- 06 Jan, 2017 40 commits
-
-
Jaegeuk Kim authored
commit e87f7329 upstream. In the last ilen case, i was already increased, resulting in accessing out- of-boundary entry of do_replace and blkaddr. Fix to check ilen first to exit the loop. Fixes: 2aa8fbb9693020 ("f2fs: refactor __exchange_data_block for speed up") Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolai Stange authored
commit 05e6ea26 upstream. The struct file_operations instance serving the f2fs/status debugfs file lacks an initialization of its ->owner. This means that although that file might have been opened, the f2fs module can still get removed. Any further operation on that opened file, releasing included, will cause accesses to unmapped memory. Indeed, Mike Marshall reported the following: BUG: unable to handle kernel paging request at ffffffffa0307430 IP: [<ffffffff8132a224>] full_proxy_release+0x24/0x90 <...> Call Trace: [] __fput+0xdf/0x1d0 [] ____fput+0xe/0x10 [] task_work_run+0x8e/0xc0 [] do_exit+0x2ae/0xae0 [] ? __audit_syscall_entry+0xae/0x100 [] ? syscall_trace_enter+0x1ca/0x310 [] do_group_exit+0x44/0xc0 [] SyS_exit_group+0x14/0x20 [] do_syscall_64+0x61/0x150 [] entry_SYSCALL64_slow_path+0x25/0x25 <...> ---[ end trace f22ae883fa3ea6b8 ]--- Fixing recursive fault but reboot is needed! Fix this by initializing the f2fs/status file_operations' ->owner with THIS_MODULE. This will allow debugfs to grab a reference to the f2fs module upon any open on that file, thus preventing it from getting removed. Fixes: 902829aa ("f2fs: move proc files to debugfs") Reported-by:
Mike Marshall <hubcap@omnibond.com> Reported-by:
Martin Brandenburg <martin@omnibond.com> Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Jaegeuk Kim authored
commit 204706c7 upstream. This reverts commit 1beba1b3. The perpcu_counter doesn't provide atomicity in single core and consume more DRAM. That incurs fs_mark test failure due to ENOMEM. Signed-off-by:
-
Sergey Karamov authored
commit 73b92a2a upstream. Currently data journalling is incompatible with encryption: enabling both at the same time has never been supported by design, and would result in unpredictable behavior. However, users are not precluded from turning on both features simultaneously. This change programmatically replaces data journaling for encrypted regular files with ordered data journaling mode. Background: Journaling encrypted data has not been supported because it operates on buffer heads of the page in the page cache. Namely, when the commit happens, which could be up to five seconds after caching, the commit thread uses the buffer heads attached to the page to copy the contents of the page to the journal. With encryption, it would have been required to keep the bounce buffer with ciphertext for up to the aforementioned five seconds, since the page cache can only hold plaintext and could not be used for journaling. Alternatively, it would be required to setup the journal to initiate a callback at the commit time to perform deferred encryption - in this case, not only would the data have to be written twice, but it would also have to be encrypted twice. This level of complexity was not justified for a mode that in practice is very rarely used because of the overhead from the data journalling. Solution: If data=journaled has been set as a mount option for a filesystem, or if journaling is enabled on a regular file, do not perform journaling if the file is also encrypted, instead fall back to the data=ordered mode for the file. Rationale: The intent is to allow seamless and proper filesystem operation when journaling and encryption have both been enabled, and have these two conflicting features gracefully resolved by the filesystem. Fixes: 44614711Signed-off-by:
Sergey Karamov <skaramov@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Dan Carpenter authored
commit 578620f4 upstream. We should set the error code if kzalloc() fails. Fixes: 67cf5b09 ("ext4: add the basic function for inline data support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Darrick J. Wong authored
commit 7e6e1ef4 upstream. Don't load an inode with a negative size; this causes integer overflow problems in the VFS. [ Added EXT4_ERROR_INODE() to mark file system as corrupted. -TYT] Fixes: a48380f7 (ext4: rename i_dir_acl to i_size_high) Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Theodore Ts'o authored
commit c48ae41b upstream. The commit "ext4: sanity check the block and cluster size at mount time" should prevent any problems, but in case the superblock is modified while the file system is mounted, add an extra safety check to make sure we won't overrun the allocated buffer. Signed-off-by:
-
Theodore Ts'o authored
commit 5aee0f8a upstream. Fix a large number of problems with how we handle mount options in the superblock. For one, if the string in the superblock is long enough that it is not null terminated, we could run off the end of the string and try to interpret superblocks fields as characters. It's unlikely this will cause a security problem, but it could result in an invalid parse. Also, parse_options is destructive to the string, so in some cases if there is a comma-separated string, it would be modified in the superblock. (Fortunately it only happens on file systems with a 1k block size.) Signed-off-by:
-
Theodore Ts'o authored
commit cd6bb35b upstream. Centralize the checks for inodes_per_block and be more strict to make sure the inodes_per_block_group can't end up being zero. Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Chandan Rajendra authored
commit 30a9d7af upstream. The number of 'counters' elements needed in 'struct sg' is super_block->s_blocksize_bits + 2. Presently we have 16 'counters' elements in the array. This is insufficient for block sizes >= 32k. In such cases the memcpy operation performed in ext4_mb_seq_groups_show() would cause stack memory corruption. Fixes: c9de560dSigned-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Chandan Rajendra authored
commit 69e43e8c upstream. 'border' variable is set to a value of 2 times the block size of the underlying filesystem. With 64k block size, the resulting value won't fit into a 16-bit variable. Hence this commit changes the data type of 'border' to 'unsigned int'. Fixes: c9de560dSigned-off-by:
-
Alex Porosanu authored
commit d128af17 upstream. The AEAD givenc descriptor relies on moving the IV through the output FIFO and then back to the CTX2 for authentication. The SEQ FIFO STORE could be scheduled before the data can be read from OFIFO, especially since the SEQ FIFO LOAD needs to wait for the SEQ FIFO LOAD SKIP to finish first. The SKIP takes more time when the input is SG than when it's a contiguous buffer. If the SEQ FIFO LOAD is not scheduled before the STORE, the DECO will hang waiting for data to be available in the OFIFO so it can be transferred to C2. In order to overcome this, first force transfer of IV to C2 by starting the "cryptlen" transfer first and then starting to store data from OFIFO to the output buffer. Fixes: 1acebad3 ("crypto: caam - faster aead implementation") Signed-off-by:
Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric W. Biederman authored
commit 64b875f7 upstream. When the flag PT_PTRACE_CAP was added the PTRACE_TRACEME path was overlooked. This can result in incorrect behavior when an application like strace traces an exec of a setuid executable. Further PT_PTRACE_CAP does not have enough information for making good security decisions as it does not report which user namespace the capability is in. This has already allowed one mistake through insufficient granulariy. I found this issue when I was testing another corner case of exec and discovered that I could not get strace to set PT_PTRACE_CAP even when running strace as root with a full set of caps. This change fixes the above issue with strace allowing stracing as root a setuid executable without disabling setuid. More fundamentaly this change allows what is allowable at all times, by using the correct information in it's decision. Fixes: 4214e42f96d4 ("v2.4.9.11 -> v2.4.9.12") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Linus Torvalds authored
commit d05c5f7b upstream. We truncated the possible read iterator to s_maxbytes in commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), but our end condition handling was wrong: it's not an error to try to read at the end of the file. Reading past the end should return EOF (0), not EINVAL. See for example https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1649342 http://lists.gnu.org/archive/html/bug-coreutils/2016-12/msg00008.html where a md5sum of a maximally sized file fails because the final read is exactly at s_maxbytes. Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Wei Fang <fangwei1@huawei.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric W. Biederman authored
commit bfedb589 upstream. During exec dumpable is cleared if the file that is being executed is not readable by the user executing the file. A bug in ptrace_may_access allows reading the file if the executable happens to enter into a subordinate user namespace (aka clone(CLONE_NEWUSER), unshare(CLONE_NEWUSER), or setns(fd, CLONE_NEWUSER). This problem is fixed with only necessary userspace breakage by adding a user namespace owner to mm_struct, captured at the time of exec, so it is clear in which user namespace CAP_SYS_PTRACE must be present in to be able to safely give read permission to the executable. The function ptrace_may_access is modified to verify that the ptracer has CAP_SYS_ADMIN in task->mm->user_ns instead of task->cred->user_ns. This ensures that if the task changes it's cred into a subordinate user namespace it does not become ptraceable. The function ptrace_attach is modified to only set PT_PTRACE_CAP when CAP_SYS_PTRACE is held over task->mm->user_ns. The intent of PT_PTRACE_CAP is to be a flag to note that whatever permission changes the task might go through the tracer has sufficient permissions for it not to be an issue. task->cred->user_ns is always the same as or descendent of mm->user_ns. Which guarantees that having CAP_SYS_PTRACE over mm->user_ns is the worst case for the tasks credentials. To prevent regressions mm->dumpable and mm->user_ns are not considered when a task has no mm. As simply failing ptrace_may_attach causes regressions in privileged applications attempting to read things such as /proc/<pid>/stat Acked-by:
Kees Cook <keescook@chromium.org> Tested-by:
Cyrill Gorcunov <gorcunov@openvz.org> Fixes: 8409cca7 ("userns: allow ptrace from non-init user namespaces") Signed-off-by:
-
NeilBrown authored
commit bcc7f5b4 upstream. bdev->bd_contains is not stable before calling __blkdev_get(). When __blkdev_get() is called on a parition with ->bd_openers == 0 it sets bdev->bd_contains = bdev; which is not correct for a partition. After a call to __blkdev_get() succeeds, ->bd_openers will be > 0 and then ->bd_contains is stable. When FMODE_EXCL is used, blkdev_get() calls bd_start_claiming() -> bd_prepare_to_claim() -> bd_may_claim() This call happens before __blkdev_get() is called, so ->bd_contains is not stable. So bd_may_claim() cannot safely use ->bd_contains. It currently tries to use it, and this can lead to a BUG_ON(). This happens when a whole device is already open with a bd_holder (in use by dm in my particular example) and two threads race to open a partition of that device for the first time, one opening with O_EXCL and one without. The thread that doesn't use O_EXCL gets through blkdev_get() to __blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev; Immediately thereafter the other thread, using FMODE_EXCL, calls bd_start_claiming() from blkdev_get(). This should fail because the whole device has a holder, but because bdev->bd_contains == bdev bd_may_claim() incorrectly reports success. This thread continues and blocks on bd_mutex. The first thread then sets bdev->bd_contains correctly and drops the mutex. The thread using FMODE_EXCL then continues and when it calls bd_may_claim() again in: BUG_ON(!bd_may_claim(bdev, whole, holder)); The BUG_ON fires. Fix this by removing the dependency on ->bd_contains in bd_may_claim(). As bd_may_claim() has direct access to the whole device, it can simply test if the target bdev is the whole device. Fixes: 6b4517a7 ("block: implement bd_claiming and claiming block") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Aleksa Sarai authored
commit 613cc2b6 upstream. If you have a process that has set itself to be non-dumpable, and it then undergoes exec(2), any CLOEXEC file descriptors it has open are "exposed" during a race window between the dumpable flags of the process being reset for exec(2) and CLOEXEC being applied to the file descriptors. This can be exploited by a process by attempting to access /proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE. The race in question is after set_dumpable has been (for get_link, though the trace is basically the same for readlink): [vfs] -> proc_pid_link_inode_operations.get_link -> proc_pid_get_link -> proc_fd_access_allowed -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS); Which will return 0, during the race window and CLOEXEC file descriptors will still be open during this window because do_close_on_exec has not been called yet. As a result, the ordering of these calls should be reversed to avoid this race window. This is of particular concern to container runtimes, where joining a PID namespace with file descriptors referring to the host filesystem can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect against access of CLOEXEC file descriptors -- file descriptors which may reference filesystem objects the container shouldn't have access to). Cc: dev@opencontainers.org Reported-by:
Michael Crosby <crosbymichael@gmail.com> Signed-off-by:
Aleksa Sarai <asarai@suse.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric W. Biederman authored
commit f84df2a6 upstream. When the user namespace support was merged the need to prevent ptrace from revealing the contents of an unreadable executable was overlooked. Correct this oversight by ensuring that the executed file or files are in mm->user_ns, by adjusting mm->user_ns. Use the new function privileged_wrt_inode_uidgid to see if the executable is a member of the user namespace, and as such if having CAP_SYS_PTRACE in the user namespace should allow tracing the executable. If not update mm->user_ns to the parent user namespace until an appropriate parent is found. Reported-by:
Jann Horn <jann@thejh.net> Fixes: 9e4a36ec ("userns: Fail exec for suid and sgid binaries with ids outside our user namespace.") Signed-off-by:
-
Wang Xiaoguang authored
commit 69ae5e44 upstream. Indeed this just make the behavior similar to xfs when process has fatal signals pending, and it'll make fstests/generic/298 happy. Signed-off-by:
Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
commit d5e84fd8 upstream. Commit 95155585 ("Btrfs: send, don't bug on inconsistent snapshots") removed some BUG_ON() statements (replacing them with returning errors to user space and logging error messages) when a snapshot is in an inconsistent state due to failures to update a delayed inode item (ENOMEM or ENOSPC) after adding/updating/deleting references, xattrs or file extent items. However there is a case, when no errors happen, where a file extent item can be modified without having the corresponding inode item updated. This case happens during balance under very specific timings, when relocation is in the stage where it updates data pointers and a leaf that contains file extent items is COWed. When that happens file extent items get their disk_bytenr field updated to a new value that reflects the post relocation logical address of the extent, without updating their respective inode items (as there is nothing that needs to be updated on them). This is performed at relocation.c:replace_file_extents() through relocation.c:btrfs_reloc_cow_block(). So make an incremental send deal with this case and don't do any processing for a file extent item that got its disk_bytenr field updated by relocation, since the extent's data is the same as the one pointed by the file extent item in the parent snapshot. After the recent commit mentioned above this case resulted in EIO errors returned to user space (and an error message logged to dmesg/syslog) when doing an incremental send, while before it, it resulted in hitting a BUG_ON leading to the following trace: [ 952.206705] ------------[ cut here ]------------ [ 952.206714] kernel BUG at ../fs/btrfs/send.c:5653! [ 952.206719] Internal error: Oops - BUG: 0 [#1] SMP [ 952.209854] Modules linked in: st dm_mod nls_utf8 isofs fuse nf_log_ipv6 xt_pkttype xt_physdev br_netfilter nf_log_ipv4 nf_log_common xt_LOG xt_limit ebtable_filter ebtables af_packet bridge stp llc ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables xfs libcrc32c nls_iso8859_1 nls_cp437 vfat fat joydev aes_ce_blk ablk_helper cryptd snd_intel8x0 aes_ce_cipher snd_ac97_codec ac97_bus snd_pcm ghash_ce sha2_ce sha1_ce snd_timer snd virtio_net soundcore btrfs xor sr_mod cdrom hid_generic usbhid raid6_pq virtio_blk virtio_scsi bochs_drm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_mmio xhci_pci xhci_hcd usbcore usb_common virtio_pci virtio_ring virtio drm sg efivarfs [ 952.228333] Supported: Yes [ 952.228908] CPU: 0 PID: 12779 Comm: snapperd Not tainted 4.4.14-50-default #1 [ 952.230329] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 952.231683] task: ffff800058e94100 ti: ffff8000d866c000 task.ti: ffff8000d866c000 [ 952.233279] PC is at changed_cb+0x9f4/0xa48 [btrfs] [ 952.234375] LR is at changed_cb+0x58/0xa48 [btrfs] [ 952.236552] pc : [<ffff7ffffc39de7c>] lr : [<ffff7ffffc39d4e0>] pstate: 80000145 [ 952.238049] sp : ffff8000d866fa20 [ 952.238732] x29: ffff8000d866fa20 x28: 0000000000000019 [ 952.239840] x27: 00000000000028d5 x26: 00000000000024a2 [ 952.241008] x25: 0000000000000002 x24: ffff8000e66e92f0 [ 952.242131] x23: ffff8000b8c76800 x22: ffff800092879140 [ 952.243238] x21: 0000000000000002 x20: ffff8000d866fb78 [ 952.244348] x19: ffff8000b8f8c200 x18: 0000000000002710 [ 952.245607] x17: 0000ffff90d42480 x16: ffff800000237dc0 [ 952.246719] x15: 0000ffff90de7510 x14: ab000c000a2faf08 [ 952.247835] x13: 0000000000577c2b x12: ab000c000b696665 [ 952.248981] x11: 2e65726f632f6966 x10: 652d34366d72612f [ 952.250101] x9 : 32627572672f746f x8 : ab000c00092f1671 [ 952.251352] x7 : 8000000000577c2b x6 : ffff800053eadf45 [ 952.252468] x5 : 0000000000000000 x4 : ffff80005e169494 [ 952.253582] x3 : 0000000000000004 x2 : ffff8000d866fb78 [ 952.254695] x1 : 000000000003e2a3 x0 : 000000000003e2a4 [ 952.255803] [ 952.256150] Process snapperd (pid: 12779, stack limit = 0xffff8000d866c020) [ 952.257516] Stack: (0xffff8000d866fa20 to 0xffff8000d8670000) [ 952.258654] fa20: ffff8000d866fae0 ffff7ffffc308fc0 ffff800092879140 ffff8000e66e92f0 [ 952.260219] fa40: 0000000000000035 ffff800055de6000 ffff8000b8c76800 ffff8000d866fb78 [ 952.261745] fa60: 0000000000000002 00000000000024a2 00000000000028d5 0000000000000019 [ 952.263269] fa80: ffff8000d866fae0 ffff7ffffc3090f0 ffff8000d866fae0 ffff7ffffc309128 [ 952.264797] faa0: ffff800092879140 ffff8000e66e92f0 0000000000000035 ffff800055de6000 [ 952.268261] fac0: ffff8000b8c76800 ffff8000d866fb78 0000000000000002 0000000000001000 [ 952.269822] fae0: ffff8000d866fbc0 ffff7ffffc39ecfc ffff8000b8f8c200 ffff8000b8f8c368 [ 952.271368] fb00: ffff8000b8f8c378 ffff800055de6000 0000000000000001 ffff8000ecb17500 [ 952.272893] fb20: ffff8000b8c76800 ffff800092879140 ffff800062b6d000 ffff80007a9e2470 [ 952.274420] fb40: ffff8000b8f8c208 0000000005784000 ffff8000580a8000 ffff8000b8f8c200 [ 952.276088] fb60: ffff7ffffc39d488 00000002b8f8c368 0000000000000000 000000000003e2a4 [ 952.280275] fb80: 000000000000006c ffff7ffffc39ec00 000000000003e2a4 000000000000006c [ 952.283219] fba0: ffff8000b8f8c300 0000000000000100 0000000000000001 ffff8000ecb17500 [ 952.286166] fbc0: ffff8000d866fcd0 ffff7ffffc3643c0 ffff8000f8842700 0000ffff8ffe9278 [ 952.289136] fbe0: 0000000040489426 ffff800055de6000 0000ffff8ffe9278 0000000040489426 [ 952.292083] fc00: 000000000000011d 000000000000001d ffff80007a9e4598 ffff80007a9e43e8 [ 952.294959] fc20: ffff8000b8c7693f 0000000000003b24 0000000000000019 ffff8000b8f8c218 [ 952.301161] fc40: 00000001d866fc70 ffff8000b8c76800 0000000000000128 ffffffffffffff84 [ 952.305749] fc60: ffff800058e941ff 0000000000003a58 ffff8000d866fcb0 ffff8000000f7390 [ 952.308875] fc80: 000000000000012a 0000000000010290 ffff8000d866fc00 000000000000007b [ 952.311915] fca0: 0000000000010290 ffff800046c1b100 74732d7366727462 000001006d616572 [ 952.314937] fcc0: ffff8000fffc4100 cb88537fdc8ba60e ffff8000d866fe10 ffff8000002499e8 [ 952.318008] fce0: 0000000040489426 ffff8000f8842700 0000ffff8ffe9278 ffff80007a9e4598 [ 952.321321] fd00: 0000ffff8ffe9278 0000000040489426 000000000000011d 000000000000001d [ 952.324280] fd20: ffff80000072c000 ffff8000d866c000 ffff8000d866fda0 ffff8000000e997c [ 952.327156] fd40: ffff8000fffc4180 00000000000031ed ffff8000fffc4180 ffff800046c1b7d4 [ 952.329895] fd60: 0000000000000140 0000ffff907ea170 000000000000011d 00000000000000dc [ 952.334641] fd80: ffff80000072c000 ffff8000d866c000 0000000000000000 0000000000000002 [ 952.338002] fda0: ffff8000d866fdd0 ffff8000000ebacc ffff800046c1b080 ffff800046c1b7d4 [ 952.340724] fdc0: ffff8000d866fdf0 ffff8000000db67c 0000000000000040 ffff800000e69198 [ 952.343415] fde0: 0000ffff8ffea790 00000000000031ed ffff8000d866fe20 ffff800000254000 [ 952.346101] fe00: 000000000000001d 0000000000000004 ffff8000d866fe90 ffff800000249d3c [ 952.348980] fe20: ffff8000f8842700 0000000000000000 ffff8000f8842701 0000000000000008 [ 952.351696] fe40: ffff8000d866fe70 0000000000000008 ffff8000d866fe90 ffff800000249cf8 [ 952.354387] fe60: ffff8000f8842700 0000ffff8ffe9170 ffff8000f8842701 0000000000000008 [ 952.357083] fe80: 0000ffff8ffe9278 ffff80008ff85500 0000ffff8ffe90c0 ffff800000085c84 [ 952.359800] fea0: 0000000000000000 0000ffff8ffe9170 ffffffffffffffff 0000ffff90d473bc [ 952.365351] fec0: 0000000000000000 0000000000000015 0000000000000008 0000000040489426 [ 952.369550] fee0: 0000ffff8ffe9278 0000ffff907ea790 0000ffff907ea170 0000ffff907ea790 [ 952.372416] ff00: 0000ffff907ea170 0000000000000000 000000000000001d 0000000000000004 [ 952.375223] ff20: 0000ffff90a32220 00000000003d0f00 0000ffff907ea0a0 0000ffff8ffe8f30 [ 952.378099] ff40: 0000ffff9100f554 0000ffff91147000 0000ffff91117bc0 0000ffff90d473b0 [ 952.381115] ff60: 0000ffff9100f620 0000ffff880069b0 0000ffff8ffe9170 0000ffff8ffe91a0 [ 952.384003] ff80: 0000ffff8ffe9160 0000ffff8ffe9140 0000ffff88006990 0000ffff8ffe9278 [ 952.386860] ffa0: 0000ffff88008a60 0000ffff8ffe9480 0000ffff88014ca0 0000ffff8ffe90c0 [ 952.389654] ffc0: 0000ffff910be8e8 0000ffff8ffe90c0 0000ffff90d473bc 0000000000000000 [ 952.410986] ffe0: 0000000000000008 000000000000001d 6e2079747265706f 72616d223d656d61 [ 952.415497] Call trace: [ 952.417403] [<ffff7ffffc39de7c>] changed_cb+0x9f4/0xa48 [btrfs] [ 952.420023] [<ffff7ffffc308fc0>] btrfs_compare_trees+0x500/0x6b0 [btrfs] [ 952.422759] [<ffff7ffffc39ecfc>] btrfs_ioctl_send+0xb4c/0xe10 [btrfs] [ 952.425601] [<ffff7ffffc3643c0>] btrfs_ioctl+0x374/0x29a4 [btrfs] [ 952.428031] [<ffff8000002499e8>] do_vfs_ioctl+0x33c/0x600 [ 952.430360] [<ffff800000249d3c>] SyS_ioctl+0x90/0xa4 [ 952.432552] [<ffff800000085c84>] el0_svc_naked+0x38/0x3c [ 952.434803] Code: 2a1503e0 17fffdac b9404282 17ffff28 (d4210000) [ 952.437457] ---[ end trace 9afd7090c466cf15 ]--- Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Josef Bacik authored
commit 4867268c upstream. Really there's lots of things that can go wrong here, kill all the BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO instead. Signed-off-by:
Josef Bacik <jbacik@fb.com> [ switched to btrfs_err, errors go to common label ] Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Anand Jain authored
commit 0ccd0528 upstream. btrfs_show_devname() is using the device_list_mutex, sometimes a call to blkdev_put() leads vfs calling into this func. So call blkdev_put() outside of device_list_mutex, as of now. [ 983.284212] ====================================================== [ 983.290401] [ INFO: possible circular locking dependency detected ] [ 983.296677] 4.8.0-rc5-ceph-00023-g1b39cec2 #1 Not tainted [ 983.302081] ------------------------------------------------------- [ 983.308357] umount/21720 is trying to acquire lock: [ 983.313243] (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.321264] [ 983.321264] but task is already holding lock: [ 983.327101] (&fs_devs->device_list_mutex){+.+...}, at: [<ffffffffc033d6f6>] __btrfs_close_devices+0x46/0x200 [btrfs] [ 983.337839] [ 983.337839] which lock already depends on the new lock. [ 983.337839] [ 983.346024] [ 983.346024] the existing dependency chain (in reverse order) is: [ 983.353512] -> #4 (&fs_devs->device_list_mutex){+.+...}: [ 983.359096] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.365143] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.371521] [<ffffffffc02d8116>] btrfs_show_devname+0x36/0x1f0 [btrfs] [ 983.378710] [<ffffffff9129523e>] show_vfsmnt+0x4e/0x150 [ 983.384593] [<ffffffff9126ffc7>] m_show+0x17/0x20 [ 983.389957] [<ffffffff91276405>] seq_read+0x2b5/0x3b0 [ 983.395669] [<ffffffff9124c808>] __vfs_read+0x28/0x100 [ 983.401464] [<ffffffff9124eb3b>] vfs_read+0xab/0x150 [ 983.407080] [<ffffffff9124ec32>] SyS_read+0x52/0xb0 [ 983.412609] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.419617] -> #3 (namespace_sem){++++++}: [ 983.424024] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.430074] [<ffffffff918239e9>] down_write+0x49/0x80 [ 983.435785] [<ffffffff91272457>] lock_mount+0x67/0x1c0 [ 983.441582] [<ffffffff91272ab2>] do_add_mount+0x32/0xf0 [ 983.447458] [<ffffffff9127363a>] finish_automount+0x5a/0xc0 [ 983.453682] [<ffffffff91259513>] follow_managed+0x1b3/0x2a0 [ 983.459912] [<ffffffff9125b750>] lookup_fast+0x300/0x350 [ 983.465875] [<ffffffff9125d6e7>] path_openat+0x3a7/0xaa0 [ 983.471846] [<ffffffff9125ef75>] do_filp_open+0x85/0xe0 [ 983.477731] [<ffffffff9124c41c>] do_sys_open+0x14c/0x1f0 [ 983.483702] [<ffffffff9124c4de>] SyS_open+0x1e/0x20 [ 983.489240] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.496254] -> #2 (&sb->s_type->i_mutex_key#3){+.+.+.}: [ 983.501798] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.507855] [<ffffffff918239e9>] down_write+0x49/0x80 [ 983.513558] [<ffffffff91366237>] start_creating+0x87/0x100 [ 983.519703] [<ffffffff91366647>] debugfs_create_dir+0x17/0x100 [ 983.526195] [<ffffffff911df153>] bdi_register+0x93/0x210 [ 983.532165] [<ffffffff911df313>] bdi_register_owner+0x43/0x70 [ 983.538570] [<ffffffff914080fb>] device_add_disk+0x1fb/0x450 [ 983.544888] [<ffffffff91580226>] loop_add+0x1e6/0x290 [ 983.550596] [<ffffffff91fec358>] loop_init+0x10b/0x14f [ 983.556394] [<ffffffff91002207>] do_one_initcall+0xa7/0x180 [ 983.562618] [<ffffffff91f932e0>] kernel_init_freeable+0x1cc/0x266 [ 983.569370] [<ffffffff918174be>] kernel_init+0xe/0x100 [ 983.575166] [<ffffffff9182620f>] ret_from_fork+0x1f/0x40 [ 983.581131] -> #1 (loop_index_mutex){+.+.+.}: [ 983.585801] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.591858] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.598256] [<ffffffff9157ed3f>] lo_open+0x1f/0x60 [ 983.603704] [<ffffffff9128eec3>] __blkdev_get+0x123/0x400 [ 983.609757] [<ffffffff9128f4ea>] blkdev_get+0x34a/0x350 [ 983.615639] [<ffffffff9128f554>] blkdev_open+0x64/0x80 [ 983.621428] [<ffffffff9124aff6>] do_dentry_open+0x1c6/0x2d0 [ 983.627651] [<ffffffff9124c029>] vfs_open+0x69/0x80 [ 983.633181] [<ffffffff9125db74>] path_openat+0x834/0xaa0 [ 983.639152] [<ffffffff9125ef75>] do_filp_open+0x85/0xe0 [ 983.645035] [<ffffffff9124c41c>] do_sys_open+0x14c/0x1f0 [ 983.650999] [<ffffffff9124c4de>] SyS_open+0x1e/0x20 [ 983.656535] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.663541] -> #0 (&bdev->bd_mutex){+.+.+.}: [ 983.668107] [<ffffffff910def43>] __lock_acquire+0x1003/0x17b0 [ 983.674510] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.680561] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.686967] [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.692761] [<ffffffffc033481f>] btrfs_close_bdev+0x4f/0x60 [btrfs] [ 983.699699] [<ffffffffc033d77b>] __btrfs_close_devices+0xcb/0x200 [btrfs] [ 983.707178] [<ffffffffc033d8db>] btrfs_close_devices+0x2b/0xa0 [btrfs] [ 983.714380] [<ffffffffc03081c5>] close_ctree+0x265/0x340 [btrfs] [ 983.721061] [<ffffffffc02d7959>] btrfs_put_super+0x19/0x20 [btrfs] [ 983.727908] [<ffffffff91250e2f>] generic_shutdown_super+0x6f/0x100 [ 983.734744] [<ffffffff91250f56>] kill_anon_super+0x16/0x30 [ 983.740888] [<ffffffffc02da97e>] btrfs_kill_super+0x1e/0x130 [btrfs] [ 983.747909] [<ffffffff91250fe9>] deactivate_locked_super+0x49/0x80 [ 983.754745] [<ffffffff912515fd>] deactivate_super+0x5d/0x70 [ 983.760977] [<ffffffff91270a1c>] cleanup_mnt+0x5c/0x80 [ 983.766773] [<ffffffff91270a92>] __cleanup_mnt+0x12/0x20 [ 983.772738] [<ffffffff910aa2fe>] task_work_run+0x7e/0xc0 [ 983.778708] [<ffffffff91081b5a>] exit_to_usermode_loop+0x7e/0xb4 [ 983.785373] [<ffffffff910039eb>] syscall_return_slowpath+0xbb/0xd0 [ 983.792212] [<ffffffff9182605c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 [ 983.799225] [ 983.799225] other info that might help us debug this: [ 983.799225] [ 983.807291] Chain exists of: &bdev->bd_mutex --> namespace_sem --> &fs_devs->device_list_mutex [ 983.816521] Possible unsafe locking scenario: [ 983.816521] [ 983.822489] CPU0 CPU1 [ 983.827043] ---- ---- [ 983.831599] lock(&fs_devs->device_list_mutex); [ 983.836289] lock(namespace_sem); [ 983.842268] lock(&fs_devs->device_list_mutex); [ 983.849478] lock(&bdev->bd_mutex); [ 983.853127] [ 983.853127] *** DEADLOCK *** [ 983.853127] [ 983.859113] 3 locks held by umount/21720: [ 983.863145] #0: (&type->s_umount_key#35){++++..}, at: [<ffffffff912515f5>] deactivate_super+0x55/0x70 [ 983.872713] #1: (uuid_mutex){+.+.+.}, at: [<ffffffffc033d8d3>] btrfs_close_devices+0x23/0xa0 [btrfs] [ 983.882206] #2: (&fs_devs->device_list_mutex){+.+...}, at: [<ffffffffc033d6f6>] __btrfs_close_devices+0x46/0x200 [btrfs] [ 983.893422] [ 983.893422] stack backtrace: [ 983.897824] CPU: 6 PID: 21720 Comm: umount Not tainted 4.8.0-rc5-ceph-00023-g1b39cec2 #1 [ 983.905958] Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 1.0c 09/07/2015 [ 983.913492] 0000000000000000 ffff8c8a53c17a38 ffffffff91429521 ffffffff9260f4f0 [ 983.921018] ffffffff92642760 ffff8c8a53c17a88 ffffffff911b2b04 0000000000000050 [ 983.928542] ffffffff9237d620 ffff8c8a5294aee0 ffff8c8a5294aeb8 ffff8c8a5294aee0 [ 983.936072] Call Trace: [ 983.938545] [<ffffffff91429521>] dump_stack+0x85/0xc4 [ 983.943715] [<ffffffff911b2b04>] print_circular_bug+0x1fb/0x20c [ 983.949748] [<ffffffff910def43>] __lock_acquire+0x1003/0x17b0 [ 983.955613] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.961123] [<ffffffff9128ec51>] ? blkdev_put+0x31/0x150 [ 983.966550] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.972407] [<ffffffff9128ec51>] ? blkdev_put+0x31/0x150 [ 983.977832] [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.983101] [<ffffffffc033481f>] btrfs_close_bdev+0x4f/0x60 [btrfs] [ 983.989500] [<ffffffffc033d77b>] __btrfs_close_devices+0xcb/0x200 [btrfs] [ 983.996415] [<ffffffffc033d8db>] btrfs_close_devices+0x2b/0xa0 [btrfs] [ 984.003068] [<ffffffffc03081c5>] close_ctree+0x265/0x340 [btrfs] [ 984.009189] [<ffffffff9126cc5e>] ? evict_inodes+0x15e/0x170 [ 984.014881] [<ffffffffc02d7959>] btrfs_put_super+0x19/0x20 [btrfs] [ 984.021176] [<ffffffff91250e2f>] generic_shutdown_super+0x6f/0x100 [ 984.027476] [<ffffffff91250f56>] kill_anon_super+0x16/0x30 [ 984.033082] [<ffffffffc02da97e>] btrfs_kill_super+0x1e/0x130 [btrfs] [ 984.039548] [<ffffffff91250fe9>] deactivate_locked_super+0x49/0x80 [ 984.045839] [<ffffffff912515fd>] deactivate_super+0x5d/0x70 [ 984.051525] [<ffffffff91270a1c>] cleanup_mnt+0x5c/0x80 [ 984.056774] [<ffffffff91270a92>] __cleanup_mnt+0x12/0x20 [ 984.062201] [<ffffffff910aa2fe>] task_work_run+0x7e/0xc0 [ 984.067625] [<ffffffff91081b5a>] exit_to_usermode_loop+0x7e/0xb4 [ 984.073747] [<ffffffff910039eb>] syscall_return_slowpath+0xbb/0xd0 [ 984.080038] [<ffffffff9182605c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 Reported-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Liu Bo authored
commit a958eab0 upstream. The extent buffer 'next' needs to be free'd conditionally. Signed-off-by:
-
Jeff Mahoney authored
commit cea67ab9 upstream. btrfs_rm_device frees the block device but then re-opens it using the saved device name. A race exists between the close and the re-open that allows the block size to be changed. The result is getting stuck forever in the reclaim loop in __getblk_slow. This patch moves the superblock cleanup before closing the block device, which is also consistent with other callers. We also don't need a private copy of dev_name as the whole routine operates under the uuid_mutex. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Josef Bacik authored
commit 6bdf131f upstream. We don't track the reloc roots in any sort of normal way, so the only way the root/commit_root nodes get free'd is if the relocation finishes successfully and the reloc root is deleted. Fix this by free'ing them in free_reloc_roots. Thanks, Signed-off-by:
-
Liu Bo authored
commit 3561b9db upstream. When relocating tree blocks, we firstly get block information from back references in the extent tree, we then search fs tree to try to find all parents of a block. However, if fs tree is corrupted, eg. if there're some missing items, we could come across these WARN_ONs and BUG_ONs. This makes us print some error messages and return gracefully from balance. Signed-off-by:
-
Liu Bo authored
commit 49303381 upstream. Currently we allow inconsistence about mixed flag (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA). We'd get ENOSPC if block group has mixed flag and btrfs doesn't. If that happens, we have one space_info with mixed flag and another space_info only with BTRFS_BLOCK_GROUP_METADATA, and global_block_rsv.space_info points to the latter one, but all bytes from block_group contributes to the mixed space_info, thus all the allocation will fail with ENOSPC. This adds a check for the above case. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Liu Bo authored
commit 2571e739 upstream. So we can read a btree block via readahead or intentional read, and we can end up with a memory leak when something happens as follows, 1) readahead starts to read block A but does not wait for read completion, 2) btree_readpage_end_io_hook finds that block A is corrupted, and it needs to clear all block A's pages' uptodate bit. 3) meanwhile an intentional read kicks in and checks block A's pages' uptodate to decide which page needs to be read. 4) when some pages have the uptodate bit during 3)'s check so 3) doesn't count them for eb->io_pages, but they are later cleared by 2) so we has to readpage on the page, we get the wrong eb->io_pages which results in a memory leak of this block. This fixes the problem by firstly getting all pages's locking and then checking pages' uptodate bit. t1(readahead) t2(readahead endio) t3(the following read) read_extent_buffer_pages end_bio_extent_readpage for pg in eb: for page 0,1,2 in eb: if pg is uptodate: btree_readpage_end_io_hook(pg) num_reads++ if uptodate: eb->io_pages = num_reads SetPageUptodate(pg) _______________ for pg in eb: for page 3 in eb: read_extent_buffer_pages if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb: __extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate: clear_extent_buffer_uptodate(eb) num_reads++ for pg in eb: eb->io_pages = num_reads ClearPageUptodate(page) _______________ for pg in eb: if pg is NOT uptodate: __extent_read_full_page(pg) So t3's eb->io_pages is not consistent with the number of pages it's reading, and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative number so that we're not able to free the eb. Signed-off-by:
-
Richard Watts authored
commit 035cd485 upstream. The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by:
Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Ladislav Michl <ladis@linux-mips.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Adam Ford <aford173@gmail.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 5e0ad0d8 upstream. Commit [64047d7f ALSA: hda - ignore the assoc and seq when comparing pin configurations] intented to ignore both seq and assoc at pin comparing, but it only ignored seq. So that commit may still fail to match pins on some machines. Change the bitmask to also ignore assoc. v2: Use macro to do bit masking. Thanks to Hui Wang for the analysis. Fixes: 64047d7f ("ALSA: hda - ignore the assoc and seq when comparing...") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f73cd43a upstream. HP Z1 Gen3 AiO with Conexant codec doesn't give an unsolicited event to the headset mic pin upon the jack plugging, it reports only to the headphone pin. It results in the missing mic switching. Let's fix up by simply gating the jack event. Signed-off-by:
-
Hui Wang authored
commit 989dbe4a upstream. This group of new pins is not in the pin quirk table yet, adding them to the pin quirk table to fix the headset-mic problem. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Hui Wang authored
commit 64047d7f upstream. More and more pin configurations have been adding to the pin quirk table, lots of them are only different from assoc and seq, but they all apply to the same QUIRK_FIXUP, if we don't compare assoc and seq when matching pin configurations, it will greatly reduce the pin quirk table size. We have tested this change on a couple of Dell laptops, it worked well. Signed-off-by:
-
Sven Hahne authored
commit b5337cfe upstream. I'm using an Alienware 15 R2 and had to use the alienware quirks to get my headphone output working. I fixed it by adding, SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE) to the patch. Signed-off-by:
Sven Hahne <hahne@zeitkunst.eu> Signed-off-by:
-
Jussi Laako authored
commit 995c6a7f upstream. Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
-
Con Kolivas authored
commit 82ffb6fc upstream. The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Signed-off-by:
-
Krzysztof Opasiak authored
commit 3e448e13 upstream. ep_list inside gadget structure doesn't contain ep0. It is stored separately in ep0 field. This causes an urb hang if gadget driver decides to delay setup handling. On host side this is visible as timeout error when setting configuration. This bug can be reproduced using for example any gadget with mass storage function. Fixes: abdb2957 ("usbip: vudc: Add vudc_transfer") Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Alan Stern authored
commit ccdb6be9 upstream. The UHCI controllers in Intel chipsets rely on a platform-specific non-PME mechanism for wakeup signalling. They can generate wakeup signals even though they don't support PME. We need to let the USB core know this so that it will enable runtime suspend for UHCI controllers. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Felipe Balbi authored
commit e8f29bb7 upstream. usb_endpoint_maxp() returns wMaxPacketSize in its raw form. Without taking into consideration that it also contains other bits reserved for isochronous endpoints. This patch fixes one occasion where this is a problem by making sure that we initialize ep->maxpacket only with lower 10 bits of the value returned by usb_endpoint_maxp(). Note that seperate patches will be necessary to audit all call sites of usb_endpoint_maxp() and make sure that usb_endpoint_maxp() only returns lower 10 bits of wMaxPacketSize. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Peter Chen authored
commit f1d3861d upstream. The current error handling flow uses incorrect goto label, fix it Fixes: d12a8727 ("usb: gadget: function: Remove redundant usb_free_all_descriptors") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
