- 01 Jul, 2013 11 commits
-
-
Josef Bacik authored
This patch does two things, first it only does one call to btrfs_buffer_uptodate() with the gen specified instead of once with 0 and then again with gen specified. The other thing is to call btrfs_read_buffer() on the buffer we've found instead of dropping it and then calling read_tree_block(). This will keep us from doing yet another radix tree lookup for a buffer we've already found. Thanks, Signed-off-by:Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
A user reported a deadlock where the async submit thread was blocked on the lock_extent() lock, and then everybody behind him was locked on the page lock for the page he was holding. Looking at the code I noticed we do not unlock the extent range when we get ENOSPC and goto retry. This is bad because we immediately try to lock that range again to do the cow, which will cause a deadlock. Fix this by unlocking the range. Thanks, Signed-off-by: -
Wang Sheng-Hui authored
The comment is for btrfs_attach_transaction_barrier, not for btrfs_attach_transaction. Fix the typo. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Acked-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Josef Bacik authored
We unconditionally search for the EXTENT_ITEM_KEY for metadata during balance, and then check the key that we found to see if it is actually a METADATA_ITEM_KEY, but this doesn't work right because METADATA is a higher key value, so if what we are looking for happens to be the first item in the leaf the search will dump us out at the previous leaf, and we won't find our item. So instead do what we do everywhere else, search for the skinny extent first and if we don't find it go back and re-search for the extent item. This patch fixes the panic I was hitting when balancing a large file system with skinny extents. Thanks, Signed-off-by: -
Josef Bacik authored
Looking into this backref problem I noticed we're using a macro to what turns out to essentially be a NULL check to see if we need to search the commit root. I'm killing this, let's just do what everybody else does and checks if trans == NULL. I've also made it so we pass in the path to __resolve_indirect_refs which will have the search_commit_root flag set properly already and that way we can avoid allocating another path when we have a perfectly good one to use. Thanks, Signed-off-by: -
Josef Bacik authored
A user reported scrub taking up an unreasonable amount of ram as it ran. This is because we lookup the csums for the extent we're scrubbing but don't free it up until after we're done with the scrub, which means we can take up a whole lot of ram. This patch fixes this by dropping the csums once we're done with the extent we've scrubbed. The user reported this to fix their problem. Thanks, Reported-and-tested-by:
Remco Hosman <remco@hosman.xs4all.nl> Signed-off-by:
-
Josef Bacik authored
Dave has this fs_mark script that can make btrfs abort with sufficient amount of ram. This is because with more ram we can keep more dirty metadata in cache which in a round about way makes for many more pending delayed refs. What happens is we end up not throttling the transaction enough so when we go to commit the transaction when we've completely filled the file system we'll abort() because we use all of the space in the global reserve and we still have delayed refs to run. To fix this we need to make the delayed ref flushing and the transaction throttling dependant upon the number of delayed refs that we have instead of how much reserved space is left in the global reserve. With this patch we not only stop aborting transactions but we also get a smoother run speed with fs_mark and it makes us about 10% faster. Thanks, Reported-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Josef Bacik authored
I hit a hang when run_delayed_refs returned an error in the beginning of btrfs_commit_transaction. If we decide we need to commit the transaction in btrfs_end_transaction we'll set BLOCKED and start to commit, but if we get an error this early on we'll just exit without committing. This is fine, except that anybody else who tried to start a transaction will sit in wait_current_trans() since we're set to BLOCKED and we never set it to something else and woke people up. To fix this we want to check for trans->aborted everywhere we wait for the transaction state to change, and make btrfs_abort_transaction() wake up any waiters there may be. All the callers will notice that the transaction has aborted and exit out properly. Thanks, Signed-off-by: -
Josef Bacik authored
I hit a deadlock because we aborted when flushing delayed refs but didn't wake any of the other flushers up and so everybody was just sleeping forever. This should fix the problem. Thanks, Signed-off-by: -
Jie Liu authored
Fix the code comments for lzo compression workspace. The buf item is used to store the decompressed data and cbuf is used to store the compressed data. Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
-
Miao Xie authored
Balance will create reloc_root for each fs root, and it's going to record last_snapshot to filter shared blocks. The side effect of setting last_snapshot is to break nocow attributes of files. Since the extents are not shared by the relocation tree after the balance, we can recover the old last_snapshot safely if no one snapshoted the source tree. We fix the above problem by this way. Reported-by:
Kyle Gates <kylegates@hotmail.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
- 14 Jun, 2013 29 commits
-
-
Josef Bacik authored
With non-mixed block groups we replay the logs before we're allowed to do any writes, so we get away with not pinning/removing the data extents until right when we replay them. However with mixed block groups we allocate out of the same pool, so we could easily allocate a metadata block that was logged in our tree log. To deal with this we just need to notice that we have mixed block groups and do the normal excluding/removal dance during the pin stage of the log replay and that way we don't allocate metadata blocks from areas we have logged data extents. With this patch we now pass xfstests generic/311 with mixed block groups turned on. Thanks, Signed-off-by: -
Josef Bacik authored
When we cross into a different subvol when doing a lookup we will run the orhpan cleanup. If this fails however we do not drop the ref to the inode we were looking up before we return an error, which leads to busy inodes on umount. Thanks, Signed-off-by: -
Josef Bacik authored
There are some error cases that we don't do an iput() on our inode, fix this. Thanks, Signed-off-by: -
Josef Bacik authored
When testing a corrupted fs I noticed I was getting sleep while atomic errors when the transaction aborted. This is because btrfs_pin_extent may need to allocate memory and we are calling this under the spin lock. Fix this by moving it out and doing the pin after dropping the spin lock but before dropping the mutex, the same way it works when delayed refs run normally. Thanks, Signed-off-by: -
Thomas Meyer authored
Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Thomas Meyer authored
Signed-off-by:
-
Jan Schmidt authored
When called during mount, we cannot start the rescan worker thread until open_ctree is done. This commit restuctures the qgroup rescan internals to enable a clean deferral of the rescan resume operation. First of all, the struct qgroup_rescan is removed, saving us a malloc and some initialization synchronizations problems. Its only element (the worker struct) now lives within fs_info just as the rest of the rescan code. Then setting up a rescan worker is split into several reusable stages. Currently we have three different rescan startup scenarios: (A) rescan ioctl (B) rescan resume by mount (C) rescan by quota enable Each case needs its own combination of the four following steps: (1) set the progress [A, C: zero; B: state of umount] (2) commit the transaction [A] (3) set the counters [A, C: zero; B: state of umount] (4) start worker [A, B, C] qgroup_rescan_init does step (1). There's no extra function added to commit a transaction, we've got that already. qgroup_rescan_zero_tracking does step (3). Step (4) is nothing more than a call to the generic btrfs_queue_worker. We also get rid of a double check for the rescan progress during btrfs_qgroup_account_ref, which is no longer required due to having step 2 from the list above. As a side effect, this commit prepares to move the rescan start code from btrfs_run_qgroups (which is run during commit) to a less time critical section. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by:
-
Jan Schmidt authored
When btrfs_read_qgroup_config or btrfs_quota_enable return non-zero, we've already freed the fs_info->qgroup_ulist. The final btrfs_free_qgroup_config called from quota_disable makes another ulist_free(fs_info->qgroup_ulist) call. We set fs_info->qgroup_ulist to NULL on the mentioned error paths, turning the ulist_free in btrfs_free_qgroup_config into a noop. Cc: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by:
-
Jan Schmidt authored
Commit 5b7c665e introduced fs_info->qgroup_ulist, that is allocated during btrfs_read_qgroup_config and meant to be used later by the qgroup accounting code. However, it is always freed before btrfs_read_qgroup_config returns, becuase the commit mentioned above adds a check for (ret), where a check for (ret < 0) would have been the right choice. This commit fixes the check. Cc: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by:
-
Josef Bacik authored
Dave pointed out a problem where if you filled up a file system as much as possible you couldn't remove any files. The whole unlink reservation thing is convoluted because it tries to guess if it's going to add space to unlink something or not, and has all these odd uncommented cases where it simply does not try. So to fix this I've added a way to conditionally steal from the global reserve if we can't make our normal reservation. If we have more than half the space in the global reserve free we will go ahead and steal from the global reserve. With this patch Dave's reproducer now works and I can rm all the files on the file system. Thanks, Reported-by:
-
Miao Xie authored
Before applying this patch, we flushed the log tree of the fs/file tree firstly, and then flushed the log root tree. It is ineffective, especially on the hard disk. This patch improved this problem by wrapping the above two flushes by the same blk_plug. By test, the performance of the sync write went up ~60%(2.9MB/s -> 4.6MB/s) on my scsi disk whose disk buffer was enabled. Test step: # mkfs.btrfs -f -m single <disk> # mount <disk> <mnt> # dd if=/dev/zero of=<mnt>/file0 bs=32K count=1024 oflag=sync Signed-off-by:
-
Liu Bo authored
We did not allow file data clone within the same file because of deadlock issues. However, we now use nested lock to avoid deadlock between the parent directory and the child file. So it's safe to do file clone within the same file when the two ranges are not overlapped. Reviewed-by:
-
Liu Bo authored
'leaf' and 'ri' is not used somehow. Signed-off-by:
-
Liu Bo authored
EXTREF is treated same as REF, so we can make the code tidy. Signed-off-by:
-
Liu Bo authored
Adding new flags to keep tracepoints consistent with btrfs. Signed-off-by:
-
Liu Bo authored
During splitting a leaf, pushing items around to hopefully get some space only works when we have a parent, ie. we have at least one sibling leaf. Signed-off-by:
-
Liu Bo authored
As for splitting a leaf, root is just the leaf, and tree mod log does not apply on leaf, so in this case, we don't do log_removal. As for splitting a node, the old root is kept as a normal node and we have nicely put records in tree mod log for moving keys and items, so in this case we don't do that either. As above, insert_new_root can get rid of log_removal. Signed-off-by:
-
Wei Yongjun authored
Fix to return error code instead always return 0 from function btrfs_check_trunc_cache_free_space(). Introduced by commit 7b61cd92 (Btrfs: don't use global block reservation for inode cache truncation) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by:
-
Josef Bacik authored
This fixes bugzilla 57491. If we take a snapshot of a fs with a unlink ongoing and then try to send that root we will run into problems. When comparing with a parent root we will search the parents and the send roots commit_root, which if we've just created the snapshot will include the file that needs to be evicted by the orphan cleanup. So when we find a changed extent we will try and copy that info into the send stream, but when we lookup the inode we use the normal root, which no longer has the inode because the orphan cleanup deleted it. The best solution I have for this is to check our otransid with the generation of the commit root and if they match just commit the transaction again, that way we get the changes from the orphan cleanup. With this patch the reproducer I made for this bugzilla no longer returns ESTALE when trying to do the send. Thanks, Cc: stable@vger.kernel.org Reported-by:
Chris Wilson <jakdaw@gmail.com> Signed-off-by:
-
Anand Jain authored
when user runs command btrfs dev del the raid requisite error if any goes to the /var/log/messages, its not good idea to clutter messages with these user (knowledge) errors, further user don't have to review the system messages to know problem with the cli it should be dropped to the user as part of the cli return. to bring this feature created a set of the ERROR defined BTRFS_ERROR_DEV* error codes and created their error string. I expect this enum to be added with other error which we might want to communicate to the user land v3: moved the code with in the file no logical change v1->v2: introduce error codes for the device mgmt usage v1: adds a parameter in the ioctl arg struct to carry the error string Signed-off-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Josef Bacik authored
We get lock inversion with umount if we allow iputs from sync_fs, so use the delay iput flag to keep this from happening. Thanks, Reported-by:
-
Miao Xie authored
We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: -
Miao Xie authored
We checked the commit time to avoid committing the transaction frequently, but it is unnecessary because: - It made the transaction commit spend more time, and delayed the operation of the external writers(TRANS_START/TRANS_USERSPACE). - Except the space that we have to commit transaction, such as snapshot creation, btrfs doesn't commit the transaction on its own initiative. Signed-off-by:
-
Miao Xie authored
We used ->num_joined track if there were some writers which join the current transaction when the committer was sleeping. If some writers joined the current transaction, we has to continue the while loop to do some necessary stuff, such as flush the ordered operations. But it is unnecessary because we will do it after the while loop. Besides that, tracking ->num_joined would make the committer drop into the while loop when there are lots of internal writers(TRANS_JOIN). So we remove ->num_joined and don't track if there are some writers which join the current transaction when the committer is sleeping. Signed-off-by:
-
Miao Xie authored
It is unnecessary to flush the delalloc inodes again and again because we don't care the dirty pages which are introduced after the flush, and they will be flush in the transaction commit. Signed-off-by:
-
Miao Xie authored
btrfs_commit_transaction has the following loop before we commit the transaction. do { // attempt to do some useful stuff and/or sleep } while (atomic_read(&cur_trans->num_writers) > 1 || (should_grow && cur_trans->num_joined != joined)); This is used to prevent from the TRANS_START to get in the way of a committing transaction. But it does not prevent from TRANS_JOIN, that is we would do this loop for a long time if some writers JOIN the current transaction endlessly. Because we need join the current transaction to do some useful stuff, we can not block TRANS_JOIN here. So we introduce a external writer counter, which is used to count the TRANS_USERSPACE/TRANS_START writers. If the external writer counter is zero, we can break the above loop. In order to make the code more clear, we don't use enum variant to define the type of the transaction handle, use bitmask instead. Signed-off-by: -
Miao Xie authored
If the transaction is removed from the transaction list, it means the transaction has been committed successfully. So it is impossible to call cleanup_transaction(), otherwise there is something wrong with the code logic. Thus, we use BUG_ON() instead of the original handle. Signed-off-by:
-
Miao Xie authored
When we umount a fs with serious errors, we will invoke btrfs_cleanup_transactions() to clean up the residual transaction. At this time, It is impossible to start a new transaction, so we needn't assign trans_no_join to 1, and also needn't clear running transaction every time we destroy a residual transaction. Signed-off-by:
-
Miao Xie authored
Before applying this patch, we need flush all the delalloc inodes in the fs when we want to create a snapshot, it wastes time, and make the transaction commit be blocked for a long time. It means some other user operation would also be blocked for a long time. This patch improves this problem, we just flush the delalloc inodes that in the source trees before snapshot creation, so the transaction commit will complete quickly. Signed-off-by:
-
