- 23 Jun, 2019 2 commits
-
-
Fenghua Yu authored
umwait or tpause allows the processor to enter a light-weight power/performance optimized state (C0.1 state) or an improved power/performance optimized state (C0.2 state) for a period specified by the instruction or until the system time limit or until a store to the monitored address range in umwait. IA32_UMWAIT_CONTROL MSR register allows the OS to enable/disable C0.2 on the processor and to set the maximum time the processor can reside in C0.1 or C0.2. By default C0.2 is enabled so the user wait instructions can enter the C0.2 state to save more power with slower wakeup time. Andy Lutomirski proposed to set the maximum umwait time to 100000 cycles by default. A quote from Andy: "What I want to avoid is the case where it works dramatically differently on NO_HZ_FULL systems as compared to everything else. Also, UMWAIT may behave a bit differently if the max timeout is hit, and I'd like that path to get exercised widely by making it happen even on default configs." A sysfs interface to adjust the time and the C0.2 enablement is provided in a follow up change. [ tglx: Renamed MSR_IA32_UMWAIT_CONTROL_MAX_TIME to MSR_IA32_UMWAIT_CONTROL_TIME_MASK because the constant is used as mask throughout the code. Massaged comments and changelog ] Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Ashok Raj <ashok.raj@intel.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: "Borislav Petkov" <bp@alien8.de> Cc: "H Peter Anvin" <hpa@zytor.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Link: https://lkml.kernel.org/r/1560994438-235698-3-git-send-email-fenghua.yu@intel.com
-
Fenghua Yu authored
umonitor, umwait, and tpause are a set of user wait instructions. umonitor arms address monitoring hardware using an address. The address range is determined by using CPUID.0x5. A store to an address within the specified address range triggers the monitoring hardware to wake up the processor waiting in umwait. umwait instructs the processor to enter an implementation-dependent optimized state while monitoring a range of addresses. The optimized state may be either a light-weight power/performance optimized state (C0.1 state) or an improved power/performance optimized state (C0.2 state). tpause instructs the processor to enter an implementation-dependent optimized state C0.1 or C0.2 state and wake up when time-stamp counter reaches specified timeout. The three instructions may be executed at any privilege level. The instructions provide power saving method while waiting in user space. Additionally, they can allow a sibling hyperthread to make faster progress while this thread is waiting. One example of an application usage of umwait is when waiting for input data from another application, such as a user level multi-threaded packet processing engine. Availability of the user wait instructions is indicated by the presence of the CPUID feature flag WAITPKG CPUID.0x07.0x0:ECX[5]. Detailed information on the instructions and CPUID feature WAITPKG flag can be found in the latest Intel Architecture Instruction Set Extensions and Future Features Programming Reference and Intel 64 and IA-32 Architectures Software Developer's Manual. Signed-off-by:
-
- 22 Jun, 2019 22 commits
-
-
Konstantin Khlebnikov authored
Since commit 7d5905dc ("x86 / CPU: Always show current CPU frequency in /proc/cpuinfo") open and read of /proc/cpuinfo sends IPI to all CPUs. Many applications read /proc/cpuinfo at the start for trivial reasons like counting cores or detecting cpu features. While sensitive workloads like DPDK network polling don't like any interrupts. Integrates this feature with cpu isolation and do not send IPIs to CPUs without housekeeping flag HK_FLAG_MISC (set by nohz_full). Code that requests cpu frequency like show_cpuinfo() falls back to the last frequency set by the cpufreq driver if this method returns 0. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Tony W Wang-oc authored
Same as Intel, Zhaoxin MP CPUs support C3 share cache and on all recent Zhaoxin platforms ARB_DISABLE is a nop. So set related flags correctly in the same way as Intel does. Signed-off-by:
Tony W Wang-oc <TonyWWang-oc@zhaoxin.com> Signed-off-by:
-
Tony W Wang-oc authored
Zhaoxin CPUs have NONSTOP TSC feature, so enable the ACPI driver support for it. Signed-off-by:
-
Tony W Wang-oc authored
Add x86 architecture support for new Zhaoxin processors. Carve out initialization code needed by Zhaoxin processors into a separate compilation unit. To identify Zhaoxin CPU, add a new vendor type X86_VENDOR_ZHAOXIN for system recognition. Signed-off-by:
-
Andy Shevchenko authored
Split Tremont based Atoms from the rest to keep logical grouping. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
Explain how the GS/FS based addressing can be utilized in user space applications along with the differences between the generic prctl() based GS/FS base control and the FSGSBASE version available on newer CPUs. Originally-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Andi Kleen authored
The kernel needs to explicitly enable FSGSBASE. So, the application needs to know if it can safely use these instructions. Just looking at the CPUID bit is not enough because it may be running in a kernel that does not enable the instructions. One way for the application would be to just try and catch the SIGILL. But that is difficult to do in libraries which may not want to overwrite the signal handlers of the main application. Enumerate the enabled FSGSBASE capability in bit 1 of AT_HWCAP2 in the ELF aux vector. AT_HWCAP2 is already used by PPC for similar purposes. The application can access it open coded or by using the getauxval() function in newer versions of glibc. [ tglx: Massaged changelog ] Signed-off-by:
Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by:
-
Andy Lutomirski authored
Now that FSGSBASE is fully supported, remove unsafe_fsgsbase, enable FSGSBASE by default, and add nofsgsbase to disable it. Signed-off-by:
-
Chang S. Bae authored
This validates that GS and GSBASE are independently preserved in ptracer commands. Suggested-by:
-
Andy Lutomirski authored
This validates that GS and GSBASE are independently preserved across context switches. [ chang: Use FSGSBASE instructions directly instead of .byte ] Signed-off-by:
-
Chang S. Bae authored
On a FSGSBASE system, the way to handle GSBASE in the paranoid path is different from the existing SWAPGS-based entry/exit path handling. Document the reason and what has to be done for FSGSBASE enabled systems. [ tglx: Massaged doc and changelog ] Signed-off-by:
-
Chang S. Bae authored
Without FSGSBASE, user space cannot change GSBASE other than through a PRCTL. The kernel enforces that the user space GSBASE value is postive as negative values are used for detecting the kernel space GSBASE value in the paranoid entry code. If FSGSBASE is enabled, user space can set arbitrary GSBASE values without kernel intervention, including negative ones, which breaks the paranoid entry assumptions. To avoid this, paranoid entry needs to unconditionally save the current GSBASE value independent of the interrupted context, retrieve and write the kernel GSBASE and unconditionally restore the saved value on exit. The restore happens either in paranoid_exit or in the special exit path of the NMI low level code. All other entry code pathes which use unconditional SWAPGS are not affected as they do not depend on the actual content. [ tglx: Massaged changelogs and comments ] Suggested-by:
H. Peter Anvin <hpa@zytor.com> Suggested-by:
-
Chang S. Bae authored
GSBASE is used to find per-CPU data in the kernel. But when GSBASE is unknown, the per-CPU base can be found from the per_cpu_offset table with a CPU NR. The CPU NR is extracted from the limit field of the CPUNODE entry in GDT, or by the RDPID instruction. This is a prerequisite for using FSGSBASE in the low level entry code. Also, add the GAS-compatible RDPID macro as binutils 2.21 do not support it. Support is added in version 2.27. [ tglx: Massaged changelog ] Suggested-by:
-
Chang S. Bae authored
When FSGSBASE is enabled, the GSBASE handling in paranoid entry will need to retrieve the kernel GSBASE which requires that the kernel page table is active. As the CR3 switch to the kernel page tables (PTI is active) does not depend on kernel GSBASE, move the CR3 switch in front of the GSBASE handling. Comment the EBX content while at it. No functional change. [ tglx: Rewrote changelog and comments ] Signed-off-by:
-
Chang S. Bae authored
When FSGSBASE is enabled, copying threads and reading fsbase and gsbase using ptrace must read the actual values. When copying a thread, use save_fsgs() and copy the saved values. For ptrace, the bases must be read from memory regardless of the selector if FSGSBASE is enabled. [ tglx: Invoke __rdgsbase_inactive() with interrupts disabled ] [ luto: Massage changelog ] Suggested-by:
-
Andy Lutomirski authored
With the new FSGSBASE instructions, FS and GSABSE can be efficiently read and writen in __switch_to(). Use that capability to preserve the full state. This will enable user code to do whatever it wants with the new instructions without any kernel-induced gotchas. (There can still be architectural gotchas: movl %gs,%eax; movl %eax,%gs may change GSBASE if WRGSBASE was used, but users are expected to read the CPU manual before doing things like that.) This is a considerable speedup. It seems to save about 100 cycles per context switch compared to the baseline 4.6-rc1 behavior on a Skylake laptop. [ chang: 5~10% performance improvements were seen with a context switch benchmark that ran threads with different FS/GSBASE values (to the baseline 4.16). Minor edit on the changelog. ] [ tglx: Masaage changelog ] Signed-off-by:
-
Chang S. Bae authored
Add cpu feature conditional FSGSBASE access to the relevant helper functions. That allows to accelerate certain FS/GS base operations in subsequent changes. Note, that while possible, the user space entry/exit GSBASE operations are not going to use the new FSGSBASE instructions. The reason is that it would require additional storage for the user space value which adds more complexity to the low level code and experiments have shown marginal benefit. This may be revisited later but for now the SWAPGS based handling in the entry code is preserved except for the paranoid entry/exit code. To preserve the SWAPGS entry mechanism introduce __[rd|wr]gsbase_inactive() helpers. Note, for Xen PV, paravirt hooks can be added later as they might allow a very efficient but different implementation. [ tglx: Massaged changelog ] Signed-off-by:
-
Andi Kleen authored
[ luto: Rename the variables from FS and GS to FSBASE and GSBASE and make <asm/fsgsbase.h> safe to include on 32-bit kernels. ] Signed-off-by:
-
Chang S. Bae authored
It helps to use some new instructions directly in assembly code. Suggested-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Linux Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Link: https://lkml.kernel.org/r/1557309753-24073-5-git-send-email-chang.seok.bae@intel.com
-
Andy Lutomirski authored
This is temporary. It will allow the next few patches to be tested incrementally. Setting unsafe_fsgsbase is a root hole. Don't do it. Signed-off-by:
-
Chang S. Bae authored
The test validates that the selector is not changed when a ptracer writes the ptracee's GSBASE. Suggested-by:
-
Chang S. Bae authored
When a ptracer writes a ptracee's FS/GSBASE with a different value, the selector is also cleared. This behavior is not correct as the selector should be preserved. Update only the base value and leave the selector intact. To simplify the code further remove the conditional checking for the same value as this code is not performance critical. The only recognizable downside of this change is when the selector is already nonzero on write. The base will be reloaded according to the selector. But the case is highly unexpected in real usages. [ tglx: Massage changelog ] Suggested-by:
-
- 20 Jun, 2019 3 commits
-
-
Fenghua Yu authored
AVX512 BFLOAT16 instructions support 16-bit BFLOAT16 floating-point format (BF16) for deep learning optimization. BF16 is a short version of 32-bit single-precision floating-point format (FP32) and has several advantages over 16-bit half-precision floating-point format (FP16). BF16 keeps FP32 accumulation after multiplication without loss of precision, offers more than enough range for deep learning training tasks, and doesn't need to handle hardware exception. AVX512 BFLOAT16 instructions are enumerated in CPUID.7.1:EAX[bit 5] AVX512_BF16. CPUID.7.1:EAX contains only feature bits. Reuse the currently empty word 12 as a pure features word to hold the feature bits including AVX512_BF16. Detailed information of the CPUID bit and AVX512 BFLOAT16 instructions can be found in the latest Intel Architecture Instruction Set Extensions and Future Features Programming Reference. [ bp: Check CPUID(7) subleaf validity before accessing subleaf 1. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "Chang S. Bae" <chang.seok.bae@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <namit@vmware.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: Robert Hoo <robert.hu@linux.intel.com> Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: x86 <x86@kernel.org> Link: https://lkml.kernel.org/r/1560794416-217638-3-git-send-email-fenghua.yu@intel.com
-
Fenghua Yu authored
It's a waste for the four X86_FEATURE_CQM_* feature bits to occupy two whole feature bits words. To better utilize feature words, re-define word 11 to host scattered features and move the four X86_FEATURE_CQM_* features into Linux defined word 11. More scattered features can be added in word 11 in the future. Rename leaf 11 in cpuid_leafs to CPUID_LNX_4 to reflect it's a Linux-defined leaf. Rename leaf 12 as CPUID_DUMMY which will be replaced by a meaningful name in the next patch when CPUID.7.1:EAX occupies world 12. Maximum number of RMID and cache occupancy scale are retrieved from CPUID.0xf.1 after scattered CQM features are enumerated. Carve out the code into a separate function. KVM doesn't support resctrl now. So it's safe to move the X86_FEATURE_CQM_* features to scattered features word 11 for KVM. Signed-off-by:
-
Borislav Petkov authored
... into a separate function for better readability. Split out from a patch from Fenghua Yu <fenghua.yu@intel.com> to keep the mechanical, sole code movement separate for easy review. No functional changes. Signed-off-by:
-
- 19 Jun, 2019 1 commit
-
-
Qian Cai authored
cpuinfo_x86.x86_model is an unsigned type, so comparing against zero will generate a compilation warning: arch/x86/kernel/cpu/cacheinfo.c: In function 'cacheinfo_amd_init_llc_id': arch/x86/kernel/cpu/cacheinfo.c:662:19: warning: comparison is always true \ due to limited range of data type [-Wtype-limits] Remove the unnecessary lower bound check. [ bp: Massage. ] Fixes: 68091ee7 ("x86/CPU/AMD: Calculate last level cache ID from number of sharing threads") Signed-off-by:Qian Cai <cai@lca.pw> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1560954773-11967-1-git-send-email-cai@lca.pw
-
- 14 Jun, 2019 2 commits
-
-
Aaron Lewis authored
Add the CPUID enumeration for Intel's de-feature bits to accommodate passing these de-features through to kvm guests. These de-features are (from SDM vol 1, section 8.1.8): - X86_FEATURE_FDP_EXCPTN_ONLY: If CPUID.(EAX=07H,ECX=0H):EBX[bit 6] = 1, the data pointer (FDP) is updated only for the x87 non-control instructions that incur unmasked x87 exceptions. - X86_FEATURE_ZERO_FCS_FDS: If CPUID.(EAX=07H,ECX=0H):EBX[bit 13] = 1, the processor deprecates FCS and FDS; it saves each as 0000H. Signed-off-by:
Aaron Lewis <aaronlewis@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: marcorr@google.com Cc: Peter Feiner <pfeiner@google.com> Cc: pshier@google.com Cc: Robert Hoo <robert.hu@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190605220252.103406-1-aaronlewis@google.com
-
Rajneesh Bhardwaj authored
Intel Ice Lake uncore support already included IMC PCI ID but ICL-NNPI CPUID is missing so add it to fix the probe function. Fixes: e39875d15ad6 ("perf/x86: add Intel Icelake uncore support") Signed-off-by:Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: alexander.shishkin@linux.intel.com Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linux PM <linux-pm@vger.kernel.org> Link: https://lkml.kernel.org/r/20190614081701.13828-1-rajneesh.bhardwaj@linux.intel.com
-
- 13 Jun, 2019 1 commit
-
-
Rajneesh Bhardwaj authored
Add the CPUID model number of Ice Lake Neural Network Processor for Deep Learning Inference (ICL-NNPI) to the Intel family list. Ice Lake NNPI uses model number 0x9D and this will be documented in a future version of Intel Software Development Manual. Signed-off-by:
-
- 09 Jun, 2019 1 commit
-
-
Linus Torvalds authored
-
- 08 Jun, 2019 8 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A change to call iput() asynchronously to avoid a possible deadlock when iput_final() needs to wait for in-flight I/O (e.g. readahead) and a fixup for a cleanup that went into -rc1" * tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client: ceph: fix error handling in ceph_get_caps() ceph: avoid iput_final() while holding mutex or in dispatch thread ceph: single workqueue for inode related works
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "Just one fix for the Xen block frontend driver avoiding allocations with order > 0" * tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkfront: switch kcalloc to kvcalloc for large array allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - fix stack unwinder: the stack unwinder rework has on off-by-one bug which prevents following stack backchains over more than one context (e.g. irq -> process). - fix address space detection in exception handler: if user space switches to access register mode, which is not supported anymore, the exception handler may resolve to the wrong address space. * tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/unwind: correct stack switching during unwind s390/mm: fix address space detection in exception handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: - Declare ginvt() __always_inline due to its use of an argument as an inline asm immediate. - A VDSO build fix following Kbuild changes made this cycle. - A fix for boot failures on txx9 systems following memory initialization changes made this cycle. - Bounds check virt_addr_valid() to prevent it spuriously indicating that bogus addresses are valid, in turn fixing hardened usercopy failures that have been present since v4.12. - Build uImage.gz for pistachio systems by default, since this is the image we need in order to actually boot on a board. - Remove an unused variable in our uprobes code. * tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: uprobes: remove set but not used variable 'epc' MIPS: pistachio: Build uImage.gz by default MIPS: Make virt_addr_valid() return bool MIPS: Bounds check virt_addr_valid MIPS: TXx9: Fix boot crash in free_initmem() MIPS: remove a space after -I to cope with header search paths for VDSO MIPS: mark ginvt() as __always_inline
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac4 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has a driver bugfix and a MAINTAINERS fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - jz4780 transfer fix for acking descriptors early - fsl-qdma: clean registers on error - dw-axi-dmac: null pointer dereference fix - mediatek-cqdma: fix sleeping in atomic context - tegra210-adma: fix bunch os issues like crashing in driver probe, channel FIFO configuration etc. - sprd: Fixes for possible crash on descriptor status, block length overflow. For 2-stage transfer fix incorrect start, configuration and interrupt handling. * tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: sprd: Add interrupt support for 2-stage transfer dmaengine: sprd: Fix the right place to configure 2-stage transfer dmaengine: sprd: Fix block length overflow dmaengine: sprd: Fix the incorrect start for 2-stage destination channels dmaengine: sprd: Add validation of current descriptor in irq handler dmaengine: sprd: Fix the possible crash when getting descriptor status dmaengine: tegra210-adma: Fix spelling dmaengine: tegra210-adma: Fix channel FIFO configuration dmaengine: tegra210-adma: Fix crash during probe dmaengine: mediatek-cqdma: sleeping in atomic context dmaengine: dw-axi-dmac: fix null dereference when pointer first is null dmaengine: fsl-qdma: Add improvement dmaengine: jz4780: Fix transfers being ACKed too soon
-
