- 05 May, 2012 4 commits
-
-
Daniel Vetter authored
- need_display is always true, scrap it. - don't reacquire the mutex to do nothing after having restored the gem state. Reviewed-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
... by writing (anything) to i915_error_state. This way we can simulate a bunch of gpu hangs and run the error_state capture code every time (without the need to reload the module). To make that happen we need to abandon the simple seq_file wrappers provided by the drm core. While at it put the new error_state refcounting to some good use and associated the error_state to the debugfs when opening the file. Otherwise the error_state could change while someone is reading it. This should help greatly when we finally get around to split up the giant single seq_file block that the error_state file currently is into smaller parts. v2: Actually squash all the fixes into the patch ... Reviewed-by:
-
Daniel Vetter authored
- reduce the irq disabled section, even for a debugfs file this was way too long. - always disable irqs when taking the lock. v2: Thou shalt not mistake locking for reference counting, so: - reference count the error_state to protect from concurent freeeing. This will be only really used in the next patch. Reviewed-by:
-
Daniel Vetter authored
gpu reset is a very important piece of our infrastructure. Unfortunately we only really it test by actually hanging the gpu, which often has bad side-effects for the entire system. And the gpu hang handling code is one of the rather complicated pieces of code we have, consisting of - hang detection - error capture - actual gpu reset - reset of all the gem bookkeeping - reinitialition of the entire gpu This patch adds a debugfs to selectively stopping rings by ceasing to update the hw tail pointer, which will result in the gpu no longer updating it's head pointer and eventually to the hangcheck firing. This way we can exercise the gpu hang code under controlled conditions without a dying gpu taking down the entire systems. Patch motivated by me forgetting to properly reinitialize ppgtt after a gpu reset. Usage: echo $((1 << $ringnum)) > i915_ring_stop # stops one ring echo 0xffffffff > i915_ring_stop # stops all, future-proof version then run whatever testload is desired. i915_ring_stop automatically resets after a gpu hang is detected to avoid hanging the gpu to fast and declaring it wedged. v2: Incorporate feedback from Chris Wilson. v3: Add the missing cleanup. v4: Fix up inconsistent size of ring_stop_read vs _write, noticed by Eugeni Dodonov. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
- 04 May, 2012 2 commits
-
-
Daniel Vetter authored
The drm_mode->dtd conversion used the crtc timings, whereas the dtd->drm_mod did not set these. Use the standard mode information, not the crtc timings, in both cases to make these two functions proper inverses of each another. Note that this also kills the risk that we handle interlaced timings inconsistently because the drm core uses half-frames for crtc timings, whereas we need full frames. But interlaced support is pretty decently broken anyway for sdvo encoders, so no big deal. Reviewed-by:
-
Daniel Vetter authored
Our handling of the crtc timing computation has been nicely cargo-culted with calls to drm_mode_set_crtcinfo sprinkled all over the place. But with commit f9bef081 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Apr 15 19:53:19 2012 +0200 drm/i915: don't clobber the special upscaling lvds timings and commit ca9bfa7e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Jan 28 14:49:20 2012 +0100 drm/i915: fixup interlaced vertical timings confusion, part 1 we now only set the crtc timing fields in the encoder->mode_fixup (lvds only) and in crtc->mode_fixup (for everyone else). And since commit 75c13993 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Jan 28 23:48:46 2012 +0100 drm/i915: fixup overlay checks for interlaced modes the only places we actually need the crtc timings is in the mode_set function. I guess the idea of the drm core is that every time it creates a drm mode, it also sets the timings. But afaics it never uses them, safe for the precise vblank timestamp code (but that can only run on active modes, i.e. after our mode_fixup functions have been called). The problem is that drm core always sets CRTC_INTERLACE_HALVE_V, so the timings are pretty much bogus for us anyway (at least with interlaced support). So I guess it's the drivers job that every active modes needs to have crtc timings that suits it, and with these patches we should have that. drm core doesn't seem to care about modes that just get passed around. Hence we can now safely rip out all the remaining calls to set_crtcinfo left in the driver and clean up this confusion. Reviewed-by:
-
- 03 May, 2012 34 commits
-
-
Chris Wilson authored
Every time we use the device after a period of idleness, check that the power management setup is still sane. This is to workaround a bug whereby it seems that we begin suppressing power management interrupts, preventing SandyBridge+ from going into turbo mode. This patch does have a side-effect. It removes the mark-busy for just moving the cursor - we don't want to increase the render clock just for the sprite, though we may want to bump the display frequency. I'd argue that we do not, and certainly don't want to take the struct_mutex here due to the large latencies that introduces. References: https://bugs.freedesktop.org/show_bug.cgi?id=44006Signed-off-by:
-
Paulo Zanoni authored
They require an AVI InfoFrame with a proper Pixel Repetition field. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Paulo Zanoni authored
To keep the consistency with the other fields. Signed-off-by:
-
Chris Wilson authored
When initialising the PLL registers we may have to clear existing state from the BIOS - that is the PLL may already be enabled. So we need to disable it, wait for the clocks to settle and then rewrite it. The issue came to light when Ben tested commit 88ca4bb7974277793e602d88739d4e8f56b89e64 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Apr 20 17:11:53 2012 +0100 drm/i915: manage PCH PLLs separately from pipes and found that booting into a VGA monitor was no longer working. Closer inspection suggests that it was a pre-existing bug now being hit by the rearranged code. Perhaps Ben was not even the first person to stumble upon this bug, https://bugs.freedesktop.org/show_bug.cgi?id=37029. Signed-off-by:Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Daniel Vetter authored
Unfortunately it looks like further vlv patches are still stalled due to fried hw, and too many people are a bit annoyed about the unused function warning. So let's just rip it out, we can easily put it back in again. Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by:
-
Ben Widawsky authored
The new wait_rendering ioctl also needs to check for an oustanding lazy request, and we already duplicate that logic at three places. So extract it. While at it, also extract the code to check the gpu wedging state to improve code flow. v2: Don't use seqno as an outparam (Chris) v3 by danvet: Kill stale comment and pimp commit message Signed-off-by:
-
Daniel Vetter authored
Because this is the place where we actually use the results of them. Acked-by:
-
Daniel Vetter authored
Two things: - ring->virtual start is an __iomem pointer, treat it accordingly. - dev_priv->status_page.page_addr is now always a cpu addr, no pointer casting needed for that. Take the opportunity to remove the unnecessary drm indirection when setting up the ringbuffer iomapping. v2: Add a compiler barrier before reading the hw status page. Acked-by:
-
Daniel Vetter authored
To get the fun stuff out of the way, the legacy hws is allocated by userspace when the gpu needs a gfx hws. And there's no reference-counting going on, so userspace can simply screw everyone over. At least it's not as horrible as i810, where the ringbuffer is allocated by userspace ... We can't fix this disaster, but we can at least tidy up the code a bit to make things clearer: - Drop the drm ioremap indirection. - Add a new new read_legacy_status_page to paper over the differences between the legacy gfx hws and the physical hws shared with the new ringbuffer code. - Add a pointer in dev_priv->dri1 for the cpu addresses - that one is an iomem remapping as opposed to all other hw status pages. This is just prep work to make sparse happy. Acked-by:
-
Daniel Vetter authored
We kzalloc dev_priv, and we never use hws_map in intel_ringbuffer.c. Reviewed-by:
-
Daniel Vetter authored
They're now in intel_pm.c, so group them a bit better. Acked-by:
-
Daniel Vetter authored
We now have a nice home for power management code, so let's use it! v2: Resolve conflict agains "Only enable IPS polling for gen5" Acked-by:
-
Daniel Vetter authored
Unfortunately there has been dri1 userspace that used gem to manage the gtt and hence also needed cliprects in the execbuf ioctl. So we can't ever remove that code without breaking the ioctl abi. But at least we can disable it on gen5+, because these horrible versions of mesa have not supported these chips. Acked-by:
-
Daniel Vetter authored
Wohoo! Now we only need to move all the gem/kms stuff that accidentally landed in i915_dma.c out of it, and this will be our legacy dri1 grave-yard. Reviewed-by:
-
Daniel Vetter authored
... and hide it in i915_dma.c. This way all the legacy stuff dealing with READ_BREADCRUMB and LP_RING and friends is in i915_dma.c. v2: Rebase on top of Chris Wilson's rework irq handling code. Reviewed-by:
-
Daniel Vetter authored
Let's just get this out of the way. v2: Rebase against ENODEV changes. Reviewed-by:
-
Daniel Vetter authored
We never supported dri1 on gen5+. VLV never had that code, so no need to remove it. Reviewed-by:
-
Daniel Vetter authored
This is a pretty racy way to close these races, and we have much better means to cope with these races meanwhile: For non-broken userspace we correctly wait for any outstanding rendering, for broken userspace the hangcheck will save the day. Reviewed-by:
-
Daniel Vetter authored
The LP refers to 'low priority' as opposed to the high priority ring on gen2/3. So lets constrain its use to the code of that era. Unfortunately we can't yet completely remove the associated macros from common headers and shove them into i915_dma.c to the other dri1 legacy support code, a few cleanups are still missing for that. Reviewed-by:
-
Daniel Vetter authored
Assigned in setparam, used never. I didn't bother to dig through the archives to figure out what this was supposed to do. Acked-by:
-
Daniel Vetter authored
Even the horrible gen3 XvMC code has learned to do this right by the time xf86-video-intel releases learned to do kernel modesetting. So we can just disallow this. Acked-by:
-
Daniel Vetter authored
... and shove allow_batchbuffer in there. More dragons will follow suit. There's the curious case that we allow this for KMS ... Acked-by:
-
Daniel Vetter authored
i915_dma.c contains most of the old dri1 horror-show, so move the remaining bits there, too. The code has been removed and the only thing left are some stubs to ensure that userspace doesn't try to use this stuff. vblank_pipe_set only returns 0 without any side-effects, so we can even stub it out with the canonical drm_noop. v2: Rebase against ENODEV changes. Acked-by:
-
Chris Wilson authored
vblank_pipe was intended to be used for tracking DRI1 state. However, the vblank_pipe reported to DRI1 is fixed to umask both pipes, and the dev_priv->vblank_pipe unused and superfluous. Signed-off-by:
-
Chris Wilson authored
On SandyBridge IPS was entirely implemented in hardware and not reliant on the driver monitoring power consumption and feeding back desired run states, so the hardware is able to adapt quicker and more flexibly. Which is a huge relief for us as we no longer have to carry empirically derived magic algorithms. Yet despite the advance in technology, the driver was still doing its IPS polling on all machines. Restrict it to the only supported hardware, Clarkdale/Arrandale. Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Ben Widawsky authored
It turns out throttle had an almost identical bit of code to do the wait. Now we can call the new helper directly. This is just a bonus, and not needed for the overall series. v2: remove irq_get/put which is now in __wait_seqno (Ben) Signed-off-by:
-
Ben Widawsky authored
It's about to go away anyway. Just here to help bisection. Signed-off-by:
-
Ben Widawsky authored
i915_wait_request is actually a fairly large function encapsulating quite a few different operations. Because being able to wait on seqnos in various conditions is useful, extracting that bit of code to a helper function seems useful v2: pull the irq_get/put as well (Ben) Signed-off-by:
-
Ben Widawsky authored
The only time irq_get should fail is during unload or suspend. Both of these points should try to quiesce the GPU before disabling interrupts and so the atomic polling should never occur. This was recommended by Chris Wilson as a way of reducing added complexity to the polled wait which I introduced in an RFC patch. 09:57 < ickle_> it's only there as a fudge for waiting after irqs after uninstalled during s&r, we aren't actually meant to hit it 09:57 < ickle_> so maybe we should just kill the code there and fix the breakage v2: return -ENODEV instead of -EBUSY when irq_get fails Signed-off-by:
-
Ben Widawsky authored
The waiting_seqno is not terribly useful, and as such we can remove it so that we'll be able to extract lockless code. v2: Keep the information for error_state (Chris) Check if ring is initialized in hangcheck (Chris) Capture the waiting ring (Chris) Signed-off-by:
-
Ben Widawsky authored
This extra bit of interrupt enabling code doesn't belong in the wait seqno function. If anything we should pull it out to a helper so the throttle code can also use it. The history is a bit vague, but I am going to attempt to just dump it, unless someone can argue otherwise. Removing this allows for a shared lock free wait seqno function. To keep tabs on this issue though, the IER value is stored on error capture (recommended by Chris Wilson) v2: fixed typo EIR->IER (Ben) Fix some white space (Ben) Move IER capture to globally instead of per ring (Ben) Signed-off-by:
-
Ben Widawsky authored
This originates from a hack by me to quickly fix a bug in an earlier patch where we needed control over whether or not waiting on a seqno actually did any retire list processing. Since the two operations aren't clearly related, we should pull the parameter out of the wait function, and make the caller responsible for retiring if the action is desired. The only function call site which did not get an explicit retire_request call (on purpose) is i915_gem_inactive_shrink(). That code was already calling retire_request a second time. v2: don't modify any behavior excepit i915_gem_inactive_shrink(Daniel) Signed-off-by:
-
Daniel Vetter authored
I've missed this one. v2: Chris Wilson noticed another register. v3: Color choice improvements. Reviewed-by:
-
