- 06 Aug, 2018 40 commits
-
-
Sean Christopherson authored
Using 'struct loaded_vmcs*' to track whether the CPU registers contain host or guest state kills two birds with one stone. 1. The (effective) boolean host_state.loaded is poorly named. It does not track whether or not host state is loaded into the CPU registers (which most readers would expect), but rather tracks if host state has been saved AND guest state is loaded. 2. Using a loaded_vmcs pointer provides a more robust framework for the optimized guest/host state switching, especially when consideration per-VMCS enhancements. To that end, WARN_ONCE if we try to switch to host state with a different VMCS than was last used to save host state. Resolve an occurrence of the new WARN by setting loaded_vmcs after the call to vmx_vcpu_put() in vmx_switch_vmcs(). Signed-off-by:Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Use local variables in vmx_save_host_state() to temporarily track the selector and base values for FS and GS, and reorganize the code so that the 64-bit vs 32-bit portions are contained within a single #ifdef. This refactoring paves the way for future patches to modify the updating of VMCS state with minimal changes to the code, and (hopefully) simplifies resolving a likely conflict with another in-flight patch[1] by being the whipping boy for future patches. [1] https://www.spinics.net/lists/kvm/msg171647.htmlSigned-off-by:
-
Jim Mattson authored
When checking emulated VMX instructions for faults, the #UD for "IF (not in VMX operation)" should take precedence over the #GP for "ELSIF CPL > 0." Suggested-by:
Eric Northup <digitaleric@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Jim Mattson authored
The fault that should be raised for a privilege level violation is #GP rather than #UD. Fixes: 727ba748 ("kvm: nVMX: Enforce cpl=0 for VMX instructions") Signed-off-by:
-
Paolo Bonzini authored
We are currently cutting hva_to_pfn_fast short if we do not want an immediate exit, which is represented by !async && !atomic. However, this is unnecessary, and __get_user_pages_fast is *much* faster because the regular get_user_pages takes pmd_lock/pte_lock. In fact, when many CPUs take a nested vmexit at the same time the contention on those locks is visible, and this patch removes about 25% (compared to 4.18) from vmexit.flat on a 16 vCPU nested guest. Suggested-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Tianyu Lan authored
Register tlb_remote_flush callback for vmx when hyperv capability of nested guest mapping flush is detected. The interface can help to reduce overhead when flush ept table among vcpus for nested VM. The tradition way is to send IPIs to all affected vcpus and executes INVEPT on each vcpus. It will trigger several vmexits for IPI and INVEPT emulation. Hyper-V provides such hypercall to do flush for all vcpus and call the hypercall when all ept table pointers of single VM are same. Signed-off-by:
Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by:
-
Tianyu Lan authored
This patch is to provide a way for platforms to register hv tlb remote flush callback and this helps to optimize operation of tlb flush among vcpus for nested virtualization case. Signed-off-by:
-
Tianyu Lan authored
This patch is to add hyperv_nested_flush_guest_mapping support to trace hvFlushGuestPhysicalAddressSpace hypercall. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Tianyu Lan authored
Hyper-V supports a pv hypercall HvFlushGuestPhysicalAddressSpace to flush nested VM address space mapping in l1 hypervisor and it's to reduce overhead of flushing ept tlb among vcpus. This patch is to implement it. Signed-off-by:
-
Waiman Long authored
On a VM with only 1 vCPU, the locking fast path will always be successful. In this case, there is no need to use the the PV qspinlock code which has higher overhead on the unlock side than the native qspinlock code. Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
Tianyu Lan authored
Merge check of "sp->role.cr4_pae != !!is_pae(vcpu))" and "vcpu-> arch.mmu.sync_page(vcpu, sp) == 0". kvm_mmu_prepare_zap_page() is called under both these conditions. Signed-off-by:
-
Junaid Shahid authored
It is a duplicate of X86_CR3_PCID_NOFLUSH. So just use that instead. Signed-off-by:
Junaid Shahid <junaids@google.com> Signed-off-by:
-
Junaid Shahid authored
Adds support for storing multiple previous CR3/root_hpa pairs maintained as an LRU cache, so that the lockless CR3 switch path can be used when switching back to any of them. Signed-off-by:
-
Junaid Shahid authored
This needs a minor bug fix. The updated patch is as follows. Thanks, Junaid ------------------------------------------------------------------------------ kvm_mmu_invlpg() and kvm_mmu_invpcid_gva() only need to flush the TLB entries for the specific guest virtual address, instead of flushing all TLB entries associated with the VM. Signed-off-by:
-
Junaid Shahid authored
When the guest indicates that the TLB doesn't need to be flushed in a CR3 switch, we can also skip resyncing the shadow page tables since an out-of-sync shadow page table is equivalent to an out-of-sync TLB. Signed-off-by:
-
Junaid Shahid authored
kvm_mmu_free_roots() now takes a mask specifying which roots to free, so that either one of the roots (active/previous) can be individually freed when needed. Signed-off-by:
-
Junaid Shahid authored
This allows invlpg() to be called using either the active root_hpa or the prev_root_hpa. Signed-off-by:
-
Junaid Shahid authored
When PCIDs are enabled, the MSb of the source operand for a MOV-to-CR3 instruction indicates that the TLB doesn't need to be flushed. This change enables this optimization for MOV-to-CR3s in the guest that have been intercepted by KVM for shadow paging and are handled within the fast CR3 switch path. Signed-off-by:
-
Junaid Shahid authored
Implement support for INVPCID in shadow paging mode as well. Signed-off-by:
-
Junaid Shahid authored
When using shadow paging mode, propagate the guest's PCID value to the shadow CR3 in the host instead of always using PCID 0. Signed-off-by:
-
Junaid Shahid authored
Remove the implicit flush from the set_cr3 handlers, so that the callers are able to decide whether to flush the TLB or not. Signed-off-by:
-
Junaid Shahid authored
Use the fast CR3 switch mechanism to locklessly change the MMU root page when switching between L1 and L2. The switch from L2 to L1 should always go through the fast path, while the switch from L1 to L2 should go through the fast path if L1's CR3/EPTP for L2 hasn't changed since the last time. Signed-off-by:
-
Junaid Shahid authored
This adds support for re-initializing the MMU context in a different mode while preserving the active root_hpa and the prev_root. Signed-off-by:
-
Junaid Shahid authored
This generalizes the lockless CR3 switch path to be able to work across different MMU modes (e.g. nested vs non-nested) by checking that the expected page role of the new root page matches the page role of the previously stored root page in addition to checking that the new CR3 matches the previous CR3. Furthermore, instead of loading the hardware CR3 in fast_cr3_switch(), it is now done in vcpu_enter_guest(), as by that time the MMU context would be up-to-date with the VCPU mode. Signed-off-by:
-
Junaid Shahid authored
The KVM_REQ_LOAD_CR3 request loads the hardware CR3 using the current root_hpa. Signed-off-by:
-
Junaid Shahid authored
These functions factor out the base role calculation from the corresponding kvm_init_*_mmu() functions. The new functions return what would be the role assigned to a root page in the current VCPU state. This can be masked with mmu_base_role_mask to derive the base role. Signed-off-by:
-
Junaid Shahid authored
When using shadow paging, a CR3 switch in the guest results in a VM Exit. In the common case, that VM exit doesn't require much processing by KVM. However, it does acquire the MMU lock, which can start showing signs of contention under some workloads even on a 2 VCPU VM when the guest is using KPTI. Therefore, we add a fast path that avoids acquiring the MMU lock in the most common cases e.g. when switching back and forth between the kernel and user mode CR3s used by KPTI with no guest page table changes in between. For now, this fast path is implemented only for 64-bit guests and hosts to avoid the handling of PDPTEs, but it can be extended later to 32-bit guests and/or hosts as well. Signed-off-by:
-
Junaid Shahid authored
kvm_mmu_sync_roots() can locklessly check whether a sync is needed and just bail out if it isn't. Signed-off-by:
-
Junaid Shahid authored
sync_page() calls set_spte() from a loop across a page table. It would work better if set_spte() left the TLB flushing to its callers, so that sync_page() can aggregate into a single call. Signed-off-by:
-
Peter Xu authored
It's never used. Drop it. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Liran Alon authored
No functionality change. This is done as a preparation for VMCS shadowing virtualization. Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Liran Alon authored
No functionality change. Signed-off-by:
-
Liran Alon authored
Expose VMCS shadowing to L1 as a VMX capability of the virtual CPU, whether or not VMCS shadowing is supported by the physical CPU. (VMCS shadowing emulation) Shadowed VMREADs and VMWRITEs from L2 are handled by L0, without a VM-exit to L1. Signed-off-by:
-
Liran Alon authored
KVM: nVMX: Do not forward VMREAD/VMWRITE VMExits to L1 if required so by vmcs12 vmread/vmwrite bitmaps This is done as a preparation for VMCS shadowing emulation. Signed-off-by:
-
Liran Alon authored
This is done as a preparation to VMCS shadowing emulation. Signed-off-by:
-
Paolo Bonzini authored
This includes setting up the shadow VMCS and the secondary execution controls in lib/vmx.c. Signed-off-by: -
Paolo Bonzini authored
The shadow vmcs12 cannot be flushed on KVM_GET_NESTED_STATE, because at that point guest memory is assumed by userspace to be immutable. Capture the cache in vmx_get_nested_state, adding another page at the end if there is an active shadow vmcs12. Signed-off-by: -
Liran Alon authored
This is done is done as a preparation to VMCS shadowing emulation. Signed-off-by:
-
Liran Alon authored
Intel SDM considers these checks to be part of "Checks on Guest Non-Register State". Note that it is legal for vmcs->vmcs_link_pointer to be -1ull when VMCS shadowing is enabled. In this case, any VMREAD/VMWRITE to shadowed-field sets the ALU flags for VMfailInvalid (i.e. CF=1). Signed-off-by:
-
Liran Alon authored
Signed-off-by:
-
