- 21 Jun, 2006 40 commits
-
-
Greg Kroah-Hartman authored
Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
This moves the usb class devices that control the usbfs nodes to show up in the proper place in the larger device tree. No userspace changes is needed, this is compatible due to the symlinks generated by the driver core. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: -
Greg Kroah-Hartman authored
This will allow for us to give endpoints a major/minor to create a "usbfs2-like" way to access endpoints directly from userspace in an easier manner than the current usbfs provides us. Signed-off-by: -
Greg Kroah-Hartman authored
Instead of a kobject, will make things easier in the future (don't know what I was thinking when I did this originally...) Signed-off-by: -
Greg Kroah-Hartman authored
This makes it easier to modify in the future without touching anything else. Signed-off-by: -
David Brownell authored
Move <linux/usb_input.h> to <linux/usb/input.h> and remove some redundant includes. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
This moves header files for controller-specific platform data from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing some clutter. Signed-off-by:
-
David Brownell authored
This moves <linux/usb_cdc.h> to <linux/usb/cdc.h> to reduce some of the clutter of usb header files. Signed-off-by:
-
David Brownell authored
This removes extraneous whitespace from the Ethernet/RNDIS gadget driver. It's all space-at-EOL, spaces-before-tabs, or tabs-then-spaces. Signed-off-by:
-
Alan Stern authored
Here is a patch (as720) adding an unusual_devs entry for the Nokia N80 mobile phone. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Some usbserial functions returns -EINVAL if the port doesn't exist or if it's not opened. However, the right error code for such situations is -ENODEV. Signed-off-by:
Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Milan Svoboda authored
This patch adds IXP465 into the list of known devices and adds IXP425 and IXP465 to the list of devices that have cfr. This is not described in the hardware documentation, but without it driver won't work. Workaround (#if 1) that seemed to get rid of lost status irqs is disabled for IXP4XX as it caused freezes during testing of control messages. No lost irqs are visible on IXP4XX. Driver survived tests running over night without any visible problems. Signed-off-by:
Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by:
-
Milan Svoboda authored
This patch fixes compile errors when pxa2xx_udc is to be compiled for ixp4xx platform. Signed-off-by:
-
Milan Svoboda authored
This patch removes limitation which prevents use of drivers that support speeds different that full speed. Signed-off-by:
-
Franck Bui-Huu authored
As pointed out by David Brownell, we know that IRQs are never blocked when calling gs_close function. So the save/restore IRQ flags are pointless. Signed-off-by:
Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by:
-
Franck Bui-Huu authored
When closing the device, the driver acquires/release twice the port lock before/after waiting for the data to be completely sent. Therefore it will dead lock. This patch fixes it and also uses the generic scheduler services for waiting for an event. Signed-off-by:
-
Frank Gevaerts authored
If either the driver's open() method or try_module_get() fails, we need to set 'tty->driver_data' and 'port->tty' to NULL in serial_open(), otherwise we'll get an OOPS in usb_device_disconnect() when the device is disconnected. Signed-off-by:
Frank Gevaerts <frank.gevaerts@fks.be> Acked-by:
-
Matt Reimer authored
Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Oliver Bock authored
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by:
Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by:
-
Pete Zaitcev authored
Fix up the documentation. Apparently, I left unedited copy-paste results in examples. Also, Alan helped me to improve the most confusing parts. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Pete Zaitcev authored
Implement the "error" event in usbmon. Signed-off-by:
-
Pete Zaitcev authored
This update contains one bug fix: some lines can come out truncated, because of the safety cutoff. This happened because I forgot to update the size when status packets began to be printed. The rest is: - Comments updates - Allow snooping with pkmap on x86_64, which is cache-coherent - Enlarge event buffers (certainly we can have a couple of pages) - Add event counter First touch upon usbmon for 2.6.18. Signed-off-by:
-
Pete Zaitcev authored
Al Borchers suggested to do this in his review of my previous patch. I guess that I skipped this initially because of my visceral dislike of sizeof(data). But in this case it seems well localized. Signed-off-by:
-
Timothy Sipples authored
Adds vendor & product IDs to drivers/usb/serial/airprime.c for Kyocera Wireless KPC650/Passport EV-DO/1xRTT PC Cards. Signed-off-by:
Timothy Sipples <Timothy.Sipples@us.ibm.com> Signed-off-by:
-
Alan Stern authored
This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by:
-
Alan Stern authored
This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by:
-
David Brownell authored
This patch (as705) contains a small set of updates for uhci-hcd written mostly by Dave Brownell: * Root hub suspend messages come out labeled as root hub messages; PCI messages should only come out when the pci device suspends. * Rename the reset() method to better match its init() role * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub suspend/resume errors. * When an URB fails, associate the message with the usb device not the host controller (it still hides endpoint and direction) From: David Brownell <david-b@pacbell.net> Signed-off-by: -
Alan Stern authored
This patch (as704) adds an unusual_devs entry for the Nikon DSC D70s, which uses a different Product ID from the D70. It also moves the entry for the DSC E2000 up in the list, to preserve the numerical ordering. Signed-off-by:
-
Rene Rebe authored
This adds the Apple MacBook product IDs for the Fn translation to the usbhid. Signed-off-by:
Rene Rebe <rene@exactcode.de> Signed-off-by:
-
Ralf Baechle authored
Including ehci-au1xxx.c on a non-Au1200 Alchemy only to have it throw an error is stupid. From: Ralf Baechle <ralf@linux-mips.org> Acked-by:
-
Chris Lund authored
While an Edgeport is allocating individual port structures, if kmalloc returns NULL, the serial structure is freed and -ENOMEM, but the ports allocated before the failure are not freed. This patch addresses that condition. Signed-off-by:
Christopher Lund <docmax@gmail.com> Signed-off-by:
-
Matthias Urlichs authored
This patch extends the "option" driver with a few more devices, some of which are actually connected to USB the "right" way -- as opposed to doing it via PCMCIA and OHCI. Signed-Off-By:
Matthias Urlichs <smurf@debian.org> Signed-off-by:
-
Philippe Retornaz authored
See http://bugzilla.kernel.org/show_bug.cgi?id=6617. This function dereference a __user pointer. Signed-off-by:
Philippe Retornaz <couriousous@mandriva.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Alan Stern authored
This patch (as703) improves the error handling when a Set-Configuration request fails. The old interfaces are all unregistered before the request is sent, and if the request fails then we don't know what config the device is using. So it makes no sense to leave actconfig pointing to the old configuration with its invalid interfaces. Signed-off-by:
-
Alan Stern authored
This patch (as702) makes usbhid use the new usb_reset_composite_device API. Now HID interfaces can coexist with other interfaces on the same device, and a reset can safely be requested by any of the drivers. Signed-off-by:
-
Alan Stern authored
This patch (as701) modifies usb-storage to take advantage of the new usb_reset_composite_device() API. Now we will be able to safely request port resets even if other drivers are bound to a mass-storage device. Signed-off-by:
-
Alan Stern authored
This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by:
-
Alan Stern authored
This patch (as699) adds usb_reset_composite_device(), a routine for sending a USB port reset to a device with multiple interfaces owned by different drivers. Drivers are notified about impending and completed resets through two new methods in the usb_driver structure. The patch modifieds the usbfs ioctl code to make it use the new routine instead of usb_reset_device(). Follow-up patches will modify the hub, usb-storage, and usbhid drivers so they can utilize this new API. Signed-off-by:
-
David Brownell authored
Earlier work splitting the "usbnet" driver out into a core plus driver modules was missing a blacklist entry for the Olympus R-1000; it must not use the CDC Ethernet driver, only the "zaurus" support works with it. Signed-off-by:
-
Eric Sesterhenn authored
From: Eric Sesterhenn <snakebyte@gmx.de> This fixes coverity Bug #390. With the following code ret = ep->branch = balance(isp116x, ep->period, ep->load); if (ret < 0) goto fail; the problem is that ret and balance are of the type int, and ep->branch is u16. so the int balance() returns gets reduced to u16 and then converted to an int again, which removes the sign. Maybe the following little c program can explain it better:
-
