- 19 Mar, 2014 40 commits
-
-
Stephen Boyd authored
The pm8xxx-irq.c code is practically mandatory given that the pm8921-core driver will WARN about it missing and the Kconfig marks it as default y when a PM8xxx chips is enabled. The only reason the file was split out was because we planned to support other pm8xxx chips with different pm8xxx-core.c files. Now that we have DT on ARM this isn't necessary because we should be able to support all the ssbi based PM8xxx chips in one driver and one file with no data bloat. Let's move this code into the only driver that uses it right now (pm8921) so that it's always compiled when needed. In the future we can rename pm8921-core.c to something more generic. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Florian Vaussard authored
We may have an error when reading the revision register, so check for the returned value. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Florian Vaussard authored
When probing, regmap_register_patch() will bypass the cache and perform i2c writes for the given patches. It is thus unnecessary to manually set the TWL6040_REG_ACCCTL register just before, as it will be done when registering the twl6040_patch. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Opensource [Anthony Olech] authored
Add the hash define for the new variant of the DA9053 PMIC called BC. Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Opensource [Anthony Olech] authored
Add support for a new BC variant of the DA9053 PMIC. There is one difference between it and the AA, BA and BB. This patch also corrects a typing mistake in one of the BA name strings that was incorrectly typed as "ab". Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Alexander Shiyan authored
This patch moves diagnostic messages used for debugging purposes to dev_dbg(). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Michael Brunner authored
This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6 and COMe-cHL6 to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Vincent Donnefort authored
This patch adds support for Atom C2000 series (Avoton and Rangeley). And has the following options: - New addresses register. - Caching output levels (see Intel external design spec, table 48-29) - No hardware blink. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Vincent Donnefort authored
This patch allows GPIO driver to cache GPIO_LVL output registers. The aim is to support chipsets on which GPIO_LVL value can't be read for output pins. Caching output levels implies the first output values reading as 0. The driver so can't be aware of set values GPIOs by bootloader or BIOS. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Vincent Donnefort authored
This patch introduces regs and reglen pointers which allow a chipset to have register addresses differing from ICH ones. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Vincent Donnefort authored
This patch allows gpio_ich driver to be aware of non blink capable chipsets. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Vincent Donnefort authored
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Vincent Donnefort authored
All those IDs are arbitrary and so can be encapsulated into an enumeration. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Opensource [Steve Twiss] authored
Add the correct silicon variant code ID (0x5) to the driver. This new code is the 'production' variant code ID for DA9063. This patch will remove the older variant code ID which matches the pre-production silicon ID (0x3) for the DA9063 chip. There is also some small amount of correction done in this patch: it splits the revision code and correctly names it according to the hardware specification and moves the dev_info() call before the variant ID test. Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Sachin Kamat authored
Return directly to avoid redundant lines of code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Roger Tseng authored
Realtek USB card reader provides a channel to transfer command or data to flash memory cards. This driver exports host instances for mmc and memstick subsystems and handles basic works. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Sachin Kamat authored
devm_regmap_init_i2c can fail. Check for it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Sachin Kamat authored
stw481x_regmap_config is local to this file. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Sachin Kamat authored
Add this header explicitly for IS_ERR and friends. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Semen Protsenko authored
'site' variable should be initialized with 0 so that when 'site' property doesn't exist in DTB it can be handled correctly. '0' value means board site number is motherboard (see Documentation/devicetree/bindings/arm/vexpress.txt for details). Signed-off-by: Semen Protsenko <semen.protsenko@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates two dummy I2C devices for subchips in function pm800_pages_init(). Additionally this function allocates regmaps for these subchips. If any of these steps fail then these dummy I2C devices are not freed and resources leak. On pm800_pages_init() fail the driver must call pm800_pages_exit() to unregister dummy I2C devices. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Laszlo Papp authored
s/to support for/to add support for/ Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Jingoo Han authored
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
anthony.olech.opensource@diasemi.com authored
Three of the PMIC registers have some bits that are changed autonomously by the PMIC itself (some time) after being set by some component driver of the DA9052 PMIC and hence they need to be marked as volatile so that the regmap API will not cache their values. Acked-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates dummy I2C devices for MUIC and haptic with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by devm_regmap_init_i2c() and i2c_unregister_device(). If i2c_new_dummy() fails for MUIC or haptic devices, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates dummy I2C device for companion chip with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by regmap_init_i2c(). If i2c_new_dummy() fails for companion device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates dummy I2C device for companion chip and then allocates a regmap for it. If regmap_init_i2c() fails then the I2C driver (allocated with i2c_new_dummy()) is not freed and this resource leaks. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates dummy I2C devices for RTC and ADC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC or ADC devices, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
During probe the driver allocates dummy I2C devices for RTC, haptic and MUIC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Paul Gortmaker authored
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Sachin Kamat authored
Semicolon is not necessary after the while statement. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Keerthy authored
The TPS65218 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Over Temperature warning and Shut down. This patch adds support for tps65218 mfd device. At this time only the regulator functionality is made available. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Linus Walleij authored
This changes the following mechanisms in the TC3589x device tree probing path: - Use the .of_match_table in struct device_driver to match the device in the device tree. - Add matches for the proper compatible strings "toshiba,..." and all sub-variants, just as is done for the .id matches. - Move over all the allocation of platform data etc to the tc3589x_of_probe() function and follow the pattern of passing a platform data pointer back, or an error pointer on error, as found in the STMPE driver. - Match the new (proper) compatible strings for the GPIO and keypad MFD cells. - Use of_device_is_compatible() rather than just !strcmp() to discover which cells to instantiate. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Add of_compatible ("maxim,max14577-muic") to the mfd_cell for extcon driver. If entry with such compatible is present in the DTS, the extcon driver will have of_node set. This may be useful for extcon consumers and it is documented in bindings documentation. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Remove not needed max14577-private.h header inclusion in the main driver header. Remove obvious comment. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Remove unused symbol: enum max14577_irq_source. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-