[ 1337.530849] RSP: 002b:00007fff83425c28 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1337.530852] RAX: ffffffffffffffda RBX: 00005596443e6750 RCX: 00007ff5b389035b
[ 1337.530853] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005596443e67b8
[ 1337.530854] RBP: 0000000000000000 R08: 00007fff83424ba1 R09: 0000000000000000
[ 1337.530856] R10: 00007ff5b3902960 R11: 0000000000000206 R12: 00007fff83425e50
[ 1337.530857] R13: 00007fff8342673c R14: 00005596443e6260 R15: 00005596443e6750

[ 1337.530885] The buggy address belongs to the page:
[ 1337.530962] page:ffffea001c951dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 1337.530964] flags: 0x57ffffc0000000()
[ 1337.530967] raw: 0057ffffc0000000 0000000000000000 ffffffff1c950101 0000000000000000
[ 1337.530970] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 1337.530970] page dumped because: kasan: bad access detected

[ 1337.530996] Memory state around the buggy address:
[ 1337.531072]  ffff888725477900: 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 f2 f2 f2
[ 1337.531180]  ffff888725477980: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
[ 1337.531288] >ffff888725477a00: 00 f2 f2 f2 f2 f2 f2 00 00 00 f2 00 00 00 00 00
[ 1337.531393]                                                  ^
[ 1337.531478]  ffff888725477a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1337.531585]  ffff888725477b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1337.531691] ==================================================================

Fix this by passing the exact size of each FW command to
bnxt_qplib_rcfw_send_message as req->cmd_size. Before sending
the command to HW, modify the req->cmd_size to number of 16 byte units.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1566468170-489-1-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Doug Ledford <dledford@redhat.com>

It seems that 'yfs_RXYFSStoreOpaqueACL2' should be use in
yfs_fs_store_opaque_acl2().

Fixes: f5e45463 ("afs: Implement YFS ACL setting")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>

The afs_lookup trace event can cause the following:

[  216.576777] BUG: kernel NULL pointer dereference, address: 000000000000023b
[  216.576803] #PF: supervisor read access in kernel mode
[  216.576813] #PF: error_code(0x0000) - not-present page
...
[  216.576913] RIP: 0010:trace_event_raw_event_afs_lookup+0x9e/0x1c0 [kafs]

If the inode from afs_do_lookup() is an error other than ENOENT, or if it
is ENOENT and afs_try_auto_mntpt() returns an error, the trace event will
try to dereference the error pointer as a valid pointer.

Use IS_ERR_OR_NULL to only pass a valid pointer for the trace, or NULL.

Ideally the trace would include the error value, but for now just avoid
the oops.

Fixes: 80548b03 ("afs: Add more tracepoints")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Fix a leak on the cell refcount in afs_lookup_cell_rcu() due to
non-clearance of the default error in the case a NULL cell name is passed
and the workstation default cell is used.

Also put a bit at the end to make sure we don't leak a cell ref if we're
going to be returning an error.

This leak results in an assertion like the following when the kafs module is
unloaded:

	AFS: Assertion failed
	2 == 1 is false
	0x2 == 0x1 is false
	------------[ cut here ]------------
	kernel BUG at fs/afs/cell.c:770!
	...
	RIP: 0010:afs_manage_cells+0x220/0x42f [kafs]
	...
	 process_one_work+0x4c2/0x82c
	 ? pool_mayday_timeout+0x1e1/0x1e1
	 ? do_raw_spin_lock+0x134/0x175
	 worker_thread+0x336/0x4a6
	 ? rescuer_thread+0x4af/0x4af
	 kthread+0x1de/0x1ee
	 ? kthread_park+0xd4/0xd4
	 ret_from_fork+0x24/0x30

Fixes: 989782dc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>

We can't rely on ->peer_features in calc_target() because it may be
called both when the OSD session is established and open and when it's
not.  ->peer_features is not valid unless the OSD session is open.  If
this happens on a PG split (pg_num increase), that could mean we don't
resend a request that should have been resent, hanging the client
indefinitely.

In userspace this was fixed by looking at require_osd_release and
get_xinfo[osd].features fields of the osdmap.  However these fields
belong to the OSD section of the osdmap, which the kernel doesn't
decode (only the client section is decoded).

Instead, let's drop this feature check.  It effectively checks for
luminous, so only pre-luminous OSDs would be affected in that on a PG
split the kernel might resend a request that should not have been
resent.  Duplicates can occur in other scenarios, so both sides should
already be prepared for them: see dup/replay logic on the OSD side and
retry_attempt check on the client side.

Cc: stable@vger.kernel.org
Fixes: 7de030d6 ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT")
Link: https://tracker.ceph.com/issues/41162Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>

When ceph_mdsc_do_request returns an error, we can't assume that the
filelock_reply pointer will be set. Only try to fetch fields out of
the r_reply_info when it returns success.

Cc: stable@vger.kernel.org
Reported-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage().
invalidatepage() clears page's private flag, if dirty flag is not
cleared, the page may cause BUG_ON failure in ceph_set_page_dirty().

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40862Signed-off-by: Erqi Chen <chenerqi@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Calling ceph_buffer_put() in fill_inode() may result in freeing the
i_xattrs.blob buffer while holding the i_ceph_lock.  This can be fixed by
postponing the call until later, when the lock is released.

The following backtrace was triggered by fstests generic/070.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
  in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4
  6 locks held by kworker/0:4/3852:
   #0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0
   #1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0
   #2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476
   #3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476
   #4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476
   #5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70
  CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ #441
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
  Workqueue: ceph-msgr ceph_con_workfn
  Call Trace:
   dump_stack+0x67/0x90
   ___might_sleep.cold+0x9f/0xb1
   vfree+0x4b/0x60
   ceph_buffer_release+0x1b/0x60
   fill_inode.isra.0+0xa9b/0xf70
   ceph_fill_trace+0x13b/0xc70
   ? dispatch+0x2eb/0x1476
   dispatch+0x320/0x1476
   ? __mutex_unlock_slowpath+0x4d/0x2a0
   ceph_con_workfn+0xc97/0x2ec0
   ? process_one_work+0x1b8/0x5f0
   process_one_work+0x244/0x5f0
   worker_thread+0x4d/0x3e0
   kthread+0x105/0x140
   ? process_one_work+0x5f0/0x5f0
   ? kthread_park+0x90/0x90
   ret_from_fork+0x3a/0x50
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in
freeing the i_xattrs.blob buffer while holding the i_ceph_lock.  This can
be fixed by having this function returning the old blob buffer and have
the callers of this function freeing it when the lock is released.

The following backtrace was triggered by fstests generic/117.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
  in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress
  4 locks held by fsstress/649:
   #0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0
   #1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60
   #2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60
   #3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60
  CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x67/0x90
   ___might_sleep.cold+0x9f/0xb1
   vfree+0x4b/0x60
   ceph_buffer_release+0x1b/0x60
   __ceph_build_xattrs_blob+0x12b/0x170
   __send_cap+0x302/0x540
   ? __lock_acquire+0x23c/0x1e40
   ? __mark_caps_flushing+0x15c/0x280
   ? _raw_spin_unlock+0x24/0x30
   ceph_check_caps+0x5f0/0xc60
   ceph_flush_dirty_caps+0x7c/0x150
   ? __ia32_sys_fdatasync+0x20/0x20
   ceph_sync_fs+0x5a/0x130
   iterate_supers+0x8f/0xf0
   ksys_sync+0x4f/0xb0
   __ia32_sys_sync+0xa/0x10
   do_syscall_64+0x50/0x1c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7fc6409ab617
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the
i_xattrs.prealloc_blob buffer while holding the i_ceph_lock.  This can be
fixed by postponing the call until later, when the lock is released.

The following backtrace was triggered by fstests generic/117.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
  in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress
  3 locks held by fsstress/650:
   #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50
   #1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0
   #2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810
  CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x67/0x90
   ___might_sleep.cold+0x9f/0xb1
   vfree+0x4b/0x60
   ceph_buffer_release+0x1b/0x60
   __ceph_setxattr+0x2b4/0x810
   __vfs_setxattr+0x66/0x80
   __vfs_setxattr_noperm+0x59/0xf0
   vfs_setxattr+0x81/0xa0
   setxattr+0x115/0x230
   ? filename_lookup+0xc9/0x140
   ? rcu_read_lock_sched_held+0x74/0x80
   ? rcu_sync_lockdep_assert+0x2e/0x60
   ? __sb_start_write+0x142/0x1a0
   ? mnt_want_write+0x20/0x50
   path_setxattr+0xba/0xd0
   __x64_sys_lsetxattr+0x24/0x30
   do_syscall_64+0x50/0x1c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7ff23514359a
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

I have been reviewing patches for md in the past few months. Mark me
as the MD maintainer, as I have effectively been filling that role.

Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drm-fixes-5.3-2019-08-21:

amdgpu:
- Fix gfxoff logic on RV
- Powerplay fixes
- Fix a possible memory leak in CS ioctl
- bpc fix for display
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822021022.3356-1-alexander.deucher@amd.com

Merge tag 'mediatek-drm-fixes-5.3' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

Mediatek memory leak drm fix for Linux 5.3
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1566264270.30493.4.camel@mtksdaap41

R-Car LVDS encoder fix
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816130115.GH5020@pendragon.ideasonboard.com

[Why]
The only place where state->max_bpc is updated on the connector is
at the start of atomic check during drm_atomic_connector_check. It
isn't updated when adding the connectors to the atomic state after
the fact. It also doesn't necessarily reflect the right value when
called in amdgpu during mode validation outside of atomic check.

This can cause the wrong bpc to be used even if the max_requested_bpc
is the correct value.

[How]
Don't rely on state->max_bpc reflecting the real bpc value and just
do the min(...) based on display info bpc and max_requested_bpc.

Fixes: 01933ba4 ("drm/amd/display: Use current connector state if NULL when checking bpc")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>