Add ICH8 support to the iTCO_wdt driver.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>

Update Kconfig for the w83697hf/hg watchdog driver.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Change the autodetect code so that it is more generic.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 16 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Add copyright notice for Samuel Tardieu also.

This is the last patch in this series. 

The original description for Samuel's driver was:
driver for the Winbond W83697HF/W83697HG watchdog timer

The Winbond SuperIO W83697HF/HG includes a watchdog that can count from
1 to 255 seconds (or minutes). This drivers allows the seconds mode to
be used. It exposes a standard /dev/watchdog interface. This chip is
currently being used on some motherboards designed by VIA.

By default, the module looks for a chip at I/O port 0x2e. The chip can
be configured to be at 0x4e on some motherboards, the address can be
chosen using the wdt_io module parameter. Using 0 will try to autodetect
the address.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 15 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Clean-up initialization code - part 2: 
   * the line reading "set second mode & disable keyboard ..."
     is plain wrong, the register being manipulated (CRF4) is
     the counter itself, not the control byte (CRF3) -- looks
     like it has been copied from another driver.
   * I think garbage is being written in CRF3 (the control word)
     as the timeout value is being stored in this register (such
     as 60 for 60 seconds).
   * We only want to set pin 119 to WDTO# mode and leave the rest
     of CR29 like it is.
   * Set count mode to seconds and not minutes.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 14 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Clean-up initialization code (part 1: remove
   w83697hf_select_wd_register() and
   w83697hf_unselect_wd_register() functions).
 - Make sure that the watchdog device is stopped
   as soon as we found it.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 13 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Remove wdt_ctrl (it has been replaced with the
   w83697hf_write_timeout() function) and redo/clean-up
   the start/stop/ping code.
 - Make sure that the watchdog is enabled or disabled
   When starting or stoping the device (with a call
   to w83697hf_set_reg(0x30, ?); ).
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 12 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Add w83697hf_write_timeout() to set the
   watchdog's timeout value.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 11 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Add w83697hf_select_wdt() and w83697hf_deselect_wdt()
   so that the start/stop/ping code can directly talk to
   the watchdog.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 10 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - check whether the device is really present
   (we *can* probe for the device now).
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 9 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - add w83697hf_get_reg() and w83697hf_set_reg()
   functions.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 8 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - add w83697hf_lock function to leave the
   chipsets extended function mode.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 7 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - add w83697hf_unlock function to enter the
   chipsets extended function mode.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 6 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - The driver works for both the w83697hf
   and the w83697hg chipset's.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 5 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Rename the Extended Function Registers to the names
   used in the data-sheet.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 4 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - limits the watchdog timeout to 1-63 while this
   device accepts 1-255.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 3 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Fix identation.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 2 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - wdt_io is 2 bytes long. We should do a
   request_region for 2 bytes instead of 1.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is patch 1 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - the note concerning tyan motherboards has been copied from
   another driver, This doesn't apply here.
 - the comments concerning CRF6 are wrong as CRF3 is manipulated
   and CRF6 is never read nor written.
 - the comments concerning CRF5 are wrong as CRF4 is manipulated
   and CRF5 is never read nor written.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results

The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands.
ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

fixed some more trailing spaces.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add io spinlocks to prevent possible race
conditions between start and stop operations
that are issued from different child processes
where the master process opened /dev/watchdog.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

* fix typo's according to spellings checker
* Fix some leading and trailing spaces
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

New watchdog driver for the Winbond W83697HF chipset.
Signed-off-by: Marcus Junker <junker@anduras.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

* Added io spinlocking
* Deleted WATCHDOG_MINOR (it's in the miscdevice include
* Changed timer_enabled to use set_bit functions
* WDIOC_GETSUPPORT should return -EFAULT or 0
* timeout should be correct before we initialize the watchdog
* we should initialize the watchdog before we give access
  to userspace
* Third parameter of module_param is not the default or
  initial value
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Remove trailing whitespace.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

New watchdog driver for the Winbond SMsC37B787 chipset.
Signed-off-by: Sven Anders <anders@anduras.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Retry internal operation after unit check instead of aborting them.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add timeout handler for common-I/O-layer-internal I/O operations.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use page_to_phys and pfn_to_page to avoid open-coded mem_map usage.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Size zones and holes in an architecture independent manner for s390.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

The include of linux/smp.h needs to be done before the #if that
checks for the compiler version. Seems like fallout from the
inline assembly cleanup patch vs. the directed yield patch.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Fix a race condition during AP device registration and unregistration.
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

While the machine owns us an interrupt in these cases (and we should get
one), reality isn't always like that...
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix new restore_sigregs function. It copies the user space copy of the
old psw without correcting the psw.mask and the psw.addr high order bit.
While we are at it, simplify save_sigregs a bit.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

* 'for-2.6.19' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Document bi_sector and sector_t
  [PATCH] helper function for retrieving scsi_cmd given host based block layer tag